100% CON SEDE EN CANADÁ 100% CANADIENSE
SIN DERECHOS NI TASAS ADUANERAS SIN TASAS ADUANERAS
DISTRIBUIDOR AUTORIZADO DISTRIBUIDOR AUTOR.
30 DÍAS - DEVOLUCIÓN SIN COMPLICACIÓN 30 DÍAS – DEVOLUCIÓNES

MagnaFlowStainless Federal Catalytic Converter without Sensor Port (2.25" IN\/2.25" OUT)

AUTHORIZED DEALER

53005

Manufacturer Part Number
*Images are for illustrative purpose only. Actual Product may differ.
SKU: MAG-53005
Seleccione un vehículo para comprobar la compatibilidad.

Por Favor Seleccione un Vehículo

This will be used to show you compatible parts.

Auto Parts Finder

This product doesn't fit your selection!

The product shown on this page is not compatible with the selected vehicle

!
To ensure proper parts fitment, please browse compatible products or change your selection.


Change Current Selection
Transporte gratuito*
Standard Warranty

Pedido Especial
1-3 Semanas
CAD140.00
Stainless Federal Catalytic Converter without Sensor Port (2.25" IN\/2.25" OUT) está disponible para comprar en incrementos de 1
AUTHORIZED DEALER

53005

Manufacturer Part Number
Más Información
Fabricante MagnaFlow
Número de Pieza del Fabricante 53005
Precio de Venta Sugerido por el Fabricante (MSRP) CAD103.93
Escribir Su propia reseña
Solo usuarios registrados pueden escribir comentarios. Por favor, iniciar sesión o crear una cuenta
This table represents all the 185 compatible vehicles for this part:
Marca Modelo Año
Application Notes
Position Submodel Body Type Drive Type Engine Aspiration Additional Information
Acura Legend 1991
  • 3.2L V6 3206CC
  • Cutting and Welding Required During Installation
Acura Legend 1992
  • 3.2L V6 3206CC
  • Cutting and Welding Required During Installation
Acura Legend 1993
  • Rear
  • 3.2L V6 3206CC
  • Cutting and Welding Required During Installation
Acura Legend 1994
  • Rear
  • GS
  • L
  • LS
  • 3.2L V6 3206CC
  • Cutting and Welding Required During Installation
Acura Legend 1995
  • Rear
  • GS
  • L
  • LS
  • SE
  • 3.2L V6 3206CC
  • Cutting and Welding Required During Installation
Audi 100 Quattro 1989
  • 2.3L L5 2309CC
  • Cutting and Welding Required During Installation
Audi 100 Quattro 1990
  • 2.3L L5 2309CC
  • Cutting and Welding Required During Installation
Audi 100 Quattro 1991
  • 2.3L L5 2309CC
  • Cutting and Welding Required During Installation
Audi 200 Quattro 1989
  • 2.2L L5 2226CC
  • Cutting and Welding Required During Installation
Audi 200 Quattro 1990
  • 2.2L L5 2226CC
  • Cutting and Welding Required During Installation
Audi 200 Quattro 1991
  • 2.2L L5 2226CC
  • Cutting and Welding Required During Installation
Audi Coupe Quattro 1990
  • 2.3L L5 2309CC
  • Cutting and Welding Required During Installation
Audi Coupe Quattro 1991
  • 2.3L L5 2309CC
  • Cutting and Welding Required During Installation
Audi V8 Quattro 1990
  • Left
  • Right
  • 3.6L V8 3562CC
  • Cutting and Welding Required During Installation
Audi V8 Quattro 1991
  • Left
  • Right
  • 3.6L V8 3562CC
  • Cutting and Welding Required During Installation
Bentley Corniche 1979
  • Left
  • Right
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Bentley Corniche 1980
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Bentley Mulsanne 1981
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Bentley T2 Series 1979
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Bentley T2 Series 1980
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Chevrolet Corvette 1986
  • Front Left
  • Front Right
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet Corvette 1987
  • Front Left
  • Front Right
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet Corvette 1988
  • Front Left
  • Front Right
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet Corvette 1989
  • Front Left
  • Front Right
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet Corvette 1990
  • Front Left
  • Front Right
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet Corvette 1991
  • Front Left
  • Front Right
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Ford Bronco II 1990
  • Front
  • Rear
  • 2.9L V6 177CID
  • Cutting and Welding Required During Installation
Ford Gran Torino 1975
  • Right
  • Left
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford Gran Torino 1976
  • Right
  • Left
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford LTD 1975
  • Right
  • Left
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford LTD 1976
  • Right
  • Left
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford LTD 1977
  • Left
  • Right
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford LTD 1978
  • Right
  • Left
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford LTD II 1977
  • Left
  • Right
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford LTD II 1978
  • Right
  • Left
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford LTD II 1979
  • Right
  • Left
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford Thunderbird 1989
  • Left
  • Right
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Ford Thunderbird 1990
  • Left
  • Right
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Ford Thunderbird 1991
  • Left
  • Right
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Ford Thunderbird 1992
  • Left
  • Base
  • Super Coupe
  • LX
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Ford Thunderbird 1993
  • Left
  • Super Coupe
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Ford Thunderbird 1994
  • Left
  • Super Coupe
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Ford Thunderbird 1995
  • Left
  • Super Coupe
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Ford Torino 1975
  • Right
  • Left
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford Torino 1976
  • Left
  • Right
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Honda Passport 1994
  • Front
  • 2.6L L4 2559CC
  • Cutting and Welding Required During Installation
Honda Passport 1995
  • Front
  • 2.6L L4 2559CC
  • Cutting and Welding Required During Installation
INFINITI J30 1993
  • Left
  • Right
  • 3L V6 2960CC/181CID
  • Cutting and Welding Required During Installation
INFINITI J30 1994
  • Left
  • Right
  • 3L V6 2960CC/181CID
  • Cutting and Welding Required During Installation
INFINITI J30 1995
  • Left
  • Right
  • 3L V6 2960CC/181CID
  • Cutting and Welding Required During Installation
Mazda RX-7 1986
  • Center
  • Front
  • 1.3L R2 1308CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Mazda RX-7 1987
  • Center
  • Front
  • 1.3L R2 1308CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Mazda RX-7 1988
  • Center
  • Front
  • 1.3L R2 1308CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Mazda RX-7 1989
  • Center
  • Front
  • 1.3L R2 1308CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Mazda RX-7 1990
  • Center
  • Front
  • 1.3L R2 1308CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Mazda RX-7 1991
  • Center
  • Front
  • 1.3L R2 1308CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Mercedes-Benz 190E 1986
  • Front
  • 2.3L L4 2299CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 190E 1987
  • Front
  • 2.3L L4 2299CC
  • Cutting and Welding Required During Installation
Mercedes-Benz S500 1994
  • Right
  • Left
  • 5L V8 4973CC
  • Cutting and Welding Required During Installation
Mercedes-Benz S500 1995
  • Right
  • Left
  • 5L V8 4973CC
  • Cutting and Welding Required During Installation
Mercury Cougar 1975
  • Left
  • Right
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Mercury Cougar 1976
  • Right
  • Left
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Mercury Cougar 1989
  • Left
  • Right
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Mercury Cougar 1990
  • Left
  • Right
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Mercury Cougar 1991
  • Left
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Mercury Cougar 1992
  • Left
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Mercury Cougar 1993
  • Left
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Mercury Cougar 1994
  • Left
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Mercury Cougar 1995
  • Left
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Mercury Marquis 1978
  • Right
  • Left
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Mercury Montego 1975
  • Right
  • Left
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Mercury Montego 1976
  • Right
  • Left
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Mercury Villager 1994
  • Front
  • 3L V6 182CID
  • Cutting and Welding Required During Installation
Mercury Villager 1995
  • Front
  • 3L V6 182CID
  • Cutting and Welding Required During Installation
Mitsubishi Mirage 1993
  • 1.5L L4 1468CC/90cCID
  • 1.8L L4 1834CC/112CID
  • Cutting and Welding Required During Installation
Mitsubishi Mirage 1994
  • 1.8L L4 1834CC/112CID
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
Mitsubishi Mirage 1995
  • 1.8L L4 1834CC/112CID
  • Cutting and Welding Required During Installation
Nissan 200SX 1995
  • 1.6L L4 1597CC/97cCID
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Nissan 200SX 1996
  • 1.6L L4 1597CC/97cCID
  • Cutting and Welding Required During Installation
Nissan 240SX 1995
  • Rear
  • 2.4L L4 2389CC
  • Cutting and Welding Required During Installation
Nissan D21 1988
  • RWD
  • 2.4L L4 2389CC
  • Cutting and Welding Required During Installation
Nissan D21 1989
  • RWD
  • 2.4L L4 2389CC
  • Cutting and Welding Required During Installation
Nissan NX 1991
  • 1.6L L4 1597CC/97cCID
  • Cutting and Welding Required During Installation
Nissan NX 1992
  • 1.6L L4 1597CC/97cCID
  • Cutting and Welding Required During Installation
Nissan NX 1993
  • 1.6L L4 1597CC/97cCID
  • Cutting and Welding Required During Installation
Nissan Quest 1994
  • Front
  • 3L V6 2960CC/181CID
  • Cutting and Welding Required During Installation
Nissan Quest 1995
  • Front
  • 3L V6 2960CC/181CID
  • Cutting and Welding Required During Installation
Nissan Stanza 1987
  • Sedan
  • 2L L4 1974CC
  • Cutting and Welding Required During Installation
Nissan Stanza 1988
  • Sedan
  • 2L L4 1974CC
  • Cutting and Welding Required During Installation
Nissan Stanza 1989
  • 2L L4 1974CC
  • Cutting and Welding Required During Installation
Peugeot 604 1977
  • Left
  • Right
  • 2.8L V6 2849CC
  • 2.7L L6 2664CC
  • Cutting and Welding Required During Installation
Peugeot 604 1978
  • Left
  • Right
  • 2.8L V6 2849CC
  • 2.7L L6 2664CC
  • Cutting and Welding Required During Installation
Peugeot 604 1979
  • Left
  • Right
  • 2.8L V6 2849CC
  • Cutting and Welding Required During Installation
Peugeot 604 1980
  • Left
  • Right
  • 2.8L V6 2849CC
  • Cutting and Welding Required During Installation
Porsche 968 1992
  • 3L L4 2983CC
  • Cutting and Welding Required During Installation
Porsche 968 1993
  • 3L L4 2983CC
  • Cutting and Welding Required During Installation
Porsche 968 1994
  • 3L L4 2983CC
  • Cutting and Welding Required During Installation
Porsche 968 1995
  • 3L L4 2983CC
  • Cutting and Welding Required During Installation
Rolls-Royce Camargue 1979
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls-Royce Camargue 1980
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls-Royce Camargue 1981
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls-Royce Camargue 1982
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls-Royce Camargue 1983
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls-Royce Camargue 1984
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls-Royce Camargue 1985
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls-Royce Camargue 1986
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls-Royce Camargue 1987
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls-Royce Corniche 1979
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls-Royce Corniche 1980
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls-Royce Corniche 1981
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls-Royce Corniche 1982
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls-Royce Corniche 1983
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls-Royce Corniche 1984
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls-Royce Corniche 1985
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls-Royce Corniche II 1986
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls-Royce Corniche II 1987
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls-Royce Corniche II 1988
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls-Royce Corniche II 1989
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls-Royce Corniche II 1990
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls-Royce Silver Spirit 1981
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls-Royce Silver Spirit 1982
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls-Royce Silver Spirit 1983
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls-Royce Silver Spirit 1984
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls-Royce Silver Spirit 1985
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls-Royce Silver Spirit 1986
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls-Royce Silver Spirit 1987
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls-Royce Silver Spirit 1988
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls-Royce Silver Spirit 1989
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls-Royce Silver Spirit 1990
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls-Royce Silver Spur 1981
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls-Royce Silver Spur 1982
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls-Royce Silver Spur 1983
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls-Royce Silver Spur 1984
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls-Royce Silver Spur 1985
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls-Royce Silver Spur 1986
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls-Royce Silver Spur 1987
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls-Royce Silver Spur 1988
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls-Royce Silver Spur 1989
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls-Royce Silver Spur 1990
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls-Royce Silver Wraith II 1979
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls-Royce Silver Wraith II 1980
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Saab 900 1979
  • 2L L4 1985CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Saab 900 1980
  • 2L L4 1985CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Saab 900 1981
  • 2L L4 1985CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Saab 900 1982
  • 2L L4 1985CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Saab 900 1983
  • 2L L4 1985CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Saab 900 1984
  • 2L L4 1985CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Saab 900 1985
  • 2L L4 1985CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Saab 900 1986
  • 2L L4 1985CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Saab 900 1987
  • 2L L4 1985CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Saab 900 1988
  • 2L L4 1985CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Saab 900 1989
  • 2L L4 1985CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Saab 900 1990
  • 2L L4 1985CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Saab 900 1991
  • 2L L4 1985CC
  • 2.1L L4 2119CC
  • Cutting and Welding Required During Installation
Saab 900 1992
  • 2L L4 1985CC
  • 2.1L L4 2119CC
  • Cutting and Welding Required During Installation
Saab 900 1993
  • 2L L4 1985CC
  • 2.1L L4 2119CC
  • Cutting and Welding Required During Installation
Saab 900 1994
  • 2L L4 1985CC
  • 2.5L V6 2498CC
  • 2.3L L4 2290CC/140CID
  • Cutting and Welding Required During Installation
Saab 900 1995
  • 2L L4 1985CC
  • 2.5L V6 2498CC
  • 2.3L L4 2290CC/140CID
  • Cutting and Welding Required During Installation
Sterling Truck 825 1987
  • 2.5L V6 2494CC
  • Cutting and Welding Required During Installation
Sterling Truck 825 1988
  • 2.5L V6 2494CC
  • Cutting and Welding Required During Installation
Sterling Truck 827 1989
  • 2.7L V6 2675CC
  • Cutting and Welding Required During Installation
Sterling Truck 827 1990
  • 2.7L V6 2675CC
  • Cutting and Welding Required During Installation
Sterling Truck 827 1991
  • 2.7L V6 2675CC
  • Cutting and Welding Required During Installation
Toyota Supra 1993
  • Rear
  • 3L L6 2997CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Toyota Supra 1994
  • Rear
  • 3L L6 2997CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Toyota Supra 1995
  • Rear
  • 3L L6 2997CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Toyota Supra 1996
  • Rear
  • 3L L6 2997CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Toyota Supra 1997
  • Rear
  • 3L L6 2997CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Toyota Supra 1998
  • Rear
  • 3L L6 2997CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Volkswagen Cabriolet 1991
  • 1.8L L4 1781CC
  • Cutting and Welding Required During Installation
Volkswagen Cabriolet 1992
  • 1.8L L4 1781CC
  • Cutting and Welding Required During Installation
Volkswagen Cabriolet 1993
  • 1.8L L4 1781CC
  • Cutting and Welding Required During Installation
Volkswagen Golf 1995
  • 2.8L V6
  • Cutting and Welding Required During Installation
Volvo 242 1981
  • 2.1L L4 2127CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Volvo 242 1982
  • 2.1L L4 2127CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Volvo 242 1983
  • 2.1L L4 2127CC
  • Cutting and Welding Required During Installation
Volvo 242 1984
  • 2.1L L4 2127CC
  • Cutting and Welding Required During Installation
Volvo 244 1982
  • 2.1L L4 2127CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Volvo 244 1983
  • 2.1L L4 2127CC
  • Cutting and Welding Required During Installation
Volvo 244 1984
  • 2.1L L4 2127CC
  • Cutting and Welding Required During Installation
Volvo 245 1981
  • 2.1L L4 2127CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Volvo 245 1982
  • 2.1L L4 2127CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Volvo 245 1983
  • 2.1L L4 2127CC
  • Cutting and Welding Required During Installation
Volvo 245 1984
  • 2.1L L4 2127CC
  • Cutting and Welding Required During Installation
Volvo 245 1985
  • 2.1L L4 2127CC
  • Cutting and Welding Required During Installation