Grève chez Postes Canada - Temps en transit non affectés – Autres transporteurs utilisés; à l'exception des cases postales
100% BASÉ AU CANADA 100% CANADIEN
SANS FRAIS DE COURTAGE EN DOUANE SANS FRAIS DE DOUANE
MARCHAND AUTORISÉ MARCHAND AUTORISÉ
30 JOURS – RETOURS SANS TRACAS 30 JOURS – RETOURS
Comparer des produits
LIVRAISON GRATUITE*

MagnaFlow – Universal Stainless Steel CARB PRE-OBDII Catalytic Converter (2" IN\/2" OUT)

MagnaFlow
DISTRIBUTEUR AUTORISÉ

332304

Numéro de Pièce du Fabricant
Chargement en cours...
*Les images sont à titre illustratif seulement. Le produit réel peut varier.
SKU: MAG-332304
Sélectionnez un véhicule pour vérifier la compatibilité.

Sélectionnez un Véhicule

Cela servira à vous montrer les pièces compatibles.

Auto Parts Finder
  • Marque
  • Modèle
  • Année

Ce produit n'est pas compatible avec votre sélection!

Le produit affiché sur cette page n'est pas compatible avec vehicle

!
Afin d'assurer la bonne compatibilité des pièces, veuillez parcourir des produits compatibles ou changer votre sélection.


Changer la Sélection Actuelle
Livraison GRATUITE*

Livraison GRATUITE*

Ce produit sera livré à votre porte GRATUITEMENT!*

Toute commande totalisant 75,00 CA $ ou plus avant toutes taxes et éco-frais applicables, et une fois toutes réductions promotionnelles appliquées, qui est livrée dans nos zones de livraison gratuites se qualifie pour la promotion LIVRAISON GRATUITE.*

Afin de vous faire économiser encore plus, ViNNiStore a alloué la livraison GRATUITE pour certains produits spécialement sélectionnés.




Ce produit n'est pas disponible pour le moment, vous pouvez l'ajouter à vos Souhaits




ou vous inscrire pour être averti quand il sera de nouveau disponible




*Des exceptions peuvent s'appliquer, veuillez consulter la page de notre promotion Livraison Gratuite pour plus de détails.
Garantie Standard

Garantie Standard

Ce produit est couvert par une Garantie Standard contre les défauts de fabrication.

Les réclamations de garantie effectuées pendant la période de couverture complète seront honorées par MagnaFlow. Pendant les 30 premiers jours de la période de garantie, VinniStore se chargera de la garantie du fabricant et échangera, remplacera ou réparera, à sa discrétion, tout produit défectueux admissibles, sur approbation. Toutes réclamations de garantie effectuées après le 30e jour suivant la date d'achat devront exclusivement être adressées à MagnaFlow directement. VinniStore assistera le client à travers tout processus de RMA ainsi que leurs démarches requises en fournissant les informations nécessaires pour assurer que la demande soit reçue et traitée comme il se doit par le fabricant.


Ce texte est générique et est destiné à des fins informatives uniquement, en aucun cas il ne doit être interprété ou servir en tant que déclaration de garantie, veuillez vous référer à MagnaFlow directement pour toute documentation officielle et information spécifique en ce qui concerne la garantie.


Compatibilité du Véhicule

Nous garantissons à 100% l'équipement exact basé sur les spécifications des véhicules que vous fournissez lors de la confirmation de commande. Si pour quelque raison que ce soit vos produits s'avère être incompatibles et que l'erreur est de notre part, nous le remplacerons sans frais.


Toutes réclamations de garantie faites à VinniStore doivent être effectuées conformément à la politique Retours & Échanges.
Soyez le premier à commenter ce produit
271,64 CA $  PRICE
Commande Spéciale
1-3 Semaines
271,64 CA $
Prévenez-moi quand le produit est en stock
Ajouter à ma liste d’envie Ajouter au comparateur
Universal Stainless Steel CARB PRE-OBDII Catalytic Converter (2" IN\/2" OUT) doit être acheté par multiple de 1
MagnaFlow
DISTRIBUTEUR AUTORISÉ

332304

Numéro de Pièce du Fabricant
Plus d’information
Fabricant MagnaFlow
Numéro de Pièce du Fabricant 332304
Prix de Détail Suggéré du Fabricant (MSRP) 259,38
Rédigez votre propre commentaire
Seuls les utilisateurs sauvegardés peuvent soumettre leur avis. Veuillez vous connecter ou créer un compte
This table represents all the 508 compatible vehicles for this part:
Marque Modèle Année
Application Notes
Position Submodel Transmission Body Type Drive Type Engine Aspiration Additional Information
Acura Integra 1986
  • 1.6L L4 1590CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Acura Integra 1987
  • 1.6L L4 1590CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Acura Integra 1988
  • 1.6L L4 1590CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Acura Integra 1989
  • 1.6L L4 1590CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Acura Integra 1990
  • 1.8L L4 1834CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Acura Integra 1991
  • 1.8L L4 1834CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Acura Integra 1992
  • GS-R
  • 1.8L L4 1834CC
  • 1.7L L4 1678CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Acura Integra 1993
  • GS-R
  • 1.8L L4 1834CC
  • 1.7L L4 1678CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Acura Integra 1994
  • 1.8L L4 1834CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Acura Integra 1995
  • 1.8L L4 1834CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Acura Legend 1986
  • 2.5L V6 2494CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Acura Legend 1987
  • 2.5L V6 2494CC
  • 2.7L V6 2675CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Acura Legend 1988
  • 2.7L V6 2675CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Acura Legend 1989
  • 2.7L V6 2675CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Acura Legend 1990
  • 2.7L V6 2675CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Acura NSX 1991
  • Left
  • Right
  • 3L V6 2977CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Acura NSX 1992
  • Left
  • Right
  • 3L V6 2977CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Acura NSX 1993
  • Left
  • Right
  • 3L V6 2977CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Acura NSX 1994
  • Left
  • Right
  • 3L V6 2977CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Acura Vigor 1992
  • 2.5L L5 2451CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Acura Vigor 1993
  • 2.5L L5 2451CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Acura Vigor 1994
  • 2.5L L5 2451CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Audi 100 Series 1975
  • 1.9L L4 1871CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Audi 100 Series 1976
  • 1.9L L4 1871CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Audi 100 Series 1977
  • 1.9L L4 1871CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Audi 80 1988
  • Automatic
  • 2L L4 1983CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Audi 80 1989
  • Automatic
  • 2L L4 1983CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Audi 80 1990
  • Automatic
  • 2L L4 1983CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Audi 90 1988
  • Automatic
  • 2L L4 1983CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Audi 100 1992
  • Right
  • Left
  • FWD
  • 2.8L V6
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Audi 100 1993
  • Left
  • Right
  • FWD
  • 2.8L V6
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Audi 100 1994
  • Left
  • Right
  • FWD
  • 2.8L V6
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Audi 4000 1980
  • 1.6L L4 1588CC/97cCID
  • 2.2L L5 2144CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Audi 4000 1981
  • 2.2L L5 2144CC
  • 1.7L L4 1715CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Audi 4000 1982
  • 2.2L L5 2144CC
  • 1.7L L4 1715CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Audi 4000 1983
  • 2.2L L5 2144CC
  • 1.7L L4 1715CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Audi 4000 1985
  • 1.8L L4 1781CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Audi 4000 1986
  • 1.8L L4 1781CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Audi 4000 1987
  • 1.8L L4 1781CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Audi 5000 1978
  • 2.2L L5 2144CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Audi 5000 1979
  • 2.2L L5 2144CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Audi 5000 1980
  • 2.2L L5 2144CC
  • Naturally Aspirated
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Audi 5000 1981
  • 2.2L L5 2144CC
  • Naturally Aspirated
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Audi 5000 1982
  • 2.2L L5 2144CC
  • Naturally Aspirated
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Audi 5000 1983
  • 2.2L L5 2144CC
  • Naturally Aspirated
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Audi 5000 1984
  • 2.2L L5 2144CC
  • Naturally Aspirated
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Audi Cabriolet 1994
  • Right
  • Left
  • 2.8L V6
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Audi Cabriolet 1995
  • Right
  • Left
  • 2.8L V6
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Audi Fox 1975
  • 1.6L L4 1588CC/97cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Audi Fox 1976
  • 1.6L L4 1588CC/97cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Audi Fox 1977
  • 1.6L L4 1588CC/97cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Audi Fox 1978
  • 1.6L L4 1588CC/97cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Audi Fox 1979
  • 1.6L L4 1588CC/97cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Audi S4 1992
  • 2.2L L5 2226CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Audi S4 1993
  • 2.2L L5 2226CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Audi S4 1994
  • 2.2L L5 2226CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Audi S6 1995
  • 2.2L L5 2226CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
BMW M3 1995
  • Left
  • Right
  • 3L L6 2990CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Chevrolet Nova 1988
  • 1.6L L4 1588CC/98cCID
  • 5
  • FI
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Challenger 1978
  • 1.6L L4 1597CC/98cCID
  • 2.6L L4 2555CC/156CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Challenger 1979
  • 1.6L L4 1597CC/98cCID
  • 2.6L L4 2555CC/156CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Challenger 1980
  • 2.6L L4 2555CC/156CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Challenger 1981
  • 2.6L L4 2555CC/156CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Challenger 1982
  • 2.6L L4 2555CC/156CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Challenger 1983
  • 2.6L L4 2555CC/156CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Colt 1975
  • 1.6L L4 1597CC/98cCID
  • 2L L4 1997CC/122CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Colt 1976
  • 1.6L L4 1597CC/98cCID
  • 2L L4 1997CC/122CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Colt 1977
  • 1.6L L4 1597CC/98cCID
  • 2L L4 1997CC/122CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Colt 1978
  • 1.6L L4 1597CC/98cCID
  • 2.6L L4 2555CC/156CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Colt 1979
  • 1.6L L4 1597CC/98cCID
  • 1.4L L4 1410CC
  • 2.6L L4 2555CC/156CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Colt 1980
  • 1.6L L4 1597CC/98cCID
  • 1.4L L4 1410CC
  • 2.6L L4 2555CC/156CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Colt 1981
  • 1.6L L4 1597CC/98cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Colt 1982
  • 1.6L L4 1597CC/98cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Colt 1983
  • 1.6L L4 1597CC/98cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Colt 1984
  • 1.6L L4 1597CC/98cCID
  • Naturally Aspirated
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Colt 1987
  • 1.6L L4 1597CC/98cCID
  • 1.5L L4 1468CC/90cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Colt 1988
  • 1.6L L4 1597CC/98cCID
  • 1.5L L4 1468CC/90cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Colt 1989
  • 1.6L L4 1597CC/98cCID
  • 1.8L L4 1754CC/107CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Colt 1990
  • 1.6L L4 1597CC/98cCID
  • 1.8L L4 1754CC/107CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Colt 1991
  • 1.5L L4 1468CC/90cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Colt 1992
  • 1.5L L4 1468CC/90cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Colt 1993
  • 1.8L L4 1834CC/112CID
  • 1.5L L4 1468CC/90cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Colt 1994
  • 1.8L L4 1834CC/112CID
  • 1.5L L4 1468CC/90cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Eagle Summit 1989
  • 1.6L L4 1597CC/98cCID
  • 1.5L L4 1468CC/90cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Eagle Summit 1990
  • 1.6L L4 1597CC/98cCID
  • 1.5L L4 1468CC/90cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Eagle Summit 1991
  • 1.5L L4 1468CC/90cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Eagle Summit 1992
  • 2.4L L4 2351CC
  • 1.8L L4 1834CC/112CID
  • 1.5L L4 1468CC/90cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Eagle Summit 1993
  • Sedan
  • Wagon
  • 2.4L L4 2351CC
  • 1.8L L4 1834CC/112CID
  • 1.5L L4 1468CC/90cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Eagle Summit 1994
  • Sedan
  • Wagon
  • 2.4L L4 2351CC
  • 1.8L L4 1834CC/112CID
  • 1.5L L4 1468CC/90cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Eagle Summit 1995
  • Sedan
  • Wagon
  • 1.8L L4 1834CC/112CID
  • 1.5L L4 1468CC/90cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Escort 1986
  • 1.9L L4 116CID
  • 9
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Escort 1987
  • 1.9L L4 116CID
  • 9
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Escort 1988
  • 1.9L L4 116CID
  • 9
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Escort 1989
  • 1.9L L4 116CID
  • 9
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Escort 1990
  • 1.9L L4 116CID
  • 9
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Escort 1991
  • 1.9L L4 116CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • with Exhaust Gas Recirculation (EGR) On Outlet Pipe
  • Cutting and Welding Required During Installation
  • without Exhaust Gas Recirculation (EGR) Fitting On Outlet Pipe
Ford Escort 1992
  • 1.9L L4 116CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • with Exhaust Gas Recirculation (EGR) On Outlet Pipe
  • Cutting and Welding Required During Installation
  • without Exhaust Gas Recirculation (EGR) Fitting On Outlet Pipe
Ford Escort 1993
  • 1.9L L4 116CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • with Exhaust Gas Recirculation (EGR) On Outlet Pipe
  • Cutting and Welding Required During Installation
  • without Exhaust Gas Recirculation (EGR) Fitting On Outlet Pipe
Ford Escort 1994
  • 1.9L L4 116CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • with Exhaust Gas Recirculation (EGR) On Outlet Pipe
  • Cutting and Welding Required During Installation
  • without Exhaust Gas Recirculation (EGR) Fitting On Outlet Pipe
Ford Escort 1995
  • 1.9L L4 116CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • with Exhaust Gas Recirculation (EGR) On Outlet Pipe
  • Cutting and Welding Required During Installation
  • without Exhaust Gas Recirculation (EGR) Fitting On Outlet Pipe
Ford EXP 1987
  • 1.9L L4 116CID
  • 9
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford EXP 1988
  • 1.9L L4 116CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Festiva 1989
  • Automatic
  • 1.3L L4 1295CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Festiva 1990
  • 1.3L L4 1295CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Festiva 1991
  • 1.3L L4 1295CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Festiva 1992
  • 1.3L L4 1295CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Festiva 1993
  • 1.3L L4 1295CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Taurus 1989
  • SHO
  • 3L V6 2986CC/182CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Taurus 1990
  • SHO
  • 3L V6 2986CC/182CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Taurus 1991
  • Left
  • Right
  • SHO
  • 3.8L V6 232CID
  • 3L V6 2986CC/182CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Taurus 1992
  • Left
  • Right
  • SHO
  • 3.8L V6 232CID
  • 3L V6 2986CC/182CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Taurus 1993
  • Left
  • Right
  • SHO
  • 3.8L V6 232CID
  • 3.2L V6 195CID
  • 3L V6 2986CC/182CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Taurus 1994
  • Left
  • Right
  • 3.8L V6 232CID
  • 3.2L V6 195CID
  • 3L V6 2986CC/182CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Taurus 1995
  • Left
  • Right
  • GL
  • SE
  • LX
  • SHO
  • 3.8L V6 232CID
  • 3.2L V6 195CID
  • 3L V6 2986CC/182CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Geo Prizm 1989
  • 1.6L L4 1588CC/98cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Geo Prizm 1990
  • 1.6L L4 1587CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Geo Prizm 1991
  • 1.6L L4 1587CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Geo Prizm 1992
  • 1.6L L4 1587CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Honda Accord 1980
  • 1.8L L4 1751CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Honda Accord 1981
  • 1.8L L4 1751CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Honda Accord 1982
  • 1.8L L4 1751CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Honda Accord 1983
  • 1.8L L4 1751CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Honda Accord 1984
  • 1.8L L4 1829CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Honda Accord 1985
  • 1.8L L4 1829CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Honda Accord 1986
  • 2L L4 1955CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Honda Accord 1987
  • 2L L4 1955CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Honda Accord 1988
  • 2L L4 1955CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Honda Accord 1989
  • 2L L4 1955CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Honda Accord 1990
  • 2.2L L4 2156CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Honda Accord 1991
  • DX
  • EX
  • LX
  • SE
  • Coupe
  • Wagon
  • Sedan
  • 2.2L L4 2156CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Honda Accord 1992
  • LX
  • DX
  • EX
  • Coupe
  • Wagon
  • Sedan
  • 2.2L L4 2156CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Honda Accord 1993
  • DX
  • LX
  • SE
  • EX
  • Wagon
  • Coupe
  • Sedan
  • 2.2L L4 2156CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Honda Accord 1994
  • 2.2L L4 2156CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Honda Accord 1995
  • 2.2L L4 2156CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Honda Civic 1981
  • 1.5L L4 1487CC
  • 1.3L L4 1335CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Honda Civic 1982
  • 1.5L L4 1487CC
  • 1.3L L4 1335CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Honda Civic 1983
  • 1.5L L4 1487CC
  • 1.3L L4 1335CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Honda Civic 1986
  • 1.5L L4 1487CC
  • 1.5L L4 1493CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Honda Civic 1987
  • 1.5L L4 1487CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Honda Civic 1988
  • 1.6L L4 1588CC/98cCID
  • 1.5L L4 1493CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Honda Civic 1989
  • 1.6L L4 1588CC/98cCID
  • 1.5L L4 1493CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Honda Civic 1990
  • 1.6L L4 1588CC/98cCID
  • 1.5L L4 1493CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Honda Civic 1991
  • 1.6L L4 1588CC/98cCID
  • 1.5L L4 1493CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Honda Civic 1992
  • DX
  • LX
  • Sedan
  • 1.6L L4 1588CC/98cCID
  • 1.5L L4 1493CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Honda Civic 1993
  • DX
  • LX
  • Sedan
  • 1.6L L4 1588CC/98cCID
  • 1.5L L4 1493CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
  • California Emissions Equipped Vehicles Registered Outside Of California
Honda Civic 1994
  • DX
  • LX
  • Standard
  • 1.6L L4 1588CC/98cCID
  • 1.5L L4 1493CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
  • California Emissions Equipped Vehicles Registered Outside Of California
Honda Civic 1995
  • LX
  • DX
  • Standard
  • 1.6L L4 1588CC/98cCID
  • 1.5L L4 1493CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
  • California Emissions Equipped Vehicles Registered Outside Of California
Honda Civic del Sol 1993
  • 1.6L L4 1588CC/98cCID
  • 1.5L L4 1493CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Honda Civic del Sol 1994
  • 1.6L L4 1588CC/98cCID
  • 1.5L L4 1493CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Honda Civic del Sol 1995
  • 1.6L L4 1588CC/98cCID
  • 1.5L L4 1493CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Honda CRX 1988
  • 1.6L L4 1588CC/98cCID
  • 1.5L L4 1493CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Honda CRX 1989
  • 1.6L L4 1588CC/98cCID
  • 1.5L L4 1493CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Honda CRX 1990
  • 1.6L L4 1588CC/98cCID
  • 1.5L L4 1493CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Honda CRX 1991
  • 1.6L L4 1588CC/98cCID
  • 1.5L L4 1493CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Honda Prelude 1979
  • 1.8L L4 1751CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Honda Prelude 1980
  • 1.8L L4 1751CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Honda Prelude 1981
  • 1.8L L4 1751CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Honda Prelude 1982
  • 1.8L L4 1751CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Honda Prelude 1983
  • 1.8L L4 1829CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Honda Prelude 1984
  • 1.8L L4 1829CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Honda Prelude 1985
  • 1.8L L4 1829CC
  • 2L L4 1955CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Honda Prelude 1986
  • 1.8L L4 1829CC
  • 2L L4 1955CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Honda Prelude 1987
  • 1.8L L4 1829CC
  • 2L L4 1955CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Honda Prelude 1988
  • 2L L4 1958CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Honda Prelude 1989
  • 2L L4 1958CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Honda Prelude 1990
  • 2L L4 1958CC
  • 2.1L L4 2056CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Honda Prelude 1991
  • 2L L4 1958CC
  • 2.1L L4 2056CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Honda Prelude 1992
  • 2.2L L4 2156CC
  • 2.3L L4 2259CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Honda Prelude 1993
  • 2.2L L4 2156CC
  • 2.3L L4 2259CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Honda Prelude 1994
  • 2.2L L4 2156CC
  • 2.3L L4 2259CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Honda Prelude 1995
  • 2.2L L4 2156CC
  • 2.3L L4 2259CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Hyundai Accent 1995
  • 1.5L L4 1495CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Hyundai Excel 1990
  • 1.5L L4 1468CC/90cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Hyundai Excel 1991
  • 1.5L L4 1468CC/90cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Hyundai Excel 1992
  • 1.5L L4 1468CC/90cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Hyundai Excel 1993
  • 1.5L L4 1468CC/90cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Hyundai Excel 1994
  • 1.5L L4 1468CC/90cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Hyundai Scoupe 1991
  • 1.5L L4 1468CC/90cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Hyundai Scoupe 1992
  • 1.5L L4 1468CC/90cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Lincoln Continental 1990
  • Left
  • Right
  • 3.8L V6 232CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
  • Split Date From: From 11/1989
Lincoln Continental 1991
  • Left
  • Right
  • 3.8L V6 232CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Lincoln Continental 1992
  • Left
  • Right
  • 3.8L V6 232CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Lincoln Continental 1993
  • Left
  • Right
  • 3.8L V6 232CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Lincoln Continental 1994
  • Left
  • Right
  • 3.8L V6 232CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda 626 1986
  • 2L L4 1998CC/122CID
  • Naturally Aspirated
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda 626 1987
  • 2L L4 1998CC/122CID
  • Naturally Aspirated
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda 808 1975
  • 1.6L L4 1587CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda 808 1976
  • 1.6L L4 1587CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda 808 1977
  • 1.6L L4 1587CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda 929 1990
  • Left
  • Right
  • 3L V6 2954CC/180CID
  • DOHC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda 929 1991
  • Left
  • Right
  • 3L V6 2954CC/180CID
  • DOHC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda GLC 1981
  • 1.5L L4 1490CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda GLC 1982
  • 1.5L L4 1490CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda Miata 1990
  • 1.6L L4 1597CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda Miata 1991
  • 1.6L L4 1597CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda Miata 1992
  • 1.6L L4 1597CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda Miata 1993
  • 1.6L L4 1597CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda MX-3 1992
  • 1.8L V6 1845CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda MX-3 1993
  • 1.8L V6 1845CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercury Capri 1991
  • 1.6L L4 1598CC/98cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercury Capri 1992
  • 1.6L L4 1598CC/98cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercury Capri 1993
  • 1.6L L4 1598CC/98cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercury Capri 1994
  • 1.6L L4 1598CC/98cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercury Lynx 1986
  • 1.9L L4 116CID
  • 9
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercury Lynx 1987
  • 1.9L L4 116CID
  • 9
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercury Sable 1991
  • Left
  • Right
  • 3.8L V6 232CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercury Sable 1992
  • Left
  • Right
  • 3.8L V6 232CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercury Sable 1993
  • Left
  • Right
  • 3.8L V6 232CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercury Sable 1994
  • Left
  • Right
  • 3.8L V6 232CID
  • 3L V6 2986CC/182CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercury Sable 1995
  • Left
  • Right
  • 3.8L V6 232CID
  • 3L V6 2986CC/182CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercury Tracer 1991
  • 1.9L L4 116CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • with Exhaust Gas Recirculation (EGR) On Outlet Pipe
  • Cutting and Welding Required During Installation
  • without Exhaust Gas Recirculation (EGR) Fitting On Outlet Pipe
Mercury Tracer 1992
  • 1.9L L4 116CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • with Exhaust Gas Recirculation (EGR) On Outlet Pipe
  • Cutting and Welding Required During Installation
  • without Exhaust Gas Recirculation (EGR) Fitting On Outlet Pipe
Mercury Tracer 1993
  • 1.9L L4 116CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • with Exhaust Gas Recirculation (EGR) On Outlet Pipe
  • Cutting and Welding Required During Installation
  • without Exhaust Gas Recirculation (EGR) Fitting On Outlet Pipe
Mercury Tracer 1994
  • 1.9L L4 116CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • with Exhaust Gas Recirculation (EGR) On Outlet Pipe
  • Cutting and Welding Required During Installation
  • without Exhaust Gas Recirculation (EGR) Fitting On Outlet Pipe
Mercury Tracer 1995
  • 1.9L L4 116CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • with Exhaust Gas Recirculation (EGR) On Outlet Pipe
  • Cutting and Welding Required During Installation
  • without Exhaust Gas Recirculation (EGR) Fitting On Outlet Pipe
MG MGB 1975
  • 1.8L L4 1798CC/110CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
MG MGB 1976
  • 1.8L L4 1798CC/110CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
MG MGB 1977
  • 1.8L L4 1798CC/110CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
MG MGB 1978
  • 1.8L L4 1798CC/110CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
MG MGB 1979
  • 1.8L L4 1798CC/110CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
MG MGB 1980
  • 1.8L L4 1798CC/110CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
MG Midget 1975
  • 1.5L L4 1493CC/91cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
MG Midget 1976
  • 1.5L L4 1493CC/91cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
MG Midget 1977
  • 1.5L L4 1493CC/91cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
MG Midget 1978
  • 1.5L L4 1493CC/91cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
MG Midget 1979
  • 1.5L L4 1493CC/91cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mitsubishi Mirage 1987
  • 1.6L L4 1597CC/98cCID
  • 1.5L L4 1468CC/90cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mitsubishi Mirage 1988
  • 1.6L L4 1597CC/98cCID
  • 1.5L L4 1468CC/90cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mitsubishi Mirage 1989
  • 1.6L L4 1597CC/98cCID
  • 1.5L L4 1468CC/90cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mitsubishi Mirage 1990
  • 1.5L L4 1468CC/90cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mitsubishi Mirage 1991
  • 1.6L L4 1597CC/98cCID
  • 1.5L L4 1468CC/90cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mitsubishi Mirage 1992
  • 1.6L L4 1597CC/98cCID
  • 1.5L L4 1468CC/90cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mitsubishi Precis 1990
  • 1.5L L4 1468CC/90cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mitsubishi Precis 1991
  • 1.5L L4 1468CC/90cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mitsubishi Precis 1992
  • 1.5L L4 1468CC/90cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mitsubishi Precis 1993
  • 1.5L L4 1468CC/90cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mitsubishi Precis 1994
  • 1.5L L4 1468CC/90cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan 200SX 1977
  • 2L L4 1952CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan 200SX 1978
  • 2L L4 1952CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan 200SX 1979
  • 2L L4 1952CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan 200SX 1980
  • 2L L4 1952CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan 200SX 1981
  • 2L L4 1952CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan 200SX 1982
  • 2.2L L4 2187CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan 200SX 1983
  • 2.2L L4 2187CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan 200SX 1984
  • 1.8L L4 1809CC
  • 2L L4 1974CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan 200SX 1985
  • 1.8L L4 1809CC
  • 2L L4 1974CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan 280Z 1975
  • 2.8L L6 2753CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan 280Z 1976
  • 2.8L L6 2753CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan 280Z 1977
  • 2.8L L6 2753CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan 280Z 1978
  • 2.8L L6 2753CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan 280ZX 1979
  • 2.8L L6 2753CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan 280ZX 1980
  • 2.8L L6 2753CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan 280ZX 1981
  • 2.8L L6 2753CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan 280ZX 1982
  • 2.8L L6 2753CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan 280ZX 1983
  • 2.8L L6 2753CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan 300ZX 1990
  • Left
  • Right
  • 3L V6 2960CC/181CID
  • Naturally Aspirated
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan 300ZX 1991
  • Left
  • Right
  • 3L V6 2960CC/181CID
  • Naturally Aspirated
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan 300ZX 1992
  • Left
  • Right
  • 3L V6 2960CC/181CID
  • Naturally Aspirated
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan 300ZX 1993
  • Right
  • Left
  • 3L V6 2960CC/181CID
  • Naturally Aspirated
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan 300ZX 1994
  • Left
  • Right
  • 3L V6 2960CC/181CID
  • Naturally Aspirated
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan 210 1980
  • 1.4L L4 1393CC/85cCID
  • 1.5L L4 1488CC
  • 1.2L L4 1237CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan 210 1981
  • 1.4L L4 1393CC/85cCID
  • 1.5L L4 1488CC
  • 1.2L L4 1237CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan 210 1982
  • 1.4L L4 1393CC/85cCID
  • 1.5L L4 1488CC
  • 1.2L L4 1237CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan 310 1979
  • 1.4L L4 1393CC/85cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan 310 1980
  • 1.4L L4 1393CC/85cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan 310 1981
  • 1.5L L4 1488CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan 310 1982
  • 1.5L L4 1488CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan 510 1978
  • 2L L4 1952CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan 510 1979
  • 2L L4 1952CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan 510 1980
  • 2L L4 1952CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan 510 1981
  • 2L L4 1952CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan 810 1977
  • 2.4L L6 2393CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan 810 1978
  • 2.4L L6 2393CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan 810 1979
  • 2.4L L6 2393CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan 810 1980
  • 2.4L L6 2393CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan Maxima 1982
  • 2.4L L6 2393CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan Maxima 1983
  • 2.4L L6 2393CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan Maxima 1984
  • 2.4L L6 2393CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan Maxima 1986
  • 3L V6 2960CC/181CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan Maxima 1987
  • 3L V6 2960CC/181CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan Maxima 1988
  • 3L V6 2960CC/181CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan Maxima 1989
  • 3L V6 2960CC/181CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan Maxima 1990
  • 3L V6 2960CC/181CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan Maxima 1991
  • 3L V6 2960CC/181CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan Maxima 1992
  • 3L V6 2960CC/181CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan Maxima 1993
  • 3L V6 2960CC/181CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan Maxima 1994
  • 3L V6 2960CC/181CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan NX 1991
  • 2L L4 1998CC/122CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan NX 1992
  • 2L L4 1998CC/122CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan NX 1993
  • 2L L4 1998CC/122CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan Pulsar NX 1983
  • 1.5L L4 1488CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan Pulsar NX 1984
  • 1.5L L4 1488CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan Pulsar NX 1987
  • 1.6L L4 1597CC/97cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan Pulsar NX 1988
  • 1.6L L4 1597CC/97cCID
  • 1.8L L4 1809CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan Pulsar NX 1989
  • 1.8L L4 1809CC
  • 1.6L L4 1597CC/97cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan Pulsar NX 1990
  • 1.6L L4 1597CC/97cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan Stanza 1982
  • 2L L4 1974CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan Stanza 1983
  • 2L L4 1974CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan Stanza 1984
  • 2L L4 1974CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan Stanza 1985
  • Sedan
  • 2L L4 1974CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan Stanza 1986
  • Sedan
  • 2L L4 1974CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Peugeot 505 1980
  • 2L L4 1971CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Peugeot 505 1981
  • 2L L4 1971CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Peugeot 505 1982
  • 2L L4 1971CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Peugeot 505 1983
  • 2L L4 1971CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Peugeot 505 1984
  • 2L L4 1971CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Peugeot 505 1985
  • 2L L4 1971CC
  • 2.2L L4 2155CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Peugeot 505 1986
  • 2L L4 1971CC
  • 2.2L L4 2155CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Peugeot 505 1987
  • 2L L4 1971CC
  • 2.2L L4 2155CC
  • Turbocharged
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Peugeot 505 1988
  • 2.2L L4 2155CC
  • Turbocharged
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Peugeot 505 1989
  • 2.2L L4 2155CC
  • Turbocharged
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Peugeot 505 1990
  • 2.2L L4 2155CC
  • 2.2L L4 2165CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Peugeot 505 1991
  • 2.2L L4 2155CC
  • 2.2L L4 2165CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Plymouth Arrow 1980
  • 2.6L L4 2555CC/156CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Plymouth Champ 1979
  • 1.6L L4 1597CC/98cCID
  • 1.4L L4 1410CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Plymouth Champ 1980
  • 1.6L L4 1597CC/98cCID
  • 1.4L L4 1410CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Plymouth Champ 1981
  • 1.6L L4 1597CC/98cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Plymouth Champ 1982
  • 1.6L L4 1597CC/98cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Plymouth Colt 1983
  • 1.6L L4 1597CC/98cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Plymouth Colt 1984
  • 1.6L L4 1597CC/98cCID
  • Naturally Aspirated
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Plymouth Colt 1987
  • 1.6L L4 1597CC/98cCID
  • 1.5L L4 1468CC/90cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Plymouth Colt 1988
  • 1.6L L4 1597CC/98cCID
  • 1.5L L4 1468CC/90cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Plymouth Colt 1989
  • 1.6L L4 1597CC/98cCID
  • 1.8L L4 1754CC/107CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Plymouth Colt 1990
  • 1.6L L4 1597CC/98cCID
  • 1.8L L4 1754CC/107CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Plymouth Colt 1991
  • 1.5L L4 1468CC/90cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Plymouth Colt 1992
  • 2.4L L4 2351CC
  • 1.8L L4 1834CC/112CID
  • 1.5L L4 1468CC/90cCID
  • Certification Level : PRE-OBDII
  • USA
  • OE Spec
  • Cutting and Welding Required During Installation
  • CAN
Plymouth Colt 1993
  • 2.4L L4 2351CC
  • 1.8L L4 1834CC/112CID
  • 1.5L L4 1468CC/90cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Plymouth Colt 1994
  • 2.4L L4 2351CC
  • 1.8L L4 1834CC/112CID
  • 1.5L L4 1468CC/90cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Plymouth Sapporo 1978
  • 1.6L L4 1597CC/98cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Plymouth Sapporo 1979
  • 1.6L L4 1597CC/98cCID
  • 2.6L L4 2555CC/156CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Plymouth Sapporo 1980
  • 2.6L L4 2555CC/156CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Plymouth Sapporo 1981
  • 2.6L L4 2555CC/156CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Plymouth Sapporo 1982
  • 2.6L L4 2555CC/156CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Plymouth Sapporo 1983
  • 2.6L L4 2555CC/156CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Pontiac Fiero 1984
  • 2.5L L4 2474CC/151CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Pontiac Fiero 1985
  • 2.5L L4 2474CC/151CID
  • 2.8L V6 173CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Pontiac Fiero 1986
  • 2.5L L4 2474CC/151CID
  • 2.8L V6 173CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Pontiac Fiero 1987
  • 2.5L L4 2474CC/151CID
  • 2.8L V6 173CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Pontiac Fiero 1988
  • 2.5L L4 2474CC/151CID
  • 2.8L V6 173CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Porsche 924 1977
  • 2L L4 1983CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Porsche 924 1978
  • 2L L4 1983CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Porsche 924 1979
  • 2L L4 1983CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Porsche 928 1990
  • Right
  • Left
  • 5L V8 4950CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Porsche 928 1991
  • Left
  • Right
  • 5L V8 4950CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Porsche 928 1993
  • Left
  • Right
  • 5.4L V8 5392CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Porsche 928 1994
  • Left
  • Right
  • 5.4L V8 5392CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Porsche 928 1995
  • Left
  • Right
  • 5.4L V8 5392CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Porsche 944 1983
  • 2.5L L4 2475CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Porsche 944 1984
  • 2.5L L4 2475CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Porsche 944 1985
  • 2.5L L4 2475CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Renault Fuego 1982
  • 1.6L L4 1647CC/100CID
  • Naturally Aspirated
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Renault Fuego 1983
  • 1.6L L4 1647CC/100CID
  • Naturally Aspirated
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Renault R18i 1981
  • 1.6L L4 1647CC/100CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Renault R18i 1982
  • 1.6L L4 1647CC/100CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Renault R18i 1983
  • 1.6L L4 1647CC/100CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Saab 99 1975
  • 2L L4 1985CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Saab 99 1976
  • 2L L4 1985CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Saab 99 1977
  • 2L L4 1985CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Saab 99 1978
  • 2L L4 1985CC
  • Naturally Aspirated
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Saab 99 1979
  • 2L L4 1985CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Saab 99 1980
  • 2L L4 1985CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Saab 900 1979
  • 2L L4 1985CC
  • Naturally Aspirated
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Saab 900 1980
  • 2L L4 1985CC
  • Naturally Aspirated
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Saab 900 1981
  • 2L L4 1985CC
  • Naturally Aspirated
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Saab 900 1982
  • 2L L4 1985CC
  • Naturally Aspirated
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Saab 900 1983
  • 2L L4 1985CC
  • Naturally Aspirated
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Saab 900 1984
  • 2L L4 1985CC
  • Naturally Aspirated
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Saab 900 1985
  • 2L L4 1985CC
  • Naturally Aspirated
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Saab 900 1986
  • 2L L4 1985CC
  • Naturally Aspirated
  • DOHC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
  • SOHC
Saab 900 1987
  • 2L L4 1985CC
  • Naturally Aspirated
  • DOHC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
  • SOHC
Saab 900 1988
  • 2L L4 1985CC
  • Naturally Aspirated
  • DOHC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
  • SOHC
Saab 900 1989
  • 2L L4 1985CC
  • Naturally Aspirated
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Saab 900 1990
  • 2L L4 1985CC
  • Naturally Aspirated
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Camry 1983
  • 2L L4 1997CC/122CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Camry 1986
  • 2L L4 1997CC/122CID
  • GAS
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Celica 1990
  • 1.6L L4 1587CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Celica 1991
  • 1.6L L4 1587CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Celica 1992
  • 1.6L L4 1587CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Celica 1993
  • 1.6L L4 1587CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Celica 1994
  • 1.8L L4 1762CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Celica 1995
  • 1.8L L4 1762CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Corolla 1986
  • Sport GTS
  • 1.6L L4 1587CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Corolla 1987
  • Sport GTS
  • 1.6L L4 1587CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Corolla 1989
  • 1.6L L4 1587CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Corolla 1991
  • FWD
  • 1.6L L4 1587CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Corolla 1992
  • FWD
  • 1.6L L4 1587CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Cressida 1983
  • Wagon
  • 2.8L L6 2754CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Cressida 1984
  • Wagon
  • 2.8L L6 2754CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Cressida 1985
  • 2.8L L6 2754CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Cressida 1986
  • 2.8L L6 2754CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Cressida 1987
  • 2.8L L6 2754CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Cressida 1988
  • 2.8L L6 2754CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota MR2 1985
  • 1.6L L4 1587CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota MR2 1986
  • 1.6L L4 1587CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota MR2 1987
  • 1.6L L4 1587CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota MR2 1988
  • 1.6L L4 1587CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota MR2 1989
  • 1.6L L4 1587CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Paseo 1992
  • 1.5L L4 1497CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Paseo 1993
  • 1.5L L4 1497CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Paseo 1994
  • 1.5L L4 1497CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Paseo 1995
  • 1.5L L4 1497CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Starlet 1981
  • 1.3L L4 1290CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Starlet 1982
  • 1.3L L4 1290CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Tercel 1991
  • 1.5L L4 1456CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Tercel 1992
  • 1.5L L4 1456CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Tercel 1993
  • 1.5L L4 1456CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Tercel 1994
  • 1.5L L4 1456CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Volkswagen Beetle 1975
  • 1.6L H4 1584CC/97cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Volkswagen Beetle 1976
  • 1.6L H4 1584CC/97cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Volkswagen Beetle 1977
  • 1.6L H4 1584CC/97cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Volkswagen Beetle 1978
  • 1.6L H4 1584CC/97cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Volkswagen Beetle 1979
  • 1.6L H4 1584CC/97cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Volkswagen Dasher 1975
  • 1.5L L4 1471CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Volkswagen Dasher 1976
  • 1.6L L4 1588CC/97cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Volkswagen Dasher 1977
  • 1.6L L4 1588CC/97cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Volkswagen Dasher 1978
  • 1.6L L4 1588CC/97cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Volkswagen Dasher 1979
  • 1.6L L4 1588CC/97cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Volkswagen Dasher 1980
  • 1.6L L4 1588CC/97cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Volkswagen Dasher 1981
  • 1.6L L4 1588CC/97cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Volkswagen Golf 1988
  • 1.8L L4 1781CC
  • PF
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Volkswagen Golf 1989
  • 1.8L L4 1781CC
  • PF
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Volkswagen Jetta 1980
  • 1.6L L4 1588CC/97cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Volkswagen Jetta 1981
  • 1.7L L4 1715CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Volkswagen Jetta 1982
  • 1.7L L4 1715CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Volkswagen Jetta 1983
  • 1.7L L4 1715CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Volkswagen Jetta 1984
  • 1.7L L4 1715CC
  • 1.8L L4 1781CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Volkswagen Passat 1995
  • 2L L4 1984CC/121CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Volkswagen Quantum 1982
  • 1.7L L4 1715CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Volkswagen Quantum 1983
  • 2.2L L5 2144CC
  • 1.7L L4 1715CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Volkswagen Quantum 1984
  • 2.2L L5 2144CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Volkswagen Quantum 1985
  • 1.8L L4 1781CC
  • 2.2L L5 2226CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Volkswagen Rabbit 1975
  • 1.5L L4 1471CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Volkswagen Rabbit 1976
  • 1.6L L4 1588CC/97cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Volkswagen Rabbit 1977
  • 1.6L L4 1588CC/97cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Volkswagen Rabbit 1978
  • 1.5L L4 1471CC
  • 1.5L L4 1457CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Volkswagen Rabbit 1979
  • 1.5L L4 1471CC
  • 1.5L L4 1457CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Volkswagen Rabbit 1980
  • 1.5L L4 1471CC
  • 1.6L L4 1588CC/97cCID
  • 1.5L L4 1457CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Volkswagen Rabbit 1981
  • 1.7L L4 1715CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Volkswagen Rabbit 1982
  • 1.7L L4 1715CC
  • FI
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Volkswagen Rabbit 1983
  • 1.7L L4 1715CC
  • 1.8L L4 1781CC
  • FI
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Volkswagen Rabbit 1984
  • 1.7L L4 1715CC
  • 1.8L L4 1781CC
  • FI
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Volkswagen Scirocco 1975
  • 1.5L L4 1471CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Volkswagen Scirocco 1976
  • 1.6L L4 1588CC/97cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Volkswagen Scirocco 1977
  • 1.6L L4 1588CC/97cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Volkswagen Scirocco 1978
  • 1.5L L4 1457CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Volkswagen Scirocco 1979
  • 1.6L L4 1588CC/97cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Volkswagen Scirocco 1980
  • 1.6L L4 1588CC/97cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Volkswagen Scirocco 1981
  • 1.7L L4 1715CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Volkswagen Scirocco 1982
  • 1.7L L4 1715CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Volkswagen Scirocco 1983
  • 1.7L L4 1715CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Volvo 164 1975
  • 3L L6 2980CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Volvo 240 1990
  • 2.3L L4 2316CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • without Exhaust Gas Recirculation (EGR)
  • Cutting and Welding Required During Installation
Volvo 240 1991
  • 2.3L L4 2316CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • without Exhaust Gas Recirculation (EGR)
  • Cutting and Welding Required During Installation
Volvo 240 1992
  • 2.3L L4 2316CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • without Exhaust Gas Recirculation (EGR)
  • Cutting and Welding Required During Installation
Volvo 240 1993
  • 2.3L L4 2316CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • without Exhaust Gas Recirculation (EGR)
  • Cutting and Welding Required During Installation
Volvo 242 1975
  • 2L L4 1990CC/121CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Volvo 242 1976
  • 2.1L L4 2127CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Volvo 242 1977
  • 2.1L L4 2127CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Volvo 242 1978
  • 2.1L L4 2127CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Volvo 242 1979
  • 2.1L L4 2127CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Volvo 242 1980
  • 2.1L L4 2127CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Volvo 242 1981
  • 2.1L L4 2127CC
  • Naturally Aspirated
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Volvo 242 1982
  • 2.1L L4 2127CC
  • Naturally Aspirated
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Volvo 242 1983
  • 2.3L L4 2316CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Volvo 244 1975
  • 2L L4 1990CC/121CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Volvo 244 1976
  • 2.1L L4 2127CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Volvo 244 1977
  • 2.1L L4 2127CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Volvo 244 1978
  • 2.1L L4 2127CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Volvo 244 1979
  • 2.1L L4 2127CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Volvo 244 1980
  • 2.1L L4 2127CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Volvo 244 1981
  • 2.1L L4 2127CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Volvo 244 1982
  • 2.1L L4 2127CC
  • Naturally Aspirated
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Volvo 244 1983
  • 2.3L L4 2316CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Volvo 244 1988
  • 2.3L L4 2316CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • with Exhaust Gas Recirculation (EGR)
  • Cutting and Welding Required During Installation
Volvo 244 1989
  • 2.3L L4 2316CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • with Exhaust Gas Recirculation (EGR)
  • Cutting and Welding Required During Installation
Volvo 245 1975
  • 2L L4 1990CC/121CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Volvo 245 1976
  • 2.1L L4 2127CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Volvo 245 1977
  • 2.1L L4 2127CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Volvo 245 1978
  • 2.1L L4 2127CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Volvo 245 1979
  • 2.1L L4 2127CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Volvo 245 1980
  • 2.1L L4 2127CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Volvo 245 1981
  • 2.1L L4 2127CC
  • Naturally Aspirated
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Volvo 245 1982
  • 2.1L L4 2127CC
  • Naturally Aspirated
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Volvo 245 1983
  • 2.3L L4 2316CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Volvo 245 1988
  • 2.3L L4 2316CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • with Exhaust Gas Recirculation (EGR)
  • Cutting and Welding Required During Installation
Volvo 245 1989
  • 2.3L L4 2316CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • with Exhaust Gas Recirculation (EGR)
  • Cutting and Welding Required During Installation
Volvo 262 1976
  • 2.7L V6 2673CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Volvo 262 1978
  • 2.7L V6 2673CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Volvo 262 1979
  • 2.7L V6 2673CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Volvo 262 1980
  • 2.8L V6 2849CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Volvo 262 1981
  • 2.8L V6 2849CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Volvo 264 1976
  • 2.7L V6 2673CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Volvo 264 1977
  • 2.7L V6 2673CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Volvo 264 1978
  • 2.7L V6 2673CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Volvo 264 1979
  • 2.7L V6 2673CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Volvo 264 1980
  • 2.8L V6 2849CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Volvo 264 1981
  • 2.8L V6 2849CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Volvo 264 1982
  • 2.8L V6 2849CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Volvo 265 1976
  • 2.7L V6 2673CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Volvo 265 1977
  • 2.7L V6 2673CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Volvo 265 1978
  • 2.7L V6 2673CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Volvo 265 1979
  • 2.7L V6 2673CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Volvo 265 1980
  • 2.8L V6 2849CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Volvo 265 1981
  • 2.8L V6 2849CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Volvo 760 1983
  • 2.8L V6 2849CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Volvo 760 1984
  • 2.8L V6 2849CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Volvo 760 1985
  • 2.8L V6 2849CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Volvo 760 1986
  • 2.8L V6 2849CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
© 2014 — 2023 VinniStore Corp. Tous Droits Réservés