100% CANADIAN BASED 100% CANADIAN
NO DUTIES OR CUSTOMS FEES NO CUSTOMS FEES
AUTHORIZED DEALER AUTH. DEALER
30-DAY HASSLE-FREE RETURNS 30-DAY RETURNS

MagnaFlowStainless Federal Catalytic Converter without Sensor Port (2" IN\/2" OUT)

AUTHORIZED DEALER

94004

Manufacturer Part Number
*Images are for illustrative purpose only. Actual Product may differ.
SKU: MAG-94004
Please select a vehicle to verify fitment.

Please Select a Vehicle

This will be used to show you compatible parts.

Auto Parts Finder

This product doesn't fit your selection!

The product shown on this page is not compatible with the selected vehicle

!
To ensure proper parts fitment, please browse compatible products or change your selection.


Change Current Selection
FREE Shipping*
Standard Warranty

Pedido Especial
2-4 Weeks
CA $163.00
Stainless Federal Catalytic Converter without Sensor Port (2" IN\/2" OUT) is available to buy in increments of 1
AUTHORIZED DEALER

94004

Manufacturer Part Number
More Information
Fabricante MagnaFlow
Número de Pieza del Fabricante 94004
Precio de Venta Sugerido por el Fabricante (MSRP) 114.76
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
This table represents all the 471 compatible vehicles for this part:
Make Model Year
Application Notes
Position Submodel Transmission Body Type Engine Aspiration Additional Information
Alfa Romeo Alfetta 1975
  • 2L L4 1961CC/120CID
  • Cutting and Welding Required During Installation
Alfa Romeo Alfetta 1976
  • 2L L4 1961CC/120CID
  • Cutting and Welding Required During Installation
Alfa Romeo Alfetta 1977
  • 2L L4 1961CC/120CID
  • Cutting and Welding Required During Installation
Alfa Romeo Spider 1975
  • 2L L4 1961CC/120CID
  • Cutting and Welding Required During Installation
Alfa Romeo Spider 1976
  • 2L L4 1961CC/120CID
  • Cutting and Welding Required During Installation
Alfa Romeo Spider 1977
  • 2L L4 1961CC/120CID
  • Cutting and Welding Required During Installation
Alfa Romeo Spider 1978
  • 2L L4 1961CC/120CID
  • Cutting and Welding Required During Installation
Alfa Romeo Spider 1979
  • 2L L4 1961CC/120CID
  • Cutting and Welding Required During Installation
Alfa Romeo Spider 1980
  • 2L L4 1961CC/120CID
  • Cutting and Welding Required During Installation
Alfa Romeo Spider 1981
  • 2L L4 1961CC/120CID
  • Cutting and Welding Required During Installation
American Motors AMX 1978
  • Right
  • Left
  • Rear
  • 5L V8 304CID
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
  • without Dual Converters
  • Dual Converters
American Motors AMX 1979
  • Right
  • Left
  • Rear
  • 5L V8 304CID
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
  • without Dual Converters
  • Dual Converters
American Motors Concord 1978
  • Right
  • Left
  • Rear
  • 5L V8 304CID
  • 2L L4 121CID
  • 3.8L L6 232CID
  • Cutting and Welding Required During Installation
  • Excluding Dual Exhaust
  • Dual Exhaust
American Motors Concord 1979
  • Right
  • Left
  • 5L V8 304CID
  • Cutting and Welding Required During Installation
  • Excluding Dual Exhaust
  • Dual Exhaust
American Motors Concord 1980
  • Rear
  • 2.5L L4 151CID
  • Cutting and Welding Required During Installation
American Motors Concord 1981
  • Rear
  • 2.5L L4 151CID
  • Cutting and Welding Required During Installation
American Motors Concord 1982
  • Rear
  • 2.5L L4 151CID
  • Cutting and Welding Required During Installation
American Motors Eagle 1981
  • 2.5L L4 151CID
  • without Air Tube
  • Cutting and Welding Required During Installation
American Motors Eagle 1982
  • 2.5L L4 151CID
  • without Air Tube
  • Cutting and Welding Required During Installation
American Motors Eagle 1983
  • SX4
  • 2.5L L4 150CID
  • 2.5L L4 151CID
  • Cutting and Welding Required During Installation
  • without Air Tube
American Motors Gremlin 1975
  • Right
  • Left
  • 5L V8 304CID
  • 3.8L L6 232CID
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
  • without Dual Converters
  • Dual Converters
American Motors Gremlin 1976
  • Right
  • Left
  • 5L V8 304CID
  • 3.8L L6 232CID
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
  • without Dual Converters
  • Dual Converters
American Motors Gremlin 1977
  • 2L L4 121CID
  • 3.8L L6 232CID
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
American Motors Gremlin 1978
  • Rear
  • 2L L4 121CID
  • 3.8L L6 232CID
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
American Motors Hornet 1975
  • Right
  • Left
  • 5L V8 304CID
  • 3.8L L6 232CID
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
  • without Dual Converters
  • Dual Converters
American Motors Hornet 1976
  • Right
  • Left
  • 5L V8 304CID
  • 3.8L L6 232CID
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
  • without Dual Converters
  • Dual Converters
American Motors Hornet 1977
  • Right
  • Left
  • 5L V8 304CID
  • 3.8L L6 232CID
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
  • without Dual Converters
  • Dual Converters
American Motors Matador 1975
  • Right
  • Left
  • 5.9L V8 360CID
  • 5L V8 304CID
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
  • without Dual Converters
  • Dual Converters
American Motors Matador 1976
  • Right
  • Left
  • 5.9L V8 360CID
  • 5L V8 304CID
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
  • without Dual Converters
  • Dual Converters
American Motors Matador 1977
  • Right
  • Left
  • 5.9L V8 360CID
  • 5L V8 304CID
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
  • without Dual Converters
  • Dual Converters
American Motors Matador 1978
  • Right
  • Left
  • 5.9L V8 360CID
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
  • Dual Converters
American Motors Pacer 1975
  • 3.8L L6 232CID
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
American Motors Pacer 1976
  • 3.8L L6 232CID
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
American Motors Pacer 1978
  • Right
  • Left
  • Rear
  • 5L V8 304CID
  • 3.8L L6 232CID
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
  • without Dual Converters
  • Dual Converters
American Motors Pacer 1979
  • Right
  • Left
  • Rear
  • 5L V8 304CID
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
  • without Dual Converters
  • Dual Converters
American Motors Pacer 1980
  • Rear
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
American Motors Spirit 1979
  • 2L L4 121CID
  • 5L V8 304CID
  • 3.8L L6 232CID
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
American Motors Spirit 1980
  • 2.5L L4 151CID
  • Cutting and Welding Required During Installation
American Motors Spirit 1981
  • Rear
  • 2.5L L4 151CID
  • Cutting and Welding Required During Installation
American Motors Spirit 1982
  • Rear
  • 2.5L L4 151CID
  • Cutting and Welding Required During Installation
Audi 90 1993
  • Left
  • Automatic
  • 2.8L V6
  • Cutting and Welding Required During Installation
BMW 318i 1984
  • 1.8L L4 1766CC/107CID
  • Cutting and Welding Required During Installation
  • Split Date To: To 12/1984
BMW 318i 1985
  • 1.8L L4 1766CC/107CID
  • Cutting and Welding Required During Installation
  • Split Date From: From 01/1985
BMW 318i 1991
  • 1.8L L4 1796CC
  • Cutting and Welding Required During Installation
BMW 318i 1992
  • 1.8L L4 1796CC
  • Cutting and Welding Required During Installation
BMW 318i 1993
  • 1.8L L4 1796CC
  • Cutting and Welding Required During Installation
BMW 318i 1994
  • 1.8L L4 1796CC
  • Cutting and Welding Required During Installation
BMW 318i 1995
  • 1.8L L4 1796CC
  • Cutting and Welding Required During Installation
BMW 318is 1991
  • 1.8L L4 1796CC
  • Cutting and Welding Required During Installation
BMW 318is 1992
  • 1.8L L4 1796CC
  • Cutting and Welding Required During Installation
BMW 318is 1993
  • 1.8L L4 1796CC
  • Cutting and Welding Required During Installation
BMW 318is 1994
  • 1.8L L4 1796CC
  • Cutting and Welding Required During Installation
BMW 318is 1995
  • 1.8L L4 1796CC
  • Cutting and Welding Required During Installation
BMW 318ti 1995
  • 1.8L L4 1796CC
  • Cutting and Welding Required During Installation
BMW 320i 1980
  • 1.8L L4 1766CC/107CID
  • Cutting and Welding Required During Installation
BMW 320i 1981
  • 1.8L L4 1766CC/107CID
  • Cutting and Welding Required During Installation
BMW 320i 1982
  • 1.8L L4 1766CC/107CID
  • Cutting and Welding Required During Installation
BMW 320i 1983
  • 1.8L L4 1766CC/107CID
  • Cutting and Welding Required During Installation
BMW 740i 1993
  • Left
  • Right
  • 4L V8 3982CC
  • Cutting and Welding Required During Installation
BMW 740i 1994
  • Left
  • Right
  • 4L V8 3982CC
  • Cutting and Welding Required During Installation
BMW 740i 1995
  • Left
  • Right
  • 4L V8 3982CC
  • Cutting and Welding Required During Installation
BMW 740iL 1993
  • Left
  • Right
  • 4L V8 3982CC
  • Cutting and Welding Required During Installation
BMW 740iL 1994
  • Left
  • Right
  • 4L V8 3982CC
  • Cutting and Welding Required During Installation
BMW 740iL 1995
  • Left
  • Right
  • 4L V8 3982CC
  • Cutting and Welding Required During Installation
BMW 840Ci 1994
  • Left
  • Right
  • 4L V8 3982CC
  • Cutting and Welding Required During Installation
BMW 840Ci 1995
  • Left
  • Right
  • 4L V8 3982CC
  • Cutting and Welding Required During Installation
BMW M3 1995
  • 3L L6 2990CC
  • Cutting and Welding Required During Installation
Buick Century 1986
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick Century 1987
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick Century 1988
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick Skylark 1980
  • 2.5L L4 2474CC/151CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Cadillac Cimarron 1985
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Cadillac Cimarron 1986
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet Citation 1980
  • 2.5L L4 2474CC/151CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet Citation 1982
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Chevrolet Citation 1983
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Chevrolet Citation II 1984
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Chevrolet Citation II 1985
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Chevrolet Laguna 1975
  • 6.6L V8 400CID
  • Cutting and Welding Required During Installation
Chevrolet Laguna 1976
  • 6.6L V8 400CID
  • Cutting and Welding Required During Installation
Chrysler Cordoba 1980
  • Rear
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Chrysler Cordoba 1981
  • Rear
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Chrysler Cordoba 1982
  • Rear
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Chrysler Cordoba 1983
  • Rear
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Chrysler E Class 1983
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Chrysler E Class 1984
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Chrysler Executive Limousine 1985
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Chrysler Executive Sedan 1983
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Chrysler Executive Sedan 1984
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Chrysler LeBaron 1980
  • Rear
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Chrysler LeBaron 1981
  • Rear
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Chrysler LeBaron 1982
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Chrysler LeBaron 1983
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Chrysler LeBaron 1984
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Chrysler LeBaron 1985
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Chrysler Newport 1979
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Chrysler New Yorker 1982
  • Rear
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Chrysler New Yorker 1983
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Chrysler New Yorker 1984
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Chrysler New Yorker 1985
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Chrysler Town & Country 1986
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge 400 1982
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Dodge 400 1983
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Dodge 600 1983
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Dodge 600 1984
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Dodge 600 1985
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Dodge Aries 1981
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Dodge Aries 1982
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Dodge Aries 1983
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Dodge Aries 1984
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Dodge Aries 1985
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Dodge Caravan 1984
  • Rear
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Dodge Caravan 1985
  • Rear
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Dodge Caravan 1986
  • Rear
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Dodge Caravan 1987
  • Rear
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Dodge Charger 1976
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Dodge Coronet 1975
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Dodge Coronet 1976
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Dodge D100 1975
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Dodge D100 1976
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Dodge D100 1977
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Dodge D200 1975
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Dodge D200 1976
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Dodge D200 1977
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Dodge D300 1975
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Dodge Diplomat 1980
  • Rear
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Dodge Diplomat 1981
  • Rear
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Dodge Mini Ram 1984
  • Rear
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Dodge Mini Ram 1985
  • Rear
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Dodge Mini Ram 1986
  • Rear
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Dodge Mini Ram 1987
  • Rear
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Dodge Mirada 1980
  • Rear
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Dodge Mirada 1981
  • Rear
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Dodge Mirada 1982
  • Rear
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Dodge Mirada 1983
  • Rear
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Dodge Omni 1978
  • 1.7L L4 105CID
  • Cutting and Welding Required During Installation
Dodge Omni 1979
  • 1.7L L4 105CID
  • Cutting and Welding Required During Installation
Dodge Raider 1989
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge W100 1975
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Dodge W100 1976
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Dodge W100 1977
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Dodge W300 1975
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Fiat 124 1975
  • 1.8L L4 1756CC
  • Cutting and Welding Required During Installation
Fiat 124 1976
  • 1.8L L4 1756CC
  • Cutting and Welding Required During Installation
Fiat 124 1977
  • 1.8L L4 1756CC
  • Cutting and Welding Required During Installation
Fiat 124 1978
  • 1.8L L4 1756CC
  • Cutting and Welding Required During Installation
Fiat 124 1979
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
Fiat 124 1980
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
Fiat 124 1981
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
Fiat 128 1975
  • 1.3L L4 1290CC
  • Cutting and Welding Required During Installation
Fiat 128 1976
  • 1.3L L4 1290CC
  • Cutting and Welding Required During Installation
Fiat 128 1977
  • 1.3L L4 1290CC
  • Cutting and Welding Required During Installation
Fiat 128 1978
  • 1.3L L4 1290CC
  • Cutting and Welding Required During Installation
Fiat 128 1979
  • 1.3L L4 1290CC
  • Cutting and Welding Required During Installation
Fiat 131 1975
  • 1.8L L4 1756CC
  • Cutting and Welding Required During Installation
Fiat 131 1976
  • 1.8L L4 1756CC
  • Cutting and Welding Required During Installation
Fiat 131 1977
  • 1.8L L4 1756CC
  • Cutting and Welding Required During Installation
Fiat 131 1978
  • 1.8L L4 1756CC
  • Cutting and Welding Required During Installation
Fiat Brava 1979
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
Fiat Brava 1980
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
Fiat Brava 1981
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
Fiat Strada 1979
  • 1.5L L4 1498CC
  • Cutting and Welding Required During Installation
Fiat Strada 1980
  • 1.5L L4 1498CC
  • Cutting and Welding Required During Installation
Fiat Strada 1981
  • 1.5L L4 1498CC
  • Cutting and Welding Required During Installation
Fiat Strada 1982
  • 1.5L L4 1498CC
  • Cutting and Welding Required During Installation
Fiat X-1/9 1975
  • 1.3L L4 1290CC
  • Cutting and Welding Required During Installation
Fiat X-1/9 1976
  • 1.3L L4 1290CC
  • Cutting and Welding Required During Installation
Fiat X-1/9 1977
  • 1.3L L4 1290CC
  • Cutting and Welding Required During Installation
Fiat X-1/9 1978
  • 1.3L L4 1290CC
  • Cutting and Welding Required During Installation
Fiat X-1/9 1979
  • 1.5L L4 1498CC
  • Cutting and Welding Required During Installation
Fiat X-1/9 1980
  • 1.5L L4 1498CC
  • Cutting and Welding Required During Installation
Fiat X-1/9 1981
  • 1.5L L4 1498CC
  • Cutting and Welding Required During Installation
Fiat X-1/9 1982
  • 1.5L L4 1498CC
  • Cutting and Welding Required During Installation
Fiat X-1/9 1983
  • 1.5L L4 1498CC
  • Cutting and Welding Required During Installation
Ford Courier 1977
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Ford Courier 1978
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Ford Courier 1979
  • 2L L4 1989CC/122CID
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Ford Courier 1980
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Ford Courier 1981
  • 2L L4 1989CC/122CID
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Ford Courier 1982
  • 2L L4 1989CC/122CID
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Ford F-100 1975
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Ford F-100 1976
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Ford F-100 1977
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Ford F-100 1978
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Ford F-100 1979
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Ford F-150 1975
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Ford F-150 1976
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Ford F-150 1977
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Ford F-150 1978
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Ford F-150 1979
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Ford F-250 1977
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Ford F-250 1978
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Ford Fairmont 1978
  • 5L V8 302CID
  • with 14in. Converter Body
  • Cutting and Welding Required During Installation
Ford Fairmont 1979
  • 5L V8 302CID
  • with 14in. Converter Body
  • Cutting and Welding Required During Installation
Ford Fairmont 1980
  • Rear
  • 4.2L V8 255CID
  • 3.3L L6 200CID
  • Cutting and Welding Required During Installation
Ford Fairmont 1981
  • Rear
  • 3.3L L6 200CID
  • Cutting and Welding Required During Installation
Ford Fairmont 1982
  • Rear
  • 3.3L L6 200CID
  • Cutting and Welding Required During Installation
Ford Fairmont 1983
  • Rear
  • 3.3L L6 200CID
  • Cutting and Welding Required During Installation
Ford Granada 1975
  • 5L V8 302CID
  • 4.1L L6 250CID
  • 5.8L V8 351CID
  • 3.3L L6 200CID
  • Cutting and Welding Required During Installation
Ford Granada 1976
  • 5L V8 302CID
  • 4.1L L6 250CID
  • 5.8L V8 351CID
  • 3.3L L6 200CID
  • Cutting and Welding Required During Installation
Ford Granada 1977
  • 5L V8 302CID
  • 4.1L L6 250CID
  • 5.8L V8 351CID
  • 3.3L L6 200CID
  • Cutting and Welding Required During Installation
Ford Granada 1978
  • 5L V8 302CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Ford Granada 1979
  • 5L V8 302CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Ford Granada 1980
  • Rear
  • 5L V8 302CID
  • 4.1L L6 250CID
  • 4.2L V8 255CID
  • Cutting and Welding Required During Installation
Ford Granada 1981
  • Rear
  • 3.3L L6 200CID
  • Cutting and Welding Required During Installation
Ford Granada 1982
  • Rear
  • 3.3L L6 200CID
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Ford LTD 1979
  • Left
  • Rear Right
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Ford LTD 1980
  • Left
  • Rear Right
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Ford LTD 1983
  • Rear
  • 3.3L L6 200CID
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Ford LTD 1986
  • Left
  • Rear Right
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Ford Maverick 1975
  • 5L V8 302CID
  • 4.1L L6 250CID
  • 3.3L L6 200CID
  • Cutting and Welding Required During Installation
Ford Maverick 1976
  • 5L V8 302CID
  • 4.1L L6 250CID
  • 3.3L L6 200CID
  • Cutting and Welding Required During Installation
Ford Maverick 1977
  • 5L V8 302CID
  • 4.1L L6 250CID
  • 3.3L L6 200CID
  • Cutting and Welding Required During Installation
Ford Mustang 1979
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Ford Mustang 1980
  • Rear
  • 3.3L L6 200CID
  • Cutting and Welding Required During Installation
Ford Mustang 1981
  • Rear
  • 3.3L L6 200CID
  • Cutting and Welding Required During Installation
Ford Mustang 1982
  • Rear
  • 3.3L L6 200CID
  • Cutting and Welding Required During Installation
Ford Mustang 1987
  • Rear
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Ford Mustang 1988
  • Rear
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Ford Mustang 1989
  • Rear
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Ford Mustang 1990
  • Rear
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Ford Mustang 1991
  • Rear
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Ford Mustang 1992
  • Rear
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Ford Mustang 1993
  • Rear
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Ford Mustang II 1975
  • Right
  • Left
  • 2.8L V6 171CID
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Ford Mustang II 1976
  • Right
  • Left
  • 2.8L V6 171CID
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Ford Mustang II 1977
  • 5L V8 302CID
  • 2.8L V6 171CID
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Ford Mustang II 1978
  • 5L V8 302CID
  • 2.8L V6 171CID
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Ford Pinto 1977
  • 2.8L V6 171CID
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Ford Pinto 1978
  • 2.8L V6 171CID
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Ford Pinto 1979
  • 2.8L V6 171CID
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Ford Ranger 1983
  • 2.3L L4 140CID
  • with High Altitude Package
  • Cutting and Welding Required During Installation
Ford Ranger 1984
  • 2.3L L4 140CID
  • with High Altitude Package
  • Cutting and Welding Required During Installation
Ford Ranger 1985
  • 2.3L L4 140CID
  • GAS
  • Cutting and Welding Required During Installation
  • Split Date To: To 01/1986
Ford Ranger 1986
  • 2.3L L4 140CID
  • GAS
  • Cutting and Welding Required During Installation
  • Split Date To: To 01/1986
Jaguar XJS 1976
  • Rear Right
  • Rear Left
  • 5.3L V12 5343CC
  • Cutting and Welding Required During Installation
Jaguar XJS 1977
  • Rear Right
  • Rear Left
  • 5.3L V12 5343CC
  • Cutting and Welding Required During Installation
Jaguar XJS 1978
  • Rear Right
  • Rear Left
  • 5.3L V12 5343CC
  • Cutting and Welding Required During Installation
Jaguar XJS 1979
  • Rear Right
  • Rear Left
  • 5.3L V12 5343CC
  • Cutting and Welding Required During Installation
Jaguar XJS 1980
  • Rear Right
  • Rear Left
  • 5.3L V12 5343CC
  • Cutting and Welding Required During Installation
Jaguar XJS 1981
  • Rear Right
  • Rear Left
  • 5.3L V12 5343CC
  • Cutting and Welding Required During Installation
Jaguar XJS 1982
  • Rear Right
  • Rear Left
  • 5.3L V12 5343CC
  • Cutting and Welding Required During Installation
  • USA
Jaguar XJS 1983
  • Rear Right
  • Rear Left
  • 5.3L V12 5343CC
  • Cutting and Welding Required During Installation
  • USA
Jaguar XJS 1984
  • Rear Right
  • Rear Left
  • 5.3L V12 5343CC
  • Cutting and Welding Required During Installation
  • USA
Jaguar XJS 1985
  • Rear Right
  • Rear Left
  • 5.3L V12 5343CC
  • Cutting and Welding Required During Installation
  • USA
Jaguar XJS 1986
  • Rear Right
  • Rear Left
  • 5.3L V12 5343CC
  • Cutting and Welding Required During Installation
  • USA
Jaguar XJS 1987
  • Rear Right
  • Rear Left
  • 5.3L V12 5343CC
  • Cutting and Welding Required During Installation
  • USA
Jaguar XJS 1988
  • Rear Right
  • Rear Left
  • 5.3L V12 5343CC
  • Cutting and Welding Required During Installation
Jaguar XJS 1989
  • Rear Right
  • Rear Left
  • 5.3L V12 5343CC
  • Cutting and Welding Required During Installation
Jaguar XJS 1990
  • Rear Right
  • Rear Left
  • 5.3L V12 5343CC
  • Cutting and Welding Required During Installation
Jaguar XJS 1991
  • Rear Right
  • Rear Left
  • 5.3L V12 5343CC
  • Cutting and Welding Required During Installation
Jaguar XJS 1992
  • Rear Right
  • Rear Left
  • 5.3L V12 5343CC
  • Cutting and Welding Required During Installation
Jeep Cherokee 1984
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Jeep Cherokee 1985
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Jeep Cherokee 1986
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Jeep Comanche 1986
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Jeep Wagoneer 1984
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Jeep Wagoneer 1985
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Jeep Wagoneer 1986
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Lancia Beta 1976
  • 1.8L L4 1755CC
  • Cutting and Welding Required During Installation
Lancia Beta 1977
  • 1.8L L4 1755CC
  • Cutting and Welding Required During Installation
Lancia Beta 1978
  • 1.8L L4 1755CC
  • Cutting and Welding Required During Installation
Lancia Beta 1979
  • 2L L4 1994CC
  • Cutting and Welding Required During Installation
Lancia Beta 1981
  • 2L L4 1994CC
  • Cutting and Welding Required During Installation
Lancia Zagato 1979
  • 2L L4 1994CC
  • Cutting and Welding Required During Installation
Lancia Zagato 1981
  • 2L L4 1994CC
  • Cutting and Welding Required During Installation
Lancia Zagato 1982
  • 2L L4 1994CC
  • Cutting and Welding Required During Installation
Land Rover Defender 90 1994
  • Right
  • Left
  • 3.9L V8 3950CC
  • Cutting and Welding Required During Installation
Land Rover Defender 90 1995
  • Right
  • Left
  • 3.9L V8 3950CC
  • Cutting and Welding Required During Installation
Land Rover Defender 110 1993
  • Right
  • Left
  • 3.9L V8 3950CC
  • Cutting and Welding Required During Installation
Land Rover Discovery 1994
  • Right
  • Left
  • 3.9L V8 3950CC
  • Cutting and Welding Required During Installation
Land Rover Discovery 1995
  • Right
  • Left
  • 3.9L V8 3950CC
  • Cutting and Welding Required During Installation
Land Rover Range Rover 1987
  • Rear
  • 3.5L V8 3532CC/216CID
  • Cutting and Welding Required During Installation
Land Rover Range Rover 1988
  • Rear
  • 3.5L V8 3532CC/216CID
  • Cutting and Welding Required During Installation
Land Rover Range Rover 1989
  • Left
  • Right
  • 3.9L V8 3947CC
  • Cutting and Welding Required During Installation
Land Rover Range Rover 1990
  • Left
  • Right
  • 3.9L V8 3947CC
  • Cutting and Welding Required During Installation
Land Rover Range Rover 1991
  • Left
  • Right
  • 3.9L V8 3947CC
  • Cutting and Welding Required During Installation
Land Rover Range Rover 1992
  • Left
  • Right
  • 3.9L V8 3947CC
  • Cutting and Welding Required During Installation
Land Rover Range Rover 1993
  • Left
  • Right
  • 3.9L V8 3950CC
  • 4.2L V8 4200CC
  • Cutting and Welding Required During Installation
Land Rover Range Rover 1994
  • Left
  • Right
  • 3.9L V8 3950CC
  • 4.2L V8 4200CC
  • Cutting and Welding Required During Installation
Land Rover Range Rover 1995
  • Left
  • Right
  • 3.9L V8 3950CC
  • 4.2L V8 4200CC
  • Cutting and Welding Required During Installation
Lincoln Continental 1980
  • Left
  • Right
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Lincoln Continental 1986
  • Rear Left
  • Rear Right
  • 5L V8 302CID
  • Dual Exhaust
  • Cutting and Welding Required During Installation
Lincoln Continental 1987
  • Rear Left
  • Rear Right
  • 5L V8 302CID
  • Dual Exhaust
  • Cutting and Welding Required During Installation
Lincoln Town Car 1986
  • Rear Left
  • Rear Right
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Lincoln Town Car 1987
  • Rear Left
  • Rear Right
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Lincoln Town Car 1988
  • Rear Left
  • Rear Right
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Lincoln Town Car 1989
  • Rear Left
  • Rear Right
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Lincoln Town Car 1990
  • Rear Left
  • Rear Right
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Lincoln Versailles 1977
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Lincoln Versailles 1978
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Lincoln Versailles 1979
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Lincoln Versailles 1980
  • Rear
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Lotus Esprit 1977
  • 2L L4 1973CC/120CID
  • Cutting and Welding Required During Installation
Lotus Esprit 1978
  • 2L L4 1973CC/120CID
  • Cutting and Welding Required During Installation
Lotus Esprit 1979
  • 2L L4 1973CC/120CID
  • Cutting and Welding Required During Installation
Maserati Biturbo 1983
  • 2L V6 1996CC
  • Cutting and Welding Required During Installation
Mazda 626 1979
  • 2L L4 1970CC
  • Cutting and Welding Required During Installation
Mazda 626 1980
  • 2L L4 1970CC
  • Cutting and Welding Required During Installation
Mazda 626 1981
  • Rear
  • 2L L4 1970CC
  • Cutting and Welding Required During Installation
Mazda 626 1982
  • Rear
  • 2L L4 1970CC
  • Cutting and Welding Required During Installation
Mazda B1800 1977
  • 1.8L L4 1796CC/110CID
  • Cutting and Welding Required During Installation
Mazda B1800 1978
  • 1.8L L4 1796CC/110CID
  • Cutting and Welding Required During Installation
Mazda B2000 1979
  • 2L L4 1970CC
  • Cutting and Welding Required During Installation
Mazda B2000 1980
  • 2L L4 1970CC
  • Cutting and Welding Required During Installation
Mazda B2000 1981
  • 2L L4 1970CC
  • Cutting and Welding Required During Installation
Mazda B2000 1982
  • 2L L4 1970CC
  • Cutting and Welding Required During Installation
Mazda GLC 1977
  • 1.3L L4 1272CC
  • Cutting and Welding Required During Installation
Mazda GLC 1978
  • 1.3L L4 1272CC
  • Cutting and Welding Required During Installation
Mazda GLC 1979
  • 1.4L L4 1415CC
  • Cutting and Welding Required During Installation
Mazda GLC 1980
  • 1.4L L4 1415CC
  • Cutting and Welding Required During Installation
Mazda Mizer 1976
  • 1.3L L4 1272CC
  • Cutting and Welding Required During Installation
Mazda Mizer 1977
  • 1.3L L4 1272CC
  • Cutting and Welding Required During Installation
Mazda RX-7 1984
  • Front
  • 1.1L R2 1146CC
  • 1.3L R2 1308CC
  • Cutting and Welding Required During Installation
Mazda RX-7 1985
  • Front Forward
  • 1.1L R2 1146CC
  • 1.3L R2 1308CC
  • Cutting and Welding Required During Installation
Mazda RX-7 1993
  • Rear
  • 1.3L R2 1308CC
  • Cutting and Welding Required During Installation
Mazda RX-7 1994
  • Rear
  • 1.3L R2 1308CC
  • Cutting and Welding Required During Installation
Mazda RX-7 1995
  • Rear
  • 1.3L R2 1308CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 190E 1985
  • Rear
  • 2.3L L4 2299CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 190E 1986
  • Front
  • 2.3L L4 2299CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 190E 1987
  • Front
  • 2.3L L4 2299CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 190E 1988
  • Front
  • 2.3L L4 2299CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 190E 1991
  • 2.3L L4 2299CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 190E 1992
  • 2.3L L4 2299CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 190E 1993
  • 2.3L L4 2299CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 280CE 1980
  • Rear
  • 2.8L L6 2746CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 280CE 1981
  • Rear
  • 2.8L L6 2778CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 280E 1980
  • Rear
  • 2.8L L6 2746CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 280E 1981
  • Rear
  • 2.8L L6 2778CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 280SE 1980
  • Rear
  • 2.8L L6 2746CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 380SE 1984
  • Rear
  • 3.8L V8 3839CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 380SE 1985
  • Rear
  • 3.8L V8 3839CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 380SEC 1982
  • Rear
  • 3.8L V8 3839CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 380SEC 1983
  • Rear
  • 3.8L V8 3839CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 380SEL 1981
  • Rear
  • 3.8L V8 3839CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 380SEL 1982
  • Rear
  • 3.8L V8 3839CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 380SEL 1983
  • Rear
  • 3.8L V8 3839CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 380SL 1981
  • Rear
  • 3.8L V8 3839CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 380SL 1982
  • Rear
  • 3.8L V8 3839CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 380SL 1983
  • Rear
  • 3.8L V8 3839CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 380SL 1984
  • Rear
  • 3.8L V8 3839CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 380SL 1985
  • Rear
  • 3.8L V8 3839CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 380SLC 1981
  • Rear
  • 3.8L V8 3839CC
  • Cutting and Welding Required During Installation
Mercedes-Benz E420 1994
  • Right
  • Left
  • 4.2L V8 4196CC
  • Cutting and Welding Required During Installation
Mercedes-Benz E420 1995
  • Left
  • Right
  • 4.2L V8 4196CC
  • Cutting and Welding Required During Installation
Mercury Bobcat 1977
  • 2.8L V6 171CID
  • 2.3L L4 140CID
  • 7-1/4in. Converter Body
  • Cutting and Welding Required During Installation
  • 12in. Converter Body
Mercury Bobcat 1978
  • 2.8L V6 171CID
  • 2.3L L4 140CID
  • 7-1/4in. Converter Body
  • Cutting and Welding Required During Installation
  • 12in. Converter Body
Mercury Bobcat 1979
  • 2.8L V6 171CID
  • 2.3L L4 140CID
  • 7-1/4in. Converter Body
  • Cutting and Welding Required During Installation
  • 12in. Converter Body
Mercury Capri 1976
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Mercury Capri 1977
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Mercury Capri 1979
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Mercury Capri 1980
  • Rear
  • 4.2L V8 255CID
  • 3.3L L6 200CID
  • Cutting and Welding Required During Installation
Mercury Capri 1981
  • Rear
  • 3.3L L6 200CID
  • Cutting and Welding Required During Installation
Mercury Capri 1982
  • Rear
  • 3.3L L6 200CID
  • Cutting and Welding Required During Installation
Mercury Colony Park 1987
  • Rear
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Mercury Colony Park 1988
  • Rear
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Mercury Colony Park 1989
  • Rear
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Mercury Colony Park 1990
  • Rear
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Mercury Colony Park 1991
  • Rear
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Mercury Comet 1977
  • 5L V8 302CID
  • 4.1L L6 250CID
  • 3.3L L6 200CID
  • Cutting and Welding Required During Installation
Mercury Cougar 1980
  • Rear
  • 5L V8 302CID
  • 4.2L V8 255CID
  • 3.3L L6 200CID
  • Cutting and Welding Required During Installation
Mercury Cougar 1981
  • 3.3L L6 200CID
  • Cutting and Welding Required During Installation
Mercury Cougar 1982
  • 3.3L L6 200CID
  • Cutting and Welding Required During Installation
Mercury Grand Marquis 1979
  • Rear
  • Left
  • Right
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Mercury Grand Marquis 1980
  • Rear
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Mercury Grand Marquis 1984
  • Rear
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Mercury Grand Marquis 1985
  • Rear
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Mercury Grand Marquis 1986
  • Rear
  • Left
  • Right
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Mercury Grand Marquis 1987
  • Left
  • Right
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Mercury Grand Marquis 1988
  • Left
  • Right
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Mercury Grand Marquis 1989
  • Left
  • Right
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Mercury Grand Marquis 1990
  • Left
  • Right
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Mercury Grand Marquis 1991
  • Left
  • Right
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Mercury Grand Marquis 1992
  • Left
  • Right
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Mercury Grand Marquis 1993
  • Left
  • Right
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Mercury Grand Marquis 1994
  • Left
  • Right
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Mercury Marquis 1979
  • Rear
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Mercury Marquis 1980
  • Rear
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Mercury Marquis 1983
  • Rear
  • 3.3L L6 200CID
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Mercury Monarch 1975
  • 5L V8 302CID
  • 4.1L L6 250CID
  • 5.8L V8 351CID
  • 3.3L L6 200CID
  • Cutting and Welding Required During Installation
Mercury Monarch 1976
  • 5L V8 302CID
  • 4.1L L6 250CID
  • 5.8L V8 351CID
  • 3.3L L6 200CID
  • Cutting and Welding Required During Installation
Mercury Monarch 1977
  • 5L V8 302CID
  • 4.1L L6 250CID
  • 5.8L V8 351CID
  • 3.3L L6 200CID
  • Cutting and Welding Required During Installation
Mercury Monarch 1978
  • 5L V8 302CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Mercury Monarch 1979
  • 5L V8 302CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Mercury Monarch 1980
  • Rear
  • 5L V8 302CID
  • 4.1L L6 250CID
  • 4.2L V8 255CID
  • Cutting and Welding Required During Installation
Mercury Zephyr 1978
  • 5L V8 302CID
  • 2.3L L4 140CID
  • with 14in. Converter Body
  • Cutting and Welding Required During Installation
Mercury Zephyr 1979
  • 5L V8 302CID
  • 2.3L L4 140CID
  • with 14in. Converter Body
  • Cutting and Welding Required During Installation
Mercury Zephyr 1980
  • Rear
  • 4.2L V8 255CID
  • 3.3L L6 200CID
  • Cutting and Welding Required During Installation
Mercury Zephyr 1981
  • Rear
  • 3.3L L6 200CID
  • Cutting and Welding Required During Installation
Mercury Zephyr 1982
  • Rear
  • 3.3L L6 200CID
  • Cutting and Welding Required During Installation
Mercury Zephyr 1983
  • Rear
  • 3.3L L6 200CID
  • Cutting and Welding Required During Installation
Mitsubishi Montero 1983
  • Rear
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Mitsubishi Montero 1984
  • Rear
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Mitsubishi Montero 1985
  • Rear
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Mitsubishi Montero 1986
  • Rear
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Mitsubishi Montero 1994
  • Rear
  • 3.5L V6 3497CC/215CID
  • Cutting and Welding Required During Installation
Mitsubishi Montero 1995
  • Rear
  • 3.5L V6 3497CC/215CID
  • Cutting and Welding Required During Installation
Nissan F10 1976
  • 1.4L L4 1393CC/85cCID
  • Cutting and Welding Required During Installation
Nissan F10 1977
  • 1.4L L4 1393CC/85cCID
  • Cutting and Welding Required During Installation
Nissan F10 1978
  • 1.4L L4 1393CC/85cCID
  • Cutting and Welding Required During Installation
Nissan Pulsar 1983
  • Rear
  • 1.6L L4 1597CC/97cCID
  • Cutting and Welding Required During Installation
Nissan Pulsar NX 1983
  • Rear
  • 1.6L L4 1597CC/97cCID
  • Cutting and Welding Required During Installation
Nissan Pulsar NX 1984
  • Rear
  • 1.6L L4 1597CC/97cCID
  • Cutting and Welding Required During Installation
Nissan Pulsar NX 1985
  • Rear
  • 1.6L L4 1597CC/97cCID
  • Cutting and Welding Required During Installation
Nissan Pulsar NX 1986
  • Rear
  • 1.6L L4 1597CC/97cCID
  • Cutting and Welding Required During Installation
Nissan Sentra 1983
  • Rear
  • 1.6L L4 1597CC/97cCID
  • Cutting and Welding Required During Installation
Nissan Sentra 1984
  • Rear
  • 1.6L L4 1597CC/97cCID
  • Cutting and Welding Required During Installation
Nissan Sentra 1985
  • Rear
  • 1.6L L4 1597CC/97cCID
  • Cutting and Welding Required During Installation
Nissan Sentra 1986
  • Rear
  • 1.6L L4 1597CC/97cCID
  • Cutting and Welding Required During Installation
Oldsmobile Omega 1980
  • 2.5L L4 2474CC/151CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Peugeot 505 1987
  • 2.8L V6 2849CC
  • Cutting and Welding Required During Installation
Peugeot 505 1988
  • 2.8L V6 2849CC
  • Cutting and Welding Required During Installation
Peugeot 505 1989
  • 2.8L V6 2849CC
  • Cutting and Welding Required During Installation
Plymouth Arrow 1978
  • 1.6L L4 1597CC/98cCID
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
Plymouth Arrow 1979
  • 1.6L L4 1597CC/98cCID
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Plymouth Caravelle 1978
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
  • CAN
Plymouth Caravelle 1979
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
  • CAN
Plymouth Caravelle 1980
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
  • CAN
Plymouth Caravelle 1983
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
  • CAN
Plymouth Caravelle 1984
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
  • CAN
Plymouth Caravelle 1985
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Plymouth Duster 1976
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Plymouth Gran Fury 1980
  • Rear
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Plymouth Gran Fury 1981
  • Rear
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Plymouth Horizon 1978
  • 1.7L L4 105CID
  • Cutting and Welding Required During Installation
Plymouth Horizon 1979
  • 1.7L L4 105CID
  • Cutting and Welding Required During Installation
Plymouth Reliant 1981
  • Front
  • 2.2L L4 135CID
  • 2.6L L4 2555CC/156CID
  • 2 Converters
  • Cutting and Welding Required During Installation
Plymouth Reliant 1982
  • Front
  • 2.2L L4 135CID
  • 2.6L L4 2555CC/156CID
  • 2 Converters
  • Cutting and Welding Required During Installation
Plymouth Reliant 1983
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Plymouth Reliant 1984
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Plymouth Reliant 1985
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Plymouth Valiant 1975
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Plymouth Valiant 1976
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Plymouth Voyager 1984
  • Rear
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Plymouth Voyager 1985
  • Rear
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Plymouth Voyager 1987
  • Rear
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Pontiac Phoenix 1980
  • 2.5L L4 2474CC/151CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Pontiac Phoenix 1982
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Pontiac Phoenix 1983
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Pontiac Phoenix 1984
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Renault R12 1975
  • 1.6L L4 1647CC/100CID
  • Cutting and Welding Required During Installation
Renault R12 1976
  • 1.6L L4 1647CC/100CID
  • Cutting and Welding Required During Installation
Renault R12 1977
  • 1.6L L4 1647CC/100CID
  • Cutting and Welding Required During Installation
Renault R15 1975
  • 1.6L L4 1647CC/100CID
  • Cutting and Welding Required During Installation
Renault R15 1976
  • 1.6L L4 1647CC/100CID
  • Cutting and Welding Required During Installation
Renault R17 1975
  • 1.6L L4 1647CC
  • Cutting and Welding Required During Installation
Renault R17 1976
  • 1.6L L4 1647CC/100CID
  • Cutting and Welding Required During Installation
Renault R17 1977
  • 1.6L L4 1647CC/100CID
  • Cutting and Welding Required During Installation
Renault R17 1978
  • 1.6L L4 1647CC/100CID
  • Cutting and Welding Required During Installation
Renault R17 1979
  • 1.6L L4 1647CC/100CID
  • Cutting and Welding Required During Installation
Subaru Brat 1982
  • Rear
  • 1.8L H4 1781CC
  • Cutting and Welding Required During Installation
Subaru Brat 1983
  • Rear
  • 1.8L H4 1781CC
  • Cutting and Welding Required During Installation
Subaru Brat 1984
  • Rear
  • 1.8L H4 1781CC
  • Cutting and Welding Required During Installation
Subaru Brat 1985
  • Rear
  • 1.8L H4 1781CC
  • Cutting and Welding Required During Installation
Subaru Brat 1986
  • Rear
  • 1.8L H4 1781CC
  • Cutting and Welding Required During Installation
Subaru Brat 1987
  • Rear
  • 1.8L H4 1781CC
  • Cutting and Welding Required During Installation
Subaru DL 1983
  • Rear
  • 1.6L H4 1595CC
  • Cutting and Welding Required During Installation
Subaru DL 1984
  • Rear
  • 1.6L H4 1595CC
  • Cutting and Welding Required During Installation
Subaru GL 1986
  • Rear
  • Hatchback
  • Coupe
  • Wagon
  • 1.6L H4 1595CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Subaru GL 1987
  • Rear
  • Hatchback
  • Coupe
  • Wagon
  • 1.6L H4 1595CC
  • Cutting and Welding Required During Installation
Subaru RX 1986
  • 1.8L H4 1781CC
  • Cutting and Welding Required During Installation
Subaru RX 1987
  • 1.8L H4 1781CC
  • Cutting and Welding Required During Installation
Subaru RX 1988
  • 1.8L H4 1781CC
  • Cutting and Welding Required During Installation
Subaru RX 1989
  • 1.8L H4 1781CC
  • Cutting and Welding Required During Installation
Subaru Standard 1983
  • Rear
  • 1.6L H4 1595CC
  • Cutting and Welding Required During Installation
Subaru Standard 1984
  • Rear
  • 1.6L H4 1595CC
  • Cutting and Welding Required During Installation
Subaru Standard 1985
  • Rear
  • 1.6L H4 1595CC
  • Cutting and Welding Required During Installation
Subaru Standard 1986
  • Rear
  • 1.6L H4 1595CC
  • Cutting and Welding Required During Installation
Subaru Standard 1987
  • Rear
  • 1.6L H4 1595CC
  • 1.8L H4 1781CC
  • Cutting and Welding Required During Installation
  • CAN
Toyota Land Cruiser 1993
  • Left
  • Right
  • 4.5L L6 4477CC
  • Cutting and Welding Required During Installation
Toyota Land Cruiser 1994
  • Left
  • Right
  • 4.5L L6 4477CC
  • Cutting and Welding Required During Installation