100% BASÉ AU CANADA 100% CANADIEN
SANS FRAIS DE COURTAGE EN DOUANE SANS FRAIS DE DOUANE
MARCHAND AUTORISÉ MARCHAND AUTORISÉ
30 JOURS – RETOURS SANS TRACAS 30 JOURS – RETOURS

MagnaFlowStainless Federal Catalytic Converter without Sensor Ports (2.5" IN\/2.5" OUT)

DISTRIBUTEUR AUTORISÉ

93516

Numéro de Pièce du Fabricant
*Les images sont à titre illustratif seulement. Le produit réel peut varier.
SKU: MAG-93516
Sélectionnez un véhicule pour vérifier la compatibilité.

Sélectionnez un Véhicule

Cela servira à vous montrer les pièces compatibles.

Auto Parts Finder

Ce produit n'est pas compatible avec votre sélection!

Le produit affiché sur cette page n'est pas compatible avec vehicle

!
Afin d'assurer la bonne compatibilité des pièces, veuillez parcourir des produits compatibles ou changer votre sélection.


Changer la Sélection Actuelle
Livraison GRATUITE*
Garantie Standard

Commande Spéciale
2-4 Weeks
225,00 CA $
Stainless Federal Catalytic Converter without Sensor Ports (2.5" IN\/2.5" OUT) doit être acheté par multiple de 1
DISTRIBUTEUR AUTORISÉ

93516

Numéro de Pièce du Fabricant
Plus d’information
Fabricant MagnaFlow
Numéro de Pièce du Fabricant 93516
Prix de Détail Suggéré du Fabricant (MSRP) 166,40
Rédigez votre propre commentaire
Seuls les utilisateurs sauvegardés peuvent soumettre leur avis. Veuillez vous connecter ou créer un compte
This table represents all the 177 compatible vehicles for this part:
Marque Modèle Année
Application Notes
Position Transmission Drive Type Engine Additional Information
Cadillac DeVille 1994
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Cadillac Eldorado 1980
  • 5.7L V8 350CID
  • 6L V8 368CID
  • Cutting and Welding Required During Installation
  • without Air Tube
Cadillac Seville 1980
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet C10 Suburban 1978
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet C10 Suburban 1979
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet C10 Suburban 1980
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet C10 1978
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet C10 1979
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet C10 1980
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet C10 1981
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Dodge D100 1984
  • Rear
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge D100 1986
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Dodge D100 1987
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Dodge D100 1988
  • 5.9L V8 360CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Dodge D150 1982
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Dodge D150 1983
  • 5.2L V8 5211CC/318CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Dodge D150 1984
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Dodge D150 1985
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Dodge D150 1986
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Dodge D150 1987
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Dodge D150 1988
  • 5.9L V8 360CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Dodge Ram 2500 Pickup 2002
  • Left
  • Right
  • 8L V10 7990CC/488CID
  • Cutting and Welding Required During Installation
Dodge Ram 3500 Pickup 1994
  • Left
  • Right
  • 8L V10 7990CC/488CID
  • To 15,000lbs. Gross Vehicle Weight
  • Cutting and Welding Required During Installation
Dodge Ram 3500 Pickup 1995
  • Left
  • Right
  • 8L V10 7990CC/488CID
  • To 15,000lbs. Gross Vehicle Weight
  • Cutting and Welding Required During Installation
Dodge Ram 3500 Pickup 2002
  • Right
  • Left
  • 8L V10 7990CC/488CID
  • To 9,000lbs. Gross Vehicle Weight
  • Cutting and Welding Required During Installation
Ford Bronco 1984
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford Bronco 1985
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford Bronco 1986
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford Bronco 1987
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford Bronco 1988
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford Bronco 1989
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford Bronco 1990
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford Bronco 1991
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford Bronco 1992
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford Bronco 1993
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford Bronco 1994
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford Bronco 1995
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford E-100 Econoline 1981
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Ford E-100 Econoline 1982
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Ford E-100 Econoline Club Wagon 1981
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Ford E-100 Econoline Club Wagon 1982
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline 1981
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline 1982
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline 1984
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Front and Rear
  • Cutting and Welding Required During Installation
  • G
  • 2BBL
  • H
  • 4BBL
Ford E-150 Econoline 1985
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Front and Rear
  • Cutting and Welding Required During Installation
  • G
  • 2BBL
  • H
  • 4BBL
Ford E-150 Econoline 1986
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford E-150 Econoline 1987
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford E-150 Econoline 1988
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
  • Air Tap
Ford E-150 Econoline 1989
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
  • Air Tap
Ford E-150 Econoline 1990
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
  • Air Tap
Ford E-150 Econoline 1991
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
  • Air Tap
Ford E-150 Econoline 1992
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Air Tap
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford E-150 Econoline 1993
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Air Tap
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford E-150 Econoline 1994
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Air Tap
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford E-150 Econoline 1995
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Air Tap
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford E-150 Econoline Club Wagon 1981
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline Club Wagon 1982
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline Club Wagon 1984
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Front and Rear
  • Cutting and Welding Required During Installation
  • G
  • 2BBL
  • H
  • 4BBL
Ford E-150 Econoline Club Wagon 1985
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Front and Rear
  • Cutting and Welding Required During Installation
  • G
  • 2BBL
  • H
  • 4BBL
Ford E-150 Econoline Club Wagon 1986
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford E-150 Econoline Club Wagon 1987
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford E-150 Econoline Club Wagon 1988
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
  • Air Tap
Ford E-150 Econoline Club Wagon 1989
  • 5L V8 302CID
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford E-150 Econoline Club Wagon 1990
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
  • Air Tap
Ford E-150 Econoline Club Wagon 1991
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
  • Air Tap
Ford E-150 Econoline Club Wagon 1992
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Air Tap
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford E-150 Econoline Club Wagon 1993
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Air Tap
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford E-150 Econoline Club Wagon 1994
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Air Tap
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford E-150 Econoline Club Wagon 1995
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Air Tap
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford E-250 Econoline 1981
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Ford E-250 Econoline 1982
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Ford E-250 Econoline 1984
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Front and Rear
  • Cutting and Welding Required During Installation
  • G
  • 2BBL
  • H
  • 4BBL
Ford E-250 Econoline 1985
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Front and Rear
  • Cutting and Welding Required During Installation
  • G
  • 2BBL
  • H
  • 4BBL
Ford E-250 Econoline 1986
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford E-250 Econoline 1987
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford E-250 Econoline 1988
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
  • To 8,500lbs. Gross Vehicle Weight
  • 8,501lbs. To 8,600lbs. Gross Vehicle Weight
Ford E-250 Econoline 1989
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
  • To 8,500lbs. Gross Vehicle Weight
  • 8,501lbs. To 8,600lbs. Gross Vehicle Weight
Ford E-250 Econoline 1990
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
  • To 8,500lbs. Gross Vehicle Weight
  • 8,501lbs. To 8,600lbs. Gross Vehicle Weight
Ford E-250 Econoline 1991
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
  • To 8,500lbs. Gross Vehicle Weight
  • 8,501lbs. To 8,600lbs. Gross Vehicle Weight
Ford E-250 Econoline 1992
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • To 8,500lbs. Gross Vehicle Weight
  • Front and Rear
  • Cutting and Welding Required During Installation
  • 8,501lbs. To 8,600lbs. Gross Vehicle Weight
Ford E-250 Econoline 1993
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • To 8,500lbs. Gross Vehicle Weight
  • Front and Rear
  • Cutting and Welding Required During Installation
  • 8,501lbs. To 8,600lbs. Gross Vehicle Weight
Ford E-250 Econoline 1994
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • 8,501lbs. To 8,600lbs. Gross Vehicle Weight
  • Cutting and Welding Required During Installation
  • To 8,500lbs. Gross Vehicle Weight
  • Front and Rear
Ford E-250 Econoline 1995
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • 8,501lbs. To 8,600lbs. Gross Vehicle Weight
  • Cutting and Welding Required During Installation
  • To 8,500lbs. Gross Vehicle Weight
  • Front and Rear
Ford E-250 Econoline Club Wagon 1984
  • 5.8L V8 351CID
  • G
  • 2BBL
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford E-250 Econoline Club Wagon 1985
  • 5.8L V8 351CID
  • G
  • 2BBL
  • Front and Rear
  • Cutting and Welding Required During Installation
  • H
  • 4BBL
Ford E-250 Econoline Club Wagon 1986
  • 5.8L V8 351CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford E-250 Econoline Club Wagon 1987
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford E-250 Econoline Club Wagon 1988
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • To 8,500lbs. Gross Vehicle Weight
  • Front and Rear
  • Cutting and Welding Required During Installation
  • 8,501lbs. To 8,600lbs. Gross Vehicle Weight
Ford E-250 Econoline Club Wagon 1989
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • To 8,500lbs. Gross Vehicle Weight
  • Front and Rear
  • Cutting and Welding Required During Installation
  • 8,501lbs. To 8,600lbs. Gross Vehicle Weight
Ford E-250 Econoline Club Wagon 1990
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • To 8,500lbs. Gross Vehicle Weight
  • Front and Rear
  • Cutting and Welding Required During Installation
  • 8,501lbs. To 8,600lbs. Gross Vehicle Weight
Ford E-250 Econoline Club Wagon 1991
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • To 8,500lbs. Gross Vehicle Weight
  • Front and Rear
  • Cutting and Welding Required During Installation
  • 8,501lbs. To 8,600lbs. Gross Vehicle Weight
Ford E-350 Econoline 1984
  • 5.8L V8 351CID
  • G
  • 2BBL
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford E-350 Econoline 1985
  • 5.8L V8 351CID
  • G
  • 2BBL
  • Front and Rear
  • Cutting and Welding Required During Installation
  • H
Ford E-350 Econoline 1986
  • 5.8L V8 351CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford E-350 Econoline 1987
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford E-350 Econoline 1988
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford E-350 Econoline 1989
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford E-350 Econoline 1990
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford E-350 Econoline 1991
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford E-350 Econoline 1992
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford E-350 Econoline 1993
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford E-350 Econoline 1994
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford E-350 Econoline 1995
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford E-350 Econoline Club Wagon 1984
  • 5.8L V8 351CID
  • G
  • 2BBL
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford E-350 Econoline Club Wagon 1985
  • 5.8L V8 351CID
  • G
  • 2BBL
  • Front and Rear
  • Cutting and Welding Required During Installation
  • H
Ford E-350 Econoline Club Wagon 1986
  • 5.8L V8 351CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford E-350 Econoline Club Wagon 1987
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford E-350 Econoline Club Wagon 1988
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford E-350 Econoline Club Wagon 1989
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford E-350 Econoline Club Wagon 1990
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford E-350 Econoline Club Wagon 1991
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford E-350 Econoline Club Wagon 1992
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford E-350 Econoline Club Wagon 1993
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford E-350 Econoline Club Wagon 1994
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford E-350 Econoline Club Wagon 1995
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford F-150 1982
  • 5.8L V8 351CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford F-150 1983
  • 5.8L V8 351CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford F-150 1984
  • 5L V8 302CID
  • 5.8L V8 351CID
  • F
  • 2BBL
  • Front and Rear
  • Cutting and Welding Required During Installation
  • G
  • H
Ford F-150 1985
  • 5L V8 302CID
  • 5.8L V8 351CID
  • F
  • 2BBL
  • Front and Rear
  • Cutting and Welding Required During Installation
  • N
  • FI
  • G
  • H
Ford F-150 1986
  • 5L V8 302CID
  • 5.8L V8 351CID
  • N
  • FI
  • Front and Rear
  • Cutting and Welding Required During Installation
  • H
Ford F-150 1987
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
  • H
Ford F-150 1988
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford F-150 1989
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford F-150 1990
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford F-150 1991
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford F-150 1992
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford F-150 1993
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford F-150 1994
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
  • H
Ford F-150 1995
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
  • H
Ford F-250 1982
  • 5.8L V8 351CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford F-250 1983
  • 5.8L V8 351CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford F-250 1984
  • 5L V8 302CID
  • 5.8L V8 351CID
  • F
  • CARB
  • Front and Rear
  • Cutting and Welding Required During Installation
  • G
  • 2BBL
  • H
Ford F-250 1985
  • 5L V8 302CID
  • 5.8L V8 351CID
  • F
  • CARB
  • Front and Rear
  • Cutting and Welding Required During Installation
  • N
  • FI
  • G
  • 2BBL
  • H
Ford F-250 1986
  • 5L V8 302CID
  • 5.8L V8 351CID
  • N
  • FI
  • Front and Rear
  • Cutting and Welding Required During Installation
  • H
Ford F-250 1987
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • 7.5L V8 460CID
  • Front and Rear
  • Cutting and Welding Required During Installation
  • To 8,500lbs. Gross Vehicle Weight
  • Federal Emissions Equipped
  • To 8,600lbs. Gross Vehicle Weight
Ford F-250 1988
  • 5L V8 302CID
  • 4.9L L6 4917CC/300CID
  • 7.5L V8 460CID
  • Front and Rear
  • Cutting and Welding Required During Installation
  • Federal Emissions Equipped
  • To 8,600lbs. Gross Vehicle Weight
Ford F-250 1989
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • 7.5L V8 460CID
  • Front and Rear
  • Cutting and Welding Required During Installation
  • To 8,500lbs. Gross Vehicle Weight
  • Federal Emissions Equipped
  • To 8,600lbs. Gross Vehicle Weight
Ford F-250 1990
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • 7.5L V8 460CID
  • Front and Rear
  • Cutting and Welding Required During Installation
  • To 8,500lbs. Gross Vehicle Weight
  • Federal Emissions Equipped
  • To 8,600lbs. Gross Vehicle Weight
Ford F-250 1991
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • 7.5L V8 460CID
  • Front and Rear
  • Cutting and Welding Required During Installation
  • To 8,500lbs. Gross Vehicle Weight
  • Federal Emissions Equipped
  • To 8,600lbs. Gross Vehicle Weight
Ford F-250 1992
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • 7.5L V8 460CID
  • Front and Rear
  • Cutting and Welding Required During Installation
  • To 8,500lbs. Gross Vehicle Weight
  • Federal Emissions Equipped
  • To 8,600lbs. Gross Vehicle Weight
Ford F-250 1993
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • 7.5L V8 460CID
  • Front and Rear
  • Cutting and Welding Required During Installation
  • To 8,500lbs. Gross Vehicle Weight
  • Federal Emissions Equipped
  • To 8,600lbs. Gross Vehicle Weight
Ford F-250 1994
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
  • To 8,500lbs. Gross Vehicle Weight
Ford F-250 1995
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
  • To 8,500lbs. Gross Vehicle Weight
Ford F-350 1984
  • 5.8L V8 351CID
  • G
  • 2BBL
  • Front and Rear
  • Cutting and Welding Required During Installation
  • H
Ford F-350 1985
  • 5.8L V8 351CID
  • G
  • 2BBL
  • Front and Rear
  • Cutting and Welding Required During Installation
  • H
Ford F-350 1986
  • 5.8L V8 351CID
  • H
  • Cutting and Welding Required During Installation
Ford F-350 1987
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • H
  • Cutting and Welding Required During Installation
  • Front and Rear
Ford F-350 1988
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford F-350 1989
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford F-350 1990
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • CAN
  • Cutting and Welding Required During Installation
Ford F-350 1991
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • CAN
  • Cutting and Welding Required During Installation
Ford F-350 1992
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford F-350 1993
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford F-350 1994
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford F-350 1995
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford Mustang 1983
  • 5L V8 302CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Ford Mustang 1984
  • 5L V8 302CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Ford Mustang 1985
  • Standard
  • 5L V8 302CID
  • Dual Exhaust
  • Front and Rear
  • Cutting and Welding Required During Installation
GMC C1500 Suburban 1980
  • 5.7L V8 350CID
  • DIESEL
  • Cutting and Welding Required During Installation
GMC C15 1978
  • 5.7L V8 350CID
  • GAS
  • Cutting and Welding Required During Installation
  • DIESEL
  • Right
  • Left
GMC C25 1978
  • 5L V8 305CID
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC C1500 1981
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC C1500 1982
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC C2500 1980
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC K1500 Suburban 1979
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC K1500 1981
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC K1500 1982
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC K2500 1980
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Jeep Comanche 1991
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep Comanche 1992
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep Wrangler 1991
  • 2.5L L4 150CID
  • 4L L6 242CID
  • Cutting and Welding Required During Installation
Jeep Wrangler 1992
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Mercury Capri 1983
  • 5L V8 302CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mercury Capri 1984
  • 5L V8 302CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mercury Capri 1985
  • 5L V8 302CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Plymouth Voyager 1994
  • FWD
  • 3.3L V6 3301CC/201CID
  • Cutting and Welding Required During Installation
Pontiac Trans Sport 1990
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation