100% CANADIAN BASED 100% CANADIAN
NO DUTIES OR CUSTOMS FEES NO CUSTOMS FEES
AUTHORIZED DEALER AUTH. DEALER
30-DAY HASSLE-FREE RETURNS 30-DAY RETURNS

MagnaFlowStainless Federal Catalytic Converter without Sensor Port (2.25" IN\/2.25" OUT)

AUTHORIZED DEALER

91005

Manufacturer Part Number
*Images are for illustrative purpose only. Actual Product may differ.
SKU: MAG-91005
Please select a vehicle to verify fitment.

Please Select a Vehicle

This will be used to show you compatible parts.

Auto Parts Finder

This product doesn't fit your selection!

The product shown on this page is not compatible with the selected vehicle

!
To ensure proper parts fitment, please browse compatible products or change your selection.


Change Current Selection
FREE Shipping*
Standard Warranty

Pedido Especial
1-3 Semanas
CA $134.00
Stainless Federal Catalytic Converter without Sensor Port (2.25" IN\/2.25" OUT) is available to buy in increments of 1
AUTHORIZED DEALER

91005

Manufacturer Part Number
More Information
Fabricante MagnaFlow
Número de Pieza del Fabricante 91005
Precio de Venta Sugerido por el Fabricante (MSRP) 105.52
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
This table represents all the 556 compatible vehicles for this part:
MakeModelYear
Application Notes
PositionSubmodelTransmissionBody TypeDrive TypeEngineAspirationAdditional Information
Audi
V8 Quattro1992
  • Left
  • Right
  • 4.2L V8 4172CC
  • Cutting and Welding Required During Installation
Audi
V8 Quattro1993
  • Left
  • Right
  • 4.2L V8 4172CC
  • Cutting and Welding Required During Installation
Audi
V8 Quattro1994
  • Left
  • Right
  • 4.2L V8 4172CC
  • Cutting and Welding Required During Installation
Buick
Century1989
  • 3.3L V6 204CID
  • Cutting and Welding Required During Installation
Buick
Century1990
  • 3.3L V6 204CID
  • Cutting and Welding Required During Installation
Buick
Century1991
  • 3.3L V6 204CID
  • Cutting and Welding Required During Installation
Buick
Century1992
  • 3.3L V6 204CID
  • Cutting and Welding Required During Installation
Buick
Century1993
  • 3.3L V6 204CID
  • Cutting and Welding Required During Installation
Buick
Electra1980
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Buick
Electra1986
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick
Electra1987
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick
Electra1988
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick
Electra1989
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick
Electra1990
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick
LeSabre1980
  • Base
  • Limited
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Buick
LeSabre1986
  • 3.8L V6 3800CC/231CID
  • 3L V6 181CID
  • Cutting and Welding Required During Installation
Buick
LeSabre1987
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick
LeSabre1988
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick
LeSabre1989
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick
LeSabre1990
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick
LeSabre1991
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick
Reatta1988
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick
Reatta1989
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick
Reatta1990
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick
Regal1994
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick
Regal1995
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick
Riviera1986
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick
Riviera1987
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick
Riviera1988
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick
Riviera1989
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick
Riviera1990
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick
Skyhawk1987
  • 2L L4 122CID
  • Turbocharged
  • M
  • Cutting and Welding Required During Installation
Buick
Skylark1988
  • 2.3L L4 138CID
  • Cutting and Welding Required During Installation
Buick
Skylark1989
  • 3.3L V6 204CID
  • 2.3L L4 138CID
  • Cutting and Welding Required During Installation
Buick
Skylark1990
  • 3.3L V6 204CID
  • 2.3L L4 138CID
  • Cutting and Welding Required During Installation
Buick
Skylark1991
  • 3.3L V6 204CID
  • 2.3L L4 138CID
  • Cutting and Welding Required During Installation
Buick
Skylark1992
  • 3.3L V6 204CID
  • Cutting and Welding Required During Installation
Buick
Skylark1993
  • 3.3L V6 204CID
  • Cutting and Welding Required During Installation
Chevrolet
Camaro1985
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet
Camaro1986
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet
Camaro1987
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet
Camaro1988
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet
Camaro1989
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet
Caprice1981
  • 3.8L V6 229CID
  • 3.8L V6 3800CC/231CID
  • without Air Tube
  • Cutting and Welding Required During Installation
  • with Straight Outlet Pipe
Chevrolet
Caprice1982
  • 3.8L V6 229CID
  • 3.8L V6 3800CC/231CID
  • without Air Tube
  • Cutting and Welding Required During Installation
Chevrolet
Cavalier1987
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet
Cavalier1988
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet
Cavalier1989
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet
Cavalier1990
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Chevrolet
LLV1987
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Chevrolet
LLV1988
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Chevrolet
LLV1989
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Chevrolet
LLV1990
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Chevrolet
LLV1991
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Chevrolet
LLV1992
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Chevrolet
LLV1993
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Chevrolet
LLV1994
  • 2.2L L4 2190CC/134CID
  • Cutting and Welding Required During Installation
Chevrolet
LLV1995
  • 2.2L L4 2190CC/134CID
  • Cutting and Welding Required During Installation
Chevrolet
Lumina APV1990
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Chevrolet
Lumina APV1991
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Chevrolet
Lumina APV1993
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Chevrolet
Lumina APV1994
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Chevrolet
Lumina APV1995
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Chevrolet
S10 Blazer1983
  • 2L L4 122CID
  • 1.9L L4 119CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet
S10 Blazer1984
  • 2L L4 122CID
  • 1.9L L4 119CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet
S10 Blazer1985
  • 2.5L L4 2474CC/151CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet
S10 Blazer1986
  • 2.5L L4 2474CC/151CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet
S10 Blazer1987
  • 2.5L L4 2474CC/151CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet
S10 Blazer1988
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Chevrolet
S101982
  • 1.9L L4 119CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet
S101983
  • 2L L4 122CID
  • 1.9L L4 119CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet
S101984
  • 2L L4 122CID
  • 1.9L L4 119CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet
S101985
  • 2.5L L4 2474CC/151CID
  • 1.9L L4 119CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet
S101986
  • 2.5L L4 2474CC/151CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet
S101987
  • 2.5L L4 2474CC/151CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet
S101988
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Chevrolet
S101989
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Chevrolet
S101990
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Chevrolet
S101991
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Chevrolet
S101992
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Chevrolet
S101993
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Chevrolet
Sprint1991
  • 1L L3 993CC/61cCID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
  • CAN
Chrysler
Cirrus1995
  • 2.4L L4 2429CC/148CID
  • 2.5L V6 2497CC/152CID
  • Cutting and Welding Required During Installation
Chrysler
Cordoba1979
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Chrysler
Daytona1984
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
  • CAN
Chrysler
Daytona1985
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
  • CAN
Chrysler
Daytona1986
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
  • CAN
Chrysler
Daytona1992
  • Rear
  • 2.5L L4 2507CC/153CID
  • Naturally Aspirated
  • without Air Tube
  • CAN
  • Cutting and Welding Required During Installation
Chrysler
Daytona1993
  • Rear
  • 2.5L L4 2507CC/153CID
  • without Air Tube
  • CAN
  • Cutting and Welding Required During Installation
Chrysler
E Class1984
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Chrysler
Imperial1992
  • 3.8L V6 3778CC/231CID
  • Cutting and Welding Required During Installation
Chrysler
Imperial1993
  • 3.8L V6 3778CC/231CID
  • Cutting and Welding Required During Installation
Chrysler
Laser1984
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Chrysler
Laser1985
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Chrysler
Laser1986
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Chrysler
LeBaron1984
  • 2.2L L4 135CID
  • E
  • Cutting and Welding Required During Installation
Chrysler
LeBaron1985
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Chrysler
LeBaron1992
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Chrysler
LeBaron1993
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Chrysler
LeBaron1994
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Chrysler
LeBaron1995
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Chrysler
Newport1979
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Chrysler
Newport1980
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Chrysler
Newport1981
  • 5.2L V8 5211CC/318CID
  • without Air Tube
  • Cutting and Welding Required During Installation
Chrysler
New Yorker1979
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Chrysler
New Yorker1980
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Chrysler
New Yorker1984
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Chrysler
New Yorker1985
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Chrysler
New Yorker1986
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Chrysler
New Yorker1987
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Chrysler
New Yorker1988
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Chrysler
New Yorker1991
  • 3.8L V6 3778CC/231CID
  • Cutting and Welding Required During Installation
Chrysler
New Yorker1992
  • 3.3L V6 3301CC/201CID
  • 3.8L V6 3778CC/231CID
  • Cutting and Welding Required During Installation
Chrysler
New Yorker1993
  • 3.3L V6 3301CC/201CID
  • 3.8L V6 3778CC/231CID
  • Cutting and Welding Required During Installation
Chrysler
Town & Country1990
  • 3.3L V6 3301CC/201CID
  • Cutting and Welding Required During Installation
Chrysler
Town & Country1991
  • 3.3L V6 3301CC/201CID
  • Cutting and Welding Required During Installation
Chrysler
Town & Country1992
  • FWD
  • 3.3L V6 3301CC/201CID
  • Cutting and Welding Required During Installation
Chrysler
Town & Country1993
  • FWD
  • 3.3L V6 3301CC/201CID
  • Cutting and Welding Required During Installation
Chrysler
Town & Country1994
  • FWD
  • 3.8L V6 3778CC/231CID
  • Cutting and Welding Required During Installation
Chrysler
Town & Country1995
  • FWD
  • 3.8L V6 3778CC/231CID
  • Cutting and Welding Required During Installation
Dodge
Avenger1995
  • 2.5L V6 2497CC/152CID
  • Cutting and Welding Required During Installation
Dodge
Caravan1987
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge
Caravan1988
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge
Caravan1989
  • 2.5L L4 2507CC/153CID
  • 3L V6 2972CC/181CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge
Caravan1990
  • 3.3L V6 3301CC/201CID
  • 2.5L L4 2507CC/153CID
  • 3L V6 2972CC/181CID
  • Turbocharged
  • Cutting and Welding Required During Installation
  • CAN
Dodge
Caravan1991
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge
Caravan1992
  • 3.3L V6 3301CC/201CID
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge
Caravan1993
  • 3.3L V6 3301CC/201CID
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge
Caravan1994
  • FWD
  • 3.3L V6 3301CC/201CID
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge
Caravan1995
  • 3.3L V6 3301CC/201CID
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge
Charger1977
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge
Charger1985
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge
Charger1986
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge
Charger1987
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge
D1001984
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Dodge
Daytona1984
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge
Daytona1985
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge
Daytona1986
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge
Daytona1992
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge
Daytona1993
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge
Dynasty1992
  • 3.3L V6 3301CC/201CID
  • Cutting and Welding Required During Installation
Dodge
Dynasty1993
  • 3.3L V6 3301CC/201CID
  • Cutting and Welding Required During Installation
Dodge
Grand Caravan1988
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge
Grand Caravan1989
  • 3L V6 2972CC/181CID
  • 2.5L L4 2507CC/153CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge
Grand Caravan1990
  • 3.3L V6 3301CC/201CID
  • Cutting and Welding Required During Installation
Dodge
Grand Caravan1991
  • FWD
  • 3.3L V6 3301CC/201CID
  • Cutting and Welding Required During Installation
Dodge
Grand Caravan1992
  • FWD
  • 3.3L V6 3301CC/201CID
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge
Grand Caravan1993
  • FWD
  • 3.3L V6 3301CC/201CID
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge
Grand Caravan1994
  • FWD
  • 3.3L V6 3301CC/201CID
  • 3.8L V6 3778CC/231CID
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge
Grand Caravan1995
  • FWD
  • 3.3L V6 3301CC/201CID
  • 3.8L V6 3778CC/231CID
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge
Lancer1985
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge
Lancer1986
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge
Lancer1987
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge
Lancer1988
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge
Lancer1989
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge
Mini Ram1987
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge
Mini Ram1988
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge
Monaco1990
  • 3L V6 2972CC/182CID
  • Cutting and Welding Required During Installation
Dodge
Monaco1991
  • 3L V6 2972CC/182CID
  • Cutting and Welding Required During Installation
Dodge
Monaco1992
  • 3L V6 2972CC/182CID
  • Cutting and Welding Required During Installation
Dodge
Shadow1987
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge
Shadow1989
  • 2.5L L4 2507CC/153CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge
Shadow1990
  • 2.5L L4 2507CC/153CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge
Shadow1991
  • 2.5L L4 2507CC/153CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge
Shadow1992
  • 2.5L L4 2507CC/153CID
  • 3L V6 2972CC/181CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge
Shadow1993
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge
Shadow1994
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge
Spirit1992
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge
Spirit1993
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge
Spirit1994
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge
Spirit1995
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge
St. Regis1981
  • 5.2L V8 5211CC/318CID
  • without Air Tube
  • Cutting and Welding Required During Installation
Dodge
Stealth1991
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge
Stealth1992
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge
Stealth1993
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge
Stealth1994
  • Rear
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge
Stealth1995
  • Rear
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge
Stealth1996
  • Rear
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge
Stratus1995
  • 2.4L L4 2429CC/148CID
  • 2L L4 1996CC/122CID
  • 2.5L V6 2497CC/152CID
  • Cutting and Welding Required During Installation
Eagle
Medallion1988
  • 2.2L L4 2163CC/132CID
  • Cutting and Welding Required During Installation
Eagle
Medallion1989
  • 2.2L L4 2163CC/132CID
  • Cutting and Welding Required During Installation
Eagle
Premier1988
  • 2.5L L4 150CID
  • 3L V6 2972CC/182CID
  • Cutting and Welding Required During Installation
Eagle
Premier1989
  • 2.5L L4 150CID
  • 3L V6 2972CC/182CID
  • Cutting and Welding Required During Installation
Eagle
Premier1990
  • 3L V6 2972CC/182CID
  • Cutting and Welding Required During Installation
Eagle
Premier1991
  • 3L V6 2972CC/182CID
  • Cutting and Welding Required During Installation
Eagle
Premier1992
  • 3L V6 2972CC/182CID
  • Cutting and Welding Required During Installation
Ford
Aerostar1986
  • Front
  • Rear
  • 2.8L V6 171CID
  • Cutting and Welding Required During Installation
Ford
Aerostar1990
  • Front
  • Rear
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford
Aerostar1991
  • Front
  • Rear
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford
Aerostar1992
  • Front
  • Rear
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford
Aerostar1993
  • Front
  • Rear
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford
Aerostar1994
  • Front
  • Rear
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford
Aerostar1995
  • Front
  • Rear
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford
E-100 Econoline1977
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford
E-100 Econoline1978
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford
E-100 Econoline1983
  • 4.9L L6 4917CC/300CID
  • without Air Tube
  • Cutting and Welding Required During Installation
Ford
E-100 Econoline Club Wagon1983
  • 4.9L L6 4917CC/300CID
  • without Air Tube
  • Cutting and Welding Required During Installation
Ford
F-1001980
  • 5L V8 302CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford
F-1001981
  • 5L V8 302CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford
F-1001982
  • 5L V8 302CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford
F-1001983
  • 5L V8 302CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford
F-1501980
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford
F-1501981
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford
F-1501982
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford
F-1501983
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford
F-2501980
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford
F-2501981
  • 5L V8 302CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford
F-2501982
  • 5L V8 302CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford
F-2501983
  • 5L V8 302CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford
Mustang1981
  • Rear
  • 2.3L L4 140CID
  • without Air Tube
  • USA
  • Cutting and Welding Required During Installation
  • CAN
Ford
Mustang1982
  • Rear
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
  • USA
  • CAN
Ford
Probe1993
  • 2.5L V6 2497CC
  • 2L L4 1989CC/122CID
  • Cutting and Welding Required During Installation
Ford
Probe1994
  • 2.5L V6 2497CC
  • 2L L4 1989CC/122CID
  • Cutting and Welding Required During Installation
Ford
Probe1995
  • 2.5L V6 2497CC
  • 2L L4 1989CC/122CID
  • Cutting and Welding Required During Installation
Ford
Ranger1985
  • 2L L4 1989CC/122CID
  • 2.3L L4 140CID
  • without Air Tube
  • Cutting and Welding Required During Installation
Ford
Ranger1986
  • Standard
  • Automatic
  • 2L L4 1989CC/122CID
  • 2.3L L4 140CID
  • without Air Tube
  • Cutting and Welding Required During Installation
  • Split Date From: From 02/1986
  • Split Date To: To 12/1985
Ford
Ranger1995
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Ford
Taurus1989
  • Rear
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Ford
Taurus1990
  • Rear
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Geo
Metro1989
  • Standard
  • 1L L3 993CC/61cCID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Geo
Metro1990
  • Standard
  • 1L L3 993CC/61cCID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Geo
Metro1991
  • Standard
  • 1L L3 993CC/61cCID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Geo
Metro1992
  • Standard
  • 1L L3 993CC/61cCID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Geo
Metro1993
  • Standard
  • 1L L3 993CC/61cCID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Geo
Metro1994
  • Standard
  • 1L L3 993CC/61cCID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
GMC
S15 Jimmy1983
  • 2L L4 122CID
  • 1.9L L4 119CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
GMC
S15 Jimmy1984
  • 2L L4 122CID
  • 1.9L L4 119CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
GMC
S15 Jimmy1985
  • 2.5L L4 2474CC/151CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
GMC
S15 Jimmy1986
  • 2.5L L4 2474CC/151CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
GMC
S15 Jimmy1987
  • 2.5L L4 2474CC/151CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
GMC
S15 Jimmy1988
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
GMC
S151982
  • 1.9L L4 119CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
GMC
S151983
  • 2L L4 122CID
  • 1.9L L4 119CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
GMC
S151984
  • 2L L4 122CID
  • 1.9L L4 119CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
GMC
S151985
  • 2.5L L4 2474CC/151CID
  • 1.9L L4 119CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
GMC
S151986
  • 2.5L L4 2474CC/151CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
GMC
S151987
  • 2.5L L4 2474CC/151CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
GMC
S151988
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
GMC
S151989
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
GMC
S151990
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
GMC
Sonoma1991
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
GMC
Sonoma1992
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
GMC
Sonoma1993
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Honda
Passport1994
  • Rear
  • 2.6L L4 2559CC
  • Cutting and Welding Required During Installation
Honda
Passport1995
  • Rear
  • 2.6L L4 2559CC
  • Cutting and Welding Required During Installation
Jeep
Cherokee1986
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep
Cherokee1987
  • 4L L6 242CID
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep
Cherokee1988
  • 4L L6 242CID
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep
Cherokee1989
  • 4L L6 242CID
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep
Cherokee1990
  • 4L L6 242CID
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep
Cherokee1991
  • 4L L6 242CID
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep
Cherokee1992
  • 4L L6 242CID
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep
Cherokee1993
  • 4L L6 242CID
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep
Cherokee1994
  • 4L L6 242CID
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep
Cherokee1995
  • 4L L6 242CID
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep
CJ61975
  • 3.8L L6 232CID
  • 4.2L L6 258CID
  • 5L V8 304CID
  • Cutting and Welding Required During Installation
Jeep
CJ71976
  • 5L V8 304CID
  • Cutting and Welding Required During Installation
Jeep
CJ71977
  • 5L V8 304CID
  • Cutting and Welding Required During Installation
Jeep
Comanche1986
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep
Comanche1987
  • 4L L6 242CID
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep
Comanche1988
  • 4L L6 242CID
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep
Comanche1989
  • 4L L6 242CID
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep
Comanche1990
  • 4L L6 242CID
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep
Comanche1991
  • 4L L6 242CID
  • Cutting and Welding Required During Installation
Jeep
Comanche1992
  • 4L L6 242CID
  • Cutting and Welding Required During Installation
Jeep
J101978
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Jeep
J201978
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Jeep
Wagoneer1986
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep
Wagoneer1987
  • 4L L6 242CID
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep
Wagoneer1988
  • 4L L6 242CID
  • Cutting and Welding Required During Installation
Jeep
Wagoneer1989
  • 4L L6 242CID
  • Cutting and Welding Required During Installation
Jeep
Wagoneer1990
  • 4L L6 242CID
  • Cutting and Welding Required During Installation
Jeep
Wrangler1987
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep
Wrangler1988
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep
Wrangler1989
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep
Wrangler1990
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep
Wrangler1992
  • 4L L6 242CID
  • Cutting and Welding Required During Installation
Jeep
Wrangler1993
  • 4L L6 242CID
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep
Wrangler1994
  • 4L L6 242CID
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep
Wrangler1995
  • 4L L6 242CID
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Lexus
ES3001995
  • 3L V6 2995CC
  • Cutting and Welding Required During Installation
Lexus
GS3001993
  • Rear
  • 3L L6 2997CC
  • Cutting and Welding Required During Installation
Lexus
GS3001994
  • Rear
  • 3L L6 2997CC
  • Cutting and Welding Required During Installation
Lexus
GS3001995
  • Rear
  • 3L L6 2997CC
  • Cutting and Welding Required During Installation
Lexus
LS4001990
  • Front Right
  • Front Left
  • 4L V8 3969CC
  • Cutting and Welding Required During Installation
Lexus
LS4001991
  • Front Right
  • Front Left
  • Rear
  • 4L V8 3969CC
  • Cutting and Welding Required During Installation
Lexus
LS4001992
  • Front Right
  • Front Left
  • Rear
  • 4L V8 3969CC
  • Cutting and Welding Required During Installation
Lexus
LS4001993
  • Front Right
  • Front Left
  • Rear
  • 4L V8 3969CC
  • Cutting and Welding Required During Installation
Lexus
LS4001994
  • Front Right
  • Front Left
  • Rear
  • 4L V8 3969CC
  • Cutting and Welding Required During Installation
Lexus
LS4001995
  • Rear
  • 4L V8 3969CC
  • Cutting and Welding Required During Installation
Lexus
SC3001992
  • Rear
  • 3L L6 2997CC
  • Cutting and Welding Required During Installation
Lexus
SC3001993
  • Rear
  • 3L L6 2997CC
  • Cutting and Welding Required During Installation
Lexus
SC3001994
  • Rear
  • 3L L6 2997CC
  • Cutting and Welding Required During Installation
Lexus
SC3001995
  • Rear
  • 3L L6 2997CC
  • Cutting and Welding Required During Installation
Lexus
SC4001992
  • Rear
  • 4L V8 3969CC
  • Cutting and Welding Required During Installation
Lexus
SC4001993
  • Rear
  • 4L V8 3969CC
  • Cutting and Welding Required During Installation
Lexus
SC4001994
  • Rear
  • 4L V8 3969CC
  • Cutting and Welding Required During Installation
Lexus
SC4001995
  • Rear
  • 4L V8 3969CC
  • Cutting and Welding Required During Installation
Lincoln
Continental1988
  • Rear
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Lincoln
Continental1989
  • Rear
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Lincoln
Continental1990
  • Rear
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Mazda
6261993
  • Standard
  • 2.5L V6 2497CC
  • 2L L4 1991CC
  • Cutting and Welding Required During Installation
  • Federal Emissions Equipped
Mazda
6261994
  • Rear
  • Standard
  • 2.5L V6 2497CC
  • 2L L4 1991CC
  • Cutting and Welding Required During Installation
  • Federal Emissions Equipped
Mazda
6261995
  • 2.5L V6 2497CC
  • 2L L4 1991CC
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
  • California Emissions Equipped Vehicles Registered Outside Of California
Mazda
B22001990
  • 2.2L L4 2184CC
  • FI
  • Cutting and Welding Required During Installation
Mazda
B22001991
  • 2.2L L4 2184CC
  • FI
  • Cutting and Welding Required During Installation
Mazda
B22001992
  • 2.2L L4 2184CC
  • FI
  • Cutting and Welding Required During Installation
Mazda
B22001993
  • 2.2L L4 2184CC
  • FI
  • Cutting and Welding Required During Installation
Mazda
B26001991
  • 2.6L L4 2606CC
  • Cutting and Welding Required During Installation
Mazda
B26001992
  • 2.6L L4 2606CC
  • Cutting and Welding Required During Installation
Mazda
B26001993
  • 2.6L L4 2606CC
  • Cutting and Welding Required During Installation
Mazda
Miata1994
  • 1.8L L4 1839CC
  • Cutting and Welding Required During Installation
Mazda
Miata1995
  • 1.8L L4 1839CC
  • Cutting and Welding Required During Installation
Mazda
MPV1989
  • 3L V6 2954CC/180CID
  • 2.6L L4 2606CC
  • Cutting and Welding Required During Installation
Mazda
MPV1990
  • 3L V6 2954CC/180CID
  • 2.6L L4 2606CC
  • Cutting and Welding Required During Installation
Mazda
MPV1991
  • 2.6L L4 2606CC
  • 3L V6 2954CC/180CID
  • Cutting and Welding Required During Installation
Mazda
MPV1992
  • 2.6L L4 2606CC
  • 3L V6 2954CC/180CID
  • Cutting and Welding Required During Installation
Mazda
MPV1993
  • 3L V6 2954CC/180CID
  • 2.6L L4 2606CC
  • Cutting and Welding Required During Installation
Mazda
MPV1994
  • 2.6L L4 2606CC
  • Cutting and Welding Required During Installation
Mazda
MX-61993
  • Standard
  • 2.5L V6 2497CC
  • 2L L4 1991CC
  • Cutting and Welding Required During Installation
  • Federal Emissions Equipped
Mazda
MX-61994
  • Standard
  • 2.5L V6 2497CC
  • 2L L4 1991CC
  • Cutting and Welding Required During Installation
  • Federal Emissions Equipped
Mazda
MX-61995
  • 2.5L V6 2497CC
  • 2L L4 1991CC
  • Cutting and Welding Required During Installation
  • Federal Emissions Equipped
Mercury
Capri1982
  • Rear
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
  • CAN
Mercury
Sable1989
  • Rear
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Mercury
Sable1990
  • Rear
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Merkur
XR4Ti1985
  • 2.3L L4 140CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Merkur
XR4Ti1986
  • 2.3L L4 140CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Merkur
XR4Ti1987
  • 2.3L L4 140CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Merkur
XR4Ti1988
  • 2.3L L4 140CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Merkur
XR4Ti1989
  • 2.3L L4 140CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Mitsubishi
3000GT1991
  • Right
  • 3L V6 2972CC/181CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Mitsubishi
3000GT1992
  • Right
  • 3L V6 2972CC/181CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Mitsubishi
3000GT1993
  • Right
  • 3L V6 2972CC/181CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Mitsubishi
3000GT1994
  • Rear
  • Right
  • 3L V6 2972CC/181CID
  • Naturally Aspirated
  • Turbocharged
  • Cutting and Welding Required During Installation
Mitsubishi
3000GT1995
  • Rear
  • Right
  • 3L V6 2972CC/181CID
  • Naturally Aspirated
  • Turbocharged
  • Cutting and Welding Required During Installation
Mitsubishi
Diamante1993
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Mitsubishi
Diamante1994
  • Rear
  • Wagon
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Mitsubishi
Diamante1995
  • Rear
  • Wagon
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Mitsubishi
Expo1992
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Mitsubishi
Expo1993
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Mitsubishi
Expo1994
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Mitsubishi
Expo LRV1992
  • 1.8L L4 1834CC/112CID
  • Cutting and Welding Required During Installation
Mitsubishi
Expo LRV1993
  • 2.4L L4 2351CC
  • 1.8L L4 1834CC/112CID
  • Cutting and Welding Required During Installation
Mitsubishi
Expo LRV1994
  • 2.4L L4 2351CC
  • 1.8L L4 1834CC/112CID
  • Cutting and Welding Required During Installation
Mitsubishi
Galant1994
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Nissan
7201981
  • 2.2L L4 2164CC
  • Cutting and Welding Required During Installation
Nissan
7201982
  • 2.2L L4 2164CC
  • Cutting and Welding Required During Installation
Nissan
7201983
  • 2.2L L4 2164CC
  • Cutting and Welding Required During Installation
Nissan
Stanza1990
  • 2.4L L4 2389CC
  • Cutting and Welding Required During Installation
Nissan
Stanza1991
  • 2.4L L4 2389CC
  • Cutting and Welding Required During Installation
Nissan
Stanza1992
  • 2.4L L4 2389CC
  • Cutting and Welding Required During Installation
Oldsmobile
981980
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Oldsmobile
981986
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Oldsmobile
981987
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Oldsmobile
981988
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Oldsmobile
981989
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Oldsmobile
981990
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Oldsmobile
Achieva1992
  • 3.3L V6 204CID
  • Cutting and Welding Required During Installation
Oldsmobile
Achieva1993
  • 3.3L V6 204CID
  • Cutting and Welding Required During Installation
Oldsmobile
Calais1987
  • 2.3L L4 138CID
  • Cutting and Welding Required During Installation
Oldsmobile
Custom Cruiser1980
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Oldsmobile
Cutlass Calais1988
  • 2.3L L4 138CID
  • Cutting and Welding Required During Installation
Oldsmobile
Cutlass Calais1989
  • 2.3L L4 138CID
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Oldsmobile
Cutlass Calais1990
  • 3.3L V6 204CID
  • 2.3L L4 138CID
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Oldsmobile
Cutlass Calais1991
  • 3.3L V6 204CID
  • 2.3L L4 138CID
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Oldsmobile
Cutlass Ciera1989
  • 3.3L V6 204CID
  • Cutting and Welding Required During Installation
Oldsmobile
Cutlass Ciera1990
  • 3.3L V6 204CID
  • 3.3L V6 3340CC/204CID
  • Cutting and Welding Required During Installation
Oldsmobile
Cutlass Ciera1991
  • 3.3L V6 204CID
  • Cutting and Welding Required During Installation
Oldsmobile
Cutlass Ciera1992
  • 3.3L V6 204CID
  • Cutting and Welding Required During Installation
Oldsmobile
Cutlass Ciera1993
  • 3.3L V6 204CID
  • Cutting and Welding Required During Installation
Oldsmobile
Cutlass Cruiser1989
  • 3.3L V6 204CID
  • Cutting and Welding Required During Installation
Oldsmobile
Cutlass Cruiser1990
  • 3.3L V6 204CID
  • Cutting and Welding Required During Installation
Oldsmobile
Cutlass Cruiser1991
  • 3.3L V6 204CID
  • Cutting and Welding Required During Installation
Oldsmobile
Cutlass Cruiser1992
  • 3.3L V6 204CID
  • Cutting and Welding Required During Installation
Oldsmobile
Cutlass Cruiser1993
  • 3.3L V6 204CID
  • Cutting and Welding Required During Installation
Oldsmobile
Cutlass Supreme1990
  • 2.3L L4 138CID
  • Cutting and Welding Required During Installation
Oldsmobile
Cutlass Supreme1991
  • Base
  • 3.1L V6 189CID
  • with Single Exhaust
  • Cutting and Welding Required During Installation
Oldsmobile
Cutlass Supreme1992
  • Base
  • 3.1L V6 189CID
  • with Single Exhaust
  • Cutting and Welding Required During Installation
Oldsmobile
Cutlass Supreme1994
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Oldsmobile
Cutlass Supreme1995
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Oldsmobile
Delta 881980
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Oldsmobile
Delta 881986
  • 3.8L V6 3800CC/231CID
  • 3L V6 181CID
  • Cutting and Welding Required During Installation
Oldsmobile
Delta 881987
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Oldsmobile
Delta 881988
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Oldsmobile
Delta 881989
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Oldsmobile
Delta 881990
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Oldsmobile
Delta 881991
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Oldsmobile
Silhouette1990
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Oldsmobile
Silhouette1991
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Oldsmobile
Silhouette1993
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Oldsmobile
Silhouette1994
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Oldsmobile
Silhouette1995
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Oldsmobile
Starfire1975
  • 3.8L V6 231CID
  • Cutting and Welding Required During Installation
Oldsmobile
Starfire1979
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Oldsmobile
Toronado1980
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Oldsmobile
Toronado1986
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Oldsmobile
Toronado1987
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Oldsmobile
Toronado1988
  • 3.8L V6 3800CC/231CID
  • without Air Tube
  • Cutting and Welding Required During Installation
Plymouth
Acclaim1992
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Plymouth
Acclaim1993
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Plymouth
Acclaim1994
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Plymouth
Acclaim1995
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Plymouth
Caravelle1985
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Plymouth
Caravelle1986
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Plymouth
Caravelle1987
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Plymouth
Caravelle1988
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Plymouth
Duster1975
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Plymouth
Fury1977
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Plymouth
Fury1978
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Plymouth
Grand Voyager1988
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Plymouth
Grand Voyager1989
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Plymouth
Grand Voyager1990
  • 3.3L V6 3301CC/201CID
  • Cutting and Welding Required During Installation
Plymouth
Grand Voyager1992
  • FWD
  • 3.3L V6 3301CC/201CID
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Plymouth
Grand Voyager1993
  • FWD
  • 3.3L V6 3301CC/201CID
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Plymouth
Grand Voyager1994
  • FWD
  • 3.3L V6 3301CC/201CID
  • 3.8L V6 3778CC/231CID
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Plymouth
Grand Voyager1995
  • FWD
  • 3.3L V6 3301CC/201CID
  • 3.8L V6 3778CC/231CID
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Plymouth
PB1001980
  • 3.7L L6 3687CC/225CID
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
  • without Air Tube
Plymouth
PB1501981
  • 3.7L L6 3687CC/225CID
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
  • without Air Tube
Plymouth
Scamp1975
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Plymouth
Scamp1976
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Plymouth
Sundance1987
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Plymouth
Sundance1989
  • 2.5L L4 2507CC/153CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Plymouth
Sundance1990
  • 2.5L L4 2507CC/153CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Plymouth
Sundance1991
  • 2.5L L4 2507CC/153CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Plymouth
Sundance1992
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Plymouth
Sundance1993
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Plymouth
Sundance1994
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Plymouth
Voyager1987
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Plymouth
Voyager1988
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Plymouth
Voyager1989
  • 2.5L L4 2507CC/153CID
  • 3L V6 2972CC/181CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Plymouth
Voyager1990
  • 2.5L L4 2507CC/153CID
  • 3L V6 2972CC/181CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Plymouth
Voyager1991
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Plymouth
Voyager1992
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Plymouth
Voyager1993
  • FWD
  • 3.3L V6 3301CC/201CID
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Plymouth
Voyager1994
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Plymouth
Voyager1995
  • 3.3L V6 3301CC/201CID
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Pontiac
Bonneville1987
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Pontiac
Bonneville1988
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Pontiac
Bonneville1989
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Pontiac
Bonneville1990
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Pontiac
Bonneville1991
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Pontiac
Catalina1981
  • 3.8L V6 3800CC/231CID
  • without Air Tube
  • Cutting and Welding Required During Installation
Pontiac
Firebird1978
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Pontiac
Firebird1985
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Pontiac
Firebird1986
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Pontiac
Firebird1987
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Pontiac
Firebird1988
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Pontiac
Firebird1989
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Pontiac
Grand Am1988
  • 2.3L L4 138CID
  • Cutting and Welding Required During Installation
Pontiac
Grand Am1989
  • 2.3L L4 138CID
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Pontiac
Grand Am1990
  • 2.3L L4 138CID
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Pontiac
Grand Am1991
  • 2.3L L4 138CID
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Pontiac
Grand Am1992
  • 3.3L V6 204CID
  • Cutting and Welding Required During Installation
Pontiac
Grand Am1993
  • 3.3L V6 204CID
  • Cutting and Welding Required During Installation
Pontiac
Grand Prix1990
  • 3.1L V6 189CID
  • 2.3L L4 138CID
  • Dual Exhaust
  • Cutting and Welding Required During Installation
Pontiac
Grand Prix1991
  • 3.1L V6 189CID
  • 2.3L L4 138CID
  • Dual Exhaust
  • Cutting and Welding Required During Installation
Pontiac
Grand Prix1992
  • 3.1L V6 189CID
  • Dual Exhaust
  • Cutting and Welding Required During Installation
Pontiac
Grand Prix1993
  • 3.1L V6 189CID
  • Dual Exhaust
  • Cutting and Welding Required During Installation
Pontiac
Grand Prix1994
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
  • Dual Exhaust
Pontiac
Grand Prix1995
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
  • Dual Exhaust
Pontiac
Laurentian1981
  • 3.8L V6 231CID
  • without Air Tube
  • CAN
  • Cutting and Welding Required During Installation
Pontiac
Sunbird1987
  • 2L L4 122CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Pontiac
Sunbird1988
  • 2L L4 122CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Pontiac
Sunbird1989
  • 2L L4 122CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Pontiac
Sunbird1990
  • 2L L4 122CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Pontiac
Trans Sport1991
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Pontiac
Trans Sport1993
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Pontiac
Trans Sport1994
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Pontiac
Trans Sport1995
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Porsche
9111978
  • 3L H6 2999CC
  • Cutting and Welding Required During Installation
Porsche
9111980
  • 3L H6 2999CC
  • Cutting and Welding Required During Installation
Porsche
9111981
  • 3L H6 2999CC
  • 3.3L H6 3294CC
  • Cutting and Welding Required During Installation
  • CAN
Porsche
9111982
  • 3L H6 2999CC
  • 3.3L H6 3294CC
  • Cutting and Welding Required During Installation
  • CAN
Porsche
9111983
  • 3L H6 2999CC
  • 3.3L H6 3294CC
  • Cutting and Welding Required During Installation
  • CAN
Porsche
9111984
  • 3.3L H6 3294CC
  • 3.2L H6 3163CC
  • Cutting and Welding Required During Installation
  • CAN
  • without Air Tube
  • USA
Porsche
9111985
  • 3.3L H6 3294CC
  • 3.2L H6 3163CC
  • Cutting and Welding Required During Installation
  • CAN
  • without Air Tube
  • USA
Porsche
9111986
  • 3.2L H6 3163CC
  • 3.3L H6 3294CC
  • Cutting and Welding Required During Installation
Porsche
9111987
  • 3.2L H6 3163CC
  • 3.3L H6 3294CC
  • Cutting and Welding Required During Installation
Porsche
9111988
  • 3.2L H6 3163CC
  • 3.3L H6 3294CC
  • Cutting and Welding Required During Installation
Porsche
9111989
  • 3.2L H6 3163CC
  • 3.3L H6 3294CC
  • Cutting and Welding Required During Installation
Porsche
9111990
  • 3.6L H6 3606CC
  • Cutting and Welding Required During Installation
Porsche
9111991
  • 3.6L H6 3606CC
  • 3.3L H6 3294CC
  • Cutting and Welding Required During Installation
Porsche
9111992
  • 3.6L H6 3606CC
  • 3.3L H6 3294CC
  • Cutting and Welding Required During Installation
Porsche
9111993
  • 3.6L H6 3606CC
  • Cutting and Welding Required During Installation
Porsche
9111994
  • 3.6L H6 3606CC
  • Cutting and Welding Required During Installation
Porsche
9111995
  • 3.6L H6 3606CC
  • Cutting and Welding Required During Installation
Porsche
9241980
  • 2L L4 1983CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Porsche
9241981
  • 2L L4 1983CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Porsche
9241982
  • 2L L4 1983CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Porsche
9441989
  • 3L L4 2999CC
  • Cutting and Welding Required During Installation
Porsche
9441990
  • 3L L4 2983CC
  • Cutting and Welding Required During Installation
  • USA
  • CAN
Porsche
9441991
  • 3L L4 2983CC
  • Cutting and Welding Required During Installation
Renault
Fuego1982
  • 1.6L L4 1565CC/96cCID
  • Turbocharged
  • Cutting and Welding Required During Installation
Renault
Fuego1983
  • 1.6L L4 1565CC/96cCID
  • Turbocharged
  • Cutting and Welding Required During Installation
Renault
Fuego1984
  • 1.6L L4 1565CC/96cCID
  • Cutting and Welding Required During Installation
Saab
90001986
  • 2L L4 1985CC
  • Cutting and Welding Required During Installation
Saab
90001987
  • 2L L4 1985CC
  • Cutting and Welding Required During Installation
Saab
90001988
  • 2L L4 1985CC
  • Cutting and Welding Required During Installation
Saab
90001989
  • 2L L4 1985CC
  • Cutting and Welding Required During Installation
  • USA
Saab
90001990
  • 2L L4 1985CC
  • 2.3L L4 2290CC/140CID
  • Cutting and Welding Required During Installation
  • USA
Saab
90001991
  • 2.3L L4 2290CC
  • 2.3L L4 2290CC/140CID
  • Cutting and Welding Required During Installation
Saab
90001992
  • 2.3L L4 2290CC
  • 2.3L L4 2290CC/140CID
  • Cutting and Welding Required During Installation
Saab
90001993
  • 2.3L L4 2290CC/140CID
  • 2.3L L4 2290CC
  • Naturally Aspirated
  • Turbocharged
  • Cutting and Welding Required During Installation
Saab
90001994
  • 2.3L L4 2290CC
  • 2.3L L4 2290CC/140CID
  • Turbocharged
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Saab
90001995
  • 3L V6 2961CC/181CID
  • Cutting and Welding Required During Installation
Saturn
SC1991
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn
SC1992
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn
SC11993
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn
SC11994
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn
SC11995
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn
SL1991
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn
SL1992
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn
SL1993
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn
SL1994
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn
SL1995
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn
SL11991
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn
SL11992
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn
SL11993
  • 1.9L L4 116CID
  • SOHC
  • Cutting and Welding Required During Installation
Saturn
SL11994
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn
SL11995
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn
SL21991
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn
SL21992
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn
SW11993
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn
SW11994
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn
SW11995
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Suzuki
Sidekick1993
  • 1.6L L4 1590CC/97cCID
  • 4
  • Cutting and Welding Required During Installation
Suzuki
Sidekick1994
  • 1.6L L4 1590CC/97cCID
  • Cutting and Welding Required During Installation
Suzuki
Sidekick1995
  • 1.6L L4 1590CC/97cCID
  • Cutting and Welding Required During Installation
Toyota
Avalon1995
  • 3L V6 2995CC
  • Cutting and Welding Required During Installation
Toyota
Camry1988
  • 2.5L V6 2508CC
  • without Air Tube
  • Cutting and Welding Required During Installation
Toyota
Camry1989
  • 2.5L V6 2508CC
  • without Air Tube
  • Cutting and Welding Required During Installation
Toyota
Camry1990
  • 2.5L V6 2508CC
  • without Air Tube
  • Cutting and Welding Required During Installation
Toyota
Camry1991
  • 2.5L V6 2508CC
  • without Air Tube
  • Cutting and Welding Required During Installation
Toyota
Camry1995
  • 3L V6 2995CC
  • Cutting and Welding Required During Installation
Toyota
Celica1990
  • Rear
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Toyota
Celica1991
  • Rear
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Toyota
Celica1992
  • Rear
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Toyota
Celica1993
  • Rear
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Toyota
Cressida1981
  • Rear
  • 2.8L L6 2759CC
  • Cutting and Welding Required During Installation
Toyota
Cressida1982
  • Rear
  • 2.8L L6 2759CC
  • Cutting and Welding Required During Installation
Toyota
Previa1991
  • 2.4L L4 2438CC
  • Cutting and Welding Required During Installation
Toyota
Previa1992
  • 2.4L L4 2438CC
  • Cutting and Welding Required During Installation
Toyota
Previa1993
  • 2.4L L4 2438CC
  • Cutting and Welding Required During Installation
Toyota
Previa1994
  • 2.4L L4 2438CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Toyota
Previa1995
  • 2.4L L4 2438CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Toyota
Supra1987
  • Rear
  • 3L L6 2954CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Toyota
Supra1988
  • Rear
  • 3L L6 2954CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Toyota
Supra1989
  • Rear
  • 3L L6 2954CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Toyota
Supra1990
  • Rear
  • 3L L6 2954CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Toyota
Supra1991
  • Rear
  • 3L L6 2954CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Toyota
Supra1992
  • Rear
  • 3L L6 2954CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Toyota
Van1988
  • RWD
  • 2.2L L4 2237CC
  • Cutting and Welding Required During Installation
Toyota
Van1989
  • RWD
  • 2.2L L4 2237CC
  • Cutting and Welding Required During Installation
Volvo
7801989
  • 2.3L L4 2316CC
  • Cutting and Welding Required During Installation
Volvo
7801990
  • 2.3L L4 2316CC
  • Cutting and Welding Required During Installation
Volvo
7801991
  • 2.3L L4 2316CC
  • Cutting and Welding Required During Installation