100% BASÉ AU CANADA 100% CANADIEN
SANS FRAIS DE COURTAGE EN DOUANE SANS FRAIS DE DOUANE
MARCHAND AUTORISÉ MARCHAND AUTORISÉ
30 JOURS – RETOURS SANS TRACAS 30 JOURS – RETOURS

MagnaFlowUniversal Stainless Steel CARB OBDII Catalytic Converter (2.5" IN\/2.5" OUT)

DISTRIBUTEUR AUTORISÉ

459006

Numéro de Pièce du Fabricant
*Les images sont à titre illustratif seulement. Le produit réel peut varier.
SKU: MAG-459006
Sélectionnez un véhicule pour vérifier la compatibilité.

Sélectionnez un Véhicule

Cela servira à vous montrer les pièces compatibles.

Auto Parts Finder

Ce produit n'est pas compatible avec votre sélection!

Le produit affiché sur cette page n'est pas compatible avec vehicle

!
Afin d'assurer la bonne compatibilité des pièces, veuillez parcourir des produits compatibles ou changer votre sélection.


Changer la Sélection Actuelle
Livraison GRATUITE*
Garantie Standard

Commande Spéciale
1-3 Semaines
690,00 CA $
Universal Stainless Steel CARB OBDII Catalytic Converter (2.5" IN\/2.5" OUT) doit être acheté par multiple de 1
DISTRIBUTEUR AUTORISÉ

459006

Numéro de Pièce du Fabricant
Plus d’information
Fabricant MagnaFlow
Numéro de Pièce du Fabricant 459006
Prix de Détail Suggéré du Fabricant (MSRP) 314,45
Rédigez votre propre commentaire
Seuls les utilisateurs sauvegardés peuvent soumettre leur avis. Veuillez vous connecter ou créer un compte
This table represents all the 62 compatible vehicles for this part:
Marque Modèle Année
Application Notes
Position Drive Type Engine Additional Information
Cadillac Escalade 2002
  • Rear Left
  • Rear Right
  • 5.3L V8 5328CC/325CID
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
Chevrolet Avalanche 1500 2002
  • Rear Left
  • Rear Right
  • 5.3L V8 5328CC/325CID
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
Chevrolet Blazer 2003
  • Rear
  • RWD
  • 4WD
  • 4.3L V6 262CID
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
Chevrolet Blazer 2004
  • Rear
  • 4.3L V6 262CID
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
Chevrolet Blazer 2005
  • Rear
  • 4.3L V6 262CID
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
Chevrolet S10 2003
  • Rear
  • RWD
  • 4WD
  • 4.3L V6 262CID
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
Chevrolet S10 2004
  • Rear
  • 4.3L V6 262CID
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
Chevrolet Silverado 2500 HD 2005
  • Rear Left
  • Rear Right
  • 6L V8 5967CC/364CID
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
Chevrolet Silverado 2500 HD 2006
  • Rear Left
  • Rear Right
  • 6L V8 5967CC/364CID
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
Chevrolet Silverado 1500 2002
  • Rear Left
  • Rear Right
  • 5.3L V8 5328CC/325CID
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
Chevrolet Suburban 1500 2001
  • Rear Left
  • Rear Right
  • 5.3L V8 5328CC/325CID
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
Chevrolet Suburban 1500 2002
  • Rear Left
  • Rear Right
  • 5.3L V8 5328CC/325CID
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
Chevrolet Tahoe 2002
  • Rear Left
  • Rear Right
  • 5.3L V8 5328CC/325CID
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Dakota 2002
  • Rear
  • 3.9L V6 3906CC/239CID
  • 4.7L V8 287CID
  • 5.9L V8 360CID
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Durango 2000
  • Rear
  • 4.7L V8 287CID
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Durango 2001
  • Rear
  • 4.7L V8 287CID
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Durango 2002
  • Rear
  • 4.7L V8 287CID
  • 5.9L V8 360CID
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Durango 2003
  • Rear
  • 4.7L V8 287CID
  • 5.9L V8 360CID
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Ram 1500 Pickup 2001
  • Rear
  • 5.9L V8 360CID
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Ram 1500 Pickup 2002
  • Rear
  • 4.7L V8 287CID
  • 5.9L V8 360CID
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Ram 1500 Pickup 2003
  • Rear
  • 4.7L V8 287CID
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Ram 1500 Pickup 2005
  • Rear Left
  • Rear Right
  • 8.3L V10 8275CC/505CID
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Ram 1500 Pickup 2006
  • Rear Left
  • Rear Right
  • 8.3L V10 8275CC/505CID
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Ram 1500 Van 2001
  • Rear
  • 5.9L V8 360CID
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Ram 1500 Van 2002
  • Rear
  • 5.9L V8 360CID
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Ram 2500 Pickup 2001
  • Rear
  • 5.9L V8 360CID
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Ram 2500 Pickup 2002
  • Rear
  • 5.9L V8 360CID
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Ram 2500 Van 2001
  • Rear
  • 5.9L V8 360CID
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Ram 2500 Van 2002
  • Rear
  • 5.9L V8 360CID
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Ram 3500 Pickup 2001
  • Rear
  • 5.9L V8 360CID
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Ram 3500 Van 2001
  • Rear
  • 5.9L V8 360CID
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Ram 3500 Van 2002
  • Rear
  • 5.9L V8 360CID
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
Ford F-150 2002
  • Rear Left
  • Rear Right
  • 4WD
  • 5.4L V8 330CID
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Ranger 2004
  • Rear
  • 4L V6 245CID
  • 3L V6 2986CC/182CID
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Ranger 2005
  • Rear
  • 4L V6 245CID
  • 3L V6 2986CC/182CID
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Ranger 2006
  • Rear
  • 4L V6 245CID
  • 3L V6 2986CC/182CID
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
GMC Sierra 2500 HD 2006
  • Rear Left
  • Rear Right
  • 6L V8 5967CC/364CID
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
GMC Sierra 1500 2002
  • Rear Left
  • Rear Right
  • 5.3L V8 5328CC/325CID
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
GMC Sonoma 2003
  • Rear
  • 4.3L V6 262CID
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
GMC Sonoma 2004
  • Rear
  • 4.3L V6 262CID
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
GMC Yukon 2002
  • Rear Left
  • Rear Right
  • 5.3L V8 5328CC/325CID
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
GMC Yukon XL 1500 2001
  • Rear Left
  • Rear Right
  • 5.3L V8 5328CC/325CID
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
GMC Yukon XL 1500 2002
  • Rear Left
  • Rear Right
  • 5.3L V8 5328CC/325CID
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
Hyundai Santa Fe 2003
  • Rear
  • 3.5L V6 3500CC
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
Hyundai Santa Fe 2004
  • Rear
  • 3.5L V6 3500CC
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
Jeep Grand Cherokee 2001
  • Rear
  • 4L L6 242CID
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
Jeep Grand Cherokee 2002
  • Rear
  • 4L L6 242CID
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
Jeep Grand Cherokee 2003
  • Rear
  • 4.7L V8 287CID
  • 4L L6 242CID
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
Jeep Grand Cherokee 2004
  • Rear
  • 4.7L V8 287CID
  • 4L L6 242CID
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
Jeep Liberty 2003
  • Rear
  • 3.7L V6 226CID
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
Lincoln Aviator 2004
  • Rear
  • 4.6L V8 281CID
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
Lincoln Aviator 2005
  • Rear
  • 4.6L V8 281CID
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda B3000 2004
  • Rear
  • 3L V6 2986CC/182CID
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda B3000 2005
  • Rear
  • 3L V6 2986CC/182CID
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda B3000 2006
  • Rear
  • 3L V6 2986CC/182CID
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda B4000 2004
  • Rear
  • 4L V6 245CID
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda B4000 2005
  • Rear
  • 4L V6 245CID
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda B4000 2006
  • Rear
  • 4L V6 245CID
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
Porsche Cayenne 2003
  • Rear Left
  • Rear Right
  • 4.5L V8 4511CC
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
Porsche Cayenne 2004
  • Rear Left
  • Rear Right
  • 4.5L V8 4511CC
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
Porsche Cayenne 2005
  • Rear Left
  • Rear Right
  • 4.5L V8 4511CC
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation
Porsche Cayenne 2006
  • Rear Left
  • Rear Right
  • 4.5L V8 4511CC
  • Certification Level : LEV1 ULEV
  • OE Spec
  • Cutting and Welding Required During Installation