100% BASÉ AU CANADA 100% CANADIEN
SANS FRAIS DE COURTAGE EN DOUANE SANS FRAIS DE DOUANE
MARCHAND AUTORISÉ MARCHAND AUTORISÉ
30 JOURS – RETOURS SANS TRACAS 30 JOURS – RETOURS

MagnaFlowStainless Federal Catalytic Converter without Sensor Port (2" IN\/2" OUT)

DISTRIBUTEUR AUTORISÉ

93504

Numéro de Pièce du Fabricant
*Les images sont à titre illustratif seulement. Le produit réel peut varier.
SKU: MAG-93504
Sélectionnez un véhicule pour vérifier la compatibilité.

Sélectionnez un Véhicule

Cela servira à vous montrer les pièces compatibles.

Auto Parts Finder

Ce produit n'est pas compatible avec votre sélection!

Le produit affiché sur cette page n'est pas compatible avec vehicle

!
Afin d'assurer la bonne compatibilité des pièces, veuillez parcourir des produits compatibles ou changer votre sélection.


Changer la Sélection Actuelle
Livraison GRATUITE*
Garantie Standard

202,19 CA $  PRICE
Commande Spéciale
2-4 Weeks
202,19 CA $
Stainless Federal Catalytic Converter without Sensor Port (2" IN\/2" OUT) doit être acheté par multiple de 1
DISTRIBUTEUR AUTORISÉ

93504

Numéro de Pièce du Fabricant
Plus d’information
Fabricant MagnaFlow
Numéro de Pièce du Fabricant 93504
Prix de Détail Suggéré du Fabricant (MSRP) 180,31
Rédigez votre propre commentaire
Seuls les utilisateurs sauvegardés peuvent soumettre leur avis. Veuillez vous connecter ou créer un compte
This table represents all the 60 compatible vehicles for this part:
Marque Modèle Année
Application Notes
Position Engine Additional Information
Ford Aerostar 1986
  • 2.3L L4 140CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford Aerostar 1987
  • 2.3L L4 140CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford Crown Victoria 1992
  • Left
  • Right
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Ford Crown Victoria 1993
  • Left
  • Right
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Ford Crown Victoria 1994
  • Left
  • Right
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Ford Mustang 1994
  • Front Left
  • 3.8L V6 232CID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
  • Front and Rear
Ford Mustang 1995
  • Front Left
  • 3.8L V6 232CID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
  • Front and Rear
Lincoln Town Car 1991
  • Left
  • Right
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Lincoln Town Car 1992
  • Left
  • Right
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Lincoln Town Car 1993
  • Left
  • Right
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Lincoln Town Car 1994
  • Left
  • Right
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Mercedes-Benz 190E 1985
  • 2.3L L4 2299CC
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mercedes-Benz 280CE 1980
  • 2.8L L6 2746CC
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mercedes-Benz 280CE 1981
  • 2.8L L6 2778CC
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mercedes-Benz 280E 1980
  • 2.8L L6 2746CC
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mercedes-Benz 280E 1981
  • 2.8L L6 2778CC
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mercedes-Benz 280SE 1980
  • 2.8L L6 2746CC
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mercedes-Benz 380SE 1984
  • 3.8L V8 3839CC
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mercedes-Benz 380SE 1985
  • 3.8L V8 3839CC
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mercedes-Benz 380SEC 1982
  • 3.8L V8 3839CC
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mercedes-Benz 380SEC 1983
  • 3.8L V8 3839CC
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mercedes-Benz 380SEL 1981
  • 3.8L V8 3839CC
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mercedes-Benz 380SEL 1982
  • 3.8L V8 3839CC
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mercedes-Benz 380SEL 1983
  • 3.8L V8 3839CC
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mercedes-Benz 380SL 1981
  • 3.8L V8 3839CC
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mercedes-Benz 380SL 1982
  • 3.8L V8 3839CC
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mercedes-Benz 380SL 1983
  • 3.8L V8 3839CC
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mercedes-Benz 380SL 1984
  • 3.8L V8 3839CC
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mercedes-Benz 380SL 1985
  • 3.8L V8 3839CC
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mercedes-Benz 380SLC 1981
  • 3.8L V8 3839CC
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Merkur Scorpio 1988
  • 2.9L V6 177CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Merkur Scorpio 1989
  • 2.9L V6 177CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Mitsubishi Cordia 1983
  • 1.8L L4 1795CC
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mitsubishi Cordia 1984
  • 2L L4 1997CC/122CID
  • 1.8L L4 1795CC
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mitsubishi Cordia 1985
  • 2L L4 1997CC/122CID
  • 1.8L L4 1795CC
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mitsubishi Cordia 1986
  • 2L L4 1997CC/122CID
  • 1.8L L4 1795CC
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mitsubishi Cordia 1987
  • 2L L4 1997CC/122CID
  • 1.8L L4 1795CC
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mitsubishi Cordia 1988
  • 2L L4 1997CC/122CID
  • 1.8L L4 1795CC
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mitsubishi Mirage 1985
  • 1.6L L4 1597CC/98cCID
  • 1.5L L4 1468CC/90cCID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mitsubishi Mirage 1986
  • 1.6L L4 1597CC/98cCID
  • 1.5L L4 1468CC/90cCID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mitsubishi Starion 1983
  • 2.6L L4 2555CC/156CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mitsubishi Starion 1984
  • 2.6L L4 2555CC/156CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mitsubishi Starion 1985
  • 2.6L L4 2555CC/156CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mitsubishi Starion 1986
  • 2.6L L4 2555CC/156CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mitsubishi Starion 1987
  • 2.6L L4 2555CC/156CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mitsubishi Starion 1988
  • 2.6L L4 2555CC/156CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mitsubishi Starion 1989
  • 2.6L L4 2555CC/156CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mitsubishi Tredia 1983
  • 1.8L L4 1795CC
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mitsubishi Tredia 1984
  • 2L L4 1997CC/122CID
  • 1.8L L4 1795CC
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mitsubishi Tredia 1985
  • 2L L4 1997CC/122CID
  • 1.8L L4 1795CC
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mitsubishi Tredia 1986
  • 2L L4 1997CC/122CID
  • 1.8L L4 1795CC
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mitsubishi Tredia 1987
  • 2L L4 1997CC/122CID
  • 1.8L L4 1795CC
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mitsubishi Tredia 1988
  • 2L L4 1997CC/122CID
  • 1.8L L4 1795CC
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Toyota Celica 1979
  • 2.6L L6 2563CC
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Toyota Celica 1980
  • 2.6L L6 2563CC
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Toyota Celica 1981
  • 2.8L L6 2759CC
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Toyota Corolla 1981
  • 1.8L L4 1770CC
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Toyota Corolla 1982
  • 1.8L L4 1770CC
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Toyota Starlet 1983
  • 1.3L L4 1290CC
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Toyota Starlet 1984
  • 1.3L L4 1290CC
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation