100% BASÉ AU CANADA 100% CANADIEN
SANS FRAIS DE COURTAGE EN DOUANE SANS FRAIS DE DOUANE
MARCHAND AUTORISÉ MARCHAND AUTORISÉ
30 JOURS – RETOURS SANS TRACAS 30 JOURS – RETOURS

MagnaFlowStainless Federal Catalytic Converter without Sensor Port (2" IN\/2" OUT)

DISTRIBUTEUR AUTORISÉ

94014

Numéro de Pièce du Fabricant
*Les images sont à titre illustratif seulement. Le produit réel peut varier.
SKU: MAG-94014
Sélectionnez un véhicule pour vérifier la compatibilité.

Sélectionnez un Véhicule

Cela servira à vous montrer les pièces compatibles.

Auto Parts Finder

Ce produit n'est pas compatible avec votre sélection!

Le produit affiché sur cette page n'est pas compatible avec vehicle

!
Afin d'assurer la bonne compatibilité des pièces, veuillez parcourir des produits compatibles ou changer votre sélection.


Changer la Sélection Actuelle
Livraison GRATUITE*
Garantie Standard

Commande Spéciale
1-3 Semaines
169,00 CA $
Stainless Federal Catalytic Converter without Sensor Port (2" IN\/2" OUT) doit être acheté par multiple de 1
DISTRIBUTEUR AUTORISÉ

94014

Numéro de Pièce du Fabricant
Plus d’information
Fabricant MagnaFlow
Numéro de Pièce du Fabricant 94014
Prix de Détail Suggéré du Fabricant (MSRP) 117,07
Rédigez votre propre commentaire
Seuls les utilisateurs sauvegardés peuvent soumettre leur avis. Veuillez vous connecter ou créer un compte
This table represents all the 428 compatible vehicles for this part:
MarqueModèleAnnée
Application Notes
PositionSubmodelTransmissionDrive TypeEngineAspirationAdditional Information
Alfa Romeo
Spider1990
  • 2L L4 1961CC/120CID
  • Cutting and Welding Required During Installation
Alfa Romeo
Spider1991
  • 2L L4 1961CC/120CID
  • Cutting and Welding Required During Installation
Alfa Romeo
Spider1992
  • 2L L4 1961CC/120CID
  • Cutting and Welding Required During Installation
American Motors
AMX1980
  • Rear
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
American Motors
Concord1980
  • Rear
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
American Motors
Concord1981
  • Rear
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
American Motors
Concord1982
  • Rear
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
American Motors
Concord1983
  • Rear
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
American Motors
Eagle1981
  • Rear
  • DL SX4
  • SX4
  • 4.2L L6 258CID
  • 2.5L L4 151CID
  • Cutting and Welding Required During Installation
  • Air Tube
American Motors
Eagle1982
  • Rear
  • DL SX4
  • SX4
  • 4.2L L6 258CID
  • 2.5L L4 151CID
  • Cutting and Welding Required During Installation
  • Air Tube
American Motors
Eagle1983
  • Rear
  • DL SX4
  • SX4
  • 4.2L L6 258CID
  • 2.5L L4 150CID
  • 2.5L L4 151CID
  • Cutting and Welding Required During Installation
  • Air Tube
American Motors
Eagle1984
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
American Motors
Eagle1985
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
American Motors
Eagle1986
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
American Motors
Eagle1987
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
American Motors
Eagle1988
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
American Motors
Spirit1980
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
American Motors
Spirit1981
  • Rear
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
American Motors
Spirit1982
  • Rear
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
American Motors
Spirit1983
  • Rear
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
BMW
320i1977
  • 2L L4 1990CC/121CID
  • Cutting and Welding Required During Installation
BMW
320i1978
  • 2L L4 1990CC/121CID
  • Cutting and Welding Required During Installation
BMW
320i1979
  • 2L L4 1990CC/121CID
  • Cutting and Welding Required During Installation
Buick
Century1982
  • 3L V6 181CID
  • Cutting and Welding Required During Installation
Buick
Century1983
  • 3L V6 181CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
  • CAN
Buick
Century1984
  • 3.8L V6 3800CC/231CID
  • 3L V6 181CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
  • CAN
Buick
Century1985
  • 3.8L V6 3800CC/231CID
  • 3L V6 181CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
  • CAN
Buick
Skyhawk1983
  • 1.8L L4 112CID
  • 2L L4 122CID
  • Air Tube
  • Cutting and Welding Required During Installation
Buick
Skyhawk1984
  • 1.8L L4 112CID
  • 2L L4 122CID
  • Naturally Aspirated
  • without Air Tube
  • Cutting and Welding Required During Installation
Buick
Skylark1982
  • 2.8L V6 173CID
  • X
  • Cutting and Welding Required During Installation
Buick
Skylark1983
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Buick
Skylark1984
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Buick
Skylark1985
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet
Camaro1982
  • 2.8L V6 173CID
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
  • Air Tube
Chevrolet
Camaro1983
  • 2.5L L4 2474CC/151CID
  • without Air Tube
  • Cutting and Welding Required During Installation
Chevrolet
Cavalier1983
  • 2L L4 122CID
  • Cutting and Welding Required During Installation
  • CAN
Chevrolet
Cavalier1984
  • 2L L4 122CID
  • without Air Tube
  • Cutting and Welding Required During Installation
Chevrolet
Celebrity1982
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet
Celebrity1983
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet
Celebrity1984
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet
Celebrity1985
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet
Celebrity1986
  • 2.8L V6 173CID
  • X
  • CARB
  • Cutting and Welding Required During Installation
Chevrolet
Chevette1981
  • 1.6L L4 98cCID
  • Cutting and Welding Required During Installation
Chevrolet
Chevette1982
  • 1.6L L4 98cCID
  • Cutting and Welding Required During Installation
Chevrolet
Chevette1983
  • 1.6L L4 98cCID
  • Cutting and Welding Required During Installation
Chevrolet
Chevette1984
  • 1.6L L4 98cCID
  • Cutting and Welding Required During Installation
Chevrolet
Chevette1985
  • 1.6L L4 98cCID
  • Cutting and Welding Required During Installation
Chevrolet
Chevette1986
  • 1.6L L4 98cCID
  • Cutting and Welding Required During Installation
Chevrolet
Chevette1987
  • 1.6L L4 98cCID
  • Cutting and Welding Required During Installation
Chevrolet
Citation1982
  • 2.8L V6 173CID
  • X
  • Cutting and Welding Required During Installation
Chevrolet
Citation1983
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet
Citation II1984
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet
Citation II1985
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet
Nova1985
  • 1.6L L4 1588CC/98cCID
  • Cutting and Welding Required During Installation
Chevrolet
Nova1986
  • 1.6L L4 1588CC/98cCID
  • Cutting and Welding Required During Installation
Chevrolet
Nova1987
  • 1.6L L4 1588CC/98cCID
  • Cutting and Welding Required During Installation
Chevrolet
Nova1988
  • 1.6L L4 1588CC/98cCID
  • 4
  • Cutting and Welding Required During Installation
Chrysler
Cordoba1980
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Chrysler
Cordoba1981
  • 3.7L L6 3687CC/225CID
  • Air Tube
  • Cutting and Welding Required During Installation
Chrysler
Cordoba1982
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Chrysler
Cordoba1983
  • 3.7L L6 3687CC/225CID
  • Air Tube
  • Cutting and Welding Required During Installation
Chrysler
Daytona1987
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
  • CAN
Chrysler
Daytona1988
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
  • CAN
Chrysler
Daytona1989
  • Rear
  • 2.5L L4 2507CC/153CID
  • Naturally Aspirated
  • Air Tube
  • CAN
  • Cutting and Welding Required During Installation
Chrysler
Daytona1990
  • Rear
  • 2.5L L4 2507CC/153CID
  • Naturally Aspirated
  • Air Tube
  • CAN
  • Cutting and Welding Required During Installation
Chrysler
Daytona1991
  • Rear
  • 2.5L L4 2507CC/153CID
  • Naturally Aspirated
  • Air Tube
  • CAN
  • Cutting and Welding Required During Installation
Chrysler
Daytona1992
  • Rear
  • 2.5L L4 2507CC/153CID
  • Naturally Aspirated
  • Air Tube
  • CAN
  • Cutting and Welding Required During Installation
Chrysler
Daytona1993
  • Rear
  • 2.5L L4 2507CC/153CID
  • Air Tube
  • CAN
  • Cutting and Welding Required During Installation
Chrysler
E Class1983
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Chrysler
E Class1984
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Chrysler
Fifth Avenue1983
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Chrysler
Laser1984
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Chrysler
Laser1985
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Chrysler
Laser1986
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Chrysler
LeBaron1980
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Chrysler
LeBaron1982
  • Front
  • Rear
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Chrysler
LeBaron1983
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Chrysler
LeBaron1984
  • 2.2L L4 135CID
  • C
  • Cutting and Welding Required During Installation
  • D
Chrysler
LeBaron1985
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Chrysler
LeBaron1986
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Chrysler
LeBaron1987
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Chrysler
LeBaron1988
  • Base
  • GTS
  • Premium
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Chrysler
LeBaron1989
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Chrysler
LeBaron1990
  • 2.5L L4 2507CC/153CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Chrysler
LeBaron1991
  • 2.5L L4 2507CC/153CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Chrysler
LeBaron1992
  • 2.5L L4 2507CC/153CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Chrysler
LeBaron1993
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Chrysler
New Yorker1982
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Chrysler
New Yorker1983
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Chrysler
New Yorker1984
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Chrysler
New Yorker1986
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Chrysler
New Yorker1987
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Chrysler
Town & Country1986
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Chrysler
Town & Country1987
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Chrysler
Town & Country1988
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Dodge
4001982
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge
4001983
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge
6001983
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge
6001984
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge
6001985
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge
6001986
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge
6001987
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge
6001988
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge
Aries1981
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge
Aries1982
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge
Aries1983
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge
Aries1984
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge
Aries1985
  • 2.2L L4 135CID
  • C
  • Cutting and Welding Required During Installation
Dodge
Aries1986
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge
Aries1987
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge
Aries1988
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge
Aries1989
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge
Caravan1984
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge
Caravan1985
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge
Caravan1986
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge
Caravan1987
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge
Charger1983
  • Rear
  • 1.6L L4 1595CC/97cCID
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
  • Air Tube
Dodge
Charger1984
  • 1.6L L4 1595CC/97cCID
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge
Charger1985
  • Front
  • 2.2L L4 135CID
  • 1.6L L4 1595CC/97cCID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
  • Air Tube
Dodge
Charger1986
  • Front
  • 2.2L L4 135CID
  • 1.6L L4 1595CC/97cCID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
  • Air Tube
Dodge
Dakota1987
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge
Dakota1988
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge
Daytona1984
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge
Daytona1985
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge
Daytona1986
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge
Daytona1987
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Dodge
Daytona1988
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Dodge
Daytona1989
  • 2.5L L4 2507CC/153CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge
Daytona1990
  • 2.5L L4 2507CC/153CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge
Daytona1991
  • 2.5L L4 2507CC/153CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge
Daytona1992
  • 2.5L L4 2507CC/153CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge
Daytona1993
  • 2.5L L4 2507CC/153CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge
Diplomat1982
  • Rear
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Dodge
Diplomat1983
  • 3.7L L6 3687CC/225CID
  • Air Tube
  • Cutting and Welding Required During Installation
Dodge
Lancer1985
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge
Lancer1986
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge
Lancer1987
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge
Lancer1988
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge
Lancer1989
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge
Mini Ram1984
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge
Mini Ram1985
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge
Mini Ram1986
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge
Mini Ram1987
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge
Mirada1982
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Dodge
Mirada1983
  • 3.7L L6 3687CC/225CID
  • Air Tube
  • Cutting and Welding Required During Installation
Dodge
Omni1980
  • 1.7L L4 105CID
  • Cutting and Welding Required During Installation
Dodge
Omni1981
  • Front
  • Rear
  • 1.7L L4 105CID
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge
Omni1982
  • Front
  • Rear
  • 1.7L L4 105CID
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge
Omni1983
  • Rear
  • Front
  • 1.6L L4 1595CC/97cCID
  • 1.7L L4 105CID
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge
Omni1984
  • 1.6L L4 1595CC/97cCID
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge
Omni1985
  • 1.6L L4 1595CC/97cCID
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge
Omni1986
  • 1.6L L4 1595CC/97cCID
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge
Omni1987
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge
Omni1988
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge
Omni1989
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge
Omni1990
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge
Rampage1982
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge
Rampage1983
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge
Rampage1984
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge
Shadow1987
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge
Shadow1988
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge
Shadow1989
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge
Shadow1990
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge
Shadow1991
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge
Shadow1992
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge
Shadow1993
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge
Shadow1994
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge
Spirit1989
  • 2.5L L4 2507CC/153CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge
Spirit1990
  • 2.5L L4 2507CC/153CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge
Spirit1991
  • 2.5L L4 2507CC/153CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge
Spirit1992
  • 2.5L L4 2507CC/153CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge
Spirit1993
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Dodge
Spirit1994
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Dodge
Spirit1995
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Ford
Escort1981
  • 1.6L L4 1598CC/98cCID
  • Cutting and Welding Required During Installation
Ford
Escort1982
  • 1.6L L4 1598CC/98cCID
  • Cutting and Welding Required During Installation
Ford
EXP1982
  • 1.6L L4 1598CC/98cCID
  • Cutting and Welding Required During Installation
Ford
Festiva1988
  • 1.3L L4 1295CC
  • Cutting and Welding Required During Installation
Ford
Festiva1989
  • Standard
  • 1.3L L4 1295CC
  • Cutting and Welding Required During Installation
Ford
LTD1980
  • Left
  • Right
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford
LTD1981
  • Left
  • Right
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.2L V8 255CID
  • Cutting and Welding Required During Installation
Ford
LTD1982
  • Left
  • Right
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.2L V8 255CID
  • Cutting and Welding Required During Installation
Ford
LTD1983
  • Left
  • Right
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford
LTD1984
  • Left
  • Right
  • 5L V8 302CID
  • 5.8L V8 351CID
  • F
  • FI
  • Cutting and Welding Required During Installation
Ford
LTD1985
  • Left
  • Right
  • 5L V8 302CID
  • 5.8L V8 351CID
  • F
  • FI
  • Cutting and Welding Required During Installation
Ford
LTD1986
  • Left
  • Right
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford
LTD Crown Victoria1987
  • Left
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford
LTD Crown Victoria1988
  • Left
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford
LTD Crown Victoria1989
  • Left
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford
LTD Crown Victoria1990
  • Left
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford
LTD Crown Victoria1991
  • Left
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford
Mustang1981
  • Rear
  • 4.2L V8 255CID
  • Air Tube
  • USA
  • Cutting and Welding Required During Installation
Ford
Mustang1983
  • 2.3L L4 140CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Ford
Pinto1980
  • Rear
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Ford
Ranger1983
  • 2L L4 1989CC/122CID
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
  • Excluding High Altitude Package
Ford
Ranger1984
  • 2L L4 1989CC/122CID
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
  • Excluding High Altitude Package
Ford
Ranger1985
  • 2L L4 1989CC/122CID
  • Cutting and Welding Required During Installation
Ford
Ranger1986
  • 2L L4 1989CC/122CID
  • Cutting and Welding Required During Installation
Ford
Ranger1987
  • 2L L4 1989CC/122CID
  • Cutting and Welding Required During Installation
Ford
Ranger1988
  • 2L L4 1989CC/122CID
  • Cutting and Welding Required During Installation
Ford
Ranger1989
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Ford
Ranger1990
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Ford
Ranger1991
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Ford
Ranger1992
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Ford
Ranger1993
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Ford
Ranger1994
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Ford
Thunderbird1983
  • Right
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Ford
Thunderbird1984
  • Right
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Ford
Thunderbird1985
  • Right
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Hyundai
Pony1983
  • 1.4L L4 1393CC/85cCID
  • Cutting and Welding Required During Installation
  • CAN
Hyundai
Pony1984
  • 1.4L L4 1393CC/85cCID
  • Cutting and Welding Required During Installation
  • CAN
Hyundai
Pony1985
  • 1.4L L4 1393CC/85cCID
  • Cutting and Welding Required During Installation
  • CAN
Hyundai
Pony1986
  • 1.4L L4 1393CC/85cCID
  • Cutting and Welding Required During Installation
  • CAN
Hyundai
Pony1987
  • 1.4L L4 1393CC/85cCID
  • Cutting and Welding Required During Installation
  • CAN
Hyundai
Stellar1985
  • 1.6L L4 1596CC
  • Cutting and Welding Required During Installation
  • CAN
Hyundai
Stellar1986
  • 1.6L L4 1596CC
  • Cutting and Welding Required During Installation
  • CAN
Hyundai
Stellar1987
  • 2L L4 1997CC
  • Cutting and Welding Required During Installation
  • CAN
Jeep
Cherokee1981
  • 4.2L L6 258CID
  • Air Tube
  • Cutting and Welding Required During Installation
Jeep
Cherokee1982
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
Jeep
Cherokee1983
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
Jeep
Cherokee1984
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep
Cherokee1985
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep
CJ51982
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
Jeep
CJ51983
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
Jeep
CJ71982
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
Jeep
CJ71983
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
Jeep
CJ71984
  • 4.2L L6 258CID
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep
CJ71985
  • 4.2L L6 258CID
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep
CJ71986
  • 4.2L L6 258CID
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep
Grand Wagoneer1984
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
Jeep
Grand Wagoneer1985
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
Jeep
Grand Wagoneer1986
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
Jeep
J101982
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
Jeep
J101983
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
Jeep
J101984
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
Jeep
J101985
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
Jeep
J101986
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
Jeep
J101987
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
Jeep
Scrambler1982
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
Jeep
Scrambler1983
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
Jeep
Scrambler1984
  • 4.2L L6 258CID
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep
Scrambler1985
  • 4.2L L6 258CID
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep
Wagoneer1981
  • 4.2L L6 258CID
  • Air Tube
  • Cutting and Welding Required During Installation
Jeep
Wagoneer1982
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
Jeep
Wagoneer1983
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
Jeep
Wagoneer1984
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep
Wagoneer1985
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep
Wrangler1987
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
Jeep
Wrangler1988
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
Jeep
Wrangler1989
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
Jeep
Wrangler1990
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
Laforza
Laforza1989
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Laforza
Laforza1990
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Lincoln
Mark VI1980
  • Left
  • Right
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Lincoln
Mark VI1981
  • Left
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Lincoln
Mark VI1982
  • Left
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Lincoln
Mark VI1983
  • Left
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Lincoln
Mark VII1984
  • Right
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Lincoln
Mark VII1985
  • Right
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Lincoln
Town Car1981
  • Left
  • Right
  • 5L V8 302CID
  • Air Tube
  • Cutting and Welding Required During Installation
Lincoln
Town Car1982
  • Left
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Lincoln
Town Car1983
  • Left
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Lincoln
Town Car1984
  • Left
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Lincoln
Town Car1985
  • Left
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Mazda
RX-71981
  • Rear
  • 1.1L R2 1146CC
  • Cutting and Welding Required During Installation
Mazda
RX-71982
  • Rear
  • 1.1L R2 1146CC
  • Cutting and Welding Required During Installation
Mazda
RX-71983
  • Rear
  • 1.1L R2 1146CC
  • Cutting and Welding Required During Installation
Mazda
RX-71984
  • Rear
  • N/A
  • 1.1L R2 1146CC
  • 1.3L R2 1308CC
  • Cutting and Welding Required During Installation
Mazda
RX-71985
  • Rear
  • Front Forward
  • 1.1L R2 1146CC
  • 1.3L R2 1308CC
  • Cutting and Welding Required During Installation
Mazda
RX-71986
  • Rear
  • 1.3L R2 1308CC
  • Cutting and Welding Required During Installation
Mazda
RX-71987
  • Rear
  • 1.3L R2 1308CC
  • Cutting and Welding Required During Installation
Mazda
RX-71988
  • Rear
  • 1.3L R2 1308CC
  • Cutting and Welding Required During Installation
Mazda
RX-71989
  • Rear
  • 1.3L R2 1308CC
  • Cutting and Welding Required During Installation
Mazda
RX-71990
  • Rear
  • 1.3L R2 1308CC
  • Cutting and Welding Required During Installation
Mazda
RX-71991
  • Rear
  • 1.3L R2 1308CC
  • Cutting and Welding Required During Installation
Mercury
Bobcat1980
  • Rear
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Mercury
Capri1983
  • Rear
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Mercury
Cougar1983
  • Right
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Mercury
Cougar1984
  • Right
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Mercury
Cougar1985
  • Right
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Mercury
Grand Marquis1980
  • Left
  • Right
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Mercury
Grand Marquis1981
  • Left
  • Right
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.2L V8 255CID
  • Cutting and Welding Required During Installation
Mercury
Grand Marquis1982
  • Left
  • 5L V8 302CID
  • 4.2L V8 255CID
  • Cutting and Welding Required During Installation
Mercury
Grand Marquis1983
  • Left
  • Right
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
  • CAN
Mercury
Grand Marquis1984
  • Left
  • Right
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
  • CAN
Mercury
Grand Marquis1985
  • Left
  • Right
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
  • CAN
Mercury
Grand Marquis1986
  • Left
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Mercury
Grand Marquis1989
  • Right
  • Left
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Replaces Both Front and Rear OE Converters
  • Air Tube
  • Cutting and Welding Required During Installation
  • CAN
Mercury
LN71982
  • 1.6L L4 1598CC/98cCID
  • Cutting and Welding Required During Installation
Mercury
Lynx1981
  • 1.6L L4 1598CC/98cCID
  • Cutting and Welding Required During Installation
Mercury
Lynx1982
  • 1.6L L4 1598CC/98cCID
  • Cutting and Welding Required During Installation
Mercury
Marquis1980
  • Left
  • Right
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Mercury
Marquis1981
  • Left
  • Right
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.2L V8 255CID
  • Cutting and Welding Required During Installation
Mercury
Marquis1982
  • Left
  • 5L V8 302CID
  • 4.2L V8 255CID
  • Cutting and Welding Required During Installation
Mitsubishi
Galant1987
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Nissan
Micra1984
  • 1.2L L4 1229CC/75cCID
  • Cutting and Welding Required During Installation
  • CAN
Nissan
Micra1985
  • 1.2L L4 1229CC/75cCID
  • Cutting and Welding Required During Installation
  • CAN
Nissan
Micra1986
  • 1.2L L4 1229CC/75cCID
  • Cutting and Welding Required During Installation
  • CAN
Nissan
Micra1987
  • 1.2L L4 1229CC/75cCID
  • Cutting and Welding Required During Installation
  • CAN
Nissan
Multi1986
  • 2L L4 1974CC/122CID
  • Cutting and Welding Required During Installation
  • CAN
Nissan
Multi1987
  • 2L L4 1974CC/122CID
  • Cutting and Welding Required During Installation
  • CAN
Nissan
Multi1988
  • 2L L4 1974CC/122CID
  • Cutting and Welding Required During Installation
  • CAN
Nissan
Sentra1987
  • 1.6L L4 1597CC/97cCID
  • FI
  • Cutting and Welding Required During Installation
Nissan
Sentra1988
  • 1.6L L4 1597CC/97cCID
  • Cutting and Welding Required During Installation
Nissan
Sentra1989
  • 1.6L L4 1597CC/97cCID
  • Cutting and Welding Required During Installation
Nissan
Sentra1990
  • 4WD
  • FWD
  • 1.6L L4 1597CC/97cCID
  • Cutting and Welding Required During Installation
  • CAN
Oldsmobile
Cutlass Ciera1982
  • 3L V6 181CID
  • 2.5L L4 2474CC/151CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
  • without Air Tube
  • Air Tube
  • CAN
Oldsmobile
Cutlass Ciera1983
  • 3L V6 181CID
  • 2.5L L4 2474CC/151CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
  • without Air Tube
  • Air Tube
  • CAN
Oldsmobile
Cutlass Ciera1984
  • 3.8L V6 3800CC/231CID
  • 3L V6 181CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
  • CAN
Oldsmobile
Cutlass Ciera1985
  • 3.8L V6 3800CC/231CID
  • 3L V6 181CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
  • CAN
Oldsmobile
Cutlass Ciera1986
  • 2.8L V6 173CID
  • X
  • CARB
  • Cutting and Welding Required During Installation
Oldsmobile
Firenza1983
  • 1.8L L4 112CID
  • 2L L4 122CID
  • without Air Tube
  • Cutting and Welding Required During Installation
  • Air Tube
  • CAN
Oldsmobile
Firenza1984
  • 1.8L L4 112CID
  • 2L L4 122CID
  • without Air Tube
  • Cutting and Welding Required During Installation
Oldsmobile
Firenza1986
  • 1.8L L4 112CID
  • 2L L4 122CID
  • without Air Tube
  • Cutting and Welding Required During Installation
Oldsmobile
Omega1981
  • 2.5L L4 2474CC/151CID
  • 2.8L V6 173CID
  • Air Tube
  • Cutting and Welding Required During Installation
Oldsmobile
Omega1982
  • 2.8L V6 173CID
  • X
  • Cutting and Welding Required During Installation
Oldsmobile
Omega1983
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Oldsmobile
Omega1984
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Peugeot
5041980
  • 2.3L L4 2304CC
  • Cutting and Welding Required During Installation
Peugeot
5041981
  • 2.3L L4 2304CC
  • Cutting and Welding Required During Installation
Peugeot
5041982
  • 2.3L L4 2304CC
  • Cutting and Welding Required During Installation
Peugeot
5041983
  • 2.3L L4 2304CC
  • Cutting and Welding Required During Installation
Peugeot
5051986
  • 2L L4 1971CC
  • without Air Tube
  • Cutting and Welding Required During Installation
Plymouth
Acclaim1989
  • 2.5L L4 2507CC/153CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Plymouth
Acclaim1990
  • 2.5L L4 2507CC/153CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Plymouth
Acclaim1991
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Plymouth
Acclaim1992
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Plymouth
Acclaim1993
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Plymouth
Acclaim1994
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Plymouth
Acclaim1995
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Plymouth
Arrow1980
  • 1.6L L4 1597CC/98cCID
  • Cutting and Welding Required During Installation
Plymouth
Caravelle1981
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
  • CAN
Plymouth
Caravelle1982
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
  • CAN
Plymouth
Caravelle1983
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
  • CAN
Plymouth
Caravelle1984
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
  • CAN
Plymouth
Caravelle1985
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Plymouth
Caravelle1986
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Plymouth
Caravelle1987
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Plymouth
Caravelle1988
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Plymouth
Gran Fury1982
  • Rear
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Plymouth
Gran Fury1983
  • Rear
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Plymouth
Horizon1980
  • 1.7L L4 105CID
  • Cutting and Welding Required During Installation
Plymouth
Horizon1981
  • Front
  • Rear
  • 1.7L L4 105CID
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Plymouth
Horizon1982
  • Front
  • Rear
  • 1.7L L4 105CID
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Plymouth
Horizon1983
  • Rear
  • Front
  • 1.6L L4 1595CC/97cCID
  • 1.7L L4 105CID
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Plymouth
Horizon1984
  • 1.6L L4 1595CC/97cCID
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Plymouth
Horizon1985
  • 1.6L L4 1595CC/97cCID
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Plymouth
Horizon1986
  • 1.6L L4 1595CC/97cCID
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Plymouth
Horizon1987
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Plymouth
Horizon1988
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Plymouth
Horizon1989
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Plymouth
Horizon1990
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Plymouth
Reliant1981
  • Rear
  • 2.2L L4 135CID
  • with Single Converter
  • Cutting and Welding Required During Installation
  • 2 Converters
Plymouth
Reliant1982
  • Rear
  • 2.2L L4 135CID
  • with Single Converter
  • Cutting and Welding Required During Installation
  • 2 Converters
Plymouth
Reliant1983
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Plymouth
Reliant1984
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Plymouth
Reliant1985
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Plymouth
Reliant1986
  • Automatic
  • Standard
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Plymouth
Reliant1987
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Plymouth
Reliant1988
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Plymouth
Reliant1989
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Plymouth
Scamp1983
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Plymouth
Sundance1987
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Plymouth
Sundance1988
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Plymouth
Sundance1989
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Plymouth
Sundance1990
  • Automatic
  • Standard
  • 2.2L L4 135CID
  • 2.5L L4 2507CC/153CID
  • Naturally Aspirated
  • Air Tube
  • Cutting and Welding Required During Installation
  • without Air Tube
Plymouth
Sundance1991
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Plymouth
Sundance1992
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Plymouth
Sundance1993
  • 2.2L L4 135CID
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
  • Air Tube
Plymouth
Sundance1994
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Plymouth
Turismo1984
  • Front
  • 1.6L L4 1595CC/97cCID
  • Air Tube
  • Cutting and Welding Required During Installation
Plymouth
Turismo1985
  • Front
  • 1.6L L4 1595CC/97cCID
  • Air Tube
  • Cutting and Welding Required During Installation
  • CAN
Plymouth
Voyager1984
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Plymouth
Voyager1985
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Plymouth
Voyager1986
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Plymouth
Voyager1987
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Pontiac
60001982
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Pontiac
60001983
  • 2.8L V6 173CID
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
  • without Air Tube
  • Air Tube
Pontiac
60001984
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Pontiac
60001985
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Pontiac
60001986
  • 2.8L V6 173CID
  • CARB
  • Cutting and Welding Required During Installation
Pontiac
Acadian1981
  • 1.6L L4 1606CC/98cCID
  • Cutting and Welding Required During Installation
  • CAN
Pontiac
Acadian1982
  • 1.6L L4 1606CC/98cCID
  • Cutting and Welding Required During Installation
  • CAN
Pontiac
Acadian1983
  • 1.6L L4 98cCID
  • Cutting and Welding Required During Installation
  • CAN
Pontiac
Acadian1984
  • 1.6L L4 98cCID
  • Cutting and Welding Required During Installation
  • CAN
Pontiac
Acadian1985
  • 1.6L L4 98cCID
  • Cutting and Welding Required During Installation
  • CAN
Pontiac
Acadian1986
  • 1.6L L4 98cCID
  • Cutting and Welding Required During Installation
  • CAN
Pontiac
Acadian1987
  • 1.6L L4 98cCID
  • Cutting and Welding Required During Installation
  • CAN
Pontiac
Firebird1982
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Pontiac
Firefly1988
  • 1L L3 993CC/61cCID
  • Cutting and Welding Required During Installation
  • CAN
Pontiac
Firefly1989
  • 1L L3 993CC/61cCID
  • Cutting and Welding Required During Installation
  • CAN
Pontiac
Optima1989
  • 2L L4 122CID
  • Cutting and Welding Required During Installation
  • CAN
Pontiac
Phoenix1982
  • 2.8L V6 173CID
  • X
  • Cutting and Welding Required During Installation
Pontiac
Phoenix1983
  • 2.5L L4 2474CC/151CID
  • 2.8L V6 173CID
  • without Air Tube
  • Cutting and Welding Required During Installation
  • Air Tube
Pontiac
Phoenix1984
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Pontiac
T10001981
  • 1.6L L4 98cCID
  • Cutting and Welding Required During Installation
Pontiac
T10001982
  • 1.6L L4 98cCID
  • Cutting and Welding Required During Installation
Pontiac
T10001983
  • 1.6L L4 98cCID
  • Cutting and Welding Required During Installation
Pontiac
T10001984
  • 1.6L L4 98cCID
  • Cutting and Welding Required During Installation
Pontiac
T10001985
  • 1.6L L4 98cCID
  • Cutting and Welding Required During Installation
Pontiac
T10001986
  • 1.6L L4 98cCID
  • Cutting and Welding Required During Installation
Pontiac
T10001987
  • 1.6L L4 98cCID
  • Cutting and Welding Required During Installation
Toyota
Corolla1983
  • 1.6L L4 1587CC
  • Cutting and Welding Required During Installation
Toyota
Corolla1984
  • Sport DLX
  • Sport SR5
  • 1.6L L4 1587CC
  • Cutting and Welding Required During Installation
Toyota
Corolla1985
  • Sport DLX
  • Sport SR5
  • LE Limited
  • LE
  • DLX
  • 1.6L L4 1587CC
  • Cutting and Welding Required During Installation
Toyota
Corolla1986
  • Sport DLX
  • Sport SR5
  • DLX
  • LE
  • LE Limited
  • 1.6L L4 1587CC
  • Cutting and Welding Required During Installation
Toyota
Corolla1987
  • Sport DLX
  • Sport SR5
  • DLX
  • FX
  • LE
  • 1.6L L4 1587CC
  • Cutting and Welding Required During Installation
Toyota
Corolla1988
  • FX16 GTS
  • GTS
  • 1.6L L4 1587CC
  • Air Tube
  • Cutting and Welding Required During Installation
Toyota
Tercel1983
  • 1.5L L4 1452CC
  • Cutting and Welding Required During Installation
Toyota
Tercel1984
  • 1.5L L4 1452CC
  • Cutting and Welding Required During Installation
Toyota
Tercel1985
  • 1.5L L4 1452CC
  • Cutting and Welding Required During Installation
Toyota
Tercel1986
  • 1.5L L4 1452CC
  • Cutting and Welding Required During Installation
Toyota
Tercel1987
  • 1.5L L4 1456CC
  • 1.5L L4 1452CC
  • Cutting and Welding Required During Installation
Toyota
Tercel1988
  • 1.5L L4 1456CC
  • 1.5L L4 1452CC
  • Cutting and Welding Required During Installation
Toyota
Tercel1989
  • 1.5L L4 1456CC
  • Cutting and Welding Required During Installation
Toyota
Tercel1990
  • 1.5L L4 1456CC
  • Cutting and Welding Required During Installation
Volkswagen
Rabbit1982
  • 1.7L L4 1715CC
  • CARB
  • Cutting and Welding Required During Installation
Volkswagen
Rabbit1983
  • 1.7L L4 1715CC
  • CARB
  • Cutting and Welding Required During Installation
Volkswagen
Rabbit1984
  • 1.7L L4 1715CC
  • CARB
  • Cutting and Welding Required During Installation
Yugo
GV1986
  • 1.1L L4 1116CC
  • Cutting and Welding Required During Installation
Yugo
GV1987
  • 1.1L L4 1116CC
  • Cutting and Welding Required During Installation
Yugo
GV1988
  • 1.1L L4 1116CC
  • Cutting and Welding Required During Installation
Yugo
GV1989
  • 1.1L L4 1116CC
  • Cutting and Welding Required During Installation
Yugo
GVL1988
  • 1.1L L4 1116CC
  • Cutting and Welding Required During Installation
Yugo
GVL1989
  • 1.1L L4 1116CC
  • Cutting and Welding Required During Installation
Yugo
GVS1988
  • 1.1L L4 1116CC
  • Cutting and Welding Required During Installation
Yugo
GVX1988
  • 1.3L L4 1301CC
  • Cutting and Welding Required During Installation
Yugo
GVX1989
  • 1.3L L4 1301CC
  • Cutting and Welding Required During Installation