100% CANADIAN BASED 100% CANADIAN
NO DUTIES OR CUSTOMS FEES NO CUSTOMS FEES
AUTHORIZED DEALER AUTH. DEALER
30-DAY HASSLE-FREE RETURNS 30-DAY RETURNS

MagnaFlowStainless Federal Catalytic Converter without Sensor Port (2.5" IN\/2.5" OUT)

AUTHORIZED DEALER

91006

Manufacturer Part Number
*Images are for illustrative purpose only. Actual Product may differ.
SKU: MAG-91006
Please select a vehicle to verify fitment.

Please Select a Vehicle

This will be used to show you compatible parts.

Auto Parts Finder

This product doesn't fit your selection!

The product shown on this page is not compatible with the selected vehicle

!
To ensure proper parts fitment, please browse compatible products or change your selection.


Change Current Selection
FREE Shipping*
Standard Warranty

Pedido Especial
1-3 Semanas
CA $137.00
Stainless Federal Catalytic Converter without Sensor Port (2.5" IN\/2.5" OUT) is available to buy in increments of 1
AUTHORIZED DEALER

91006

Manufacturer Part Number
More Information
Fabricante MagnaFlow
Número de Pieza del Fabricante 91006
Precio de Venta Sugerido por el Fabricante (MSRP) 105.52
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
This table represents all the 225 compatible vehicles for this part:
Make Model Year
Application Notes
Position Transmission Body Type Drive Type Engine Aspiration Additional Information
Buick LeSabre 1995
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick Park Avenue 1995
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick Regal 1990
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick Regal 1991
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick Regal 1992
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick Regal 1993
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Chevrolet Camaro 1993
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Chevrolet Camaro 1994
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Chevrolet Camaro 1995
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Chevrolet Lumina 1991
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Chevrolet Lumina 1992
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Chevrolet Lumina 1993
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Chevrolet Lumina 1994
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Chevrolet Lumina 1995
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Chevrolet Lumina APV 1992
  • 3.8L V6 3800CC/231CID
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Chevrolet Monte Carlo 1995
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Chevrolet Spectrum 1985
  • 1.5L L4 1471CC/92cCID
  • Cutting and Welding Required During Installation
Chevrolet Spectrum 1986
  • 1.5L L4 1471CC/92cCID
  • Cutting and Welding Required During Installation
Chevrolet Spectrum 1987
  • 1.5L L4 1471CC/92cCID
  • Cutting and Welding Required During Installation
Chevrolet Spectrum 1988
  • Rear
  • 1.5L L4 1471CC/92cCID
  • Cutting and Welding Required During Installation
Chrysler Daytona 1988
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
  • CAN
Chrysler Daytona 1989
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
  • CAN
Chrysler Daytona 1990
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
  • CAN
Chrysler Imperial 1990
  • 3.3L V6 3301CC/201CID
  • Cutting and Welding Required During Installation
Chrysler Imperial 1991
  • 3.3L V6 3301CC/201CID
  • 3.8L V6 3778CC/231CID
  • Cutting and Welding Required During Installation
Chrysler LeBaron 1987
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Chrysler LeBaron 1988
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Chrysler LeBaron 1989
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Chrysler LeBaron 1990
  • 2.5L L4 2507CC/153CID
  • 3L V6 2972CC/181CID
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Chrysler LeBaron 1991
  • 2.5L L4 2507CC/153CID
  • 3L V6 2972CC/181CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Chrysler LeBaron 1992
  • 2.5L L4 2507CC/153CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Chrysler New Yorker 1988
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Chrysler New Yorker 1989
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Chrysler New Yorker 1990
  • 3.3L V6 3301CC/201CID
  • Cutting and Welding Required During Installation
Chrysler Town & Country 1987
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Chrysler Town & Country 1988
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge 600 1986
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge 600 1987
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge 600 1988
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge Dakota 1994
  • Standard Cab Pickup
  • 4WD
  • RWD
  • 3.9L V6 3906CC/239CID
  • 78
  • Cutting and Welding Required During Installation
Dodge Dakota 1995
  • Standard Cab Pickup
  • 4WD
  • RWD
  • 3.9L V6 3906CC/239CID
  • 78
  • Cutting and Welding Required During Installation
Dodge Daytona 1987
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge Daytona 1988
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge Daytona 1989
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge Daytona 1990
  • 2.5L L4 2507CC/153CID
  • 3L V6 2972CC/181CID
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge Daytona 1991
  • 2.5L L4 2507CC/153CID
  • 3L V6 2972CC/181CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge Daytona 1992
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge Daytona 1993
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge Dynasty 1988
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge Dynasty 1989
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge Dynasty 1990
  • 3.3L V6 3301CC/201CID
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge Dynasty 1991
  • 3.3L V6 3301CC/201CID
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge Dynasty 1992
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge Dynasty 1993
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge Lancer 1989
  • 2.5L L4 2507CC/153CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge Neon 1995
  • 2L L4 1996CC/122CID
  • Cutting and Welding Required During Installation
Dodge Shadow 1988
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge Spirit 1989
  • 2.5L L4 2507CC/153CID
  • 3L V6 2972CC/181CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge Spirit 1990
  • 2.5L L4 2507CC/153CID
  • 3L V6 2972CC/181CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge Spirit 1991
  • 2.5L L4 2507CC/153CID
  • 3L V6 2972CC/181CID
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge Spirit 1992
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge W150 1982
  • Rear
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Dodge W150 1983
  • Rear
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Dodge W150 1984
  • Rear
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge W250 1982
  • Rear
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge W250 1983
  • Rear
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Dodge W250 1984
  • Rear
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Ford Bronco II 1986
  • Rear
  • 2.9L V6 177CID
  • Cutting and Welding Required During Installation
Ford Bronco II 1987
  • Rear
  • 2.9L V6 177CID
  • Cutting and Welding Required During Installation
Ford E-100 Econoline 1975
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford E-100 Econoline 1976
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford E-100 Econoline 1977
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford E-100 Econoline 1978
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford Explorer 1991
  • Front
  • Rear
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford Explorer 1992
  • Front
  • Rear
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford Explorer 1993
  • Front
  • Rear
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford Explorer 1994
  • Front
  • Rear
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford F-100 1977
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford F-100 1978
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford F-100 1979
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford Ranger 1986
  • Rear
  • 2.9L V6 177CID
  • Cutting and Welding Required During Installation
Ford Ranger 1987
  • Rear
  • 2.9L V6 177CID
  • Cutting and Welding Required During Installation
Ford Ranger 1989
  • Rear
  • Extended Cab Pickup
  • 2.9L V6 177CID
  • Cutting and Welding Required During Installation
Ford Ranger 1990
  • Front
  • Rear
  • 2.9L V6 177CID
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford Ranger 1991
  • Front
  • Rear
  • 2.9L V6 177CID
  • 4L V6 245CID
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Ford Ranger 1992
  • Front
  • Rear
  • 2.9L V6 177CID
  • 4L V6 245CID
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Ford Ranger 1993
  • Front
  • Rear
  • 4L V6 245CID
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Ford Ranger 1994
  • Front
  • Rear
  • 4L V6 245CID
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Ford Thunderbird 1987
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Ford Thunderbird 1988
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Geo Spectrum 1989
  • Rear
  • 1.5L L4 1471CC/92cCID
  • Cutting and Welding Required During Installation
Geo Storm 1992
  • 1.8L L4 1817CC
  • 1.6L L4 1588CC/98cCID
  • Cutting and Welding Required During Installation
Geo Storm 1993
  • 1.8L L4 1817CC
  • 1.6L L4 1588CC/98cCID
  • Cutting and Welding Required During Installation
Isuzu Amigo 1989
  • 2.3L L4 2254CC
  • 2.6L L4 2559CC
  • Cutting and Welding Required During Installation
Isuzu Amigo 1990
  • 2.3L L4 2254CC
  • 2.6L L4 2559CC
  • Cutting and Welding Required During Installation
Isuzu Amigo 1991
  • 2.3L L4 2254CC
  • 2.6L L4 2559CC
  • Cutting and Welding Required During Installation
Isuzu Amigo 1992
  • 2.3L L4 2254CC
  • 2.6L L4 2559CC
  • Cutting and Welding Required During Installation
Isuzu Amigo 1993
  • 2.3L L4 2254CC
  • 2.6L L4 2559CC
  • Cutting and Welding Required During Installation
Isuzu Amigo 1994
  • 2.6L L4 2559CC
  • Cutting and Welding Required During Installation
Isuzu I-Mark 1981
  • 1.8L L4 1817CC
  • Cutting and Welding Required During Installation
Isuzu I-Mark 1982
  • 1.8L L4 1817CC
  • Cutting and Welding Required During Installation
Isuzu I-Mark 1983
  • 1.8L L4 1817CC
  • Cutting and Welding Required During Installation
Isuzu I-Mark 1984
  • 1.8L L4 1817CC
  • Cutting and Welding Required During Installation
Isuzu I-Mark 1985
  • 1.8L L4 1817CC
  • 1.5L L4 1471CC
  • GAS
  • Cutting and Welding Required During Installation
Isuzu I-Mark 1986
  • 1.5L L4 1471CC
  • Cutting and Welding Required During Installation
Isuzu I-Mark 1987
  • Rear
  • 1.5L L4 1471CC
  • Cutting and Welding Required During Installation
Isuzu I-Mark 1988
  • Rear
  • 1.5L L4 1471CC
  • Cutting and Welding Required During Installation
Isuzu I-Mark 1989
  • Rear
  • 1.5L L4 1471CC
  • Cutting and Welding Required During Installation
Isuzu Impulse 1983
  • 1.9L L4 1949CC
  • Cutting and Welding Required During Installation
Isuzu Impulse 1984
  • 1.9L L4 1949CC
  • Cutting and Welding Required During Installation
Isuzu Impulse 1985
  • 1.9L L4 1949CC
  • 2L L4 1994CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Isuzu Impulse 1986
  • 1.9L L4 1949CC
  • 2L L4 1994CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Isuzu Impulse 1987
  • 1.9L L4 1949CC
  • 2L L4 1994CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Isuzu Impulse 1988
  • 2.3L L4 2254CC
  • 2L L4 1994CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Isuzu Impulse 1989
  • 2.3L L4 2254CC
  • 2L L4 1994CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Isuzu Impulse 1990
  • 1.6L L4 1588CC
  • Cutting and Welding Required During Installation
Isuzu Impulse 1991
  • Right
  • 1.6L L4 1588CC
  • Naturally Aspirated
  • Turbocharged
  • Cutting and Welding Required During Installation
Isuzu Impulse 1992
  • Rear
  • 1.6L L4 1588CC
  • 1.8L L4 1817CC
  • Cutting and Welding Required During Installation
Isuzu Pickup 1981
  • 1.8L L4 1817CC
  • Cutting and Welding Required During Installation
Isuzu Pickup 1982
  • 1.8L L4 1817CC
  • Cutting and Welding Required During Installation
Isuzu Pickup 1983
  • 1.9L L4 1949CC
  • Cutting and Welding Required During Installation
Isuzu Pickup 1984
  • 1.9L L4 1949CC
  • Cutting and Welding Required During Installation
Isuzu Pickup 1985
  • 1.9L L4 1949CC
  • Cutting and Welding Required During Installation
Isuzu Pickup 1986
  • 2.3L L4 2254CC
  • 1.9L L4 1949CC
  • Cutting and Welding Required During Installation
Isuzu Pickup 1987
  • 2.3L L4 2254CC
  • 1.9L L4 1949CC
  • Cutting and Welding Required During Installation
Isuzu Pickup 1988
  • 2.3L L4 2254CC
  • 2.6L L4 2559CC
  • Cutting and Welding Required During Installation
  • CAN
Isuzu Pickup 1989
  • 2.3L L4 2254CC
  • 2.6L L4 2559CC
  • Cutting and Welding Required During Installation
Isuzu Pickup 1990
  • 2.3L L4 2254CC
  • 2.6L L4 2559CC
  • Cutting and Welding Required During Installation
Isuzu Pickup 1991
  • 2.3L L4 2254CC
  • 2.6L L4 2559CC
  • 3.1L V6 3137CC
  • Cutting and Welding Required During Installation
Isuzu Pickup 1992
  • 2.3L L4 2254CC
  • 2.6L L4 2559CC
  • 3.1L V6 3137CC
  • Cutting and Welding Required During Installation
Isuzu Pickup 1993
  • Rear
  • 2.3L L4 2254CC
  • 2.6L L4 2559CC
  • 3.1L V6 3137CC
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
  • California Emissions Equipped Vehicles Registered Outside Of California
Isuzu Pickup 1994
  • Rear
  • 2.3L L4 2254CC
  • 2.6L L4 2559CC
  • 3.1L V6 3137CC
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
  • California Emissions Equipped Vehicles Registered Outside Of California
Isuzu Pickup 1995
  • Rear
  • 2.3L L4 2254CC
  • 2.6L L4 2559CC
  • Cutting and Welding Required During Installation
Isuzu Rodeo 1991
  • 2.6L L4 2559CC
  • 3.1L V6 3137CC
  • Cutting and Welding Required During Installation
Isuzu Rodeo 1992
  • 2.6L L4 2559CC
  • 3.1L V6 3137CC
  • Cutting and Welding Required During Installation
Isuzu Rodeo 1993
  • Rear
  • 2.6L L4 2559CC
  • 3.2L V6 3165CC
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
  • California Emissions Equipped Vehicles Registered Outside Of California
Isuzu Rodeo 1994
  • Rear
  • 2.6L L4 2559CC
  • Cutting and Welding Required During Installation
Isuzu Rodeo 1995
  • Rear
  • 2.6L L4 2559CC
  • Cutting and Welding Required During Installation
Isuzu Trooper 1984
  • 1.9L L4 1949CC
  • Cutting and Welding Required During Installation
Isuzu Trooper 1985
  • 1.9L L4 1949CC
  • Cutting and Welding Required During Installation
Isuzu Trooper 1986
  • 2.3L L4 2254CC
  • Cutting and Welding Required During Installation
Isuzu Trooper 1987
  • 2.3L L4 2254CC
  • Cutting and Welding Required During Installation
Isuzu Trooper 1988
  • 2.6L L4 2559CC
  • Cutting and Welding Required During Installation
Isuzu Trooper 1989
  • 2.6L L4 2559CC
  • 2.8L V6 2827CC
  • Cutting and Welding Required During Installation
Isuzu Trooper 1990
  • 2.6L L4 2559CC
  • 2.8L V6 2827CC
  • Cutting and Welding Required During Installation
Isuzu Trooper 1991
  • 2.6L L4 2559CC
  • 2.8L V6 2827CC
  • Cutting and Welding Required During Installation
Isuzu Trooper 1994
  • Rear
  • 3.2L V6 3165CC
  • Cutting and Welding Required During Installation
Isuzu Trooper 1995
  • Rear
  • 3.2L V6 3165CC
  • Cutting and Welding Required During Installation
Jeep Cherokee 1979
  • 4.2L L6 258CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Jeep Cherokee 1980
  • 4.2L L6 258CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Jeep Cherokee 1981
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
Jeep CJ5 1979
  • 4.2L L6 258CID
  • 5L V8 304CID
  • Cutting and Welding Required During Installation
Jeep CJ5 1980
  • 4.2L L6 258CID
  • 5L V8 304CID
  • 2.5L L4 151CID
  • Cutting and Welding Required During Installation
Jeep CJ5 1981
  • 4.2L L6 258CID
  • 2.5L L4 151CID
  • Cutting and Welding Required During Installation
Jeep CJ5 1982
  • 2.5L L4 151CID
  • Cutting and Welding Required During Installation
Jeep CJ5 1983
  • 2.5L L4 151CID
  • Cutting and Welding Required During Installation
Jeep Scrambler 1981
  • 4.2L L6 258CID
  • 2.5L L4 151CID
  • Cutting and Welding Required During Installation
Jeep Scrambler 1982
  • 2.5L L4 151CID
  • Cutting and Welding Required During Installation
Jeep Scrambler 1983
  • 2.5L L4 151CID
  • Cutting and Welding Required During Installation
Jeep Wagoneer 1979
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Jeep Wagoneer 1980
  • 4.2L L6 258CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Jeep Wagoneer 1981
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
Lexus ES300 1992
  • 3L V6 2959CC
  • Cutting and Welding Required During Installation
Lexus ES300 1993
  • 3L V6 2959CC
  • Cutting and Welding Required During Installation
Mazda 929 1992
  • Rear
  • 3L V6 2954CC/180CID
  • Cutting and Welding Required During Installation
Mazda 929 1993
  • Rear
  • 3L V6 2954CC/180CID
  • Cutting and Welding Required During Installation
Mazda 929 1994
  • Rear
  • 3L V6 2954CC/180CID
  • Cutting and Welding Required During Installation
Mazda 929 1995
  • Rear
  • 3L V6 2954CC/180CID
  • Cutting and Welding Required During Installation
Mazda Navajo 1991
  • Front
  • Rear
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Mazda Navajo 1992
  • Front
  • Rear
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Mazda Navajo 1993
  • Front
  • Rear
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Mazda Navajo 1994
  • Front
  • Rear
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Supreme 1992
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Supreme 1993
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Supreme 1994
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Supreme 1995
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Oldsmobile Silhouette 1992
  • 3.8L V6 3800CC/231CID
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Plymouth Acclaim 1989
  • 2.5L L4 2507CC/153CID
  • 3L V6 2972CC/181CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Plymouth Acclaim 1990
  • 2.5L L4 2507CC/153CID
  • 3L V6 2972CC/181CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Plymouth Acclaim 1991
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Plymouth Grand Voyager 1991
  • 3.3L V6 3301CC/201CID
  • Cutting and Welding Required During Installation
Plymouth Neon 1995
  • 2L L4 1996CC/122CID
  • Cutting and Welding Required During Installation
Plymouth Sundance 1988
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Pontiac Bonneville 1995
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Pontiac Firebird 1993
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Pontiac Firebird 1994
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Pontiac Firebird 1995
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Pontiac Grand Prix 1991
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Pontiac Grand Prix 1992
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Pontiac Grand Prix 1993
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Pontiac Grand Prix 1994
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Pontiac Grand Prix 1995
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Pontiac Trans Sport 1992
  • 3.8L V6 3800CC/231CID
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Porsche 944 1986
  • 2.5L L4 2475CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Porsche 944 1987
  • 2.5L L4 2475CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Porsche 944 1988
  • 2.5L L4 2475CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Porsche 944 1989
  • 2.5L L4 2475CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Volvo 740 1985
  • 2.3L L4 2316CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Volvo 740 1986
  • 2.3L L4 2316CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Volvo 740 1987
  • 2.3L L4 2316CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Volvo 740 1988
  • 2.3L L4 2316CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Volvo 740 1989
  • 2.3L L4 2316CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Volvo 740 1990
  • 2.3L L4 2316CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Volvo 740 1991
  • 2.3L L4 2316CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Volvo 740 1992
  • 2.3L L4 2316CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Volvo 745 1985
  • 2.3L L4 2316CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Volvo 760 1984
  • 2.3L L4 2316CC
  • Cutting and Welding Required During Installation
Volvo 760 1985
  • 2.3L L4 2316CC
  • Cutting and Welding Required During Installation
Volvo 760 1986
  • 2.3L L4 2316CC
  • Cutting and Welding Required During Installation
Volvo 760 1987
  • 2.8L V6 2849CC
  • 2.3L L4 2316CC
  • Cutting and Welding Required During Installation
Volvo 760 1988
  • 2.8L V6 2849CC
  • 2.3L L4 2316CC
  • Cutting and Welding Required During Installation
Volvo 760 1989
  • 2.8L V6 2849CC
  • 2.3L L4 2316CC
  • Cutting and Welding Required During Installation
Volvo 760 1990
  • 2.8L V6 2849CC
  • 2.3L L4 2316CC
  • Cutting and Welding Required During Installation
Volvo 780 1987
  • 2.8L V6 2849CC
  • Cutting and Welding Required During Installation
Volvo 780 1988
  • 2.8L V6 2849CC
  • Cutting and Welding Required During Installation
Volvo 780 1989
  • 2.8L V6 2849CC
  • Cutting and Welding Required During Installation
Volvo 780 1990
  • 2.8L V6 2849CC
  • Cutting and Welding Required During Installation
Volvo 850 1993
  • 2.4L L5 2435CC
  • Cutting and Welding Required During Installation
Volvo 850 1994
  • 2.3L L5 2319CC
  • 2.4L L5 2435CC
  • Cutting and Welding Required During Installation
Volvo 850 1995
  • Automatic
  • 2.3L L5 2319CC
  • 2.4L L5 2435CC
  • Cutting and Welding Required During Installation
Volvo 940 1991
  • 2.3L L4 2316CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Volvo 940 1992
  • 2.3L L4 2316CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Volvo 940 1993
  • 2.3L L4 2316CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Volvo 940 1994
  • 2.3L L4 2316CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Volvo 940 1995
  • 2.3L L4 2316CC
  • Turbocharged
  • Cutting and Welding Required During Installation