100% CANADIAN BASED 100% CANADIAN
NO DUTIES OR CUSTOMS FEES NO CUSTOMS FEES
AUTHORIZED DEALER AUTH. DEALER
30-DAY HASSLE-FREE RETURNS 30-DAY RETURNS

MagnaFlowStainless Federal Catalytic Converter without Sensor Ports (2.5" IN\/2.5" OUT)

AUTHORIZED DEALER

94006

Manufacturer Part Number
*Images are for illustrative purpose only. Actual Product may differ.
SKU: MAG-94006
Please select a vehicle to verify fitment.

Please Select a Vehicle

This will be used to show you compatible parts.

Auto Parts Finder

This product doesn't fit your selection!

The product shown on this page is not compatible with the selected vehicle

!
To ensure proper parts fitment, please browse compatible products or change your selection.


Change Current Selection
FREE Shipping*
Standard Warranty

Pedido Especial
1-3 Semanas
CA $163.00
Stainless Federal Catalytic Converter without Sensor Ports (2.5" IN\/2.5" OUT) is available to buy in increments of 1
AUTHORIZED DEALER

94006

Manufacturer Part Number
More Information
Fabricante MagnaFlow
Número de Pieza del Fabricante 94006
Precio de Venta Sugerido por el Fabricante (MSRP) 114.76
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
This table represents all the 996 compatible vehicles for this part:
Make Model Year
Application Notes
Position Submodel Drive Type Engine Aspiration Additional Information
Buick Apollo 1975
  • 4.1L L6 250CID
  • 4.3L V8 260CID
  • 5.7L V8 5733CC/350CID
  • Cutting and Welding Required During Installation
Buick Century 1975
  • 3.8L V6 231CID
  • 5.7L V8 5733CC/350CID
  • Cutting and Welding Required During Installation
Buick Century 1976
  • 3.8L V6 231CID
  • 5.7L V8 5733CC/350CID
  • Cutting and Welding Required During Installation
Buick Century 1977
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 3.8L V6 231CID
  • 5.7L V8 5733CC/350CID
  • Cutting and Welding Required During Installation
Buick Century 1978
  • 5.7L V8 350CID
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
  • H
  • 4BBL
Buick Century 1979
  • Sport
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 3.8L V6 3800CC/231CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Buick Century 1980
  • 3.8L V6 3800CC/231CID
  • 4.9L V8 301CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Buick Electra 1977
  • 5.7L V8 350CID
  • 5.7L V8 5733CC/350CID
  • Cutting and Welding Required During Installation
Buick Electra 1978
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Buick Electra 1979
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Buick Electra 1980
  • 4.9L V8 301CID
  • 4.1L V6 252CID
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
  • X
Buick Estate Wagon 1980
  • 4.9L V8 301CID
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
  • X
Buick LeSabre 1975
  • 5.7L V8 5733CC/350CID
  • Cutting and Welding Required During Installation
Buick LeSabre 1976
  • 3.8L V6 231CID
  • 5.7L V8 5733CC/350CID
  • Cutting and Welding Required During Installation
Buick LeSabre 1977
  • 3.8L V6 231CID
  • 5.7L V8 350CID
  • 5.7L V8 5733CC/350CID
  • 3.8L V6 3800CC/231CID
  • 4.9L V8 301CID
  • Cutting and Welding Required During Installation
Buick LeSabre 1978
  • 5L V8 305CID
  • 5.7L V8 350CID
  • 3.8L V6 3800CC/231CID
  • 4.9L V8 301CID
  • Naturally Aspirated
  • Turbocharged
  • Cutting and Welding Required During Installation
Buick LeSabre 1979
  • 5.7L V8 350CID
  • 3.8L V6 3800CC/231CID
  • 4.9L V8 301CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Buick LeSabre 1980
  • 3.8L V6 3800CC/231CID
  • 4.9L V8 301CID
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
  • X
Buick Regal 1975
  • 3.8L V6 231CID
  • 5.7L V8 5733CC/350CID
  • Cutting and Welding Required During Installation
Buick Regal 1976
  • 3.8L V6 231CID
  • 5.7L V8 5733CC/350CID
  • Cutting and Welding Required During Installation
Buick Regal 1977
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 3.8L V6 231CID
  • 5.7L V8 5733CC/350CID
  • Cutting and Welding Required During Installation
Buick Regal 1978
  • Sport
  • 5L V8 305CID
  • 3.8L V6 3800CC/231CID
  • H
  • 4BBL
  • Cutting and Welding Required During Installation
Buick Regal 1979
  • 5L V8 305CID
  • 3.8L V6 3800CC/231CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Buick Regal 1980
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick Regal 1981
  • 4.4L V8 267CID
  • Cutting and Welding Required During Installation
  • CAN
Buick Regal 1982
  • 4.4L V8 267CID
  • Cutting and Welding Required During Installation
  • CAN
Buick Riviera 1977
  • 5.7L V8 350CID
  • 5.7L V8 5733CC/350CID
  • Cutting and Welding Required During Installation
Buick Riviera 1978
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Buick Riviera 1979
  • 5.7L V8 350CID
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick Riviera 1980
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick Riviera 1985
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick Skyhawk 1975
  • 3.8L V6 231CID
  • Cutting and Welding Required During Installation
Buick Skyhawk 1976
  • 3.8L V6 231CID
  • Cutting and Welding Required During Installation
Buick Skyhawk 1977
  • 3.8L V6 231CID
  • Cutting and Welding Required During Installation
Buick Skyhawk 1978
  • 3.8L V6 231CID
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick Skyhawk 1979
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick Skyhawk 1980
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick Skylark 1975
  • 3.8L V6 231CID
  • 4.3L V8 260CID
  • 5.7L V8 5733CC/350CID
  • Cutting and Welding Required During Installation
Buick Skylark 1976
  • 3.8L V6 231CID
  • 4.3L V8 260CID
  • 5.7L V8 5733CC/350CID
  • Cutting and Welding Required During Installation
Buick Skylark 1977
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 3.8L V6 231CID
  • 4.9L V8 301CID
  • Cutting and Welding Required During Installation
Buick Skylark 1978
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick Skylark 1979
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Cadillac Allante 1993
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Cadillac DeVille 1980
  • 4.1L V6 252CID
  • Cutting and Welding Required During Installation
Cadillac DeVille 1994
  • 4.9L V8 300CID
  • Cutting and Welding Required During Installation
Cadillac DeVille 1995
  • 4.9L V8 300CID
  • Cutting and Welding Required During Installation
Cadillac Eldorado 1991
  • 4.9L V8 300CID
  • Cutting and Welding Required During Installation
Cadillac Eldorado 1992
  • 4.9L V8 300CID
  • Cutting and Welding Required During Installation
Cadillac Eldorado 1993
  • 4.6L V8 281CID
  • 4.9L V8 300CID
  • Cutting and Welding Required During Installation
Cadillac Eldorado 1994
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Cadillac Eldorado 1995
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Cadillac Seville 1976
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Cadillac Seville 1977
  • 5.7L V8 350CID
  • Early Models with 2-1/4in. Inlet
  • Cutting and Welding Required During Installation
  • Late Models with 2-1/2in. Inlet
Cadillac Seville 1991
  • 4.9L V8 300CID
  • Cutting and Welding Required During Installation
Cadillac Seville 1992
  • 4.9L V8 300CID
  • Cutting and Welding Required During Installation
Cadillac Seville 1993
  • 4.6L V8 281CID
  • 4.9L V8 300CID
  • Cutting and Welding Required During Installation
Cadillac Seville 1994
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Cadillac Seville 1995
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Checker Marathon 1975
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Checker Marathon 1976
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Checker Marathon 1977
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Checker Marathon 1978
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Checker Marathon 1979
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Checker Marathon 1980
  • 3.8L V6 229CID
  • 4.4L V8 267CID
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Checker Marathon 1981
  • 4.4L V8 267CID
  • Cutting and Welding Required During Installation
Checker Marathon 1982
  • 4.4L V8 267CID
  • Cutting and Welding Required During Installation
Chevrolet Astro 1985
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet Astro 1986
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet Astro 1987
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet Astro 1988
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet Astro 1989
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet Astro 1990
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet Astro 1991
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet Astro 1992
  • 4.3L V6 262CID
  • Z
  • Cutting and Welding Required During Installation
Chevrolet Bel Air 1975
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet Blazer 1987
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
Chevrolet Blazer 1995
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet C10 Suburban 1975
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet C10 Suburban 1976
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet C10 Suburban 1977
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet C10 Suburban 1978
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet C10 Suburban 1979
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet C10 Suburban 1980
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet C10 Suburban 1981
  • 5.7L V8 350CID
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
Chevrolet C10 Suburban 1982
  • 5.7L V8 350CID
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
Chevrolet C10 Suburban 1983
  • 5.7L V8 350CID
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
Chevrolet C10 Suburban 1984
  • 5.7L V8 350CID
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
Chevrolet C10 Suburban 1985
  • 5.7L V8 350CID
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
Chevrolet C10 Suburban 1986
  • 5.7L V8 350CID
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
Chevrolet C20 Suburban 1975
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet C20 Suburban 1976
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet C20 Suburban 1977
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet C20 Suburban 1978
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet C20 Suburban 1979
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet C20 Suburban 1980
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet C20 Suburban 1981
  • 5.7L V8 350CID
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
Chevrolet C20 Suburban 1982
  • 5.7L V8 350CID
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
Chevrolet C20 Suburban 1983
  • 5.7L V8 350CID
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
Chevrolet C20 Suburban 1984
  • 5.7L V8 350CID
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
Chevrolet C20 Suburban 1985
  • 5.7L V8 350CID
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
Chevrolet C20 Suburban 1986
  • 5.7L V8 350CID
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
Chevrolet C10 1975
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet C10 1976
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet C10 1977
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet C10 1978
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet C10 1979
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet C10 1980
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • GAS
  • Cutting and Welding Required During Installation
Chevrolet C10 1981
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet C10 1982
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet C10 1983
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet C10 1984
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet C10 1985
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet C10 1986
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet C20 1975
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet C20 1976
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet C20 1977
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet C20 1978
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet C20 1979
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet C20 1980
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet C20 1981
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet C20 1982
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet C20 1983
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet C20 1984
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet C20 1985
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet C20 1986
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet C1500 1988
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet C1500 1989
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet C1500 1990
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet C1500 1991
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet C1500 1992
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet C1500 1993
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.3L V6 262CID
  • with Y-Pipe Converter
  • Cutting and Welding Required During Installation
  • without Y-Pipe Converter
Chevrolet C2500 1988
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet C2500 1989
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet C2500 1990
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
  • To 8,500lbs. Gross Vehicle Weight
Chevrolet C2500 1991
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
  • To 8,500lbs. Gross Vehicle Weight
Chevrolet C2500 1992
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
  • To 8,500lbs. Gross Vehicle Weight
Chevrolet C2500 1993
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
  • To 8,500lbs. Gross Vehicle Weight
Chevrolet Camaro 1975
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet Camaro 1976
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet Camaro 1977
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet Camaro 1978
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet Camaro 1979
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet Camaro 1980
  • Base
  • Berlinetta
  • Rally Sport
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
  • A
Chevrolet Caprice 1975
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet Caprice 1976
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet Caprice 1977
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet Caprice 1978
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet Caprice 1979
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet Caprice 1980
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.4L V8 267CID
  • GAS
  • Cutting and Welding Required During Installation
Chevrolet Chevette 1976
  • 1.6L L4 98cCID
  • 1.4L L4 1393CC/85cCID
  • Cutting and Welding Required During Installation
Chevrolet Chevette 1977
  • 1.6L L4 98cCID
  • 1.4L L4 1393CC/85cCID
  • Cutting and Welding Required During Installation
Chevrolet Chevette 1978
  • 1.6L L4 98cCID
  • Cutting and Welding Required During Installation
Chevrolet Chevette 1979
  • 1.6L L4 98cCID
  • Cutting and Welding Required During Installation
Chevrolet Chevette 1980
  • 1.6L L4 98cCID
  • Cutting and Welding Required During Installation
Chevrolet Corvette 1975
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet Corvette 1976
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet Corvette 1977
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet Corvette 1978
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet Corvette 1979
  • 5.7L V8 350CID
  • 5.7L V8 5733CC/350CID
  • Cutting and Welding Required During Installation
Chevrolet Corvette 1980
  • 5.7L V8 350CID
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
Chevrolet Corvette 1981
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet Corvette 1986
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet Corvette 1987
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet Corvette 1988
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet Corvette 1989
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet Corvette 1990
  • Right
  • Left
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet Corvette 1991
  • Right
  • Left
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet El Camino 1975
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet El Camino 1976
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet El Camino 1977
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet El Camino 1978
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet El Camino 1979
  • 5.7L V8 350CID
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
Chevrolet G10 1975
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet G10 1976
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet G10 1977
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet G10 1978
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet G10 1979
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet G10 1980
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet G10 1981
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet G10 1982
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet G10 1983
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet G10 1984
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet G10 1985
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet G10 1986
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet G10 1987
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet G10 1988
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet G10 1989
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet G10 1990
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet G10 1991
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet G10 1992
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet G10 1993
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet G10 1994
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet G20 1975
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet G20 1976
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet G20 1977
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet G20 1978
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet G20 1979
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet G20 1980
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet G20 1981
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet G20 1982
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet G20 1983
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet G20 1984
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet G20 1985
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet G20 1986
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet G20 1987
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet G20 1988
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet G20 1989
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet G20 1990
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet G20 1991
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet G20 1992
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet G20 1993
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet G20 1994
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet G30 1978
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet G30 1979
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet G30 1980
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet G30 1981
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet G30 1982
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet G30 1983
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet G30 1984
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet G30 1985
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet G30 1986
  • 5.7L V8 350CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet G30 1987
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet G30 1988
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet G30 1989
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet G30 1990
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet G30 1991
  • 4.3L V6 262CID
  • To 8,600lbs. Gross Vehicle Weight
  • Cutting and Welding Required During Installation
Chevrolet G30 1992
  • 4.3L V6 262CID
  • To 8,600lbs. Gross Vehicle Weight
  • Cutting and Welding Required During Installation
Chevrolet G30 1993
  • 4.3L V6 262CID
  • To 8,600lbs. Gross Vehicle Weight
  • Cutting and Welding Required During Installation
Chevrolet G30 1994
  • 4.3L V6 262CID
  • To 8,600lbs. Gross Vehicle Weight
  • Cutting and Welding Required During Installation
Chevrolet Impala 1975
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet Impala 1976
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet Impala 1977
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet Impala 1978
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet Impala 1979
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet Impala 1980
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.4L V8 267CID
  • GAS
  • Cutting and Welding Required During Installation
Chevrolet K5 Blazer 1975
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet K5 Blazer 1976
  • Left
  • Right
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
  • Single Exhaust
  • Dual Exhaust
Chevrolet K5 Blazer 1977
  • Left
  • Right
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
  • Single Exhaust
  • Dual Exhaust
Chevrolet K5 Blazer 1978
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet K5 Blazer 1979
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet K5 Blazer 1980
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet K5 Blazer 1981
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet K5 Blazer 1982
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet K5 Blazer 1983
  • 5.7L V8 350CID
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
Chevrolet K5 Blazer 1984
  • 5.7L V8 350CID
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
Chevrolet K5 Blazer 1985
  • 5.7L V8 350CID
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
Chevrolet K5 Blazer 1986
  • 5.7L V8 350CID
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
Chevrolet K10 Suburban 1975
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet K10 Suburban 1976
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet K10 Suburban 1977
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet K10 Suburban 1978
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet K10 Suburban 1979
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet K10 Suburban 1980
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet K10 Suburban 1981
  • 5.7L V8 350CID
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
Chevrolet K10 Suburban 1982
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet K10 Suburban 1983
  • 5.7L V8 350CID
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
Chevrolet K10 Suburban 1984
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet K10 Suburban 1985
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet K10 Suburban 1986
  • 5.7L V8 350CID
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
Chevrolet K20 Suburban 1975
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet K20 Suburban 1976
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet K20 Suburban 1977
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet K20 Suburban 1978
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet K20 Suburban 1979
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet K20 Suburban 1980
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet K20 Suburban 1981
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet K20 Suburban 1982
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet K20 Suburban 1983
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet K20 Suburban 1984
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet K20 Suburban 1985
  • 5.7L V8 350CID
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
Chevrolet K20 Suburban 1986
  • 5.7L V8 350CID
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
Chevrolet K10 1975
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet K10 1976
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
  • Single Exhaust
  • Dual Exhaust
  • Right
  • Left
Chevrolet K10 1977
  • Left
  • Right
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
  • Dual Exhaust
  • Single Exhaust
  • Left
  • Right
Chevrolet K10 1978
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
  • Single Exhaust
  • Dual Exhaust
  • Left
  • Right
Chevrolet K10 1979
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet K10 1980
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet K10 1981
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet K10 1982
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet K10 1983
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet K10 1984
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet K10 1985
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet K10 1986
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet K20 1975
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet K20 1976
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet K20 1977
  • 5.7L V8 350CID
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
Chevrolet K20 1978
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet K20 1979
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet K20 1980
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet K20 1981
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet K20 1982
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet K20 1983
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet K20 1984
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet K20 1985
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet K20 1986
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet K1500 1988
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet K1500 1989
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet K1500 1990
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet K1500 1991
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet K1500 1992
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet K1500 1993
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.3L V6 262CID
  • with Y-Pipe Converter
  • Cutting and Welding Required During Installation
  • without Y-Pipe Converter
Chevrolet K2500 1988
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet K2500 1989
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet K2500 1990
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
  • To 8,500lbs. Gross Vehicle Weight
Chevrolet K2500 1991
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
  • To 8,500lbs. Gross Vehicle Weight
Chevrolet K2500 1992
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
  • To 8,500lbs. Gross Vehicle Weight
Chevrolet K2500 1993
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
  • To 8,500lbs. Gross Vehicle Weight
Chevrolet Laguna 1975
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet Laguna 1976
  • 5.7L V8 350CID
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
Chevrolet LUV 1975
  • 1.8L L4 111CID
  • Cutting and Welding Required During Installation
Chevrolet LUV 1976
  • 1.8L L4 111CID
  • Cutting and Welding Required During Installation
Chevrolet LUV 1977
  • 1.8L L4 111CID
  • Cutting and Welding Required During Installation
Chevrolet LUV 1978
  • 1.8L L4 111CID
  • Cutting and Welding Required During Installation
Chevrolet LUV 1979
  • 1.8L L4 111CID
  • Cutting and Welding Required During Installation
Chevrolet LUV 1980
  • 1.8L L4 111CID
  • Cutting and Welding Required During Installation
Chevrolet LUV 1981
  • 1.8L L4 111CID
  • Cutting and Welding Required During Installation
Chevrolet LUV 1982
  • 1.8L L4 111CID
  • Cutting and Welding Required During Installation
Chevrolet Malibu 1975
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet Malibu 1976
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet Malibu 1977
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet Malibu 1978
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet Malibu 1979
  • 5.7L V8 350CID
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
Chevrolet Malibu 1980
  • 5L V8 305CID
  • 4.4L V8 267CID
  • Cutting and Welding Required During Installation
Chevrolet Monte Carlo 1975
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet Monte Carlo 1976
  • 5.7L V8 350CID
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
Chevrolet Monte Carlo 1977
  • 5.7L V8 350CID
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
Chevrolet Monte Carlo 1979
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
Chevrolet Monte Carlo 1980
  • 5L V8 305CID
  • 4.4L V8 267CID
  • 3.8L V6 3800CC/231CID
  • Turbocharged
  • Cutting and Welding Required During Installation
  • 3
Chevrolet Monza 1975
  • 2.3L L4 2294CC/140CID
  • 4.3L V8 262CID
  • Cutting and Welding Required During Installation
Chevrolet Monza 1976
  • 5L V8 305CID
  • 2.3L L4 2294CC/140CID
  • 4.3L V8 262CID
  • Cutting and Welding Required During Installation
Chevrolet Monza 1977
  • 5L V8 305CID
  • 2.3L L4 2294CC/140CID
  • Cutting and Welding Required During Installation
Chevrolet Monza 1978
  • 5L V8 305CID
  • 3.8L V6 3800CC/231CID
  • 3.2L V6 196CID
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Chevrolet Monza 1979
  • 5L V8 305CID
  • 3.8L V6 231CID
  • 3.8L V6 3800CC/231CID
  • 3.2L V6 196CID
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Chevrolet Monza 1980
  • 3.8L V6 3800CC/231CID
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Chevrolet Nova 1975
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • 4.3L V8 262CID
  • Cutting and Welding Required During Installation
Chevrolet Nova 1976
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet Nova 1977
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet Nova 1978
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet Nova 1979
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
Chevrolet R10 Suburban 1987
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
Chevrolet R10 1987
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet R20 1987
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet S10 Blazer 1988
  • 4.3L V6 262CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet S10 Blazer 1989
  • 4.3L V6 262CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet S10 Blazer 1990
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet S10 Blazer 1991
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet S10 Blazer 1992
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet S10 Blazer 1993
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet S10 Blazer 1994
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet S10 1988
  • 4.3L V6 262CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet S10 1989
  • 4.3L V6 262CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet S10 1990
  • 4.3L V6 262CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet S10 1991
  • 4.3L V6 262CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet S10 1992
  • 4.3L V6 262CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet S10 1993
  • 4.3L V6 262CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet S10 1994
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet S10 1995
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet V10 1987
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet Vega 1975
  • 2.3L L4 2294CC/140CID
  • Cutting and Welding Required During Installation
Chevrolet Vega 1976
  • 2.3L L4 2294CC/140CID
  • 2L L4 122CID
  • Cutting and Welding Required During Installation
Chevrolet Vega 1977
  • 2.3L L4 2294CC/140CID
  • Cutting and Welding Required During Installation
Chrysler Newport 1975
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Chrysler Newport 1976
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Chrysler Newport 1977
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Chrysler Newport 1978
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge B100 1975
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Dodge B100 1976
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge B100 1977
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge B100 1978
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge B100 1979
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Dodge B100 1980
  • Center
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Dodge B150 1981
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Dodge B150 1982
  • Rear
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Dodge B150 1983
  • Rear
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Dodge B150 1984
  • Rear
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Dodge B150 1985
  • Rear
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Dodge B150 1986
  • Rear
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Dodge B150 1987
  • Rear
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Dodge B200 1975
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge B200 1976
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge B200 1977
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge B200 1978
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge B200 1979
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge B200 1980
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge B250 1981
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge B250 1982
  • Rear
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Dodge B250 1983
  • Rear
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Dodge B250 1984
  • Rear
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Dodge B250 1985
  • Rear
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Dodge B250 1986
  • Rear
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Dodge B250 1987
  • Rear
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Dodge B300 1975
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge B300 1976
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge B300 1977
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge B300 1978
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge B300 1979
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge B300 1980
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge B350 1981
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge B350 1982
  • Rear
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge B350 1983
  • Rear
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge B350 1984
  • Rear
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge B350 1985
  • Rear
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge B350 1986
  • Rear
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge B350 1987
  • Rear
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge D100 1975
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge D100 1976
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge D100 1977
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge D100 1978
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge D100 1979
  • 3.7L L6 3687CC/225CID
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge D100 1985
  • Rear
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Dodge D100 1986
  • Rear
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge D100 1987
  • Rear
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge D100 1988
  • Rear
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge D150 1978
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge D150 1979
  • 3.7L L6 3687CC/225CID
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge D150 1980
  • 3.7L L6 3687CC/225CID
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge D150 1981
  • 3.7L L6 3687CC/225CID
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge D150 1982
  • Rear
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge D150 1983
  • Rear
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Dodge D150 1984
  • Rear
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge D150 1985
  • Rear
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge D150 1986
  • Rear
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge D150 1987
  • Rear
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge D150 1988
  • Rear
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge D200 1975
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge D200 1976
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge D200 1977
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge D200 1978
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge D200 1979
  • 3.7L L6 3687CC/225CID
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge D200 1980
  • 3.7L L6 3687CC/225CID
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge D250 1981
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge D250 1982
  • Rear
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge D250 1983
  • Rear
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Dodge D250 1984
  • Rear
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge D250 1985
  • Rear
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge D250 1986
  • Rear
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge D250 1987
  • Rear
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge D250 1988
  • Rear
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge D300 1975
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge Dakota 1994
  • RWD
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Dodge Dakota 1995
  • RWD
  • 5.2L V8 5211CC/318CID
  • GAS
  • Cutting and Welding Required During Installation
Dodge Monaco 1975
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge Monaco 1976
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge Monaco 1977
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge Monaco 1978
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge Ramcharger 1975
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge Ramcharger 1976
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge Ramcharger 1977
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge Ramcharger 1978
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge Ramcharger 1979
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge Ramcharger 1980
  • 3.7L L6 3687CC/225CID
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge Ramcharger 1981
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge Ramcharger 1982
  • Rear
  • 4WD
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Dodge Ramcharger 1983
  • Rear
  • 4WD
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Dodge Ramcharger 1984
  • Rear
  • 4WD
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge Ramcharger 1985
  • Rear
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge Ramcharger 1986
  • Rear
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge Ramcharger 1987
  • Rear
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge Ramcharger 1988
  • Rear
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge Royal Monaco 1975
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge Royal Monaco 1976
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge Royal Monaco 1977
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge W100 1975
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge W100 1976
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge W100 1977
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge W100 1986
  • Rear
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge W100 1987
  • Rear
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge W100 1988
  • Rear
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge W150 1978
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge W150 1979
  • 3.7L L6 3687CC/225CID
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge W150 1980
  • 3.7L L6 3687CC/225CID
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge W150 1981
  • 3.7L L6 3687CC/225CID
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge W150 1985
  • Rear
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge W150 1986
  • Rear
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge W150 1987
  • Rear
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge W150 1988
  • Rear
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge W200 1976
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge W200 1977
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge W200 1978
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge W200 1979
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge W200 1980
  • 3.7L L6 3687CC/225CID
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge W250 1981
  • Rear
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge W250 1985
  • Rear
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge W250 1986
  • Rear
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge W250 1987
  • Rear
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge W250 1988
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge W300 1975
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge W350 1982
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge W350 1983
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge W350 1984
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge W350 1985
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge W350 1986
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge W350 1987
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Ferrari 308 GTB 1976
  • 3L V8 2927CC
  • Cutting and Welding Required During Installation
Ferrari 308 GTB 1977
  • 3L V8 2927CC
  • Cutting and Welding Required During Installation
Ferrari 308 GTB 1978
  • 3L V8 2927CC
  • Cutting and Welding Required During Installation
Ferrari 308 GTB 1979
  • 3L V8 2927CC
  • Cutting and Welding Required During Installation
Ferrari 308 GTB 1980
  • Left
  • Right
  • 3L V8 2927CC
  • Cutting and Welding Required During Installation
Ferrari 308 GTS 1977
  • 3L V8 2927CC
  • Cutting and Welding Required During Installation
Ferrari 308 GTS 1978
  • 3L V8 2927CC
  • Cutting and Welding Required During Installation
Ferrari 308 GTS 1979
  • 3L V8 2927CC
  • Cutting and Welding Required During Installation
Ferrari 308 GTS 1980
  • Left
  • Right
  • 3L V8 2927CC
  • Cutting and Welding Required During Installation
Ferrari 328 GTB 1986
  • 3.2L V8 3186CC
  • Cutting and Welding Required During Installation
Ferrari 328 GTB 1987
  • 3.2L V8 3186CC
  • Cutting and Welding Required During Installation
Ferrari 328 GTB 1988
  • 3.2L V8 3186CC
  • Cutting and Welding Required During Installation
Ferrari 328 GTS 1986
  • 3.2L V8 3186CC
  • Cutting and Welding Required During Installation
Ferrari 328 GTS 1987
  • 3.2L V8 3186CC
  • Cutting and Welding Required During Installation
Ferrari 328 GTS 1988
  • 3.2L V8 3186CC
  • Cutting and Welding Required During Installation
Ferrari 348 TB 1990
  • 3.4L V8 3405CC
  • Cutting and Welding Required During Installation
Ferrari 348 TS 1990
  • 3.4L V8 3405CC
  • Cutting and Welding Required During Installation
Ford Bronco 1978
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford Bronco 1979
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford E-100 Econoline 1979
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford E-100 Econoline 1980
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford E-100 Econoline 1981
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
  • California Emissions Equipped Vehicles Registered Outside Of California
Ford E-100 Econoline 1982
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
  • California Emissions Equipped Vehicles Registered Outside Of California
Ford E-100 Econoline 1983
  • Front
  • 5L V8 302CID
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Ford E-100 Econoline Club Wagon 1975
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford E-100 Econoline Club Wagon 1976
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford E-100 Econoline Club Wagon 1977
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford E-100 Econoline Club Wagon 1978
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford E-100 Econoline Club Wagon 1979
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford E-100 Econoline Club Wagon 1980
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford E-100 Econoline Club Wagon 1981
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
  • California Emissions Equipped Vehicles Registered Outside Of California
Ford E-100 Econoline Club Wagon 1982
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
  • California Emissions Equipped Vehicles Registered Outside Of California
Ford E-100 Econoline Club Wagon 1983
  • Front
  • 5L V8 302CID
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Ford E-150 Econoline 1975
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline 1976
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline 1977
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline 1978
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline 1979
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline 1980
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline 1981
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
  • California Emissions Equipped Vehicles Registered Outside Of California
Ford E-150 Econoline 1982
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
  • California Emissions Equipped Vehicles Registered Outside Of California
Ford E-150 Econoline 1983
  • Front
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
  • California Emissions Equipped Vehicles Registered Outside Of California
Ford E-150 Econoline 1984
  • Front
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline 1985
  • Front
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline Club Wagon 1975
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline Club Wagon 1976
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline Club Wagon 1977
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline Club Wagon 1978
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline Club Wagon 1979
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline Club Wagon 1980
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline Club Wagon 1981
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
  • California Emissions Equipped Vehicles Registered Outside Of California
Ford E-150 Econoline Club Wagon 1982
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
  • California Emissions Equipped Vehicles Registered Outside Of California
Ford E-150 Econoline Club Wagon 1983
  • Front
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
  • California Emissions Equipped Vehicles Registered Outside Of California
Ford E-150 Econoline Club Wagon 1984
  • Front
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline Club Wagon 1985
  • Front
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Ford E-250 Econoline 1975
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford E-250 Econoline 1976
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford E-250 Econoline 1977
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford E-250 Econoline 1978
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford E-250 Econoline 1979
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford E-250 Econoline 1980
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford E-250 Econoline 1981
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
  • California Emissions Equipped Vehicles Registered Outside Of California
Ford E-250 Econoline 1982
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
  • California Emissions Equipped Vehicles Registered Outside Of California
Ford E-250 Econoline 1983
  • Front
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
  • California Emissions Equipped Vehicles Registered Outside Of California
Ford E-250 Econoline 1984
  • Front
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Ford E-250 Econoline 1985
  • Front
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Ford E-250 Econoline Club Wagon 1975
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford E-250 Econoline Club Wagon 1976
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford E-250 Econoline Club Wagon 1977
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford E-250 Econoline Club Wagon 1978
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford E-250 Econoline Club Wagon 1979
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford E-250 Econoline Club Wagon 1980
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford E-250 Econoline Club Wagon 1981
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford E-250 Econoline Club Wagon 1982
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford E-250 Econoline Club Wagon 1983
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford F-150 1977
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford F-150 1978
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford F-150 1979
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford F-250 1977
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford F-250 1978
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford F-250 1979
  • 5.8L V8 351CID
  • 7.5L V8 460CID
  • Cutting and Welding Required During Installation
Ford Mustang 1983
  • 2.3L L4 140CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Ford Mustang 1984
  • 2.3L L4 140CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Ford Mustang 1985
  • 2.3L L4 140CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Ford Mustang 1986
  • 2.3L L4 140CID
  • Turbocharged
  • Cutting and Welding Required During Installation
GMC C15 Suburban 1975
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC C15 Suburban 1976
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC C15 Suburban 1977
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC C15 Suburban 1978
  • 5L V8 305CID
  • 4.1L L6 250CID
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
  • GAS
  • DIESEL
GMC C25 Suburban 1978
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC C1500 Suburban 1979
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • GAS
  • Cutting and Welding Required During Installation
  • DIESEL
GMC C1500 Suburban 1980
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • GAS
  • Cutting and Welding Required During Installation
GMC C1500 Suburban 1981
  • 5.7L V8 350CID
  • 5L V8 305CID
  • GAS
  • Cutting and Welding Required During Installation
  • DIESEL
GMC C1500 Suburban 1982
  • 5.7L V8 350CID
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
GMC C1500 Suburban 1983
  • 5.7L V8 350CID
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
GMC C1500 Suburban 1984
  • 5.7L V8 350CID
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
GMC C1500 Suburban 1985
  • 5.7L V8 350CID
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
GMC C1500 Suburban 1986
  • 5.7L V8 350CID
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
GMC C2500 Suburban 1979
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC C2500 Suburban 1980
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC C2500 Suburban 1981
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC C2500 Suburban 1982
  • 5.7L V8 350CID
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
GMC C2500 Suburban 1983
  • 5.7L V8 350CID
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
GMC C2500 Suburban 1984
  • 5.7L V8 350CID
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
GMC C2500 Suburban 1985
  • 5.7L V8 350CID
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
GMC C2500 Suburban 1986
  • 5.7L V8 350CID
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
GMC C15 1975
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC C15 1976
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC C15 1977
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC C15 1978
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC C25 1975
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC C25 1976
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC C25 1977
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC C25 1978
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Converter
  • Cutting and Welding Required During Installation
GMC C1500 1979
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • GAS
  • Cutting and Welding Required During Installation
GMC C1500 1980
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • GAS
  • Cutting and Welding Required During Installation
GMC C1500 1981
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC C1500 1982
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC C1500 1983
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC C1500 1984
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC C1500 1985
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC C1500 1986
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC C1500 1988
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC C1500 1989
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC C1500 1990
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC C1500 1991
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC C1500 1992
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC C1500 1993
  • 5L V8 305CID
  • 4.3L V6 262CID
  • without Y-Pipe Converter
  • Cutting and Welding Required During Installation
  • with Y-Pipe Converter
GMC C2500 1979
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • L
  • Converter
  • Cutting and Welding Required During Installation
GMC C2500 1980
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC C2500 1981
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Converter
  • Cutting and Welding Required During Installation
GMC C2500 1982
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Converter
  • Cutting and Welding Required During Installation
GMC C2500 1983
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC C2500 1984
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC C2500 1985
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC C2500 1986
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC C2500 1988
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC C2500 1989
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC C2500 1990
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
  • To 8,500lbs. Gross Vehicle Weight
GMC C2500 1991
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
  • To 8,500lbs. Gross Vehicle Weight
GMC C2500 1992
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
  • To 8,500lbs. Gross Vehicle Weight
GMC C2500 1993
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
  • To 8,500lbs. Gross Vehicle Weight
GMC Caballero 1978
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC Caballero 1979
  • 5.7L V8 350CID
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
GMC G15 1975
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC G15 1976
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC G15 1977
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC G15 1978
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC G25 1975
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC G25 1976
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC G25 1977
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC G25 1978
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC G35 1978
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC G1500 1979
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC G1500 1980
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC G1500 1981
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC G1500 1982
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC G1500 1983
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC G1500 1984
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC G1500 1985
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC G1500 1986
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC G1500 1987
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC G1500 1988
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC G1500 1989
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC G1500 1990
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC G1500 1991
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC G1500 1992
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC G1500 1993
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC G1500 1994
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC G2500 1979
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC G2500 1980
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC G2500 1981
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC G2500 1982
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC G2500 1983
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC G2500 1984
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC G2500 1985
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC G2500 1986
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC G2500 1987
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC G2500 1988
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC G2500 1989
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC G2500 1990
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC G2500 1991
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC G2500 1992
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC G2500 1993
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC G2500 1994
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC G3500 1979
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC G3500 1980
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC G3500 1981
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC G3500 1982
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC G3500 1983
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC G3500 1984
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • 5.7L V8 5733CC/350CID
  • Cutting and Welding Required During Installation
GMC G3500 1985
  • 5.7L V8 350CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC G3500 1986
  • 5.7L V8 350CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC G3500 1987
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC G3500 1988
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC G3500 1989
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC G3500 1990
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC G3500 1991
  • 4.3L V6 262CID
  • To 8,600lbs. Gross Vehicle Weight
  • Cutting and Welding Required During Installation
GMC G3500 1992
  • 4.3L V6 262CID
  • To 8,600lbs. Gross Vehicle Weight
  • Cutting and Welding Required During Installation
GMC G3500 1993
  • 4.3L V6 262CID
  • To 8,600lbs. Gross Vehicle Weight
  • Cutting and Welding Required During Installation
GMC G3500 1994
  • 4.3L V6 262CID
  • To 8,600lbs. Gross Vehicle Weight
  • Cutting and Welding Required During Installation
GMC G3500 1996
  • Right
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC Jimmy 1975
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC Jimmy 1976
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC Jimmy 1977
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC Jimmy 1978
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC Jimmy 1979
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC Jimmy 1980
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC Jimmy 1981
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC Jimmy 1982
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC Jimmy 1983
  • 5.7L V8 350CID
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
GMC Jimmy 1984
  • 5.7L V8 350CID
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
GMC Jimmy 1985
  • 5.7L V8 350CID
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
GMC Jimmy 1986
  • 5.7L V8 350CID
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
GMC Jimmy 1987
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
GMC Jimmy 1992
  • 4.3L V6 262CID
  • W
  • Cutting and Welding Required During Installation
  • Z
GMC Jimmy 1993
  • 4.3L V6 262CID
  • W
  • Cutting and Welding Required During Installation
  • Z
GMC Jimmy 1994
  • 4.3L V6 262CID
  • W
  • Cutting and Welding Required During Installation
  • Z
GMC Jimmy 1995
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC K15 Suburban 1975
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC K15 Suburban 1976
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC K15 Suburban 1977
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC K15 Suburban 1978
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC K25 Suburban 1978
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC K1500 Suburban 1979
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC K1500 Suburban 1980
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC K1500 Suburban 1981
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC K1500 Suburban 1982
  • 5.7L V8 350CID
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
GMC K1500 Suburban 1983
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC K1500 Suburban 1984
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC K1500 Suburban 1985
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC K1500 Suburban 1986
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC K2500 Suburban 1979
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC K2500 Suburban 1980
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC K2500 Suburban 1981
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC K2500 Suburban 1982
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC K2500 Suburban 1983
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC K2500 Suburban 1984
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC K2500 Suburban 1985
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC K2500 Suburban 1986
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC K15 1975
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC K15 1976
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
  • Single Exhaust
  • Dual Exhaust
  • Left
  • Right
GMC K15 1977
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
  • Single Exhaust
  • Dual Exhaust
  • Left
  • Right
GMC K15 1978
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC K25 1975
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC K25 1976
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC K25 1977
  • 5.7L V8 350CID
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
GMC K25 1978
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • L
  • Converter
  • Cutting and Welding Required During Installation
GMC K1500 1979
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC K1500 1980
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC K1500 1981
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC K1500 1982
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC K1500 1983
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC K1500 1984
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC K1500 1985
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC K1500 1986
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC K1500 1988
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC K1500 1989
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC K1500 1990
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC K1500 1991
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC K1500 1992
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC K1500 1993
  • 5L V8 305CID
  • 4.3L V6 262CID
  • without Y-Pipe Converter
  • Cutting and Welding Required During Installation
  • with Y-Pipe Converter
GMC K2500 1979
  • 5.7L V8 350CID
  • L
  • Converter
  • Cutting and Welding Required During Installation
GMC K2500 1980
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC K2500 1981
  • 5.7L V8 350CID
  • Converter
  • Cutting and Welding Required During Installation
GMC K2500 1982
  • 5.7L V8 350CID
  • Converter
  • Cutting and Welding Required During Installation
GMC K2500 1983
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC K2500 1984
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC K2500 1985
  • 5.7L V8 350CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC K2500 1986
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC K2500 1988
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC K2500 1989
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC K2500 1990
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
  • To 8,500lbs. Gross Vehicle Weight
GMC K2500 1991
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
  • To 8,500lbs. Gross Vehicle Weight
GMC K2500 1992
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
  • To 8,500lbs. Gross Vehicle Weight
GMC K2500 1993
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
  • To 8,500lbs. Gross Vehicle Weight
GMC R1500 Suburban 1987
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
GMC R1500 1987
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC R2500 1987
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC S15 Jimmy 1988
  • 4.3L V6 262CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
GMC S15 Jimmy 1989
  • 4.3L V6 262CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
GMC S15 Jimmy 1990
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC S15 Jimmy 1991
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC S15 1988
  • 4.3L V6 262CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
GMC S15 1989
  • 4.3L V6 262CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
GMC S15 1990
  • 4.3L V6 262CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
GMC Safari 1985
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC Safari 1986
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC Safari 1987
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC Safari 1988
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC Safari 1989
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC Safari 1990
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC Safari 1991
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC Safari 1992
  • 4.3L V6 262CID
  • Z
  • Cutting and Welding Required During Installation
GMC Savana 3500 1996
  • Right
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC Savana 3500 1997
  • Right
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC Savana 3500 1998
  • Right
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC Savana 3500 1999
  • Right
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC Sonoma 1991
  • 4.3L V6 262CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
GMC Sonoma 1992
  • 4.3L V6 262CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
GMC Sonoma 1993
  • 4.3L V6 262CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
GMC Sonoma 1994
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC Sonoma 1995
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC Sprint 1975
  • 5.7L V8 350CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC Sprint 1976
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC Sprint 1977
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
GMC Syclone 1991
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC Typhoon 1992
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC Typhoon 1993
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC V1500 1987
  • 5L V8 305CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
International Scout II 1979
  • 5L V8 304CID
  • 5.6L V8 345CID
  • 3.2L L4 196CID
  • Cutting and Welding Required During Installation
International Scout II 1980
  • 5L V8 304CID
  • 5.6L V8 345CID
  • 3.2L L4 196CID
  • Cutting and Welding Required During Installation
Isuzu Trooper 1992
  • 3.2L V6 3165CC
  • Cutting and Welding Required During Installation
Isuzu Trooper 1993
  • 3.2L V6 3165CC
  • Cutting and Welding Required During Installation
Jeep Cherokee 1978
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Jeep Cherokee 1981
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Jeep Cherokee 1982
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Jeep Cherokee 1983
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Jeep CJ5 1975
  • 4.2L L6 258CID
  • 5L V8 304CID
  • 3.8L L6 232CID
  • Cutting and Welding Required During Installation
Jeep CJ5 1976
  • 4.2L L6 258CID
  • 5L V8 304CID
  • 3.8L L6 232CID
  • Cutting and Welding Required During Installation
Jeep CJ5 1977
  • 4.2L L6 258CID
  • 5L V8 304CID
  • 3.8L L6 232CID
  • Cutting and Welding Required During Installation
Jeep CJ5 1978
  • 4.2L L6 258CID
  • 5L V8 304CID
  • 3.8L L6 232CID
  • Cutting and Welding Required During Installation
Jeep CJ5 1981
  • 5L V8 304CID
  • Cutting and Welding Required During Installation
Jeep CJ7 1976
  • 4.2L L6 258CID
  • 3.8L L6 232CID
  • Cutting and Welding Required During Installation
Jeep CJ7 1977
  • 4.2L L6 258CID
  • 3.8L L6 232CID
  • Cutting and Welding Required During Installation
Jeep CJ7 1978
  • 4.2L L6 258CID
  • 5L V8 304CID
  • 3.8L L6 232CID
  • Cutting and Welding Required During Installation
Jeep CJ7 1979
  • 4.2L L6 258CID
  • 5L V8 304CID
  • Cutting and Welding Required During Installation
Jeep CJ7 1980
  • 4.2L L6 258CID
  • 5L V8 304CID
  • 2.5L L4 151CID
  • Cutting and Welding Required During Installation
Jeep CJ7 1981
  • 4.2L L6 258CID
  • 5L V8 304CID
  • 2.5L L4 151CID
  • Cutting and Welding Required During Installation
Jeep CJ7 1982
  • 2.5L L4 151CID
  • Cutting and Welding Required During Installation
Jeep CJ7 1983
  • 2.5L L4 150CID
  • 2.5L L4 151CID
  • Cutting and Welding Required During Installation
Jeep Grand Cherokee 1993
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Jeep Grand Cherokee 1994
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Jeep Grand Cherokee 1995
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Jeep J10 1979
  • 4.2L L6 258CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Jeep J10 1980
  • 4.2L L6 258CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Jeep J10 1981
  • 4.2L L6 258CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Jeep J10 1982
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Jeep J10 1983
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Jeep J10 1984
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Jeep J10 1985
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Jeep J10 1986
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Jeep J10 1987
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Jeep J10 1988
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Jeep J20 1979
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Jeep J20 1980
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Jeep J20 1981
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Jeep J20 1982
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Jeep J20 1983
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Jeep J20 1984
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Jeep J20 1985
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Jeep J20 1986
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Jeep J20 1987
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Jeep J20 1988
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Jeep Scrambler 1983
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep Wagoneer 1978
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Jeep Wagoneer 1981
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Jeep Wagoneer 1982
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Jeep Wagoneer 1983
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Maserati Quattroporte 1980
  • 4.9L V8 4930CC
  • Cutting and Welding Required During Installation
Maserati Quattroporte 1981
  • 4.9L V8 4930CC
  • Cutting and Welding Required During Installation
Maserati Quattroporte 1982
  • 4.9L V8 4930CC
  • Cutting and Welding Required During Installation
Mercury Capri 1983
  • 2.3L L4 140CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Mercury Capri 1984
  • 2.3L L4 140CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Oldsmobile 98 1977
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Oldsmobile Aurora 1995
  • 4L V8 244CID
  • Cutting and Welding Required During Installation
Oldsmobile Bravada 1991
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Oldsmobile Bravada 1992
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Oldsmobile Bravada 1993
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Oldsmobile Bravada 1994
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Oldsmobile Custom Cruiser 1977
  • 5.7L V8 350CID
  • GAS
  • Cutting and Welding Required During Installation
Oldsmobile Custom Cruiser 1978
  • 5.7L V8 350CID
  • GAS
  • Cutting and Welding Required During Installation
Oldsmobile Custom Cruiser 1979
  • 5.7L V8 350CID
  • GAS
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass 1975
  • 4.1L L6 250CID
  • 4.3L V8 260CID
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass 1976
  • 4.1L L6 250CID
  • 4.3L V8 260CID
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass 1977
  • 3.8L V6 231CID
  • 4.3L V8 260CID
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass 1978
  • 5.7L V8 350CID
  • 5L V8 305CID
  • GAS
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass 1979
  • 5.7L V8 350CID
  • 5L V8 305CID
  • GAS
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass 1980
  • 5L V8 305CID
  • 3.8L V6 3800CC/231CID
  • without Air Tube
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Calais 1978
  • 5L V8 305CID
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Calais 1979
  • 5L V8 305CID
  • 3.8L V6 231CID
  • 5.7L V8 350CID
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Calais 1980
  • 5L V8 305CID
  • 3.8L V6 3800CC/231CID
  • without Air Tube
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Cruiser 1980
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Salon 1975
  • 4.3L V8 260CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Salon 1976
  • 4.3L V8 260CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Salon 1977
  • 4.3L V8 260CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Salon 1978
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Salon 1979
  • 5L V8 305CID
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Salon 1980
  • 5L V8 305CID
  • 3.8L V6 3800CC/231CID
  • without Air Tube
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Supreme 1975
  • 4.1L L6 250CID
  • 4.3L V8 260CID
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Supreme 1976
  • 4.1L L6 250CID
  • 4.3L V8 260CID
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Supreme 1977
  • 3.8L V6 231CID
  • 4.3L V8 260CID
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Supreme 1978
  • 5.7L V8 350CID
  • 5L V8 305CID
  • GAS
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Supreme 1979
  • 5L V8 305CID
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
  • GAS
Oldsmobile Cutlass Supreme 1980
  • 3.8L V6 3800CC/231CID
  • without Air Tube
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Tiara 1976
  • 4.3L V8 260CID
  • Cutting and Welding Required During Installation
Oldsmobile Delta 88 1976
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Oldsmobile Delta 88 1977
  • 5.7L V8 350CID
  • 3.8L V6 231CID
  • 3.8L V6 3800CC/231CID
  • GAS
  • Cutting and Welding Required During Installation
Oldsmobile Delta 88 1978
  • 5.7L V8 350CID
  • 3.8L V6 3800CC/231CID
  • GAS
  • Cutting and Welding Required During Installation
Oldsmobile Delta 88 1979
  • 5.7L V8 350CID
  • 3.8L V6 3800CC/231CID
  • 4.9L V8 301CID
  • GAS
  • Cutting and Welding Required During Installation
Oldsmobile Delta 88 1980
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Oldsmobile Omega 1975
  • 4.1L L6 250CID
  • 4.3L V8 260CID
  • 5.7L V8 5733CC/350CID
  • Cutting and Welding Required During Installation
Oldsmobile Omega 1976
  • 4.1L L6 250CID
  • 4.3L V8 260CID
  • 5.7L V8 5733CC/350CID
  • Cutting and Welding Required During Installation
Oldsmobile Omega 1977
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 3.8L V6 231CID
  • 4.3L V8 260CID
  • Cutting and Welding Required During Installation
Oldsmobile Omega 1978
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Oldsmobile Omega 1979
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Oldsmobile Starfire 1976
  • 3.8L V6 231CID
  • Cutting and Welding Required During Installation
Oldsmobile Starfire 1977
  • 5L V8 305CID
  • 3.8L V6 231CID
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Oldsmobile Starfire 1978
  • 5L V8 305CID
  • 3.8L V6 3800CC/231CID
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Oldsmobile Starfire 1979
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
Oldsmobile Starfire 1980
  • 3.8L V6 3800CC/231CID
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Oldsmobile Toronado 1979
  • 5.7L V8 350CID
  • GAS
  • Cutting and Welding Required During Installation
Oldsmobile Vista Cruiser 1975
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Peugeot 405 1989
  • 1.9L L4 1905CC
  • Cutting and Welding Required During Installation
Peugeot 405 1990
  • 1.9L L4 1905CC
  • Cutting and Welding Required During Installation
Peugeot 405 1991
  • 1.9L L4 1905CC
  • Cutting and Welding Required During Installation
Plymouth Gran Fury 1975
  • Right
  • 5.9L V8 360CID
  • Dual Exhaust
  • Cutting and Welding Required During Installation
Plymouth Gran Fury 1976
  • Right
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
  • Excluding Dual Exhaust
  • Dual Exhaust
Plymouth Gran Fury 1977
  • Right
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
  • Excluding Dual Exhaust
  • Dual Exhaust
Plymouth PB100 1975
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Plymouth PB100 1976
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Plymouth PB100 1977
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Plymouth PB100 1978
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Plymouth PB150 1981
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Plymouth PB150 1983
  • Rear
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Plymouth PB200 1975
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Plymouth PB200 1976
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Plymouth PB200 1977
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Plymouth PB200 1978
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Plymouth PB200 1979
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Plymouth PB200 1980
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Plymouth PB250 1981
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Plymouth PB250 1982
  • Rear
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Plymouth PB250 1983
  • Rear
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Plymouth PB300 1975
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Plymouth PB300 1976
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Plymouth PB300 1977
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Plymouth PB300 1978
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Plymouth PB300 1979
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Plymouth PB300 1980
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Plymouth PB350 1981
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Plymouth PB350 1982
  • Rear
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Plymouth PB350 1983
  • Rear
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Plymouth Trailduster 1975
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Plymouth Trailduster 1976
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Plymouth Trailduster 1977
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Plymouth Trailduster 1978
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Plymouth Trailduster 1979
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Plymouth Trailduster 1980
  • 3.7L L6 3687CC/225CID
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Plymouth Trailduster 1981
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Pontiac Astre 1977
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Pontiac Bonneville 1977
  • 5.7L V8 5733CC/350CID
  • 4.9L V8 301CID
  • Cutting and Welding Required During Installation
Pontiac Bonneville 1978
  • 5.7L V8 350CID
  • 4.9L V8 301CID
  • Cutting and Welding Required During Installation
Pontiac Bonneville 1979
  • 5.7L V8 350CID
  • 4.9L V8 301CID
  • Cutting and Welding Required During Installation
Pontiac Bonneville 1980
  • 4.3L V8 265CID
  • 4.9L V8 301CID
  • Cutting and Welding Required During Installation
Pontiac Catalina 1976
  • 5.7L V8 5733CC/350CID
  • Cutting and Welding Required During Installation
Pontiac Catalina 1977
  • 3.8L V6 231CID
  • 5.7L V8 350CID
  • 5.7L V8 5733CC/350CID
  • 3.8L V6 3800CC/231CID
  • 4.9L V8 301CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
  • CAN
Pontiac Catalina 1978
  • 5.7L V8 350CID
  • 3.8L V6 3800CC/231CID
  • 4.9L V8 301CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
  • CAN
Pontiac Catalina 1979
  • 5.7L V8 350CID
  • 3.8L V6 3800CC/231CID
  • 4.9L V8 301CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
  • CAN
Pontiac Catalina 1980
  • 5.7L V8 350CID
  • 4.3L V8 265CID
  • 4.9L V8 301CID
  • 4.4L V8 267CID
  • GAS
  • Cutting and Welding Required During Installation
  • CAN
Pontiac Firebird 1975
  • 4.1L L6 250CID
  • 5.7L V8 5733CC/350CID
  • Cutting and Welding Required During Installation
Pontiac Firebird 1976
  • 4.1L L6 250CID
  • 5.7L V8 5733CC/350CID
  • Cutting and Welding Required During Installation
Pontiac Firebird 1977
  • 5L V8 305CID
  • 3.8L V6 231CID
  • 5.7L V8 350CID
  • 5.7L V8 5733CC/350CID
  • 4.9L V8 301CID
  • Cutting and Welding Required During Installation
Pontiac Firebird 1978
  • 5L V8 305CID
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Pontiac Firebird 1979
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 3.8L V6 3800CC/231CID
  • 4.9L V8 301CID
  • Cutting and Welding Required During Installation
Pontiac Firebird 1980
  • Base
  • Esprit
  • Formula
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
Pontiac Grand Am 1979
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
Pontiac Grand Am 1980
  • 4.9L V8 301CID
  • Cutting and Welding Required During Installation
Pontiac Grand LeMans 1975
  • 4.1L L6 250CID
  • 5.7L V8 5733CC/350CID
  • Cutting and Welding Required During Installation
Pontiac Grand LeMans 1976
  • 4.1L L6 250CID
  • 4.3L V8 260CID
  • 5.7L V8 5733CC/350CID
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
  • CAN
Pontiac Grand LeMans 1977
  • 5L V8 305CID
  • 3.8L V6 231CID
  • 5.7L V8 350CID
  • 5.7L V8 5733CC/350CID
  • 4.9L V8 301CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
  • CAN
Pontiac Grand LeMans 1978
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Pontiac Grand LeMans 1979
  • 5.7L V8 350CID
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
Pontiac Grand LeMans 1980
  • 5L V8 305CID
  • 3.8L V6 3800CC/231CID
  • 4.9L V8 301CID
  • Cutting and Welding Required During Installation
  • A
Pontiac Grand Prix 1976
  • 5.7L V8 5733CC/350CID
  • Cutting and Welding Required During Installation
Pontiac Grand Prix 1977
  • 5.7L V8 350CID
  • 5.7L V8 5733CC/350CID
  • 4.9L V8 301CID
  • Cutting and Welding Required During Installation
Pontiac Grand Prix 1978
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
Pontiac Grand Prix 1979
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
Pontiac Grand Prix 1980
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
Pontiac Grand Safari 1977
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Pontiac LeMans 1975
  • 4.1L L6 250CID
  • 5.7L V8 5733CC/350CID
  • Cutting and Welding Required During Installation
Pontiac LeMans 1976
  • 4.1L L6 250CID
  • 4.3L V8 260CID
  • 5.7L V8 5733CC/350CID
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
  • CAN
Pontiac LeMans 1977
  • 5L V8 305CID
  • 3.8L V6 231CID
  • 5.7L V8 350CID
  • 5.7L V8 5733CC/350CID
  • 4.9L V8 301CID
  • 4.1L L6 250CID
  • Cutting and Welding Required During Installation
  • CAN
Pontiac LeMans 1978
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Pontiac LeMans 1979
  • 5.7L V8 350CID
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
Pontiac LeMans 1980
  • 5L V8 305CID
  • 3.8L V6 3800CC/231CID
  • 4.9L V8 301CID
  • Cutting and Welding Required During Installation
  • A
Pontiac LeMans 1981
  • 3.8L V6 3800CC/231CID
  • A
  • Cutting and Welding Required During Installation
Pontiac Parisienne 1976
  • 5.7L V8 5733CC/350CID
  • Cutting and Welding Required During Installation
  • CAN
Pontiac Parisienne 1977
  • 4.1L L6 250CID
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
  • CAN
Pontiac Parisienne 1978
  • 4.1L L6 250CID
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
  • CAN
Pontiac Parisienne 1979
  • 4.1L L6 250CID
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
  • CAN
Pontiac Parisienne 1980
  • 4.4L V8 267CID
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
  • CAN
Pontiac Phoenix 1977
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 3.8L V6 231CID
  • 2.5L L4 2474CC/151CID
  • L
  • Cutting and Welding Required During Installation
  • R
Pontiac Phoenix 1978
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 3.8L V6 3800CC/231CID
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Pontiac Phoenix 1979
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Pontiac Sunbird 1976
  • 3.8L V6 231CID
  • Cutting and Welding Required During Installation
Pontiac Sunbird 1977
  • 3.8L V6 231CID
  • 3.8L V6 3800CC/231CID
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Pontiac Sunbird 1978
  • 5L V8 305CID
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Pontiac Sunbird 1979
  • 5L V8 305CID
  • 3.8L V6 3800CC/231CID
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Pontiac Sunbird 1980
  • 3.8L V6 3800CC/231CID
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Pontiac Ventura 1975
  • 4.1L L6 250CID
  • 4.3L V8 260CID
  • 5.7L V8 5733CC/350CID
  • Cutting and Welding Required During Installation
Pontiac Ventura 1976
  • 4.1L L6 250CID
  • 4.3L V8 260CID
  • 5.7L V8 5733CC/350CID
  • Cutting and Welding Required During Installation
Pontiac Ventura 1977
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 3.8L V6 231CID
  • 4.9L V8 301CID
  • 2.5L L4 2474CC/151CID
  • L
  • Cutting and Welding Required During Installation
  • R