100% CANADIAN BASED 100% CANADIAN
NO DUTIES OR CUSTOMS FEES NO CUSTOMS FEES
AUTHORIZED DEALER AUTH. DEALER
30-DAY HASSLE-FREE RETURNS 30-DAY RETURNS

MagnaFlowStainless Federal Catalytic Converter without Sensor Port (2.25" IN\/2.25" OUT)

AUTHORIZED DEALER

93505

Manufacturer Part Number
*Images are for illustrative purpose only. Actual Product may differ.
SKU: MAG-93505
Please select a vehicle to verify fitment.

Please Select a Vehicle

This will be used to show you compatible parts.

Auto Parts Finder

This product doesn't fit your selection!

The product shown on this page is not compatible with the selected vehicle

!
To ensure proper parts fitment, please browse compatible products or change your selection.


Change Current Selection
FREE Shipping*
Standard Warranty

Pedido Especial
1-3 Semanas
CA $222.00
Stainless Federal Catalytic Converter without Sensor Port (2.25" IN\/2.25" OUT) is available to buy in increments of 1
AUTHORIZED DEALER

93505

Manufacturer Part Number
More Information
Fabricante MagnaFlow
Número de Pieza del Fabricante 93505
Precio de Venta Sugerido por el Fabricante (MSRP) 180.31
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
This table represents all the 73 compatible vehicles for this part:
Make Model Year
Application Notes
Position Engine Aspiration Additional Information
Acura Legend 1993
  • 3.2L V6 3206CC
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Acura Legend 1994
  • 3.2L V6 3206CC
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Cadillac Seville 1980
  • 6L V8 368CID
  • without Air Tube
  • Cutting and Welding Required During Installation
Chevrolet El Camino 1975
  • 6.6L V8 400CID
  • Cutting and Welding Required During Installation
Chevrolet El Camino 1976
  • 6.6L V8 400CID
  • Cutting and Welding Required During Installation
Chevrolet Spectrum 1987
  • 1.5L L4 1471CC/92cCID
  • Naturally Aspirated
  • Front and Rear
  • Cutting and Welding Required During Installation
Chevrolet Spectrum 1988
  • 1.5L L4 1471CC/92cCID
  • Naturally Aspirated
  • Cut To Fit
  • Cutting and Welding Required During Installation
Chrysler Conquest 1987
  • 2.6L L4 2555CC/156CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Chrysler Conquest 1988
  • 2.6L L4 2555CC/156CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Chrysler Conquest 1989
  • 2.6L L4 2555CC/156CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Chrysler Cordoba 1975
  • 6.6L V8 6556CC/400CID
  • Cutting and Welding Required During Installation
Chrysler Cordoba 1976
  • 6.6L V8 6556CC/400CID
  • Cutting and Welding Required During Installation
Chrysler Cordoba 1977
  • 6.6L V8 6556CC/400CID
  • Cutting and Welding Required During Installation
Chrysler Cordoba 1978
  • 6.6L V8 6556CC/400CID
  • Cutting and Welding Required During Installation
Dodge Charger 1975
  • 6.6L V8 400CID
  • Cutting and Welding Required During Installation
Dodge Charger 1976
  • 6.6L V8 6556CC/400CID
  • Cutting and Welding Required During Installation
Dodge Charger 1977
  • 6.6L V8 6556CC/400CID
  • Cutting and Welding Required During Installation
Dodge Charger 1978
  • 6.6L V8 6556CC/400CID
  • Cutting and Welding Required During Installation
Dodge Coronet 1975
  • 6.6L V8 400CID
  • 7.2L V8 7211CC/440CID
  • 6.6L V8 6556CC/400CID
  • Cutting and Welding Required During Installation
Dodge Coronet 1976
  • 7.2L V8 7211CC/440CID
  • 6.6L V8 6556CC/400CID
  • Cutting and Welding Required During Installation
Dodge Magnum 1978
  • 6.6L V8 6556CC/400CID
  • Cutting and Welding Required During Installation
Dodge Royal Monaco 1975
  • Left
  • Right
  • 6.6L V8 400CID
  • 7.2L V8 7211CC/440CID
  • Dual Exhaust
  • Cutting and Welding Required During Installation
Dodge Royal Monaco 1976
  • Left
  • Right
  • 7.2L V8 7211CC/440CID
  • 6.6L V8 6556CC/400CID
  • Cutting and Welding Required During Installation
  • Dual Exhaust
Dodge Royal Monaco 1977
  • Left
  • Right
  • 7.2L V8 7211CC/440CID
  • 6.6L V8 6556CC/400CID
  • Dual Exhaust
  • Cutting and Welding Required During Installation
Dodge Stealth 1994
  • 3L V6 2972CC/181CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Dodge Stealth 1995
  • 3L V6 2972CC/181CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Ford Aerostar 1986
  • 2.8L V6 171CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford F-250 1980
  • 6.6L V8 400CID
  • Cutting and Welding Required During Installation
Ford F-250 1981
  • 6.6L V8 400CID
  • Cutting and Welding Required During Installation
Ford F-350 1980
  • 6.6L V8 400CID
  • Cutting and Welding Required During Installation
Ford F-350 1981
  • 6.6L V8 400CID
  • Cutting and Welding Required During Installation
Ford LTD 1985
  • 3.8L V6 232CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Ford LTD 1986
  • 3.8L V6 232CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Ford Thunderbird 1977
  • Left
  • Right
  • 6.6L V8 400CID
  • Cutting and Welding Required During Installation
Ford Thunderbird 1978
  • Left
  • Right
  • 6.6L V8 400CID
  • Cutting and Welding Required During Installation
GMC Sprint 1975
  • 7.4L V8 454CID
  • 6.6L V8 400CID
  • Cutting and Welding Required During Installation
GMC Sprint 1976
  • 6.6L V8 400CID
  • Cutting and Welding Required During Installation
Lincoln Continental 1977
  • Left
  • Right
  • 6.6L V8 400CID
  • Cutting and Welding Required During Installation
Lincoln Continental 1978
  • Left
  • Right
  • 6.6L V8 400CID
  • Cutting and Welding Required During Installation
Lincoln Continental 1979
  • Left
  • Right
  • 6.6L V8 400CID
  • Cutting and Welding Required During Installation
Lincoln Mark V 1977
  • Left
  • Right
  • 6.6L V8 400CID
  • Cutting and Welding Required During Installation
Lincoln Mark V 1978
  • Left
  • Right
  • 6.6L V8 400CID
  • Cutting and Welding Required During Installation
Lincoln Mark V 1979
  • Left
  • Right
  • 6.6L V8 400CID
  • Cutting and Welding Required During Installation
Mazda 626 1981
  • 2L L4 1970CC
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mazda 626 1982
  • 2L L4 1970CC
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mercedes-Benz 450SEL 1977
  • 6.8L V8 6835CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 450SEL 1978
  • 6.8L V8 6835CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 450SEL 1979
  • 6.8L V8 6835CC
  • Cutting and Welding Required During Installation
Mercury Cougar 1977
  • Right
  • 6.6L V8 400CID
  • Cutting and Welding Required During Installation
Mercury Cougar 1978
  • Right
  • 6.6L V8 400CID
  • Cutting and Welding Required During Installation
Mercury Marquis 1985
  • 3.8L V6 232CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mercury Marquis 1986
  • 3.8L V6 232CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mitsubishi 3000GT 1991
  • 3L V6 2972CC/181CID
  • Turbocharged
  • Front and Rear
  • Cutting and Welding Required During Installation
Mitsubishi 3000GT 1992
  • 3L V6 2972CC/181CID
  • Turbocharged
  • Front and Rear
  • Cutting and Welding Required During Installation
Mitsubishi 3000GT 1993
  • 3L V6 2972CC/181CID
  • Turbocharged
  • Front and Rear
  • Cutting and Welding Required During Installation
Mitsubishi 3000GT 1994
  • 3L V6 2972CC/181CID
  • Turbocharged
  • Front and Rear
  • Cutting and Welding Required During Installation
Mitsubishi 3000GT 1995
  • 3L V6 2972CC/181CID
  • Turbocharged
  • Front and Rear
  • Cutting and Welding Required During Installation
Mitsubishi Diamante 1994
  • 3L V6 2972CC/181CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Plymouth Fury 1977
  • 6.6L V8 6556CC/400CID
  • Cutting and Welding Required During Installation
Plymouth Fury 1978
  • 6.6L V8 6556CC/400CID
  • Cutting and Welding Required During Installation
Pontiac Firebird 1975
  • 6.6L V8 400CID
  • Cutting and Welding Required During Installation
Pontiac Firebird 1977
  • 6.6L V8 403CID
  • Cutting and Welding Required During Installation
Pontiac Firebird 1978
  • 6.6L V8 400CID
  • 6.6L V8 403CID
  • Cutting and Welding Required During Installation
Pontiac Firebird 1979
  • 6.6L V8 400CID
  • 6.6L V8 403CID
  • Cutting and Welding Required During Installation
Pontiac Firebird 1980
  • 5L V8 305CID
  • Dual Exhaust
  • Cutting and Welding Required During Installation
Toyota Cressida 1981
  • 2.8L L6 2759CC
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Toyota Cressida 1982
  • 2.8L L6 2759CC
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Toyota Supra 1987
  • 3L L6 2954CC
  • Naturally Aspirated
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Toyota Supra 1988
  • 3L L6 2954CC
  • Naturally Aspirated
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Toyota Supra 1989
  • 3L L6 2954CC
  • Naturally Aspirated
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Toyota Supra 1990
  • 3L L6 2954CC
  • Naturally Aspirated
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Toyota Supra 1991
  • 3L L6 2954CC
  • Naturally Aspirated
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Toyota Supra 1992
  • 3L L6 2954CC
  • Naturally Aspirated
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation