100% BASÉ AU CANADA 100% CANADIEN
SANS FRAIS DE COURTAGE EN DOUANE SANS FRAIS DE DOUANE
MARCHAND AUTORISÉ MARCHAND AUTORISÉ
30 JOURS – RETOURS SANS TRACAS 30 JOURS – RETOURS

MagnaFlowStainless Federal Heavy Metal Catalytic Converter without Sensor Port (2" IN\/2" OUT)

DISTRIBUTEUR AUTORISÉ

99304HM

Numéro de Pièce du Fabricant
*Les images sont à titre illustratif seulement. Le produit réel peut varier.
SKU: MAG-99304HM
Sélectionnez un véhicule pour vérifier la compatibilité.

Sélectionnez un Véhicule

Cela servira à vous montrer les pièces compatibles.

Auto Parts Finder

Ce produit n'est pas compatible avec votre sélection!

Le produit affiché sur cette page n'est pas compatible avec vehicle

!
Afin d'assurer la bonne compatibilité des pièces, veuillez parcourir des produits compatibles ou changer votre sélection.


Changer la Sélection Actuelle
Livraison GRATUITE*
Garantie Standard

Commande Spéciale
1-3 Semaines
258,00 CA $
Stainless Federal Heavy Metal Catalytic Converter without Sensor Port (2" IN\/2" OUT) doit être acheté par multiple de 1
DISTRIBUTEUR AUTORISÉ

99304HM

Numéro de Pièce du Fabricant
Plus d’information
Fabricant MagnaFlow
Numéro de Pièce du Fabricant 99304HM
Prix de Détail Suggéré du Fabricant (MSRP) 162,78
Rédigez votre propre commentaire
Seuls les utilisateurs sauvegardés peuvent soumettre leur avis. Veuillez vous connecter ou créer un compte
This table represents all the 55 compatible vehicles for this part:
Marque Modèle Année
Application Notes
Position Submodel Transmission Engine Aspiration Additional Information
Audi A6 Quattro 2000
  • Rear Left
  • Rear Right
  • Automatic
  • 2.8L V6
  • Cutting and Welding Required During Installation
Audi A6 Quattro 2001
  • Rear Left
  • Rear Right
  • Automatic
  • 2.8L V6
  • Cutting and Welding Required During Installation
Audi A6 2001
  • Rear Left
  • Rear Right
  • 2.8L V6
  • Cutting and Welding Required During Installation
Buick Century 1996
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Buick Regal 1996
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Buick Skylark 1996
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Buick Skylark 1997
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Buick Skylark 1998
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Chevrolet Beretta 1996
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Chevrolet Corsica 1996
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Chevrolet Lumina 1996
  • 3.1L V6 189CID
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Chevrolet Lumina 1997
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Chevrolet Monte Carlo 1996
  • 3.1L V6 189CID
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Chevrolet Monte Carlo 1997
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Hyundai Santa Fe 2001
  • Rear
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Hyundai Santa Fe 2002
  • Rear
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Hyundai Santa Fe 2003
  • Rear
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Hyundai Santa Fe 2004
  • Rear
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Hyundai Tiburon 2003
  • 2.7L V6 2656CC
  • Cutting and Welding Required During Installation
Hyundai Tiburon 2004
  • 2.7L V6 2656CC
  • Cutting and Welding Required During Installation
Hyundai Tiburon 2005
  • 2.7L V6 2656CC
  • Cutting and Welding Required During Installation
Hyundai Tiburon 2006
  • 2.7L V6 2656CC
  • Cutting and Welding Required During Installation
Hyundai Tiburon 2007
  • 2.7L V6 2656CC
  • Cutting and Welding Required During Installation
Hyundai Tiburon 2008
  • 2.7L V6 2656CC
  • Cutting and Welding Required During Installation
Mercedes-Benz ML320 1998
  • Front Left
  • Left Center
  • 3.2L V6 3199CC
  • Cutting and Welding Required During Installation
Oldsmobile Achieva 1996
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Oldsmobile Achieva 1997
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Ciera 1996
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Supreme 1996
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Pontiac Grand Am 1996
  • SE
  • GT
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Pontiac Grand Prix 1996
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Scion xA 2004
  • 1.5L L4 1497CC
  • Cutting and Welding Required During Installation
Scion xA 2005
  • 1.5L L4 1497CC
  • Cutting and Welding Required During Installation
Scion xA 2006
  • 1.5L L4 1497CC
  • Cutting and Welding Required During Installation
Scion xB 2004
  • 1.5L L4 1497CC
  • Cutting and Welding Required During Installation
Scion xB 2005
  • 1.5L L4 1497CC
  • Cutting and Welding Required During Installation
Scion xB 2006
  • 1.5L L4 1497CC
  • Cutting and Welding Required During Installation
Subaru Legacy 2006
  • Rear
  • 2.5L H4 2458CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Subaru Legacy 2007
  • Rear
  • 2.5L H4 2458CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Subaru Legacy 2008
  • Rear
  • 2.5L H4 2458CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Subaru Outback 2006
  • Rear
  • 2.5L H4 2458CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Subaru Outback 2007
  • Rear
  • 2.5L H4 2458CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Suzuki Esteem 1999
  • Front
  • 1.8L L4 1790CC
  • Cutting and Welding Required During Installation
Suzuki Esteem 2000
  • Front
  • 1.8L L4 1790CC
  • Cutting and Welding Required During Installation
Suzuki Esteem 2001
  • Front
  • 1.8L L4 1790CC
  • Cutting and Welding Required During Installation
Suzuki Esteem 2002
  • Front
  • 1.8L L4 1790CC
  • Cutting and Welding Required During Installation
Toyota Echo 2000
  • 1.5L L4 1497CC
  • Cutting and Welding Required During Installation
Toyota Echo 2001
  • 1.5L L4 1497CC
  • Cutting and Welding Required During Installation
Toyota Echo 2002
  • 1.5L L4 1497CC
  • Cutting and Welding Required During Installation
Toyota Echo 2003
  • 1.5L L4 1497CC
  • Cutting and Welding Required During Installation
Toyota Echo 2004
  • 1.5L L4 1497CC
  • Cutting and Welding Required During Installation
Toyota Echo 2005
  • 1.5L L4 1497CC
  • Cutting and Welding Required During Installation
Volkswagen Golf 1996
  • 1.8L L4 1788CC/109CID
  • Cutting and Welding Required During Installation
  • CAN
Volkswagen Golf 1997
  • 1.8L L4 1788CC/109CID
  • Cutting and Welding Required During Installation
  • CAN
Volvo S70 1998
  • 2.4L L5 2435CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation