This will be used to show you compatible parts.
The product shown on this page is not compatible with the selected vehicle.
Warranty claims made within the entire coverage period will be honored by Reibung. During the first 30 days of the warranty period, VinniStore will handle the manufacturer's warranty and will exchange, replace or repair, at its option, any eligible defective product, upon approval. Any warranty claims made after the 30th day following the purchase date shall be solely addressed to Reibung directly. VinniStore will assist the client throughout any RMA process and their required steps by providing the necessary information to ensure the request is received and processed as it should by the manufacturer.
This text is generic and intended for informative purposes only, in no case it shall be interpreted or serve as a warranty statement, please refer to Reibung directly for official documentation and any specific information regarding the warranty.
We guarantee 100% exact fitment based on the vehicle specifications you provide at order confirmation. If for any reason your products do not fit and that the mistake is on our part, we will replace it free of charge.All warranty claims made to VinniStore must be done according to the Returns & Exchanges policy.
Delivering a virtually perfect balance for better stability, smoother stopping and minimal vibration.
Providing higher thermal efficiency while resulting in better rotor stability, superior braking power and improved safety.
A near perfect DTV and taper free non-directional friction surface finish is obtained, ensuring parallelism and minimizing vibrations while providing better initial bite and more effective pad/rotor break-in.
Angularly slotted with respect to the minimum edge distance to remove debris and prevent pad glazing while eliminating stress points.
Long lasting corrosion protection is ensured by either the E-Coat™ electro powdercoating or the Z-Coat™ zinc electroplating process.
Hats and other external surfaces are entirely machined to provide better rotor balance while creating a smooth surface finish.
Reibung™ Premium rotors are manufactured to equal or surpass OEM part specifications. Each rotor was carefully engineered and crafted according to the original equipment specifications ensuring that all clearances and tolerances are respected for a perfect fitment. This allows for OE equivalent or better performance while resulting in a quick and easy installation.
Long lasting corrosion protection is ensured by either the E-Coat™ electro powdercoating or the Z-Coat™ zinc electroplating process. Both providing a smooth and appealing finish designed to withstand 400 hours of salt water exposure.1 Most rotors on the market still come uncoated or use standard phosphate finishes which only provide minimal protection against the elements as they were conceived to protect the rotors for the transportation and storage. As soon as installed on the vehicle, the heat and moisture render these finishes much less effective resulting in immediate corrosion. Reibung™ Premium coated rotors are a more durable alternative for a better peace of mind while adding value to the vehicle.
Reibung™ Premium rotors hats and other external surfaces are entirely machined. Compared to uneven bare cast iron, this additional process provides better rotor balance while creating a clean and smooth surface finish.
Reibung™ Premium rotors friction surface area is double disc ground to minimize thickness variations and vibrations. A near perfect disc thickness variation (DTV) is obtained by double disc grinding which ensures parallelism and eliminates run out providing quieter and smoother stops. This taper free finish leaves a non-directional finish which results in better initial bite and in more effective pad/rotor break-in. RMS = 64.3 or Ra = 1.6 micro-meters (63 micro-inches) is the nominal production standard for surface Roughness.
Mill balanced to a tolerance of less than 2oz.inch, Reibung™ Premium rotors deliver a virtually perfect balance for better stability, smoother stopping and minimal vibration.
Proper heat transfer and thermal efficiency of center-split core casting results in better rotor stability, superior braking power and improved safety.2
Specific rotors vane structure has been engineered to match the original equipment design specifications. This ensures the rotors will behave as the original part was intended to.2
Reibung™ Premium rotors are designed for direct OEM replacement. They are guaranteed to fit the original equipment with respect to all dimensional clearances. This allows for standard easy installation process as no modifications are required.
Ceramic compounds eliminate brake groan and harsh noises associated with semi-metallic pads engagement with the hard metal surface of the rotor.
Ceramic brake pad formulation is the solution generating the least amount of dust. The minimal dust produced is light colored, barely noticeable and less likely to stick to the wheels. This results in cleaner and easier to clean wheels while contributing to the proper functioning of the brake components.
Reibung brake pad formulas are all 100% asbestos-free. Although still used in the brake industry, asbestos fibers are recognized as highly toxic and are extremely hazardous to human health.
Precision cut/shaved backing plates and mechanically attached shims ensure proper fitment with the caliper while dampening vibrations and eliminating noise.
Manufactured using the same positive molding process utilized by OEM to provide consistent fade-free performance and predictable braking.
Improving pad/rotor engagement significantly reducing vibrations and noise while preventing "edge lifting".
Ensuring consistent performance throughout the brake pad service life and speeding up the bedding in process by pre-burning off gases and excess resins.
Adds flexibility to the pad preventing heat expansion cracks while promoting water and friction debris evacuation.
Reibung™ is known as a leading independently owned and managed Canadian manufacturer and distributor of premium and performance brake components. Most rotors are manufactured in ISO9002 / QS9000 / TUV World Standards compliant factories located in the provinces of Quebec and Ontario, Canada.
|Número de Pieza del Fabricante||BRPSTS65029-BC-K|
|Precio de Venta Sugerido por el Fabricante (MSRP)||399.85|