100% CANADIAN BASED 100% CANADIAN
NO DUTIES OR CUSTOMS FEES NO CUSTOMS FEES
AUTHORIZED DEALER AUTH. DEALER
30-DAY HASSLE-FREE RETURNS 30-DAY RETURNS

MagnaFlowStainless Federal OEM Grade Catalytic Converter without Sensor Port (2.5" IN\/2.5" OUT)

AUTHORIZED DEALER

51206

Manufacturer Part Number
*Images are for illustrative purpose only. Actual Product may differ.
SKU: MAG-51206
Please select a vehicle to verify fitment.

Please Select a Vehicle

This will be used to show you compatible parts.

Auto Parts Finder

This product doesn't fit your selection!

The product shown on this page is not compatible with the selected vehicle

!
To ensure proper parts fitment, please browse compatible products or change your selection.


Change Current Selection
FREE Shipping*
Standard Warranty

Pedido Especial
1-3 Semanas
CA $266.00
Stainless Federal OEM Grade Catalytic Converter without Sensor Port (2.5" IN\/2.5" OUT) is available to buy in increments of 1
AUTHORIZED DEALER

51206

Manufacturer Part Number
More Information
Fabricante MagnaFlow
Número de Pieza del Fabricante 51206
Precio de Venta Sugerido por el Fabricante (MSRP) 169.09
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
This table represents all the 533 compatible vehicles for this part:
Make Model Year
Application Notes
Position Submodel Transmission Drive Type Engine Aspiration Additional Information
Acura MDX 2007
  • 3.7L V6 3664CC
  • Cutting and Welding Required During Installation
Acura MDX 2008
  • 3.7L V6 3664CC
  • Cutting and Welding Required During Installation
Acura MDX 2009
  • 3.7L V6 3664CC
  • Cutting and Welding Required During Installation
Acura MDX 2010
  • 3.7L V6 3664CC
  • Cutting and Welding Required During Installation
Acura MDX 2011
  • 3.7L V6 3664CC
  • Cutting and Welding Required During Installation
Acura MDX 2012
  • 3.7L V6 3664CC
  • Cutting and Welding Required During Installation
Acura MDX 2013
  • 3.7L V6 3664CC
  • Cutting and Welding Required During Installation
Acura RDX 2007
  • Rear
  • 2.3L L4 2300CC
  • Cutting and Welding Required During Installation
Acura RDX 2008
  • Rear
  • 2.3L L4 2300CC
  • Cutting and Welding Required During Installation
Acura RDX 2009
  • Rear
  • 2.3L L4 2300CC
  • Cutting and Welding Required During Installation
Acura RDX 2010
  • Rear
  • 2.3L L4 2300CC
  • Cutting and Welding Required During Installation
Acura RDX 2011
  • Rear
  • 2.3L L4 2300CC
  • Cutting and Welding Required During Installation
Acura RDX 2012
  • Rear
  • 2.3L L4 2300CC
  • Cutting and Welding Required During Installation
Acura TL 2009
  • 3.5L V6 3471CC
  • Cutting and Welding Required During Installation
Acura TL 2010
  • 3.5L V6 3471CC
  • Cutting and Welding Required During Installation
Acura TL 2011
  • 3.5L V6 3471CC
  • Cutting and Welding Required During Installation
Acura TL 2012
  • 3.5L V6 3471CC
  • Cutting and Welding Required During Installation
Acura TL 2013
  • 3.5L V6 3471CC
  • Cutting and Welding Required During Installation
Acura TL 2014
  • 3.5L V6 3471CC
  • Cutting and Welding Required During Installation
Acura TSX 2010
  • 3.5L V6 3471CC
  • Cutting and Welding Required During Installation
Acura TSX 2011
  • 3.5L V6 3471CC
  • Cutting and Welding Required During Installation
Acura TSX 2012
  • 3.5L V6 3471CC
  • Cutting and Welding Required During Installation
Acura TSX 2013
  • 3.5L V6 3471CC
  • Cutting and Welding Required During Installation
Acura TSX 2014
  • 3.5L V6 3471CC
  • Cutting and Welding Required During Installation
Acura ZDX 2010
  • 3.7L V6 3664CC
  • Cutting and Welding Required During Installation
Acura ZDX 2011
  • 3.7L V6 3664CC
  • Cutting and Welding Required During Installation
Acura ZDX 2012
  • 3.7L V6 3664CC
  • Cutting and Welding Required During Installation
Acura ZDX 2013
  • 3.7L V6 3664CC
  • Cutting and Welding Required During Installation
Aston Martin DB7 2000
  • Front Left
  • Front Right
  • Rear Left
  • Rear Right
  • 6L V12 5935CC
Aston Martin DB7 2001
  • Front Left
  • Front Right
  • Rear Left
  • Rear Right
  • 6L V12 5935CC
Aston Martin DB7 2002
  • Front Left
  • Front Right
  • Rear Left
  • Rear Right
  • 6L V12 5935CC
Aston Martin DB7 2003
  • Front Left
  • Front Right
  • Rear Left
  • Rear Right
  • 6L V12 5935CC
Aston Martin DB7 2004
  • Front Left
  • Front Right
  • Rear Left
  • Rear Right
  • 6L V12 5935CC
Audi A3 Quattro 2009
  • Rear
  • 2L L4 1984CC/121CID
  • Cutting and Welding Required During Installation
Audi A3 Quattro 2010
  • Rear
  • 2L L4 1984CC/121CID
  • Cutting and Welding Required During Installation
Audi A3 Quattro 2011
  • Rear
  • 2L L4 1984CC/121CID
  • Cutting and Welding Required During Installation
Audi A3 Quattro 2012
  • Rear
  • 2L L4 1984CC/121CID
  • Cutting and Welding Required During Installation
Audi A3 Quattro 2013
  • Rear
  • 2L L4 1984CC/121CID
  • Cutting and Welding Required During Installation
Audi A6 Quattro 2000
  • Front Right
  • Front Left
  • 2.7L V6 2671CC
  • Cutting and Welding Required During Installation
Audi A6 Quattro 2002
  • Front Right
  • Front Left
  • 2.7L V6 2671CC
  • Cutting and Welding Required During Installation
Audi A8 Quattro 1997
  • Right
  • Left
  • 4.2L V8 4172CC
  • Cutting and Welding Required During Installation
Audi A8 Quattro 1998
  • Right
  • Left
  • 4.2L V8 4172CC
  • Cutting and Welding Required During Installation
Audi A8 Quattro 1999
  • Right
  • Left
  • 4.2L V8 4172CC
  • Cutting and Welding Required During Installation
Audi A8 Quattro 2000
  • Right
  • Left
  • 4.2L V8 4172CC
  • Cutting and Welding Required During Installation
Audi A8 Quattro 2001
  • Right
  • Left
  • 4.2L V8 4172CC
  • Cutting and Welding Required During Installation
Audi A8 Quattro 2002
  • Right
  • Left
  • 4.2L V8 4172CC
  • Cutting and Welding Required During Installation
Audi A8 Quattro 2003
  • Right
  • Left
  • 4.2L V8 4172CC
  • Cutting and Welding Required During Installation
Audi A8 Quattro 2004
  • Right
  • Left
  • 4.2L V8 4172CC
  • Cutting and Welding Required During Installation
Audi A8 Quattro 2005
  • Right
  • Left
  • 4.2L V8 4172CC
  • Cutting and Welding Required During Installation
Audi A8 Quattro 2006
  • Left
  • Right
  • 4.2L V8 4172CC
  • Cutting and Welding Required During Installation
Audi A3 2006
  • 2L L4 1984CC/121CID
  • Cutting and Welding Required During Installation
Audi A3 2007
  • 2L L4 1984CC/121CID
  • Cutting and Welding Required During Installation
Audi A3 2008
  • 2L L4 1984CC/121CID
  • Cutting and Welding Required During Installation
Audi A3 2009
  • 2L L4 1984CC/121CID
  • Cutting and Welding Required During Installation
Audi A3 2010
  • Base
  • 2L L4 1984CC/121CID
  • Cutting and Welding Required During Installation
Audi A3 2011
  • Base
  • 2L L4 1984CC/121CID
  • Cutting and Welding Required During Installation
Audi A3 2012
  • Base
  • 2L L4 1984CC/121CID
  • Cutting and Welding Required During Installation
Audi A3 2013
  • Base
  • 2L L4 1984CC/121CID
  • Cutting and Welding Required During Installation
BMW 335i 2007
  • Rear Right
  • Rear Left
  • 3L L6 2979CC
  • Cutting and Welding Required During Installation
BMW 335i 2008
  • Rear Right
  • Rear Left
  • 3L L6 2979CC
  • Cutting and Welding Required During Installation
BMW 335i 2009
  • Rear Left
  • Rear Right
  • 3L L6 2979CC
  • Cutting and Welding Required During Installation
BMW 335i 2010
  • Rear Right
  • Rear Left
  • 3L L6 2979CC
  • Cutting and Welding Required During Installation
BMW 335is 2011
  • Rear Right
  • Rear Left
  • 3L L6 2979CC
  • Cutting and Welding Required During Installation
BMW 335is 2012
  • Rear Right
  • Rear Left
  • 3L L6 2979CC
  • Cutting and Welding Required During Installation
BMW 335is 2013
  • Rear Right
  • Rear Left
  • 3L L6 2979CC
  • Cutting and Welding Required During Installation
BMW 335i xDrive 2009
  • Rear Left
  • Rear Right
  • 3L L6 2979CC
  • Cutting and Welding Required During Installation
BMW 335i xDrive 2010
  • Rear Left
  • Rear Right
  • 3L L6 2979CC
  • Cutting and Welding Required During Installation
BMW 335xi 2007
  • Rear Right
  • Rear Left
  • 3L L6 2979CC
  • Cutting and Welding Required During Installation
BMW 335xi 2008
  • Rear Right
  • Rear Left
  • 3L L6 2979CC
  • Cutting and Welding Required During Installation
BMW 535i 2008
  • Rear Right
  • Rear Left
  • 3L L6 2979CC
  • Cutting and Welding Required During Installation
BMW 535i 2009
  • Rear Right
  • Rear Left
  • 3L L6 2979CC
  • Cutting and Welding Required During Installation
BMW 535i 2010
  • Rear Left
  • Rear Right
  • 3L L6 2979CC
  • Cutting and Welding Required During Installation
BMW 535i xDrive 2009
  • Rear Left
  • Rear Right
  • 3L L6 2979CC
  • Cutting and Welding Required During Installation
BMW 535i xDrive 2010
  • Rear Right
  • Rear Left
  • 3L L6 2979CC
  • Cutting and Welding Required During Installation
BMW 535xi 2008
  • Rear Left
  • Rear Right
  • 3L L6 2979CC
  • Cutting and Welding Required During Installation
BMW M5 2000
  • Left
  • Right
  • 5L V8 4941CC
  • Cutting and Welding Required During Installation
BMW M5 2001
  • Left
  • Right
  • 5L V8 4941CC
  • Cutting and Welding Required During Installation
BMW M5 2002
  • Left
  • Right
  • 5L V8 4941CC
  • Cutting and Welding Required During Installation
BMW M5 2003
  • Left
  • Right
  • 5L V8 4941CC
  • Cutting and Welding Required During Installation
BMW M5 2006
  • Right
  • Left
  • 5L V10 4999CC
  • Cutting and Welding Required During Installation
BMW M5 2007
  • Right
  • Left
  • 5L V10 4999CC
  • Cutting and Welding Required During Installation
BMW M5 2008
  • Right
  • Left
  • 5L V10 4999CC
  • Cutting and Welding Required During Installation
BMW M5 2009
  • Right
  • Left
  • 5L V10 4999CC
  • Cutting and Welding Required During Installation
BMW M5 2010
  • Right
  • Left
  • 5L V10 4999CC
  • Cutting and Welding Required During Installation
BMW M6 2006
  • Left
  • Right
  • 5L V10 4999CC
  • Cutting and Welding Required During Installation
BMW M6 2007
  • Left
  • Right
  • 5L V10 4999CC
  • Cutting and Welding Required During Installation
BMW M6 2008
  • Left
  • Right
  • 5L V10 4999CC
  • Cutting and Welding Required During Installation
BMW M6 2009
  • Left
  • Right
  • 5L V10 4999CC
  • Cutting and Welding Required During Installation
BMW M6 2010
  • Left
  • Right
  • 5L V10 4999CC
  • Cutting and Welding Required During Installation
Buick LaCrosse 2006
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick LaCrosse 2007
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick LaCrosse 2008
  • 3.8L V6 3800CC/231CID
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
Buick LaCrosse 2009
  • 3.8L V6 3800CC/231CID
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
Buick Lucerne 2006
  • 3.8L V6 3800CC/231CID
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Buick Lucerne 2007
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Buick Lucerne 2008
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Buick Regal 2014
  • Rear
  • 2L L4 1998CC/122CID
Buick Regal 2015
  • Rear
  • 2L L4 1998CC/122CID
Chevrolet Blazer 2001
  • Front
  • RWD
  • 4.3L V6 262CID
  • 4
  • Cutting and Welding Required During Installation
Chevrolet Blazer 2002
  • Front
  • RWD
  • 4.3L V6 262CID
  • 4
  • Cutting and Welding Required During Installation
Chevrolet Blazer 2003
  • Front
  • RWD
  • 4.3L V6 262CID
  • 4
  • Cutting and Welding Required During Installation
Chevrolet Blazer 2004
  • Front
  • RWD
  • 4.3L V6 262CID
  • 4
  • Cutting and Welding Required During Installation
Chevrolet Blazer 2005
  • Front
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet Camaro 2010
  • Right
  • Left
  • Rear Left
  • Rear Right
  • 6.2L V8 6162CC/376CID
  • 3.6L V6 3564CC/217CID
  • Cutting and Welding Required During Installation
Chevrolet Camaro 2011
  • Right
  • Left
  • Rear Left
  • Rear Right
  • 6.2L V8 6162CC/376CID
  • 3.6L V6 3564CC/217CID
  • Cutting and Welding Required During Installation
Chevrolet Camaro 2012
  • Right
  • Left
  • Rear Right
  • Rear Left
  • 6.2L V8 6162CC/376CID
  • 3.6L V6 3564CC/217CID
  • Cutting and Welding Required During Installation
Chevrolet Camaro 2013
  • Rear Right
  • Rear Left
  • 3.6L V6 3564CC/217CID
  • Cutting and Welding Required During Installation
Chevrolet Camaro 2014
  • Rear Right
  • Rear Left
  • 3.6L V6 3564CC/217CID
  • Cutting and Welding Required During Installation
Chevrolet Colorado 2010
  • 2.9L L4
  • 3.7L L5
  • Cutting and Welding Required During Installation
Chevrolet Colorado 2011
  • 2.9L L4
  • 3.7L L5
  • Cutting and Welding Required During Installation
Chevrolet Colorado 2012
  • 2.9L L4
  • 3.7L L5
  • Cutting and Welding Required During Installation
Chevrolet Corvette 1997
  • Right
  • Left
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet Corvette 1998
  • Right
  • Left
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet Corvette 1999
  • Right
  • Left
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet Corvette 2000
  • Right
  • Left
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet Corvette 2001
  • Right
  • Left
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet Corvette 2002
  • Right
  • Left
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet Corvette 2003
  • Right
  • Left
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet Corvette 2004
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet Corvette 2005
  • Left
  • Right
  • 6L V8 5967CC/364CID
  • Cutting and Welding Required During Installation
Chevrolet Corvette 2006
  • Left
  • Right
  • Base
  • 6L V8 5967CC/364CID
  • Cutting and Welding Required During Installation
Chevrolet Corvette 2007
  • Left
  • Right
  • Base
  • 6L V8 5967CC/364CID
  • Cutting and Welding Required During Installation
Chevrolet Corvette 2008
  • Right
  • Left
  • 6.2L V8 6162CC/376CID
  • Cutting and Welding Required During Installation
Chevrolet Corvette 2009
  • Right
  • Left
  • 6.2L V8 6162CC/376CID
  • Cutting and Welding Required During Installation
Chevrolet Corvette 2010
  • Left
  • Right
  • Base
  • Grand Sport
  • 6.2L V8 6162CC/376CID
  • Cutting and Welding Required During Installation
Chevrolet Corvette 2011
  • Left
  • Right
  • Base
  • Grand Sport
  • 6.2L V8 6162CC/376CID
  • Cutting and Welding Required During Installation
Chevrolet Corvette 2012
  • Front Left
  • Front Right
  • Base
  • Grand Sport
  • 6.2L V8 6162CC/376CID
  • Cutting and Welding Required During Installation
Chevrolet Express 1500 2007
  • 4.3L V6 262CID
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
Chevrolet Express 1500 2008
  • 4.3L V6 262CID
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
Chevrolet Impala 2012
  • 3.6L V6 3564CC/217CID
  • Excluding Partial Zero Emissions Vehicles (PZEV)
  • Cutting and Welding Required During Installation
Chevrolet Impala 2013
  • 3.6L V6 3564CC/217CID
  • Excluding Partial Zero Emissions Vehicles (PZEV)
  • Cutting and Welding Required During Installation
Chevrolet Impala Limited 2014
  • 3.6L V6 3564CC/217CID
  • Excluding Partial Zero Emissions Vehicles (PZEV)
  • Cutting and Welding Required During Installation
Chevrolet Impala Limited 2015
  • 3.6L V6 3564CC/217CID
  • Excluding Partial Zero Emissions Vehicles (PZEV)
  • Cutting and Welding Required During Installation
Chevrolet Impala Limited 2016
  • 3.6L V6 3564CC/217CID
  • Excluding Partial Zero Emissions Vehicles (PZEV)
  • Cutting and Welding Required During Installation
Chevrolet Malibu 2009
  • Rear
  • 3.6L V6 3564CC/217CID
  • Cutting and Welding Required During Installation
Chevrolet Malibu 2010
  • Rear
  • 3.6L V6 3564CC/217CID
  • Cutting and Welding Required During Installation
Chevrolet Malibu 2011
  • Rear
  • 3.6L V6 3564CC/217CID
  • Cutting and Welding Required During Installation
Chevrolet Monte Carlo 2000
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Chevrolet S10 2001
  • Front
  • 4WD
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet S10 2002
  • Front
  • 4WD
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet S10 2003
  • Front
  • 4WD
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet Silverado 1500 2007
  • Right
  • Left
  • 6L V8 5967CC/364CID
  • Federal Emissions Equipped (Tier 1)
  • Cutting and Welding Required During Installation
Chevrolet Silverado 1500 2014
  • Front Left
  • Front Right
  • Rear
  • 4.3L V6 262CID
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
Chevrolet Silverado 1500 2015
  • Front Left
  • Front Right
  • Rear
  • 4.3L V6 262CID
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
Chevrolet Silverado 1500 2016
  • Front Left
  • Front Right
  • Rear
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet Suburban 2015
  • Front Left
  • Front Right
  • Rear
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
Chevrolet Tahoe 2015
  • Front Left
  • Front Right
  • Rear
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
Chevrolet Venture 2004
  • FWD
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Chevrolet Venture 2005
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Dodge Caravan 2005
  • 2.4L L4 2429CC/148CID
  • Cutting and Welding Required During Installation
Dodge Caravan 2006
  • 2.4L L4 2429CC/148CID
  • Cutting and Welding Required During Installation
Dodge Caravan 2007
  • 2.4L L4 2429CC/148CID
  • Cutting and Welding Required During Installation
Dodge Charger 2006
  • Right
  • Left
  • 2.7L V6 2700CC/167CID
  • 3.5L V6 3497CC/215CID
  • Cutting and Welding Required During Installation
Dodge Charger 2008
  • Left
  • Right
  • AWD
  • 5.7L V8 345CID
  • Cutting and Welding Required During Installation
Dodge Magnum 2005
  • Left
  • Right
  • RWD
  • 3.5L V6 3497CC/215CID
  • Cutting and Welding Required During Installation
Dodge Magnum 2006
  • Right
  • Left
  • RWD
  • 3.5L V6 3497CC/215CID
  • Cutting and Welding Required During Installation
Dodge Magnum 2008
  • Left
  • Right
  • AWD
  • 5.7L V8 345CID
  • Cutting and Welding Required During Installation
Dodge Ram 1500 Pickup 2002
  • Front Right
  • Front Left
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge Ram 1500 Pickup 2003
  • Front Right
  • Front Left
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge Ram 1500 Pickup 2010
  • 5.7L V8 345CID
  • Cutting and Welding Required During Installation
Dodge Viper 1996
  • Right
  • Left
  • 8L V10 7990CC/488CID
  • Cutting and Welding Required During Installation
Dodge Viper 1997
  • Right
  • Left
  • 8L V10 7990CC/488CID
  • Cutting and Welding Required During Installation
Dodge Viper 1998
  • Right
  • Left
  • 8L V10 7990CC/488CID
  • Cutting and Welding Required During Installation
Dodge Viper 1999
  • Right
  • Left
  • 8L V10 7990CC/488CID
  • Cutting and Welding Required During Installation
Dodge Viper 2000
  • Right
  • Left
  • 8L V10 7990CC/488CID
  • Cutting and Welding Required During Installation
Dodge Viper 2001
  • Right
  • Left
  • 8L V10 7990CC/488CID
  • Cutting and Welding Required During Installation
Dodge Viper 2002
  • Right
  • Left
  • 8L V10 7990CC/488CID
  • Cutting and Welding Required During Installation
Dodge Viper 2003
  • Right
  • Left
  • 8.3L V10 8275CC/505CID
  • Cutting and Welding Required During Installation
Dodge Viper 2004
  • Right
  • Left
  • 8.3L V10 8275CC/505CID
  • Cutting and Welding Required During Installation
Ford E-250 2003
  • Front Left
  • Front Right
  • 4.6L V8 281CID
  • To 8,500lbs. Gross Vehicle Weight
  • Cutting and Welding Required During Installation
Ford E-250 2004
  • Front Right
  • Front Left
  • 4.6L V8 281CID
  • To 8,500lbs. Gross Vehicle Weight
  • Cutting and Welding Required During Installation
Ford Explorer 2002
  • Front Left
  • Front Right
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Ford Explorer 2003
  • Front Left
  • Front Right
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Ford Explorer 2004
  • Front Right
  • Front Left
  • 4L V6 245CID
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Ford Explorer 2005
  • Left
  • Right
  • Front Left
  • Front Right
  • 4L V6 245CID
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Ford Explorer Sport Trac 2001
  • Front Left
  • Front Right
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford Explorer Sport Trac 2002
  • Front Left
  • Front Right
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford Explorer Sport Trac 2003
  • Front Left
  • Front Right
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford Explorer Sport Trac 2004
  • Front Left
  • Front Right
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford Explorer Sport Trac 2005
  • Front Left
  • Front Right
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford F-150 Heritage 2004
  • Front Left
  • Front Right
  • XL
  • XLT
  • Automatic
  • 4WD
  • 5.4L V8 330CID
  • Cutting and Welding Required During Installation
Ford F-150 2000
  • Right
  • 5.4L V8 330CID
  • Cutting and Welding Required During Installation
Ford Mustang 2008
  • Shelby GT500
  • 5.4L V8 330CID
  • Cutting and Welding Required During Installation
Ford Mustang 2009
  • Shelby GT500
  • 5.4L V8 330CID
  • Cutting and Welding Required During Installation
Ford Mustang 2011
  • Left
  • Right
  • 5L V8 4951CC/302CID
  • Cutting and Welding Required During Installation
Ford Ranger 2005
  • Rear
  • 4L V6 245CID
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Ford Ranger 2006
  • Rear
  • 4L V6 245CID
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
GMC Canyon 2004
  • RWD
  • 4WD
  • 2.8L L4 2770CC/169CID
  • 3.5L L5 3460CC/211CID
  • Cutting and Welding Required During Installation
GMC Canyon 2005
  • 2.8L L4 2770CC/169CID
  • 3.5L L5 3460CC/211CID
  • Cutting and Welding Required During Installation
GMC Canyon 2010
  • 2.9L L4
  • 3.7L L5
  • Cutting and Welding Required During Installation
GMC Canyon 2011
  • 2.9L L4
  • 3.7L L5
  • Cutting and Welding Required During Installation
GMC Canyon 2012
  • 2.9L L4
  • 3.7L L5
  • Cutting and Welding Required During Installation
GMC Jimmy 2000
  • Front
  • RWD
  • 4.3L V6 262CID
  • 4
  • Cutting and Welding Required During Installation
GMC Jimmy 2001
  • Front
  • RWD
  • 4.3L V6 262CID
  • 4
  • Cutting and Welding Required During Installation
GMC Jimmy 2002
  • Front
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
  • CAN
GMC Savana 1500 2007
  • 4.3L V6 262CID
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
GMC Savana 1500 2008
  • 4.3L V6 262CID
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
GMC Sierra 1500 2014
  • Front Left
  • Front Right
  • Rear
  • 4.3L V6 262CID
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
GMC Sierra 1500 2015
  • Front Left
  • Front Right
  • Rear
  • 4.3L V6 262CID
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
GMC Sierra 1500 2016
  • Front Left
  • Front Right
  • Rear
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC Sonoma 1996
  • 2.2L L4 2190CC/134CID
  • Cutting and Welding Required During Installation
GMC Sonoma 1997
  • 2.2L L4 2190CC/134CID
  • Cutting and Welding Required During Installation
GMC Sonoma 1998
  • 2.2L L4 2190CC/134CID
  • Cutting and Welding Required During Installation
GMC Sonoma 1999
  • 2.2L L4 2190CC/134CID
  • Cutting and Welding Required During Installation
GMC Sonoma 2000
  • 2.2L L4 2190CC/134CID
  • Cutting and Welding Required During Installation
GMC Sonoma 2001
  • 2.2L L4 2190CC/134CID
  • Cutting and Welding Required During Installation
GMC Sonoma 2002
  • 2.2L L4 2190CC/134CID
  • Cutting and Welding Required During Installation
GMC Sonoma 2003
  • 2.2L L4 2190CC/134CID
  • Cutting and Welding Required During Installation
GMC Yukon 2015
  • Front Left
  • Front Right
  • Rear
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
GMC Yukon XL 2015
  • Front Left
  • Front Right
  • Rear
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
GMC Yukon XL 1500 2003
  • Right
  • Left
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
Honda Accord 2005
  • Rear
  • 3L V6 2997CC
  • Cutting and Welding Required During Installation
Honda Pilot 2013
  • Rear
  • 3.5L V6 3471CC
  • Cutting and Welding Required During Installation
Honda Pilot 2014
  • Rear
  • 3.5L V6 3471CC
  • Cutting and Welding Required During Installation
Honda Pilot 2015
  • Rear
  • 3.5L V6 3471CC
  • Cutting and Welding Required During Installation
Hummer H2 2008
  • Right
  • Left
  • 6.2L V8 6162CC/376CID
  • Cutting and Welding Required During Installation
Hummer H2 2009
  • Right
  • Left
  • 6.2L V8 6162CC/376CID
  • Cutting and Welding Required During Installation
Hummer H3 2007
  • 3.7L L5
  • Cutting and Welding Required During Installation
Hummer H3 2008
  • 3.7L L5
  • Cutting and Welding Required During Installation
Hyundai Elantra 2004
  • 2L L4 1975CC
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
Hyundai Elantra 2005
  • 2L L4 1975CC
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
Hyundai Entourage 2007
  • 3.8L V6 3778CC/231CID
  • Cutting and Welding Required During Installation
Hyundai Entourage 2008
  • 3.8L V6 3778CC/231CID
  • Cutting and Welding Required During Installation
Hyundai Entourage 2009
  • 3.8L V6 3778CC/231CID
  • Cutting and Welding Required During Installation
  • CAN
Infiniti QX56 2007
  • Right
  • Left
  • 5.6L V8 5552CC
  • Cutting and Welding Required During Installation
Infiniti QX56 2008
  • Right
  • Left
  • 5.6L V8 5552CC
  • Cutting and Welding Required During Installation
Infiniti QX56 2009
  • Rear Left
  • Rear Right
  • 5.6L V8 5552CC
  • Cutting and Welding Required During Installation
Infiniti QX56 2010
  • Rear Left
  • Rear Right
  • 5.6L V8 5552CC
  • Cutting and Welding Required During Installation
Jeep Grand Cherokee 1999
  • Front
  • 4.7L V8 287CID
  • Cutting and Welding Required During Installation
Jeep Grand Cherokee 2000
  • Front
  • 4.7L V8 287CID
  • Cutting and Welding Required During Installation
Jeep Grand Cherokee 2001
  • Front
  • 4.7L V8 287CID
  • Cutting and Welding Required During Installation
Jeep Grand Cherokee 2002
  • Rear
  • 4L L6 242CID
  • Cutting and Welding Required During Installation
Jeep Grand Cherokee 2003
  • Rear
  • 4L L6 242CID
  • Cutting and Welding Required During Installation
Jeep Grand Cherokee 2004
  • Rear
  • 4.7L V8 287CID
  • 4L L6 242CID
  • Cutting and Welding Required During Installation
Kia Sedona 2006
  • 3.8L V6 3778CC/231CID
  • Cutting and Welding Required During Installation
Kia Sedona 2007
  • 3.8L V6 3778CC/231CID
  • Cutting and Welding Required During Installation
Kia Sedona 2008
  • 3.8L V6 3778CC/231CID
  • Cutting and Welding Required During Installation
Kia Sedona 2009
  • 3.8L V6 3778CC/231CID
  • Cutting and Welding Required During Installation
Kia Sedona 2010
  • 3.8L V6 3778CC/231CID
  • Cutting and Welding Required During Installation
Land Rover Range Rover 2014
  • Rear Left
  • Rear Right
  • 3L V6 2995CC/183CID
Land Rover Range Rover 2015
  • Rear Left
  • Rear Right
  • 3L V6 2995CC/183CID
Land Rover Range Rover 2016
  • Rear Left
  • Rear Right
  • 3L V6 2995CC/183CID
Land Rover Range Rover 2017
  • Rear Left
  • Rear Right
  • 3L V6 2995CC/183CID
Land Rover Range Rover Sport 2014
  • Rear Left
  • Rear Right
  • 3L V6 2995CC/183CID
Land Rover Range Rover Sport 2015
  • Rear Left
  • Rear Right
  • 3L V6 2995CC/183CID
Land Rover Range Rover Sport 2016
  • Rear Left
  • Rear Right
  • 3L V6 2995CC/183CID
Land Rover Range Rover Sport 2017
  • Rear Left
  • Rear Right
  • 3L V6 2995CC/183CID
Lexus ES350 2011
  • 3.5L V6 3456CC
  • Cutting and Welding Required During Installation
Lexus ES350 2012
  • 3.5L V6 3456CC
  • Cutting and Welding Required During Installation
Lexus ES350 2013
  • 3.5L V6 3456CC
  • Cutting and Welding Required During Installation
Lexus ES350 2014
  • 3.5L V6 3456CC
  • Cutting and Welding Required During Installation
Lexus ES350 2015
  • 3.5L V6 3456CC
  • Cutting and Welding Required During Installation
Lexus RX350 2010
  • Rear
  • 3.5L V6 3456CC
  • Cutting and Welding Required During Installation
Lexus RX350 2011
  • Rear
  • 3.5L V6 3456CC
  • Cutting and Welding Required During Installation
Lexus RX350 2012
  • Rear
  • 3.5L V6 3456CC
  • Cutting and Welding Required During Installation
Lexus RX350 2013
  • Rear
  • 3.5L V6 3456CC
  • Cutting and Welding Required During Installation
Lexus RX350 2014
  • Rear
  • 3.5L V6 3456CC
  • Cutting and Welding Required During Installation
Lexus RX350 2015
  • Rear
  • 3.5L V6 3456CC
  • Cutting and Welding Required During Installation
Lincoln Aviator 2003
  • Front Left
  • Front Right
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Lincoln Aviator 2004
  • Front Right
  • Front Left
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Lincoln Aviator 2005
  • Front Right
  • Front Left
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Lincoln Mark LT 2006
  • Left
  • Right
  • RWD
  • 5.4L V8 330CID
  • Cutting and Welding Required During Installation
  • Split Date To: To 12/04/2006
Lincoln Mark LT 2007
  • Left
  • Right
  • RWD
  • 5.4L V8 330CID
  • Cutting and Welding Required During Installation
  • Split Date To: To 12/04/2006
Mazda 3 2004
  • 2L L4 2000CC/122CID
  • 2.3L L4 2260CC
  • Cutting and Welding Required During Installation
Mazda 3 2005
  • Rear
  • 2L L4 2000CC/122CID
  • 2.3L L4 2260CC
  • Cutting and Welding Required During Installation
Mazda 3 2006
  • Rear
  • 2L L4 2000CC/122CID
  • 2.3L L4 2260CC
  • Cutting and Welding Required During Installation
Mazda 5 2010
  • 2.3L L4 2260CC
  • Cutting and Welding Required During Installation
Mazda B3000 2004
  • Rear
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Mazda B3000 2005
  • Rear
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Mazda B3000 2006
  • Rear
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Mazda B4000 2004
  • Rear
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Mazda B4000 2005
  • Rear
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Mazda B4000 2006
  • Rear
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Mazda CX-7 2007
  • Rear
  • 2.3L L4 2260CC
Mazda CX-7 2008
  • Rear
  • 2.3L L4 2260CC
Mazda CX-7 2009
  • Rear
  • 2.3L L4 2260CC
Mercedes-Benz C36 AMG 1995
  • Right
  • Left
  • 3.6L L6 3606CC
  • Cutting and Welding Required During Installation
Mercedes-Benz C36 AMG 1996
  • Right
  • Left
  • 3.6L L6 3606CC
  • Cutting and Welding Required During Installation
Mercedes-Benz C230 2002
  • 2.3L L4 2295CC
  • Cutting and Welding Required During Installation
Mercedes-Benz C280 1994
  • Left
  • Right
  • 2.8L L6 2799CC
Mercedes-Benz C280 1995
  • Left
  • Right
  • 2.8L L6 2799CC
Mercedes-Benz C280 1996
  • Left
  • Right
  • 2.8L L6 2799CC
Mercedes-Benz C280 1997
  • Left
  • Right
  • 2.8L L6 2799CC
Mercedes-Benz CL600 2007
  • Left
  • Right
  • 5.5L V12 5513CC/336CID
Mercedes-Benz CL600 2008
  • Left
  • Right
  • 5.5L V12 5513CC/336CID
Mercedes-Benz CL600 2009
  • Left
  • Right
  • 5.5L V12 5513CC/336CID
Mercedes-Benz S600 2007
  • Left
  • Right
  • 5.5L V12 5513CC/336CID
Mercedes-Benz S600 2008
  • Left
  • Right
  • 5.5L V12 5513CC/336CID
Mercedes-Benz S600 2009
  • Left
  • Right
  • 5.5L V12 5513CC/336CID
Mercedes-Benz SLK55 AMG 2005
  • Front Left
  • Front Right
  • Rear Left
  • Rear Right
  • 5.5L V8
  • Cutting and Welding Required During Installation
Mercedes-Benz SLK55 AMG 2006
  • Front Left
  • Front Right
  • Rear Left
  • Rear Right
  • 5.5L V8
  • Cutting and Welding Required During Installation
Mercedes-Benz SLK55 AMG 2007
  • Front Left
  • Front Right
  • Rear Left
  • Rear Right
  • 5.5L V8
  • Cutting and Welding Required During Installation
Mercedes-Benz SLK55 AMG 2008
  • Front Left
  • Front Right
  • Rear Left
  • Rear Right
  • 5.5L V8
  • Cutting and Welding Required During Installation
Mercedes-Benz SLK55 AMG 2009
  • Front Left
  • Front Right
  • Rear Left
  • Rear Right
  • 5.5L V8
  • Cutting and Welding Required During Installation
Mercedes-Benz SLK55 AMG 2010
  • Front Left
  • Front Right
  • Rear Left
  • Rear Right
  • 5.5L V8
  • Cutting and Welding Required During Installation
Mercedes-Benz SLK230 2001
  • 2.3L L4 2295CC
  • Cutting and Welding Required During Installation
Mercedes-Benz SLK230 2002
  • 2.3L L4 2295CC
  • Cutting and Welding Required During Installation
Mercedes-Benz SLK230 2003
  • 2.3L L4 2295CC
  • Cutting and Welding Required During Installation
Mercedes-Benz SLK230 2004
  • 2.3L L4 2295CC
  • Cutting and Welding Required During Installation
Mercury Mountaineer 2002
  • Front Right
  • Front Left
  • 4L V6 245CID
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Mercury Mountaineer 2003
  • Front Right
  • Front Left
  • 4L V6 245CID
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Mercury Mountaineer 2004
  • Front Right
  • Right
  • Front Left
  • 4L V6 245CID
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Mercury Mountaineer 2005
  • Left
  • Right
  • Front Left
  • Front Right
  • 4L V6 245CID
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
  • Split Date From: From 03/02/2004
Mini Cooper 2010
  • Rear
  • 1.6L L4 1598CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Mini Cooper 2011
  • Rear
  • 1.6L L4 1598CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Mini Cooper 2012
  • Rear
  • 1.6L L4 1598CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Mini Cooper 2013
  • Rear
  • 1.6L L4 1598CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Mini Cooper 2014
  • Rear
  • 1.6L L4 1598CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Mitsubishi Outlander 2003
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Mitsubishi Outlander 2004
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Mitsubishi Outlander 2005
  • 2.4L L4 2378CC
  • Cutting and Welding Required During Installation
Mitsubishi Outlander 2006
  • 2.4L L4 2378CC
  • Cutting and Welding Required During Installation
Nissan Altima 2006
  • Rear
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Nissan Altima 2007
  • Rear
  • 2.5L L4 2488CC/152CID
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Nissan Altima 2008
  • Rear
  • 2.5L L4 2488CC/152CID
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Nissan Altima 2009
  • Rear
  • 2.5L L4 2488CC/152CID
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Nissan Altima 2010
  • Rear
  • 2.5L L4 2488CC/152CID
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Nissan Altima 2011
  • Rear
  • 2.5L L4 2488CC/152CID
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Nissan Altima 2012
  • Rear
  • 2.5L L4 2488CC/152CID
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Nissan Altima 2013
  • Rear
  • 2.5L L4 2488CC/152CID
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Nissan Altima 2014
  • Rear
  • 2.5L L4 2488CC/152CID
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Nissan Altima 2015
  • 2.5L L4 2488CC/152CID
  • Cutting and Welding Required During Installation
Nissan Armada 2005
  • Right
  • Left
  • 5.6L V8 5552CC
  • Cutting and Welding Required During Installation
Nissan Armada 2006
  • Right
  • Left
  • 5.6L V8 5552CC
  • Cutting and Welding Required During Installation
Nissan Armada 2007
  • Right
  • Left
  • 5.6L V8 5552CC
  • Cutting and Welding Required During Installation
Nissan Armada 2008
  • Right
  • Left
  • 5.6L V8 5552CC
  • Cutting and Welding Required During Installation
Nissan Armada 2009
  • Right
  • Left
  • 5.6L V8 5552CC
  • Cutting and Welding Required During Installation
Nissan Armada 2010
  • Right
  • Rear Right
  • 5.6L V8 5552CC
  • Cutting and Welding Required During Installation
Nissan Maxima 2004
  • Rear
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Nissan Maxima 2005
  • Rear
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Nissan Maxima 2006
  • Rear
  • Automatic
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
  • 5
Nissan Maxima 2007
  • Rear
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Nissan Maxima 2008
  • Rear
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Nissan Maxima 2009
  • Rear
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Nissan Maxima 2010
  • Rear
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Nissan Maxima 2011
  • Rear
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Nissan Maxima 2012
  • Rear
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Nissan Maxima 2013
  • Rear
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Nissan Maxima 2014
  • Rear
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Nissan Murano 2003
  • Rear
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Nissan Murano 2004
  • Rear
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Nissan Murano 2005
  • Rear
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Nissan Murano 2006
  • Rear
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Nissan Murano 2007
  • Rear
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Nissan Murano 2009
  • Rear
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Nissan Murano 2010
  • Rear
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Nissan Murano 2011
  • Rear
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Nissan Murano 2012
  • Rear
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Nissan Murano 2013
  • Rear
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Nissan Murano 2014
  • Rear
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Nissan Murano 2015
  • Rear
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Nissan Quest 2004
  • Rear
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Nissan Quest 2005
  • Rear
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Nissan Quest 2006
  • Rear
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Nissan Quest 2007
  • Rear
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Nissan Quest 2008
  • Rear
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Nissan Quest 2009
  • Rear
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Nissan Quest 2011
  • Rear
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Nissan Quest 2012
  • Rear
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Nissan Quest 2013
  • Rear
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Nissan Quest 2014
  • Rear
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Nissan Sentra 2013
  • 1.8L L4 1798CC/110CID
  • Cutting and Welding Required During Installation
Nissan Sentra 2014
  • 1.8L L4 1798CC/110CID
  • Cutting and Welding Required During Installation
Nissan Sentra 2015
  • 1.8L L4 1798CC/110CID
  • Cutting and Welding Required During Installation
Oldsmobile Intrigue 1998
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Oldsmobile Silhouette 2001
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Oldsmobile Silhouette 2003
  • FWD
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Oldsmobile Silhouette 2004
  • FWD
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Pontiac G8 2008
  • Left
  • Right
  • 6L V8 5967CC/364CID
  • Cutting and Welding Required During Installation
Pontiac G8 2009
  • Left
  • Right
  • GXP
  • 6L V8 5967CC/364CID
  • 6.2L V8 6162CC/376CID
  • Cutting and Welding Required During Installation
Pontiac Grand Prix 2005
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
Pontiac Grand Prix 2006
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
Pontiac Grand Prix 2007
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
Pontiac Grand Prix 2008
  • 5.3L V8 5328CC/325CID
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Pontiac GTO 2005
  • Left
  • Right
  • 6L V8 5967CC/364CID
  • Cutting and Welding Required During Installation
Pontiac GTO 2006
  • Left
  • Right
  • 6L V8 5967CC/364CID
  • Cutting and Welding Required During Installation
Pontiac Montana 2001
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Pontiac Montana 2004
  • FWD
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Pontiac Solstice 2006
  • 2.4L L4 2384CC/145CID
  • Cutting and Welding Required During Installation
Pontiac Solstice 2007
  • 2.4L L4 2384CC/145CID
  • Cutting and Welding Required During Installation
Pontiac Solstice 2008
  • 2.4L L4 2384CC/145CID
  • Cutting and Welding Required During Installation
Pontiac Solstice 2009
  • 2.4L L4 2384CC/145CID
  • Cutting and Welding Required During Installation
Pontiac Vibe 2009
  • 2.4L L4 2362CC/-CID
  • Cutting and Welding Required During Installation
Pontiac Vibe 2010
  • 2.4L L4 2362CC/-CID
  • Cutting and Welding Required During Installation
Ram 1500 2011
  • 5.7L V8 345CID
  • Cutting and Welding Required During Installation
Saab 9-7x 2005
  • 4.2L L6 256CID
  • Cutting and Welding Required During Installation
Saab 9-7x 2008
  • Rear
  • 4.2L L6 256CID
  • Cutting and Welding Required During Installation
Saab 9-7x 2009
  • Rear
  • 4.2L L6 256CID
  • Cutting and Welding Required During Installation
Saab 9-3 2003
  • Rear
  • 2L L4 1985CC
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Saab 9-3 2004
  • Rear
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Saab 9-3 2005
  • Rear
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Saab 9-3 2006
  • Rear
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Saab 9-3 2007
  • Rear
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Saab 9-3 2008
  • Rear
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Saturn Relay 2006
  • 3.5L V6 213CID
  • Cutting and Welding Required During Installation
Saturn Sky 2007
  • Base
  • 2.4L L4 2384CC/145CID
  • Cutting and Welding Required During Installation
Saturn Sky 2008
  • Base
  • 2.4L L4 2384CC/145CID
  • Cutting and Welding Required During Installation
Saturn Sky 2009
  • Base
  • 2.4L L4 2384CC/145CID
  • Cutting and Welding Required During Installation
Saturn Vue 2002
  • 2.2L L4 2198CC/134CID
  • Cutting and Welding Required During Installation
Saturn Vue 2003
  • 2.2L L4 2198CC/134CID
  • Cutting and Welding Required During Installation
Saturn Vue 2004
  • 2.2L L4 2198CC/134CID
  • Cutting and Welding Required During Installation
Saturn Vue 2005
  • 2.2L L4 2198CC/134CID
  • Cutting and Welding Required During Installation
Saturn Vue 2006
  • 2.2L L4 2198CC/134CID
  • Cutting and Welding Required During Installation
Scion xB 2008
  • 2.4L L4 2362CC/-CID
  • Cutting and Welding Required During Installation
Scion xB 2009
  • 2.4L L4 2362CC/-CID
  • Cutting and Welding Required During Installation
Scion xB 2010
  • 2.4L L4 2362CC/-CID
  • Cutting and Welding Required During Installation
Scion xB 2011
  • 2.4L L4 2362CC/-CID
  • Cutting and Welding Required During Installation
Scion xB 2012
  • 2.4L L4 2362CC/-CID
  • Cutting and Welding Required During Installation
Scion xB 2013
  • 2.4L L4 2362CC/-CID
  • Cutting and Welding Required During Installation
Subaru Forester 2009
  • Rear
  • 2.5L H4 2458CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Subaru Forester 2010
  • Rear
  • 2.5L H4 2458CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Subaru Forester 2011
  • Rear
  • 2.5L H4 2498CC/152CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Subaru Forester 2012
  • Rear
  • 2.5L H4 2498CC/152CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Subaru Forester 2013
  • Rear
  • 2.5L H4 2498CC/152CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Subaru Impreza 2002
  • Front
  • 2L H4 1994CC
  • Cutting and Welding Required During Installation
Subaru Impreza 2003
  • Front
  • 2L H4 1994CC
  • Cutting and Welding Required During Installation
Subaru Impreza 2004
  • Front
  • 2L H4 1994CC
  • Cutting and Welding Required During Installation
Subaru Impreza 2005
  • Front
  • 2L H4 1994CC
  • Cutting and Welding Required During Installation
Subaru Impreza 2007
  • Front
  • 2.5L H4 2458CC
  • Turbocharged
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Subaru Impreza 2008
  • Rear
  • 2.5L H4 2458CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Subaru Impreza 2009
  • 2.5L H4 2458CC
  • Naturally Aspirated
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
Subaru Impreza 2010
  • 2.5L H4 2458CC
  • Naturally Aspirated
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
Subaru Legacy 2009
  • 2.5L H4 2458CC
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
Subaru Outback 2008
  • 2.5L H4 2458CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Subaru Outback 2009
  • 2.5L H4 2458CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Subaru Outback 2010
  • 2.5L H4 2458CC
  • Cutting and Welding Required During Installation
Subaru Outback 2011
  • 2.5L H4 2458CC
  • Cutting and Welding Required During Installation
Subaru Outback 2012
  • 2.5L H4 2458CC
  • Cutting and Welding Required During Installation
Subaru Outback 2013
  • Rear
  • 2.5L H4 2498CC/152CID
  • Cutting and Welding Required During Installation
Subaru Outback 2014
  • Rear
  • 2.5L H4 2498CC/152CID
  • Cutting and Welding Required During Installation
Subaru Outback 2015
  • Rear
  • 2.5L H4 2498CC/152CID
  • Cutting and Welding Required During Installation
Subaru WRX 2015
  • Standard
  • 2L H4 1998CC/122CID
Subaru WRX 2016
  • Standard
  • 2L H4 1998CC/122CID
Toyota Avalon 2005
  • 3.5L V6 3456CC
  • Cutting and Welding Required During Installation
Toyota Avalon 2006
  • 3.5L V6 3456CC
  • Cutting and Welding Required During Installation
Toyota Avalon 2007
  • 3.5L V6 3456CC
  • Cutting and Welding Required During Installation
Toyota Avalon 2008
  • 3.5L V6 3456CC
  • Cutting and Welding Required During Installation
Toyota Avalon 2009
  • 3.5L V6 3456CC
  • Cutting and Welding Required During Installation
Toyota Avalon 2010
  • 3.5L V6 3456CC
  • Cutting and Welding Required During Installation
Toyota Avalon 2011
  • 3.5L V6 3456CC
  • Cutting and Welding Required During Installation
Toyota Camry 2005
  • Rear
  • 3.3L V6 3300CC/202CID
  • Cutting and Welding Required During Installation
Toyota Camry 2006
  • Rear
  • 3.3L V6 3300CC/202CID
  • Cutting and Welding Required During Installation
Toyota Camry 2010
  • Rear
  • 2.5L L4 2494CC/152CID
  • Cutting and Welding Required During Installation
Toyota Camry 2011
  • Rear
  • 2.5L L4 2494CC/152CID
  • 3.5L V6 3456CC
  • Cutting and Welding Required During Installation
Toyota Highlander 2014
  • Rear
  • 3.5L V6 3456CC
  • Cutting and Welding Required During Installation
Toyota Matrix 2009
  • Rear
  • AWD
  • 2.4L L4 2362CC/-CID
  • Cutting and Welding Required During Installation
Toyota Matrix 2010
  • Rear
  • AWD
  • 2.4L L4 2362CC/-CID
  • Cutting and Welding Required During Installation
Toyota MR2 Spyder 2000
  • Rear
  • 1.8L L4 1794CC
  • Cutting and Welding Required During Installation
Toyota MR2 Spyder 2001
  • Rear
  • 1.8L L4 1794CC
  • Cutting and Welding Required During Installation
Toyota MR2 Spyder 2002
  • Rear
  • 1.8L L4 1794CC
  • Cutting and Welding Required During Installation
Toyota MR2 Spyder 2003
  • Rear
  • 1.8L L4 1794CC
  • Cutting and Welding Required During Installation
Toyota MR2 Spyder 2004
  • Rear
  • 1.8L L4 1794CC
  • Cutting and Welding Required During Installation
Toyota MR2 Spyder 2005
  • Rear
  • 1.8L L4 1794CC
  • Cutting and Welding Required During Installation
Toyota Prius V 2012
  • Front
  • Rear
  • 1.8L L4 1798CC/110CID
Toyota Prius V 2013
  • Front
  • Rear
  • 1.8L L4 1798CC/110CID
Toyota Prius V 2014
  • Front
  • Rear
  • 1.8L L4 1798CC/110CID
Toyota Prius V 2015
  • Front
  • Rear
  • 1.8L L4 1798CC/110CID
Toyota Prius V 2016
  • Front
  • Rear
  • 1.8L L4 1798CC/110CID
Toyota Prius V 2017
  • Front
  • Rear
  • 1.8L L4 1798CC/110CID
Toyota RAV4 2006
  • Rear
  • 3.5L V6 3456CC
  • Cutting and Welding Required During Installation
Toyota RAV4 2007
  • Rear
  • 3.5L V6 3456CC
  • Cutting and Welding Required During Installation
Toyota RAV4 2008
  • Rear
  • 3.5L V6 3456CC
  • Cutting and Welding Required During Installation
Toyota RAV4 2009
  • Rear
  • 3.5L V6 3456CC
  • Cutting and Welding Required During Installation
Toyota RAV4 2010
  • Rear
  • 3.5L V6 3456CC
  • Cutting and Welding Required During Installation
Toyota Sienna 2004
  • Rear
  • 3.3L V6 3300CC/202CID
  • Cutting and Welding Required During Installation
Toyota Sienna 2005
  • Rear
  • 3.3L V6 3300CC/202CID
  • Cutting and Welding Required During Installation
Toyota Sienna 2006
  • 3.3L V6 3300CC/202CID
  • Cutting and Welding Required During Installation
Toyota Sienna 2007
  • FWD
  • 3.5L V6 3456CC
  • Cutting and Welding Required During Installation
Toyota Sienna 2008
  • FWD
  • 3.5L V6 3456CC
  • Cutting and Welding Required During Installation
Toyota Sienna 2009
  • FWD
  • 3.5L V6 3456CC
  • Cutting and Welding Required During Installation
Toyota Sienna 2010
  • FWD
  • 3.5L V6 3456CC
  • Cutting and Welding Required During Installation
Toyota Sienna 2011
  • AWD
  • 3.5L V6 3456CC
  • Cutting and Welding Required During Installation
Toyota Sienna 2012
  • AWD
  • 3.5L V6 3456CC
  • Cutting and Welding Required During Installation
Toyota Sienna 2013
  • AWD
  • 3.5L V6 3456CC
  • Cutting and Welding Required During Installation
Toyota Sienna 2014
  • AWD
  • 3.5L V6 3456CC
  • Cutting and Welding Required During Installation
Toyota Sienna 2015
  • AWD
  • 3.5L V6 3456CC
  • Cutting and Welding Required During Installation
Toyota Sienna 2016
  • AWD
  • 3.5L V6 3456CC
  • Cutting and Welding Required During Installation
Toyota Tacoma 2005
  • 2.7L L4 2694CC
  • Cutting and Welding Required During Installation
Toyota Tacoma 2006
  • 2.7L L4 2694CC
  • Cutting and Welding Required During Installation
Toyota Tacoma 2007
  • 2.7L L4 2694CC
  • Cutting and Welding Required During Installation
Toyota Tacoma 2008
  • 2.7L L4 2694CC
  • Cutting and Welding Required During Installation
Toyota Tacoma 2009
  • 2.7L L4 2694CC
  • Cutting and Welding Required During Installation
Toyota Tacoma 2010
  • 2.7L L4 2694CC
  • Cutting and Welding Required During Installation
Toyota Tundra 2000
  • Rear
  • 3.4L V6 3378CC
  • Cutting and Welding Required During Installation
Toyota Tundra 2001
  • Rear
  • 3.4L V6 3378CC
  • Cutting and Welding Required During Installation
Toyota Tundra 2002
  • Rear
  • 3.4L V6 3378CC
  • Cutting and Welding Required During Installation
Toyota Tundra 2003
  • Rear
  • 3.4L V6 3378CC
  • Cutting and Welding Required During Installation
Toyota Tundra 2004
  • Rear
  • 3.4L V6 3378CC
  • Cutting and Welding Required During Installation
Volkswagen Eos 2009
  • Rear
  • 2L L4 1984CC/121CID
  • Cutting and Welding Required During Installation
Volkswagen Eos 2010
  • Rear
  • 2L L4 1984CC/121CID
  • Cutting and Welding Required During Installation
Volkswagen Eos 2011
  • Rear
  • 2L L4 1984CC/121CID
  • Cutting and Welding Required During Installation
Volkswagen Eos 2012
  • Rear
  • 2L L4 1984CC/121CID
  • Cutting and Welding Required During Installation
Volkswagen Eos 2013
  • Rear
  • 2L L4 1984CC/121CID
  • Cutting and Welding Required During Installation
Volkswagen Eos 2014
  • Rear
  • 2L L4 1984CC/121CID
  • Cutting and Welding Required During Installation
Volkswagen Eos 2015
  • Rear
  • 2L L4 1984CC/121CID
  • Cutting and Welding Required During Installation
Volkswagen GTI 2009
  • 2L L4 1984CC/121CID
  • Cutting and Welding Required During Installation
Volkswagen Passat 2006
  • Rear
  • 2L L4 1984CC/121CID
  • Cutting and Welding Required During Installation
Volkswagen Passat 2007
  • Rear
  • 2L L4 1984CC/121CID
  • Cutting and Welding Required During Installation
Volkswagen Passat 2008
  • Rear
  • 2L L4 1984CC/121CID
  • Cutting and Welding Required During Installation
Volkswagen Touareg 2004
  • Front
  • 3.2L V6 3200CC/195CID
  • Cutting and Welding Required During Installation
Volvo C70 2000
  • 2.3L L5 2319CC
  • 2.4L L5 2435CC
  • Cutting and Welding Required During Installation
Volvo C70 2001
  • 2.3L L5 2319CC
  • 2.4L L5 2435CC
  • Cutting and Welding Required During Installation
Volvo C70 2002
  • 2.3L L5 2319CC
  • 2.4L L5 2435CC
  • Cutting and Welding Required During Installation
Volvo C70 2003
  • 2.4L L5 2435CC
  • 2.3L L5 2319CC
  • Cutting and Welding Required During Installation
Volvo C70 2004
  • 2.4L L5 2435CC
  • 2.3L L5 2319CC
  • Cutting and Welding Required During Installation
Volvo S40 2005
  • 2.4L L5 2435CC
  • Cutting and Welding Required During Installation
Volvo S40 2006
  • 2.4L L5 2435CC
  • Cutting and Welding Required During Installation
Volvo S40 2007
  • 2.4L L5 2435CC
  • Cutting and Welding Required During Installation
Volvo S60 2001
  • 2.4L L5 2435CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Volvo S60 2002
  • 2.4L L5 2435CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Volvo S60 2003
  • AWD
  • 2.4L L5 2435CC
  • 2.5L L5 2521CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Volvo S60 2004
  • AWD
  • 2.5L L5 2521CC
  • 2.4L L5 2435CC
  • 2.5L L5 2521CC/154CID
  • Cutting and Welding Required During Installation
  • MEX
Volvo S80 2002
  • Front Left
  • Front Right
  • Rear
  • 2.9L L6 2917CC
  • Turbocharged
Volvo S80 2003
  • Front Left
  • Front Right
  • Rear
  • 2.9L L6 2917CC
  • Turbocharged
Volvo S80 2004
  • Front Left
  • Front Right
  • Rear
  • 2.9L L6 2917CC
  • Turbocharged
Volvo S80 2005
  • Front Left
  • Front Right
  • Rear
  • 2.9L L6 2917CC
Volvo V50 2005
  • 2.4L L5 2435CC
  • with Single Converter
  • Excluding Ultra Low Emissions Vehicles (ULEV)
  • Cutting and Welding Required During Installation
Volvo V50 2006
  • 2.4L L5 2435CC
  • with Single Converter
  • Excluding Ultra Low Emissions Vehicles (ULEV)
  • Cutting and Welding Required During Installation
Volvo V50 2007
  • 2.4L L5 2435CC
  • with Single Converter
  • Excluding Ultra Low Emissions Vehicles (ULEV)
  • Cutting and Welding Required During Installation
Volvo V50 2008
  • 2.4L L5 2435CC
  • with Single Converter
  • Excluding Ultra Low Emissions Vehicles (ULEV)
  • Cutting and Welding Required During Installation
Volvo V50 2009
  • Rear
  • 2.4L L5 2435CC
  • Ultra Low Emissions Vehicles (ULEV)
  • Cutting and Welding Required During Installation
Volvo V70 2000
  • 2.3L L5 2319CC
  • Cutting and Welding Required During Installation
Volvo V70 2001
  • 2.4L L5 2435CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Volvo V70 2002
  • 2.4L L5 2435CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Volvo V70 2003
  • 2.4L L5 2435CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Volvo V70 2004
  • 2.4L L5 2435CC
  • Cutting and Welding Required During Installation
Volvo XC90 2005
  • Rear
  • 4.4L V8 4414CC/269CID
  • Cutting and Welding Required During Installation
Volvo XC90 2006
  • Rear
  • 4.4L V8 4414CC/269CID
  • Cutting and Welding Required During Installation
Volvo XC90 2007
  • Rear
  • 4.4L V8 4414CC/269CID
  • Cutting and Welding Required During Installation
Volvo XC90 2008
  • Rear
  • 4.4L V8 4414CC/269CID
  • Cutting and Welding Required During Installation
Volvo XC90 2009
  • Rear
  • 4.4L V8 4414CC/269CID
  • Cutting and Welding Required During Installation
Volvo XC90 2010
  • Rear
  • 4.4L V8 4414CC/269CID
  • Cutting and Welding Required During Installation
Volvo XC90 2011
  • Rear
  • 4.4L V8 4414CC/269CID
  • Cutting and Welding Required During Installation