100% BASÉ AU CANADA 100% CANADIEN
SANS FRAIS DE COURTAGE EN DOUANE SANS FRAIS DE DOUANE
MARCHAND AUTORISÉ MARCHAND AUTORISÉ
30 JOURS – RETOURS SANS TRACAS 30 JOURS – RETOURS

MagnaFlowUniversal Stainless Steel CARB PRE-OBDII Catalytic Converter (2" IN\/2" OUT)

DISTRIBUTEUR AUTORISÉ

338004

Numéro de Pièce du Fabricant
*Les images sont à titre illustratif seulement. Le produit réel peut varier.
SKU: MAG-338004
Sélectionnez un véhicule pour vérifier la compatibilité.

Sélectionnez un Véhicule

Cela servira à vous montrer les pièces compatibles.

Auto Parts Finder

Ce produit n'est pas compatible avec votre sélection!

Le produit affiché sur cette page n'est pas compatible avec vehicle

!
Afin d'assurer la bonne compatibilité des pièces, veuillez parcourir des produits compatibles ou changer votre sélection.


Changer la Sélection Actuelle
Livraison GRATUITE*
Garantie Standard

Commande Spéciale
1-3 Semaines
357,00 CA $
Universal Stainless Steel CARB PRE-OBDII Catalytic Converter (2" IN\/2" OUT) doit être acheté par multiple de 1
DISTRIBUTEUR AUTORISÉ

338004

Numéro de Pièce du Fabricant
Plus d’information
Fabricant MagnaFlow
Numéro de Pièce du Fabricant 338004
Prix de Détail Suggéré du Fabricant (MSRP) 172,26
Rédigez votre propre commentaire
Seuls les utilisateurs sauvegardés peuvent soumettre leur avis. Veuillez vous connecter ou créer un compte
This table represents all the 117 compatible vehicles for this part:
Marque Modèle Année
Application Notes
Position Engine Additional Information
American Motors Concord 1980
  • Rear
  • 2.5L L4 151CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
American Motors Concord 1981
  • Rear
  • 2.5L L4 151CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
American Motors Concord 1982
  • Rear
  • 2.5L L4 151CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
American Motors Gremlin 1978
  • Rear
  • 2L L4 121CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
American Motors Spirit 1981
  • Rear
  • 2.5L L4 151CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
American Motors Spirit 1982
  • Rear
  • 2.5L L4 151CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Chrysler Cordoba 1980
  • Rear
  • 3.7L L6 3687CC/225CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Chrysler Cordoba 1981
  • Rear
  • 3.7L L6 3687CC/225CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Chrysler Cordoba 1982
  • Rear
  • 3.7L L6 3687CC/225CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Chrysler Cordoba 1983
  • Rear
  • 3.7L L6 3687CC/225CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Chrysler LeBaron 1980
  • Rear
  • 3.7L L6 3687CC/225CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Chrysler New Yorker 1982
  • Rear
  • 3.7L L6 3687CC/225CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Diplomat 1980
  • Rear
  • 3.7L L6 3687CC/225CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Diplomat 1981
  • Rear
  • 3.7L L6 3687CC/225CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Mirada 1980
  • Rear
  • 3.7L L6 3687CC/225CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Mirada 1981
  • Rear
  • 3.7L L6 3687CC/225CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Mirada 1983
  • Rear
  • 3.7L L6 3687CC/225CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Omni 1983
  • Rear
  • 1.6L L4 1595CC/97cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Country Squire 1989
  • Rear Right
  • 5L V8 302CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Country Squire 1990
  • Rear Right
  • 5L V8 302CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Country Squire 1991
  • Rear Right
  • 5L V8 302CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Crown Victoria 1993
  • Rear Right
  • 4.6L V8 281CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Crown Victoria 1994
  • Rear Right
  • 4.6L V8 281CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Fairmont 1980
  • Rear
  • 4.2L V8 255CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Fairmont 1982
  • Rear
  • 3.3L L6 200CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Fairmont 1983
  • Rear
  • 3.3L L6 200CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Granada 1980
  • Rear
  • 4.2L V8 255CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Granada 1982
  • Rear
  • 2.3L L4 140CID
  • 3.3L L6 200CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford LTD Crown Victoria 1990
  • Rear Right
  • 5L V8 302CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford LTD Crown Victoria 1991
  • Rear Right
  • 5L V8 302CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Mustang 1980
  • Rear
  • 3.3L L6 200CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Mustang 1981
  • Rear
  • 3.3L L6 200CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Mustang 1987
  • Rear
  • 2.3L L4 140CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Mustang 1988
  • Rear
  • 2.3L L4 140CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Mustang 1989
  • Rear
  • 2.3L L4 140CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Mustang 1990
  • Rear
  • 2.3L L4 140CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Mustang 1991
  • Rear
  • 2.3L L4 140CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Mustang 1992
  • Rear
  • 2.3L L4 140CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Mustang 1993
  • Rear
  • 2.3L L4 140CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Infiniti Q45 1990
  • Rear Right
  • 4.5L V8 4494CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Infiniti Q45 1991
  • Rear Left
  • Rear Right
  • 4.5L V8 4494CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Infiniti Q45 1992
  • Rear Left
  • Rear Right
  • 4.5L V8 4494CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Infiniti Q45 1993
  • Rear Left
  • Rear Right
  • 4.5L V8 4494CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Infiniti Q45 1994
  • Rear Left
  • Rear Right
  • 4.5L V8 4494CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Infiniti Q45 1995
  • Rear Left
  • 4.5L V8 4494CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Jaguar XJS 1976
  • Rear
  • 5.3L V12 5343CC
  • Certification Level : PRE-OBDII
  • Cutting and Welding Required During Installation
Jaguar XJS 1978
  • Rear
  • 5.3L V12 5343CC
  • Certification Level : PRE-OBDII
  • Cutting and Welding Required During Installation
Jaguar XJS 1982
  • Rear
  • 5.3L V12 5343CC
  • USA
  • Certification Level : PRE-OBDII
  • Cutting and Welding Required During Installation
  • CAN
Jaguar XJS 1983
  • Rear
  • 5.3L V12 5343CC
  • USA
  • Certification Level : PRE-OBDII
  • Cutting and Welding Required During Installation
  • CAN
Jaguar XJS 1984
  • Rear
  • 5.3L V12 5343CC
  • USA
  • Certification Level : PRE-OBDII
  • Cutting and Welding Required During Installation
  • CAN
Jaguar XJS 1987
  • Rear
  • 5.3L V12 5343CC
  • USA
  • Certification Level : PRE-OBDII
  • Cutting and Welding Required During Installation
  • CAN
Lincoln Continental 1986
  • Rear Left
  • Rear Right
  • 5L V8 302CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Lincoln Continental 1987
  • Rear Left
  • Rear Right
  • 5L V8 302CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Lincoln Town Car 1986
  • Rear Left
  • Rear Right
  • 5L V8 302CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Lincoln Town Car 1987
  • Rear Left
  • Rear Right
  • 5L V8 302CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Lincoln Town Car 1988
  • Rear Left
  • Rear Right
  • 5L V8 302CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Lincoln Town Car 1989
  • Rear Right
  • 5L V8 302CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Lincoln Town Car 1990
  • Rear Left
  • Rear Right
  • 5L V8 302CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Lincoln Town Car 1993
  • Rear Right
  • 4.6L V8 281CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Lincoln Town Car 1994
  • Rear Right
  • 4.6L V8 281CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Lincoln Versailles 1980
  • Rear
  • 5L V8 302CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda 626 1981
  • Rear
  • 2L L4 1970CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda 626 1982
  • Rear
  • 2L L4 1970CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda RX-7 1984
  • Rear
  • 1.3L R2 1308CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda RX-7 1985
  • Rear
  • 1.1L R2 1146CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercedes-Benz 190E 1987
  • Rear
  • 2.3L L4 2299CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercedes-Benz 190E 1988
  • 2.3L L4 2299CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercedes-Benz 190E 1991
  • 2.3L L4 2299CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercedes-Benz 190E 1993
  • 2.3L L4 2299CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercedes-Benz 280CE 1980
  • Rear
  • 2.8L L6 2746CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercedes-Benz 280CE 1981
  • Rear
  • 2.8L L6 2778CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercedes-Benz 280E 1980
  • Rear
  • 2.8L L6 2746CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercedes-Benz 280E 1981
  • Rear
  • 2.8L L6 2778CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercedes-Benz 280SE 1980
  • Rear
  • 2.8L L6 2746CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercedes-Benz 380SE 1984
  • Rear
  • 3.8L V8 3839CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercedes-Benz 380SE 1985
  • Rear
  • 3.8L V8 3839CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercedes-Benz 380SEC 1982
  • Rear
  • 3.8L V8 3839CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercedes-Benz 380SEC 1983
  • Rear
  • 3.8L V8 3839CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercedes-Benz 380SEL 1981
  • Rear
  • 3.8L V8 3839CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercedes-Benz 380SEL 1982
  • Rear
  • 3.8L V8 3839CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercedes-Benz 380SEL 1983
  • Rear
  • 3.8L V8 3839CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercury Capri 1980
  • Rear
  • 3.3L L6 200CID
  • 4.2L V8 255CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercury Capri 1982
  • Rear
  • 3.3L L6 200CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercury Colony Park 1987
  • Rear
  • 5L V8 302CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercury Colony Park 1988
  • Rear
  • 5L V8 302CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercury Colony Park 1989
  • Rear
  • 5L V8 302CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercury Colony Park 1990
  • Rear
  • 5L V8 302CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercury Colony Park 1991
  • Rear
  • 5L V8 302CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercury Cougar 1980
  • Rear
  • 4.2L V8 255CID
  • 5L V8 302CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercury Grand Marquis 1979
  • Rear
  • 5L V8 302CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercury Grand Marquis 1980
  • Rear
  • 5L V8 302CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercury Marquis 1979
  • Rear
  • 5L V8 302CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercury Marquis 1980
  • Rear
  • 5L V8 302CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercury Marquis 1983
  • Rear
  • 3.3L L6 200CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercury Monarch 1980
  • Rear
  • 4.2L V8 255CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercury Zephyr 1980
  • Rear
  • 3.3L L6 200CID
  • 4.2L V8 255CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercury Zephyr 1982
  • Rear
  • 3.3L L6 200CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan Pulsar 1983
  • Rear
  • 1.6L L4 1597CC/97cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan Sentra 1983
  • Rear
  • 1.6L L4 1597CC/97cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan Sentra 1984
  • Rear
  • 1.6L L4 1597CC/97cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan Sentra 1985
  • Rear
  • 1.6L L4 1597CC/97cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan Sentra 1986
  • Rear
  • 1.6L L4 1597CC/97cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Plymouth Gran Fury 1980
  • Rear
  • 3.7L L6 3687CC/225CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Plymouth Gran Fury 1981
  • Rear
  • 3.7L L6 3687CC/225CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Plymouth Horizon 1983
  • Rear
  • 1.6L L4 1595CC/97cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru DL 1983
  • Rear
  • 1.6L H4 1595CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru DL 1984
  • Rear
  • 1.6L H4 1595CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru GL 1986
  • Rear
  • 1.6L H4 1595CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru GL 1987
  • Rear
  • 1.6L H4 1595CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru RX 1987
  • Rear
  • 1.8L H4 1781CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru RX 1988
  • Rear
  • 1.8L H4 1781CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru RX 1989
  • Rear
  • 1.8L H4 1781CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru Standard 1983
  • Rear
  • 1.6L H4 1595CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru Standard 1984
  • Rear
  • 1.6L H4 1595CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru Standard 1985
  • Rear
  • 1.6L H4 1595CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru Standard 1986
  • Rear
  • 1.6L H4 1595CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru Standard 1987
  • Rear
  • 1.6L H4 1595CC
  • 1.8L H4 1781CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
  • CAN