100% BASÉ AU CANADA 100% CANADIEN
SANS FRAIS DE COURTAGE EN DOUANE SANS FRAIS DE DOUANE
MARCHAND AUTORISÉ MARCHAND AUTORISÉ
30 JOURS – RETOURS SANS TRACAS 30 JOURS – RETOURS

MagnaFlowStainless Federal Catalytic Converter without Sensor Port (2.5" IN\/2.5" OUT)

DISTRIBUTEUR AUTORISÉ

94106

Numéro de Pièce du Fabricant
*Les images sont à titre illustratif seulement. Le produit réel peut varier.
SKU: MAG-94106
Sélectionnez un véhicule pour vérifier la compatibilité.

Sélectionnez un Véhicule

Cela servira à vous montrer les pièces compatibles.

Auto Parts Finder

Ce produit n'est pas compatible avec votre sélection!

Le produit affiché sur cette page n'est pas compatible avec vehicle

!
Afin d'assurer la bonne compatibilité des pièces, veuillez parcourir des produits compatibles ou changer votre sélection.


Changer la Sélection Actuelle
Livraison GRATUITE*
Garantie Standard

Commande Spéciale
1-3 Semaines
157,00 CA $
Stainless Federal Catalytic Converter without Sensor Port (2.5" IN\/2.5" OUT) doit être acheté par multiple de 1
DISTRIBUTEUR AUTORISÉ

94106

Numéro de Pièce du Fabricant
Plus d’information
Fabricant MagnaFlow
Numéro de Pièce du Fabricant 94106
Prix de Détail Suggéré du Fabricant (MSRP) 111,27
Rédigez votre propre commentaire
Seuls les utilisateurs sauvegardés peuvent soumettre leur avis. Veuillez vous connecter ou créer un compte
This table represents all the 64 compatible vehicles for this part:
Marque Modèle Année
Application Notes
Position Submodel Transmission Engine Aspiration Additional Information
Cadillac Eldorado 1979
  • 5.7L V8 350CID
  • DIESEL
  • Cutting and Welding Required During Installation
Cadillac Seville 1978
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Cadillac Seville 1979
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet Corvette 1992
  • Right
  • Left
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet Corvette 1993
  • Right
  • Left
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet Corvette 1994
  • Right
  • Left
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet Corvette 1995
  • Right
  • Left
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chrysler Daytona 1987
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
  • CAN
Chrysler Daytona 1989
  • 2.5L L4 2507CC/153CID
  • Turbocharged
  • Cutting and Welding Required During Installation
  • CAN
Chrysler Daytona 1990
  • 2.5L L4 2507CC/153CID
  • Naturally Aspirated
  • Turbocharged
  • Cutting and Welding Required During Installation
  • CAN
Chrysler Daytona 1991
  • 2.5L L4 2507CC/153CID
  • Turbocharged
  • Cutting and Welding Required During Installation
  • CAN
Chrysler Daytona 1992
  • 2.2L L4 135CID
  • 2.5L L4 2507CC/153CID
  • Turbocharged
  • Cutting and Welding Required During Installation
  • CAN
Chrysler Daytona 1993
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
  • CAN
Chrysler Dynasty 1989
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
  • CAN
Chrysler Dynasty 1990
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
  • CAN
Chrysler Dynasty 1991
  • 3.3L V6 201CID
  • Cutting and Welding Required During Installation
  • CAN
Chrysler Dynasty 1992
  • 3.3L V6 201CID
  • Cutting and Welding Required During Installation
  • CAN
Chrysler Dynasty 1993
  • 3.3L V6 201CID
  • Cutting and Welding Required During Installation
  • CAN
Chrysler New Yorker 1991
  • 3.3L V6 3301CC/201CID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
Dodge W150 1977
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Ford Bronco II 1988
  • 2.9L V6 177CID
  • Cutting and Welding Required During Installation
Ford Bronco II 1989
  • 2.9L V6 177CID
  • Cutting and Welding Required During Installation
Ford Bronco II 1990
  • 2.9L V6 177CID
  • Cutting and Welding Required During Installation
Ford E-100 Econoline 1983
  • 5.8L V8 351CID
  • without Air Tube
  • Cutting and Welding Required During Installation
Ford E-100 Econoline Club Wagon 1983
  • 5.8L V8 351CID
  • without Air Tube
  • Cutting and Welding Required During Installation
Ford Explorer 1991
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford Explorer 1992
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford Explorer 1993
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford Explorer 1994
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford Explorer 1995
  • Front
  • Rear
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford F-150 1994
  • Front Left
  • Rear Left
  • Front Right
  • Rear Right
  • Lightning
  • 5.8L V8 351CID
  • R
  • Cutting and Welding Required During Installation
Ford F-150 1995
  • Front Left
  • Rear Left
  • Front Right
  • Rear Right
  • Lightning
  • 5.8L V8 351CID
  • R
  • Cutting and Welding Required During Installation
Ford Ranger 1988
  • 2.9L V6 177CID
  • Cutting and Welding Required During Installation
Ford Ranger 1989
  • 2.9L V6 177CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford Ranger 1990
  • 2.9L V6 177CID
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford Ranger 1991
  • 2.9L V6 177CID
  • 4L V6 245CID
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Ford Ranger 1992
  • 2.9L V6 177CID
  • 4L V6 245CID
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Ford Ranger 1993
  • 4L V6 245CID
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Ford Ranger 1994
  • 4L V6 245CID
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Honda Passport 1994
  • Rear
  • Automatic
  • 3.2L V6 3165CC
  • Cutting and Welding Required During Installation
Honda Passport 1995
  • Rear
  • Automatic
  • 3.2L V6 3165CC
  • Cutting and Welding Required During Installation
Isuzu Rodeo 1994
  • Rear
  • Automatic
  • 3.2L V6 3165CC
  • Cutting and Welding Required During Installation
Isuzu Rodeo 1995
  • Rear
  • Automatic
  • 3.2L V6 3165CC
  • Cutting and Welding Required During Installation
Lexus ES300 1994
  • 3L V6 2995CC
  • without Air Tube
  • Cutting and Welding Required During Installation
Mazda B3000 1997
  • Rear
  • Front
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
  • CAN
Mazda Navajo 1991
  • 4L V6 245CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Mazda Navajo 1992
  • 4L V6 245CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Mazda Navajo 1993
  • 4L V6 245CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Mazda Navajo 1994
  • 4L V6 245CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Nissan 200SX 1987
  • 1.8L L4 1809CC
  • Cutting and Welding Required During Installation
  • CAN
Oldsmobile 98 1978
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Oldsmobile 98 1979
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Oldsmobile Toronado 1979
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Peugeot 505 1989
  • 2.2L L4 2155CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Plymouth Gran Fury 1975
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • with Single Exhaust
  • Cutting and Welding Required During Installation
Pontiac Bonneville 1977
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Pontiac Grand Safari 1977
  • 4.9L V8 301CID
  • Cutting and Welding Required During Installation
Pontiac Laurentian 1977
  • 5.7L V8 350CID
  • 5.7L V8 5733CC/350CID
  • Cutting and Welding Required During Installation
  • CAN
Pontiac Laurentian 1978
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
  • CAN
Pontiac Laurentian 1979
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
  • CAN
Pontiac Sunburst 1985
  • 1.5L L4 1471CC/92cCID
  • Cutting and Welding Required During Installation
  • CAN
Pontiac Sunburst 1986
  • 1.5L L4 1471CC/92cCID
  • Cutting and Welding Required During Installation
  • CAN
Pontiac Sunburst 1987
  • 1.5L L4 1471CC/92cCID
  • Cutting and Welding Required During Installation
  • CAN
Saab 9000 1990
  • 2L L4 1985CC
  • Cutting and Welding Required During Installation
  • CAN