100% CANADIAN BASED 100% CANADIAN
NO DUTIES OR CUSTOMS FEES NO CUSTOMS FEES
AUTHORIZED DEALER AUTH. DEALER
30-DAY HASSLE-FREE RETURNS 30-DAY RETURNS

MagnaFlowStainless Federal Catalytic Converter without Sensor Port (2.5" IN\/2.5" OUT)

AUTHORIZED DEALER

91006

Manufacturer Part Number
*Images are for illustrative purpose only. Actual Product may differ.
SKU: MAG-91006
Please select a vehicle to verify fitment.

Please Select a Vehicle

This will be used to show you compatible parts.

Auto Parts Finder

This product doesn't fit your selection!

The product shown on this page is not compatible with the selected vehicle

!
To ensure proper parts fitment, please browse compatible products or change your selection.


Change Current Selection
FREE Shipping*
Standard Warranty

Pedido Especial
1-3 Semanas
CA $134.00
Stainless Federal Catalytic Converter without Sensor Port (2.5" IN\/2.5" OUT) is available to buy in increments of 1
AUTHORIZED DEALER

91006

Manufacturer Part Number
More Information
Fabricante MagnaFlow
Número de Pieza del Fabricante 91006
Precio de Venta Sugerido por el Fabricante (MSRP) 105.52
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
This table represents all the 225 compatible vehicles for this part:
MakeModelYear
Application Notes
PositionTransmissionBody TypeDrive TypeEngineAspirationAdditional Information
Buick
LeSabre1995
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick
Park Avenue1995
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick
Regal1990
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick
Regal1991
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick
Regal1992
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick
Regal1993
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Chevrolet
Camaro1993
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Chevrolet
Camaro1994
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Chevrolet
Camaro1995
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Chevrolet
Lumina1991
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Chevrolet
Lumina1992
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Chevrolet
Lumina1993
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Chevrolet
Lumina1994
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Chevrolet
Lumina1995
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Chevrolet
Lumina APV1992
  • 3.8L V6 3800CC/231CID
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Chevrolet
Monte Carlo1995
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Chevrolet
Spectrum1985
  • 1.5L L4 1471CC/92cCID
  • Cutting and Welding Required During Installation
Chevrolet
Spectrum1986
  • 1.5L L4 1471CC/92cCID
  • Cutting and Welding Required During Installation
Chevrolet
Spectrum1987
  • 1.5L L4 1471CC/92cCID
  • Cutting and Welding Required During Installation
Chevrolet
Spectrum1988
  • Rear
  • 1.5L L4 1471CC/92cCID
  • Cutting and Welding Required During Installation
Chrysler
Daytona1988
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
  • CAN
Chrysler
Daytona1989
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
  • CAN
Chrysler
Daytona1990
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
  • CAN
Chrysler
Imperial1990
  • 3.3L V6 3301CC/201CID
  • Cutting and Welding Required During Installation
Chrysler
Imperial1991
  • 3.3L V6 3301CC/201CID
  • 3.8L V6 3778CC/231CID
  • Cutting and Welding Required During Installation
Chrysler
LeBaron1987
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Chrysler
LeBaron1988
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Chrysler
LeBaron1989
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Chrysler
LeBaron1990
  • 2.5L L4 2507CC/153CID
  • 3L V6 2972CC/181CID
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Chrysler
LeBaron1991
  • 2.5L L4 2507CC/153CID
  • 3L V6 2972CC/181CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Chrysler
LeBaron1992
  • 2.5L L4 2507CC/153CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Chrysler
New Yorker1988
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Chrysler
New Yorker1989
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Chrysler
New Yorker1990
  • 3.3L V6 3301CC/201CID
  • Cutting and Welding Required During Installation
Chrysler
Town & Country1987
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Chrysler
Town & Country1988
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge
6001986
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge
6001987
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge
6001988
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge
Dakota1994
  • Standard Cab Pickup
  • 4WD
  • RWD
  • 3.9L V6 3906CC/239CID
  • 78
  • Cutting and Welding Required During Installation
Dodge
Dakota1995
  • Standard Cab Pickup
  • 4WD
  • RWD
  • 3.9L V6 3906CC/239CID
  • 78
  • Cutting and Welding Required During Installation
Dodge
Daytona1987
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge
Daytona1988
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge
Daytona1989
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge
Daytona1990
  • 2.5L L4 2507CC/153CID
  • 3L V6 2972CC/181CID
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge
Daytona1991
  • 2.5L L4 2507CC/153CID
  • 3L V6 2972CC/181CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge
Daytona1992
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge
Daytona1993
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge
Dynasty1988
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge
Dynasty1989
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge
Dynasty1990
  • 3.3L V6 3301CC/201CID
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge
Dynasty1991
  • 3.3L V6 3301CC/201CID
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge
Dynasty1992
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge
Dynasty1993
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge
Lancer1989
  • 2.5L L4 2507CC/153CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge
Neon1995
  • 2L L4 1996CC/122CID
  • Cutting and Welding Required During Installation
Dodge
Shadow1988
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge
Spirit1989
  • 2.5L L4 2507CC/153CID
  • 3L V6 2972CC/181CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge
Spirit1990
  • 2.5L L4 2507CC/153CID
  • 3L V6 2972CC/181CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge
Spirit1991
  • 2.5L L4 2507CC/153CID
  • 3L V6 2972CC/181CID
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge
Spirit1992
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge
W1501982
  • Rear
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Dodge
W1501983
  • Rear
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Dodge
W1501984
  • Rear
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge
W2501982
  • Rear
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge
W2501983
  • Rear
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Dodge
W2501984
  • Rear
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Ford
Bronco II1986
  • Rear
  • 2.9L V6 177CID
  • Cutting and Welding Required During Installation
Ford
Bronco II1987
  • Rear
  • 2.9L V6 177CID
  • Cutting and Welding Required During Installation
Ford
E-100 Econoline1975
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford
E-100 Econoline1976
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford
E-100 Econoline1977
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford
E-100 Econoline1978
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford
Explorer1991
  • Front
  • Rear
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford
Explorer1992
  • Front
  • Rear
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford
Explorer1993
  • Front
  • Rear
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford
Explorer1994
  • Front
  • Rear
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford
F-1001977
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford
F-1001978
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford
F-1001979
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford
Ranger1986
  • Rear
  • 2.9L V6 177CID
  • Cutting and Welding Required During Installation
Ford
Ranger1987
  • Rear
  • 2.9L V6 177CID
  • Cutting and Welding Required During Installation
Ford
Ranger1989
  • Rear
  • Extended Cab Pickup
  • 2.9L V6 177CID
  • Cutting and Welding Required During Installation
Ford
Ranger1990
  • Front
  • Rear
  • 2.9L V6 177CID
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford
Ranger1991
  • Front
  • Rear
  • 2.9L V6 177CID
  • 4L V6 245CID
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Ford
Ranger1992
  • Front
  • Rear
  • 2.9L V6 177CID
  • 4L V6 245CID
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Ford
Ranger1993
  • Front
  • Rear
  • 4L V6 245CID
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Ford
Ranger1994
  • Front
  • Rear
  • 4L V6 245CID
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Ford
Thunderbird1987
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Ford
Thunderbird1988
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Geo
Spectrum1989
  • Rear
  • 1.5L L4 1471CC/92cCID
  • Cutting and Welding Required During Installation
Geo
Storm1992
  • 1.8L L4 1817CC
  • 1.6L L4 1588CC/98cCID
  • Cutting and Welding Required During Installation
Geo
Storm1993
  • 1.8L L4 1817CC
  • 1.6L L4 1588CC/98cCID
  • Cutting and Welding Required During Installation
Isuzu
Amigo1989
  • 2.3L L4 2254CC
  • 2.6L L4 2559CC
  • Cutting and Welding Required During Installation
Isuzu
Amigo1990
  • 2.3L L4 2254CC
  • 2.6L L4 2559CC
  • Cutting and Welding Required During Installation
Isuzu
Amigo1991
  • 2.3L L4 2254CC
  • 2.6L L4 2559CC
  • Cutting and Welding Required During Installation
Isuzu
Amigo1992
  • 2.3L L4 2254CC
  • 2.6L L4 2559CC
  • Cutting and Welding Required During Installation
Isuzu
Amigo1993
  • 2.3L L4 2254CC
  • 2.6L L4 2559CC
  • Cutting and Welding Required During Installation
Isuzu
Amigo1994
  • 2.6L L4 2559CC
  • Cutting and Welding Required During Installation
Isuzu
I-Mark1981
  • 1.8L L4 1817CC
  • Cutting and Welding Required During Installation
Isuzu
I-Mark1982
  • 1.8L L4 1817CC
  • Cutting and Welding Required During Installation
Isuzu
I-Mark1983
  • 1.8L L4 1817CC
  • Cutting and Welding Required During Installation
Isuzu
I-Mark1984
  • 1.8L L4 1817CC
  • Cutting and Welding Required During Installation
Isuzu
I-Mark1985
  • 1.8L L4 1817CC
  • 1.5L L4 1471CC
  • GAS
  • Cutting and Welding Required During Installation
Isuzu
I-Mark1986
  • 1.5L L4 1471CC
  • Cutting and Welding Required During Installation
Isuzu
I-Mark1987
  • Rear
  • 1.5L L4 1471CC
  • Cutting and Welding Required During Installation
Isuzu
I-Mark1988
  • Rear
  • 1.5L L4 1471CC
  • Cutting and Welding Required During Installation
Isuzu
I-Mark1989
  • Rear
  • 1.5L L4 1471CC
  • Cutting and Welding Required During Installation
Isuzu
Impulse1983
  • 1.9L L4 1949CC
  • Cutting and Welding Required During Installation
Isuzu
Impulse1984
  • 1.9L L4 1949CC
  • Cutting and Welding Required During Installation
Isuzu
Impulse1985
  • 1.9L L4 1949CC
  • 2L L4 1994CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Isuzu
Impulse1986
  • 1.9L L4 1949CC
  • 2L L4 1994CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Isuzu
Impulse1987
  • 1.9L L4 1949CC
  • 2L L4 1994CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Isuzu
Impulse1988
  • 2.3L L4 2254CC
  • 2L L4 1994CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Isuzu
Impulse1989
  • 2.3L L4 2254CC
  • 2L L4 1994CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Isuzu
Impulse1990
  • 1.6L L4 1588CC
  • Cutting and Welding Required During Installation
Isuzu
Impulse1991
  • Right
  • 1.6L L4 1588CC
  • Naturally Aspirated
  • Turbocharged
  • Cutting and Welding Required During Installation
Isuzu
Impulse1992
  • Rear
  • 1.6L L4 1588CC
  • 1.8L L4 1817CC
  • Cutting and Welding Required During Installation
Isuzu
Pickup1981
  • 1.8L L4 1817CC
  • Cutting and Welding Required During Installation
Isuzu
Pickup1982
  • 1.8L L4 1817CC
  • Cutting and Welding Required During Installation
Isuzu
Pickup1983
  • 1.9L L4 1949CC
  • Cutting and Welding Required During Installation
Isuzu
Pickup1984
  • 1.9L L4 1949CC
  • Cutting and Welding Required During Installation
Isuzu
Pickup1985
  • 1.9L L4 1949CC
  • Cutting and Welding Required During Installation
Isuzu
Pickup1986
  • 2.3L L4 2254CC
  • 1.9L L4 1949CC
  • Cutting and Welding Required During Installation
Isuzu
Pickup1987
  • 2.3L L4 2254CC
  • 1.9L L4 1949CC
  • Cutting and Welding Required During Installation
Isuzu
Pickup1988
  • 2.3L L4 2254CC
  • 2.6L L4 2559CC
  • Cutting and Welding Required During Installation
  • CAN
Isuzu
Pickup1989
  • 2.3L L4 2254CC
  • 2.6L L4 2559CC
  • Cutting and Welding Required During Installation
Isuzu
Pickup1990
  • 2.3L L4 2254CC
  • 2.6L L4 2559CC
  • Cutting and Welding Required During Installation
Isuzu
Pickup1991
  • 2.3L L4 2254CC
  • 2.6L L4 2559CC
  • 3.1L V6 3137CC
  • Cutting and Welding Required During Installation
Isuzu
Pickup1992
  • 2.3L L4 2254CC
  • 2.6L L4 2559CC
  • 3.1L V6 3137CC
  • Cutting and Welding Required During Installation
Isuzu
Pickup1993
  • Rear
  • 2.3L L4 2254CC
  • 2.6L L4 2559CC
  • 3.1L V6 3137CC
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
  • California Emissions Equipped Vehicles Registered Outside Of California
Isuzu
Pickup1994
  • Rear
  • 2.3L L4 2254CC
  • 2.6L L4 2559CC
  • 3.1L V6 3137CC
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
  • California Emissions Equipped Vehicles Registered Outside Of California
Isuzu
Pickup1995
  • Rear
  • 2.3L L4 2254CC
  • 2.6L L4 2559CC
  • Cutting and Welding Required During Installation
Isuzu
Rodeo1991
  • 2.6L L4 2559CC
  • 3.1L V6 3137CC
  • Cutting and Welding Required During Installation
Isuzu
Rodeo1992
  • 2.6L L4 2559CC
  • 3.1L V6 3137CC
  • Cutting and Welding Required During Installation
Isuzu
Rodeo1993
  • Rear
  • 2.6L L4 2559CC
  • 3.2L V6 3165CC
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
  • California Emissions Equipped Vehicles Registered Outside Of California
Isuzu
Rodeo1994
  • Rear
  • 2.6L L4 2559CC
  • Cutting and Welding Required During Installation
Isuzu
Rodeo1995
  • Rear
  • 2.6L L4 2559CC
  • Cutting and Welding Required During Installation
Isuzu
Trooper1984
  • 1.9L L4 1949CC
  • Cutting and Welding Required During Installation
Isuzu
Trooper1985
  • 1.9L L4 1949CC
  • Cutting and Welding Required During Installation
Isuzu
Trooper1986
  • 2.3L L4 2254CC
  • Cutting and Welding Required During Installation
Isuzu
Trooper1987
  • 2.3L L4 2254CC
  • Cutting and Welding Required During Installation
Isuzu
Trooper1988
  • 2.6L L4 2559CC
  • Cutting and Welding Required During Installation
Isuzu
Trooper1989
  • 2.6L L4 2559CC
  • 2.8L V6 2827CC
  • Cutting and Welding Required During Installation
Isuzu
Trooper1990
  • 2.6L L4 2559CC
  • 2.8L V6 2827CC
  • Cutting and Welding Required During Installation
Isuzu
Trooper1991
  • 2.6L L4 2559CC
  • 2.8L V6 2827CC
  • Cutting and Welding Required During Installation
Isuzu
Trooper1994
  • Rear
  • 3.2L V6 3165CC
  • Cutting and Welding Required During Installation
Isuzu
Trooper1995
  • Rear
  • 3.2L V6 3165CC
  • Cutting and Welding Required During Installation
Jeep
Cherokee1979
  • 4.2L L6 258CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Jeep
Cherokee1980
  • 4.2L L6 258CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Jeep
Cherokee1981
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
Jeep
CJ51979
  • 4.2L L6 258CID
  • 5L V8 304CID
  • Cutting and Welding Required During Installation
Jeep
CJ51980
  • 4.2L L6 258CID
  • 5L V8 304CID
  • 2.5L L4 151CID
  • Cutting and Welding Required During Installation
Jeep
CJ51981
  • 4.2L L6 258CID
  • 2.5L L4 151CID
  • Cutting and Welding Required During Installation
Jeep
CJ51982
  • 2.5L L4 151CID
  • Cutting and Welding Required During Installation
Jeep
CJ51983
  • 2.5L L4 151CID
  • Cutting and Welding Required During Installation
Jeep
Scrambler1981
  • 4.2L L6 258CID
  • 2.5L L4 151CID
  • Cutting and Welding Required During Installation
Jeep
Scrambler1982
  • 2.5L L4 151CID
  • Cutting and Welding Required During Installation
Jeep
Scrambler1983
  • 2.5L L4 151CID
  • Cutting and Welding Required During Installation
Jeep
Wagoneer1979
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Jeep
Wagoneer1980
  • 4.2L L6 258CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Jeep
Wagoneer1981
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
Lexus
ES3001992
  • 3L V6 2959CC
  • Cutting and Welding Required During Installation
Lexus
ES3001993
  • 3L V6 2959CC
  • Cutting and Welding Required During Installation
Mazda
9291992
  • Rear
  • 3L V6 2954CC/180CID
  • Cutting and Welding Required During Installation
Mazda
9291993
  • Rear
  • 3L V6 2954CC/180CID
  • Cutting and Welding Required During Installation
Mazda
9291994
  • Rear
  • 3L V6 2954CC/180CID
  • Cutting and Welding Required During Installation
Mazda
9291995
  • Rear
  • 3L V6 2954CC/180CID
  • Cutting and Welding Required During Installation
Mazda
Navajo1991
  • Front
  • Rear
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Mazda
Navajo1992
  • Front
  • Rear
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Mazda
Navajo1993
  • Front
  • Rear
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Mazda
Navajo1994
  • Front
  • Rear
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Oldsmobile
Cutlass Supreme1992
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Oldsmobile
Cutlass Supreme1993
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Oldsmobile
Cutlass Supreme1994
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Oldsmobile
Cutlass Supreme1995
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Oldsmobile
Silhouette1992
  • 3.8L V6 3800CC/231CID
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Plymouth
Acclaim1989
  • 2.5L L4 2507CC/153CID
  • 3L V6 2972CC/181CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Plymouth
Acclaim1990
  • 2.5L L4 2507CC/153CID
  • 3L V6 2972CC/181CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Plymouth
Acclaim1991
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Plymouth
Grand Voyager1991
  • 3.3L V6 3301CC/201CID
  • Cutting and Welding Required During Installation
Plymouth
Neon1995
  • 2L L4 1996CC/122CID
  • Cutting and Welding Required During Installation
Plymouth
Sundance1988
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Pontiac
Bonneville1995
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Pontiac
Firebird1993
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Pontiac
Firebird1994
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Pontiac
Firebird1995
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Pontiac
Grand Prix1991
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Pontiac
Grand Prix1992
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Pontiac
Grand Prix1993
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Pontiac
Grand Prix1994
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Pontiac
Grand Prix1995
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Pontiac
Trans Sport1992
  • 3.8L V6 3800CC/231CID
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Porsche
9441986
  • 2.5L L4 2475CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Porsche
9441987
  • 2.5L L4 2475CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Porsche
9441988
  • 2.5L L4 2475CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Porsche
9441989
  • 2.5L L4 2475CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Volvo
7401985
  • 2.3L L4 2316CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Volvo
7401986
  • 2.3L L4 2316CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Volvo
7401987
  • 2.3L L4 2316CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Volvo
7401988
  • 2.3L L4 2316CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Volvo
7401989
  • 2.3L L4 2316CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Volvo
7401990
  • 2.3L L4 2316CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Volvo
7401991
  • 2.3L L4 2316CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Volvo
7401992
  • 2.3L L4 2316CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Volvo
7451985
  • 2.3L L4 2316CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Volvo
7601984
  • 2.3L L4 2316CC
  • Cutting and Welding Required During Installation
Volvo
7601985
  • 2.3L L4 2316CC
  • Cutting and Welding Required During Installation
Volvo
7601986
  • 2.3L L4 2316CC
  • Cutting and Welding Required During Installation
Volvo
7601987
  • 2.8L V6 2849CC
  • 2.3L L4 2316CC
  • Cutting and Welding Required During Installation
Volvo
7601988
  • 2.8L V6 2849CC
  • 2.3L L4 2316CC
  • Cutting and Welding Required During Installation
Volvo
7601989
  • 2.8L V6 2849CC
  • 2.3L L4 2316CC
  • Cutting and Welding Required During Installation
Volvo
7601990
  • 2.8L V6 2849CC
  • 2.3L L4 2316CC
  • Cutting and Welding Required During Installation
Volvo
7801987
  • 2.8L V6 2849CC
  • Cutting and Welding Required During Installation
Volvo
7801988
  • 2.8L V6 2849CC
  • Cutting and Welding Required During Installation
Volvo
7801989
  • 2.8L V6 2849CC
  • Cutting and Welding Required During Installation
Volvo
7801990
  • 2.8L V6 2849CC
  • Cutting and Welding Required During Installation
Volvo
8501993
  • 2.4L L5 2435CC
  • Cutting and Welding Required During Installation
Volvo
8501994
  • 2.3L L5 2319CC
  • 2.4L L5 2435CC
  • Cutting and Welding Required During Installation
Volvo
8501995
  • Automatic
  • 2.3L L5 2319CC
  • 2.4L L5 2435CC
  • Cutting and Welding Required During Installation
Volvo
9401991
  • 2.3L L4 2316CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Volvo
9401992
  • 2.3L L4 2316CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Volvo
9401993
  • 2.3L L4 2316CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Volvo
9401994
  • 2.3L L4 2316CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Volvo
9401995
  • 2.3L L4 2316CC
  • Turbocharged
  • Cutting and Welding Required During Installation