Grève chez Postes CanadaExpédition via d'autres transporteurs, sauf cases postalesLéger délais en transit attendus
100% BASÉ AU CANADA 100% CANADIEN
SANS FRAIS DE COURTAGE EN DOUANE SANS FRAIS DE DOUANE
MARCHAND AUTORISÉ MARCHAND AUTORISÉ
30 JOURS – RETOURS SANS TRACAS 30 JOURS – RETOURS

MagnaFlowStainless Federal Heavy Metal Catalytic Converter without Sensor Port (2.5" IN\/2x2" OUT)

DISTRIBUTEUR AUTORISÉ

99007HM

Numéro de Pièce du Fabricant
*Les images sont à titre illustratif seulement. Le produit réel peut varier.
SKU: MAG-99007HM
Sélectionnez un véhicule pour vérifier la compatibilité.

Sélectionnez un Véhicule

Cela servira à vous montrer les pièces compatibles.

Auto Parts Finder

Ce produit n'est pas compatible avec votre sélection!

Le produit affiché sur cette page n'est pas compatible avec vehicle

!
Afin d'assurer la bonne compatibilité des pièces, veuillez parcourir des produits compatibles ou changer votre sélection.


Changer la Sélection Actuelle
Livraison GRATUITE*
Garantie Standard

Commande Spéciale
1-3 Semaines
449,00 CA $
Stainless Federal Heavy Metal Catalytic Converter without Sensor Port (2.5" IN\/2x2" OUT) doit être acheté par multiple de 1
DISTRIBUTEUR AUTORISÉ

99007HM

Numéro de Pièce du Fabricant
Plus d’information
Fabricant MagnaFlow
Numéro de Pièce du Fabricant 99007HM
Prix de Détail Suggéré du Fabricant (MSRP) 203,86
Rédigez votre propre commentaire
Seuls les utilisateurs sauvegardés peuvent soumettre leur avis. Veuillez vous connecter ou créer un compte
This table represents all the 48 compatible vehicles for this part:
Marque Modèle Année
Application Notes
Position Drive Type Engine Aspiration Additional Information
Chrysler Concorde 1996
  • Rear
  • 3.5L V6 3497CC/215CID
  • 3.3L V6 3301CC/201CID
  • Cutting and Welding Required During Installation
Chrysler Concorde 1997
  • Rear
  • 3.5L V6 3497CC/215CID
  • Cutting and Welding Required During Installation
Chrysler Intrepid 1993
  • Rear
  • 3.3L V6 3301CC/201CID
  • 3.5L V6 3497CC/215CID
  • Cutting and Welding Required During Installation
  • CAN
Chrysler Intrepid 1994
  • Rear
  • 3.3L V6 201CID
  • 3.5L V6 3497CC/215CID
  • Cutting and Welding Required During Installation
  • CAN
Chrysler Intrepid 1995
  • Rear
  • 3.3L V6 3301CC/201CID
  • 3.5L V6 3497CC/215CID
  • GAS
  • Cutting and Welding Required During Installation
  • CAN
Chrysler Intrepid 1996
  • Rear
  • 3.3L V6 3301CC/201CID
  • 3.5L V6 3497CC/215CID
  • Cutting and Welding Required During Installation
  • CAN
Chrysler Intrepid 1997
  • Rear
  • 3.3L V6 3301CC/201CID
  • 3.5L V6 3497CC/215CID
  • Cutting and Welding Required During Installation
  • CAN
Chrysler LHS 1996
  • Rear
  • 3.5L V6 3497CC/215CID
  • Cutting and Welding Required During Installation
Chrysler LHS 1997
  • Rear
  • 3.5L V6 3497CC/215CID
  • Cutting and Welding Required During Installation
Chrysler New Yorker 1996
  • Rear
  • 3.5L V6 3497CC/215CID
  • Cutting and Welding Required During Installation
Dodge Dakota 2000
  • 4WD
  • 4.7L V8 287CID
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Dodge Dakota 2001
  • 4WD
  • 4.7L V8 287CID
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Dodge Dakota 2002
  • 4WD
  • 4.7L V8 287CID
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Dodge Dakota 2003
  • 4WD
  • 4.7L V8 287CID
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Dodge Intrepid 1996
  • Rear
  • 3.5L V6 3497CC/215CID
  • 3.3L V6 3301CC/201CID
  • Cutting and Welding Required During Installation
Dodge Intrepid 1997
  • Rear
  • 3.5L V6 3497CC/215CID
  • 3.3L V6 3301CC/201CID
  • Cutting and Welding Required During Installation
Eagle Vision 1996
  • Rear
  • 3.5L V6 3497CC/215CID
  • 3.3L V6 3301CC/201CID
  • Cutting and Welding Required During Installation
Eagle Vision 1997
  • Rear
  • 3.5L V6 3497CC/215CID
  • 3.3L V6 3301CC/201CID
  • Cutting and Welding Required During Installation
Ford Bronco 1996
  • Front
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline 1996
  • Front
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline Club Wagon 1996
  • Front
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-250 Econoline 1996
  • Front
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • To 8,500lbs. Gross Vehicle Weight
  • Cutting and Welding Required During Installation
Ford E-350 Econoline 1996
  • Front
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-350 Econoline Club Wagon 1996
  • Front
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford F-250 HD 1997
  • Front
  • 5.8L V8 351CID
  • To 8,500lbs. Gross Vehicle Weight
  • Cutting and Welding Required During Installation
Ford F-150 1996
  • Front
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford F-250 1996
  • Front
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
  • To 8,500lbs. Gross Vehicle Weight
Ford Thunderbird 1996
  • Rear
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Ford Thunderbird 1997
  • Rear
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Jaguar Vanden Plas 1996
  • Rear
  • 4L L6 3980CC
  • Cutting and Welding Required During Installation
Jaguar Vanden Plas 1997
  • Rear
  • 4L L6 3980CC
  • Cutting and Welding Required During Installation
Jaguar XJ6 1995
  • Rear
  • 4L L6 3980CC
  • Cutting and Welding Required During Installation
Jaguar XJ6 1996
  • Rear
  • 4L L6 3980CC
  • Cutting and Welding Required During Installation
Jaguar XJ6 1997
  • Rear
  • 4L L6 3980CC
  • Cutting and Welding Required During Installation
Mercedes-Benz SL320 1995
  • Right
  • Left
  • 3.2L L6 3199CC
  • Cutting and Welding Required During Installation
Mercury Cougar 1996
  • Rear
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Mercury Cougar 1997
  • Rear
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Subaru SVX 1996
  • Rear
  • 3.3L H6 3318CC
  • Cutting and Welding Required During Installation
Subaru SVX 1997
  • Rear
  • 3.3L H6 3318CC
  • Cutting and Welding Required During Installation
Toyota Supra 1996
  • Front
  • 3L L6 2997CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Toyota Supra 1997
  • Front
  • 3L L6 2997CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Toyota Supra 1998
  • Front
  • 3L L6 2997CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Toyota Tundra 2000
  • Rear
  • 4.7L V8 4663CC/285CID
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Toyota Tundra 2001
  • Rear
  • 4.7L V8 4663CC/285CID
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Toyota Tundra 2002
  • Rear
  • 4.7L V8 4663CC/285CID
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Volvo S80 1999
  • 2.9L L6 2917CC
  • Cutting and Welding Required During Installation
Volvo S80 2000
  • 2.9L L6 2917CC
  • Cutting and Welding Required During Installation
Volvo S80 2001
  • 2.9L L6 2917CC
  • Cutting and Welding Required During Installation