100% BASÉ AU CANADA 100% CANADIEN
SANS FRAIS DE COURTAGE EN DOUANE SANS FRAIS DE DOUANE
MARCHAND AUTORISÉ MARCHAND AUTORISÉ
30 JOURS – RETOURS SANS TRACAS 30 JOURS – RETOURS

MagnaFlowStainless Federal Catalytic Converter without Sensor Ports (2.5" IN\/2.5" OUT)

DISTRIBUTEUR AUTORISÉ

94016

Numéro de Pièce du Fabricant
*Les images sont à titre illustratif seulement. Le produit réel peut varier.
SKU: MAG-94016
Sélectionnez un véhicule pour vérifier la compatibilité.

Sélectionnez un Véhicule

Cela servira à vous montrer les pièces compatibles.

Auto Parts Finder

Ce produit n'est pas compatible avec votre sélection!

Le produit affiché sur cette page n'est pas compatible avec vehicle

!
Afin d'assurer la bonne compatibilité des pièces, veuillez parcourir des produits compatibles ou changer votre sélection.


Changer la Sélection Actuelle
Livraison GRATUITE*
Garantie Standard

Commande Spéciale
1-3 Semaines
173,00 CA $
Stainless Federal Catalytic Converter without Sensor Ports (2.5" IN\/2.5" OUT) doit être acheté par multiple de 1
DISTRIBUTEUR AUTORISÉ

94016

Numéro de Pièce du Fabricant
Plus d’information
Fabricant MagnaFlow
Numéro de Pièce du Fabricant 94016
Prix de Détail Suggéré du Fabricant (MSRP) 117,07
Rédigez votre propre commentaire
Seuls les utilisateurs sauvegardés peuvent soumettre leur avis. Veuillez vous connecter ou créer un compte
This table represents all the 341 compatible vehicles for this part:
Marque Modèle Année
Application Notes
Position Submodel Transmission Drive Type Engine Aspiration Additional Information
Buick Century 1980
  • 5L V8 305CID
  • 4.3L V8 265CID
  • Cutting and Welding Required During Installation
Buick Century 1981
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
  • CAN
Buick Electra 1984
  • 4.1L V6 252CID
  • Cutting and Welding Required During Installation
Buick LeSabre 1982
  • 4.4L V8 267CID
  • Cutting and Welding Required During Installation
  • CAN
Buick LeSabre 1983
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick LeSabre 1984
  • 3.8L V6 3800CC/231CID
  • 4.1L V6 252CID
  • Cutting and Welding Required During Installation
Buick LeSabre 1985
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick LeSabre 1992
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick LeSabre 1993
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick LeSabre 1994
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick Park Avenue 1991
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick Park Avenue 1992
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick Park Avenue 1993
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick Park Avenue 1994
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick Reatta 1991
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick Regal 1980
  • 5L V8 305CID
  • 4.3L V8 265CID
  • Cutting and Welding Required During Installation
Buick Regal 1981
  • 3.8L V6 3800CC/231CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Buick Regal 1982
  • 3.8L V6 3800CC/231CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Buick Regal 1983
  • 3.8L V6 3800CC/231CID
  • Naturally Aspirated
  • Turbocharged
  • Cutting and Welding Required During Installation
Buick Regal 1984
  • 3.8L V6 3800CC/231CID
  • 4.1L V6 252CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Buick Regal 1985
  • 3.8L V6 3800CC/231CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Buick Regal 1986
  • 3.8L V6 3800CC/231CID
  • 5L V8 307CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
  • Y
Buick Regal 1987
  • 3.8L V6 3800CC/231CID
  • 5L V8 307CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
  • Y
Buick Riviera 1981
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick Riviera 1982
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick Riviera 1983
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick Riviera 1984
  • 3.8L V6 3800CC/231CID
  • 4.1L V6 252CID
  • Cutting and Welding Required During Installation
Buick Riviera 1991
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick Riviera 1992
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick Riviera 1993
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Cadillac Allante 1987
  • 4.1L V8 250CID
  • Cutting and Welding Required During Installation
Cadillac Allante 1988
  • 4.1L V8 250CID
  • Cutting and Welding Required During Installation
Cadillac Allante 1989
  • 4.5L V8 273CID
  • Cutting and Welding Required During Installation
Cadillac Allante 1990
  • 4.5L V8 273CID
  • Cutting and Welding Required During Installation
Cadillac Allante 1991
  • 4.5L V8 273CID
  • Cutting and Welding Required During Installation
Cadillac Allante 1992
  • 4.5L V8 273CID
  • Cutting and Welding Required During Installation
Cadillac Brougham 1990
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Cadillac Brougham 1991
  • 5L V8 305CID
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Cadillac Brougham 1992
  • 5L V8 305CID
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Cadillac Commercial Chassis 1986
  • 4.1L V8 250CID
  • Cutting and Welding Required During Installation
Cadillac Commercial Chassis 1987
  • 4.1L V8 250CID
  • Cutting and Welding Required During Installation
Cadillac Commercial Chassis 1988
  • 4.5L V8 273CID
  • Cutting and Welding Required During Installation
Cadillac Commercial Chassis 1989
  • 4.5L V8 273CID
  • Cutting and Welding Required During Installation
Cadillac Commercial Chassis 1990
  • 4.5L V8 273CID
  • Cutting and Welding Required During Installation
Cadillac Commercial Chassis 1991
  • 4.9L V8 300CID
  • Cutting and Welding Required During Installation
Cadillac Commercial Chassis 1992
  • 5.7L V8 350CID
  • 4.9L V8 300CID
  • Cutting and Welding Required During Installation
Cadillac DeVille 1986
  • 4.1L V8 250CID
  • Cutting and Welding Required During Installation
Cadillac DeVille 1987
  • 4.1L V8 250CID
  • Cutting and Welding Required During Installation
Cadillac DeVille 1988
  • 4.5L V8 273CID
  • Cutting and Welding Required During Installation
Cadillac DeVille 1989
  • 4.5L V8 273CID
  • Cutting and Welding Required During Installation
Cadillac DeVille 1990
  • 4.5L V8 273CID
  • Cutting and Welding Required During Installation
Cadillac DeVille 1991
  • 4.9L V8 300CID
  • Cutting and Welding Required During Installation
Cadillac DeVille 1992
  • 4.9L V8 300CID
  • Cutting and Welding Required During Installation
Cadillac DeVille 1993
  • 4.9L V8 300CID
  • Cutting and Welding Required During Installation
Cadillac Eldorado 1986
  • 4.1L V8 250CID
  • Cutting and Welding Required During Installation
Cadillac Eldorado 1987
  • 4.1L V8 250CID
  • Cutting and Welding Required During Installation
Cadillac Eldorado 1988
  • 4.5L V8 273CID
  • Cutting and Welding Required During Installation
Cadillac Eldorado 1989
  • 4.5L V8 273CID
  • Cutting and Welding Required During Installation
Cadillac Eldorado 1990
  • 4.5L V8 273CID
  • Cutting and Welding Required During Installation
Cadillac Fleetwood 1980
  • 4.1L V6 252CID
  • Cutting and Welding Required During Installation
Cadillac Fleetwood 1986
  • 4.1L V8 250CID
  • Cutting and Welding Required During Installation
Cadillac Fleetwood 1987
  • 4.1L V8 250CID
  • Cutting and Welding Required During Installation
Cadillac Fleetwood 1988
  • 4.5L V8 273CID
  • Cutting and Welding Required During Installation
Cadillac Fleetwood 1989
  • 4.5L V8 273CID
  • Cutting and Welding Required During Installation
Cadillac Fleetwood 1990
  • 4.5L V8 273CID
  • Cutting and Welding Required During Installation
Cadillac Fleetwood 1991
  • 4.9L V8 300CID
  • Cutting and Welding Required During Installation
Cadillac Fleetwood 1992
  • 4.9L V8 300CID
  • Cutting and Welding Required During Installation
Cadillac Seville 1988
  • 4.5L V8 273CID
  • Cutting and Welding Required During Installation
Cadillac Seville 1989
  • 4.5L V8 273CID
  • Cutting and Welding Required During Installation
Cadillac Seville 1990
  • 4.5L V8 273CID
  • Cutting and Welding Required During Installation
Checker Marathon 1981
  • 5L V8 305CID
  • 3.8L V6 229CID
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Checker Marathon 1982
  • 3.8L V6 229CID
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet Camaro 1980
  • Z28
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
Chevrolet Camaro 1981
  • Z28
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
Chevrolet Camaro 1982
  • 5L V8 305CID
  • 7
  • Cutting and Welding Required During Installation
Chevrolet Camaro 1983
  • 5L V8 305CID
  • H
  • Cutting and Welding Required During Installation
  • S
  • 7
  • Air Tube
Chevrolet Camaro 1984
  • 5L V8 305CID
  • H
  • Cutting and Welding Required During Installation
Chevrolet Camaro 1985
  • 5L V8 305CID
  • H
  • Cutting and Welding Required During Installation
Chevrolet Camaro 1986
  • 5L V8 305CID
  • H
  • Cutting and Welding Required During Installation
Chevrolet Camaro 1987
  • 5L V8 305CID
  • H
  • Cutting and Welding Required During Installation
Chevrolet Camaro 1989
  • 5L V8 305CID
  • E
  • Cutting and Welding Required During Installation
Chevrolet Camaro 1990
  • 5L V8 305CID
  • E
  • Cutting and Welding Required During Installation
  • F
  • Single Converter
Chevrolet Camaro 1991
  • 5L V8 305CID
  • E
  • Cutting and Welding Required During Installation
  • F
  • Single Converter
Chevrolet Camaro 1992
  • 5L V8 305CID
  • E
  • Cutting and Welding Required During Installation
  • F
  • Single Converter
Chevrolet Caprice 1983
  • 5L V8 305CID
  • 3.8L V6 229CID
  • Cutting and Welding Required During Installation
  • 9
Chevrolet Caprice 1984
  • 5L V8 305CID
  • 3.8L V6 229CID
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
  • 9
  • A
Chevrolet Caprice 1985
  • 5.7L V8 350CID
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
Chevrolet Caprice 1986
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet Caprice 1987
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet Caprice 1988
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet Caprice 1989
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 5L V8 307CID
  • Cutting and Welding Required During Installation
Chevrolet Caprice 1990
  • 5.7L V8 350CID
  • 5L V8 305CID
  • 5L V8 307CID
  • Cutting and Welding Required During Installation
Chevrolet Caprice 1991
  • 5L V8 305CID
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
  • Excluding Police Package
Chevrolet Caprice 1992
  • 5L V8 305CID
  • 5.7L V8 350CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
  • Excluding Police Package
Chevrolet Caprice 1993
  • 5L V8 305CID
  • 5.7L V8 350CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
  • Excluding Police Package
Chevrolet El Camino 1984
  • 3.8L V6 3800CC/231CID
  • A
  • Cutting and Welding Required During Installation
Chevrolet Impala 1983
  • 5.7L V8 350CID
  • 3.8L V6 229CID
  • GAS
  • Cutting and Welding Required During Installation
  • 9
Chevrolet Impala 1984
  • 5.7L V8 350CID
  • 3.8L V6 229CID
  • 3.8L V6 3800CC/231CID
  • GAS
  • Cutting and Welding Required During Installation
  • 9
  • A
Chevrolet Impala 1985
  • 5.7L V8 350CID
  • 5L V8 305CID
  • GAS
  • Cutting and Welding Required During Installation
Chevrolet Malibu 1983
  • 5L V8 305CID
  • 3.8L V6 229CID
  • Cutting and Welding Required During Installation
  • 9
Chevrolet Monte Carlo 1981
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Chevrolet Monte Carlo 1983
  • SS
  • 5L V8 305CID
  • 7
  • Air Tube
  • Cutting and Welding Required During Installation
Chevrolet Monte Carlo 1984
  • 3.8L V6 229CID
  • 3.8L V6 3800CC/231CID
  • 9
  • Cutting and Welding Required During Installation
  • A
Chevrolet Monte Carlo 1986
  • 5L V8 305CID
  • H
  • Cutting and Welding Required During Installation
Chevrolet Monte Carlo 1987
  • 5L V8 305CID
  • H
  • Cutting and Welding Required During Installation
Chevrolet Monte Carlo 1988
  • 5L V8 305CID
  • H
  • Cutting and Welding Required During Installation
Dodge B150 1988
  • 3.9L V6 3906CC/239CID
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Dodge B150 1989
  • 3.9L V6 3906CC/239CID
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Dodge B150 1990
  • 3.9L V6 3906CC/239CID
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Dodge B150 1991
  • 3.9L V6 3906CC/239CID
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Dodge B250 1984
  • Rear
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge B250 1985
  • Rear
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge B250 1986
  • Rear
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge B250 1987
  • Rear
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge B250 1988
  • 3.9L V6 3906CC/239CID
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge B250 1989
  • 3.9L V6 3906CC/239CID
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge B250 1990
  • 3.9L V6 3906CC/239CID
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge B250 1991
  • 3.9L V6 3906CC/239CID
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge B250 1992
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge B250 1993
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge B350 1988
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge B350 1989
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge B350 1990
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge B350 1991
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge D150 1982
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge D150 1983
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Dodge D150 1984
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge D150 1985
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge D150 1986
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge D150 1987
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge D250 1982
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge D250 1983
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Dodge D250 1984
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge D350 1982
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge D350 1983
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge D350 1984
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge D350 1985
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge D350 1986
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge D350 1987
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge Dakota 1990
  • 3.9L V6 3906CC/239CID
  • Cutting and Welding Required During Installation
Dodge Dakota 1991
  • 3.9L V6 3906CC/239CID
  • Cutting and Welding Required During Installation
Dodge Ramcharger 1989
  • 4WD
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge Ramcharger 1990
  • 4WD
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge Ramcharger 1991
  • 4WD
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Ford Bronco 1984
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford Bronco 1985
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford Bronco 1986
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford Bronco 1987
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford Bronco 1988
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford Bronco 1989
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford Bronco 1990
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford Bronco 1991
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford Bronco 1992
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford Bronco 1993
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford Bronco 1994
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford Bronco 1995
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford E-100 Econoline 1983
  • Rear
  • 5L V8 302CID
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Ford E-100 Econoline Club Wagon 1983
  • Rear
  • 5L V8 302CID
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Ford E-150 Econoline 1983
  • Rear
  • 5L V8 302CID
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Ford E-150 Econoline 1984
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
  • G
  • 2BBL
  • H
  • 4BBL
Ford E-150 Econoline 1985
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
  • G
  • 2BBL
  • H
  • 4BBL
Ford E-150 Econoline 1986
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline 1987
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline 1988
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline 1989
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline 1990
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline 1991
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline 1992
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline 1993
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline 1994
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline 1995
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline Club Wagon 1983
  • Rear
  • 5L V8 302CID
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Ford E-150 Econoline Club Wagon 1984
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
  • G
  • 2BBL
  • H
  • 4BBL
Ford E-150 Econoline Club Wagon 1985
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
  • G
  • 2BBL
  • H
  • 4BBL
Ford E-150 Econoline Club Wagon 1986
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline Club Wagon 1987
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline Club Wagon 1988
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline Club Wagon 1989
  • Rear
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline Club Wagon 1990
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline Club Wagon 1991
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline Club Wagon 1992
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline Club Wagon 1993
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline Club Wagon 1994
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline Club Wagon 1995
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-250 Econoline 1983
  • Rear
  • 5L V8 302CID
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Ford E-250 Econoline 1984
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
  • G
  • 2BBL
  • H
  • 4BBL
Ford E-250 Econoline 1985
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
  • G
  • 2BBL
  • H
  • 4BBL
Ford E-250 Econoline 1986
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-250 Econoline 1987
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-250 Econoline 1988
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
  • To 8,500lbs. Gross Vehicle Weight
Ford E-250 Econoline 1989
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
  • To 8,500lbs. Gross Vehicle Weight
Ford E-250 Econoline 1990
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
  • To 8,500lbs. Gross Vehicle Weight
Ford E-250 Econoline 1991
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
  • To 8,500lbs. Gross Vehicle Weight
Ford E-250 Econoline 1992
  • Rear
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • To 8,500lbs. Gross Vehicle Weight
  • Cutting and Welding Required During Installation
Ford E-250 Econoline 1993
  • Rear
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • To 8,500lbs. Gross Vehicle Weight
  • Cutting and Welding Required During Installation
Ford E-250 Econoline 1994
  • Rear
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • To 8,500lbs. Gross Vehicle Weight
  • Cutting and Welding Required During Installation
Ford E-250 Econoline 1995
  • Rear
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • To 8,500lbs. Gross Vehicle Weight
  • Cutting and Welding Required During Installation
Ford E-250 Econoline Club Wagon 1984
  • Rear
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • G
  • 2BBL
  • Cutting and Welding Required During Installation
Ford E-250 Econoline Club Wagon 1985
  • Rear
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • G
  • 2BBL
  • Cutting and Welding Required During Installation
  • H
  • 4BBL
Ford E-250 Econoline Club Wagon 1986
  • Rear
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-250 Econoline Club Wagon 1987
  • Rear
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-250 Econoline Club Wagon 1988
  • Rear
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • To 8,500lbs. Gross Vehicle Weight
  • Cutting and Welding Required During Installation
Ford E-250 Econoline Club Wagon 1989
  • Rear
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • To 8,500lbs. Gross Vehicle Weight
  • Cutting and Welding Required During Installation
Ford E-250 Econoline Club Wagon 1990
  • Rear
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • To 8,500lbs. Gross Vehicle Weight
  • Cutting and Welding Required During Installation
Ford E-250 Econoline Club Wagon 1991
  • Rear
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • To 8,500lbs. Gross Vehicle Weight
  • Cutting and Welding Required During Installation
Ford E-350 Econoline 1984
  • Rear
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • G
  • 2BBL
  • Cutting and Welding Required During Installation
Ford E-350 Econoline 1985
  • Rear
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • G
  • 2BBL
  • Cutting and Welding Required During Installation
  • H
  • 4BBL
Ford E-350 Econoline 1986
  • Rear
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-350 Econoline 1987
  • Rear
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-350 Econoline 1988
  • Rear
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-350 Econoline 1989
  • Rear
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-350 Econoline 1990
  • Rear
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-350 Econoline 1991
  • Rear
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-350 Econoline 1992
  • Rear
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-350 Econoline 1993
  • Rear
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-350 Econoline 1994
  • Rear
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-350 Econoline 1995
  • Rear
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-350 Econoline Club Wagon 1984
  • Rear
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • G
  • 2BBL
  • Cutting and Welding Required During Installation
Ford E-350 Econoline Club Wagon 1985
  • Rear
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • G
  • 2BBL
  • Cutting and Welding Required During Installation
  • H
  • 4BBL
Ford E-350 Econoline Club Wagon 1986
  • Rear
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-350 Econoline Club Wagon 1987
  • Rear
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-350 Econoline Club Wagon 1988
  • Rear
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-350 Econoline Club Wagon 1989
  • Rear
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-350 Econoline Club Wagon 1990
  • Rear
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-350 Econoline Club Wagon 1991
  • Rear
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-350 Econoline Club Wagon 1992
  • Rear
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-350 Econoline Club Wagon 1993
  • Rear
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-350 Econoline Club Wagon 1994
  • Rear
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-350 Econoline Club Wagon 1995
  • Rear
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford F-150 1982
  • Rear
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford F-150 1983
  • Rear
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford F-150 1984
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • F
  • 2BBL
  • Cutting and Welding Required During Installation
  • G
  • H
  • 4BBL
Ford F-150 1985
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • F
  • 2BBL
  • Cutting and Welding Required During Installation
  • N
  • FI
  • G
  • H
  • 4BBL
Ford F-150 1986
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • N
  • FI
  • Cutting and Welding Required During Installation
  • H
  • 4BBL
Ford F-150 1987
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
  • H
  • 4BBL
Ford F-150 1988
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford F-150 1989
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford F-150 1990
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford F-150 1991
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford F-150 1992
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford F-150 1993
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford F-150 1994
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
  • H
Ford F-150 1995
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
  • H
Ford F-250 1982
  • Rear
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford F-250 1983
  • Rear
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford F-250 1984
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • F
  • CARB
  • Cutting and Welding Required During Installation
  • G
  • 2BBL
  • H
  • 4BBL
Ford F-250 1985
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • F
  • CARB
  • Cutting and Welding Required During Installation
  • N
  • FI
  • G
  • 2BBL
  • H
  • 4BBL
Ford F-250 1986
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • N
  • FI
  • Cutting and Welding Required During Installation
  • H
  • 4BBL
Ford F-250 1987
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
  • To 8,500lbs. Gross Vehicle Weight
Ford F-250 1988
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
  • To 8,500lbs. Gross Vehicle Weight
Ford F-250 1989
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
  • To 8,500lbs. Gross Vehicle Weight
Ford F-250 1990
  • Rear
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • To 8,500lbs. Gross Vehicle Weight
  • Cutting and Welding Required During Installation
Ford F-250 1991
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
  • To 8,500lbs. Gross Vehicle Weight
Ford F-250 1992
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
  • To 8,500lbs. Gross Vehicle Weight
Ford F-250 1993
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
  • To 8,500lbs. Gross Vehicle Weight
Ford F-250 1994
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
  • To 8,500lbs. Gross Vehicle Weight
Ford F-250 1995
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
  • To 8,500lbs. Gross Vehicle Weight
Ford F-350 1984
  • Rear
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • G
  • 2BBL
  • Cutting and Welding Required During Installation
  • H
  • 4BBL
Ford F-350 1985
  • Rear
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • G
  • 2BBL
  • Cutting and Welding Required During Installation
  • H
  • 4BBL
Ford F-350 1986
  • Rear
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • H
  • 4BBL
  • Cutting and Welding Required During Installation
Ford F-350 1987
  • Rear
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • H
  • 4BBL
  • Cutting and Welding Required During Installation
Ford F-350 1988
  • Rear
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford F-350 1989
  • Rear
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford F-350 1990
  • Rear
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
  • CAN
Ford F-350 1991
  • Rear
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
  • CAN
Ford F-350 1992
  • Rear
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford F-350 1993
  • Rear
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford F-350 1994
  • Rear
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford F-350 1995
  • Rear
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford Mustang 1983
  • Rear
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Ford Mustang 1984
  • Rear
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Ford Mustang 1985
  • Rear
  • Automatic
  • Standard
  • 5L V8 302CID
  • Single Exhaust
  • Cutting and Welding Required During Installation
  • Dual Exhaust
GMC Caballero 1984
  • 3.8L V6 3800CC/231CID
  • A
  • Cutting and Welding Required During Installation
Jeep Grand Wagoneer 1984
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Jeep Grand Wagoneer 1985
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Jeep Grand Wagoneer 1986
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Jeep Grand Wagoneer 1987
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Jeep Grand Wagoneer 1988
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Jeep Grand Wagoneer 1989
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Jeep Grand Wagoneer 1990
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Jeep Grand Wagoneer 1991
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Mercury Capri 1983
  • Rear
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Mercury Capri 1984
  • Rear
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Mercury Capri 1985
  • Rear
  • Automatic
  • 5L V8 302CID
  • Single Exhaust
  • Cutting and Welding Required During Installation
  • Dual Exhaust
Oldsmobile 88 1992
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Oldsmobile 88 1993
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Oldsmobile 88 1994
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Oldsmobile 88 1995
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Oldsmobile 98 1991
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Oldsmobile 98 1992
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Oldsmobile 98 1993
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Oldsmobile 98 1994
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Oldsmobile 98 1995
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Oldsmobile Custom Cruiser 1991
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
Oldsmobile Custom Cruiser 1992
  • 5L V8 305CID
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass 1980
  • 5L V8 305CID
  • 3.8L V6 3800CC/231CID
  • Air Tube
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Calais 1980
  • 5L V8 305CID
  • 3.8L V6 3800CC/231CID
  • Air Tube
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Calais 1982
  • 4.4L V8 267CID
  • Cutting and Welding Required During Installation
  • CAN
Oldsmobile Cutlass Calais 1984
  • 3.8L V6 3800CC/231CID
  • 5L V8 307CID
  • Cutting and Welding Required During Installation
  • Y
  • 9
Oldsmobile Cutlass Salon 1980
  • 5L V8 305CID
  • 3.8L V6 3800CC/231CID
  • Air Tube
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Salon 1985
  • 3.8L V6 3800CC/231CID
  • 5L V8 307CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Salon 1986
  • 3.8L V6 3800CC/231CID
  • 5L V8 307CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Salon 1987
  • 3.8L V6 3800CC/231CID
  • 5L V8 307CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Supreme 1980
  • 5L V8 305CID
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
  • Air Tube
Oldsmobile Cutlass Supreme 1982
  • 4.4L V8 267CID
  • Cutting and Welding Required During Installation
  • CAN
Oldsmobile Cutlass Supreme 1984
  • 3.8L V6 3800CC/231CID
  • 5L V8 307CID
  • Cutting and Welding Required During Installation
  • Y
  • 9
Oldsmobile Cutlass Supreme 1985
  • 3.8L V6 3800CC/231CID
  • 5L V8 307CID
  • Cutting and Welding Required During Installation
  • Y
Oldsmobile Cutlass Supreme 1986
  • 3.8L V6 3800CC/231CID
  • 5L V8 307CID
  • Cutting and Welding Required During Installation
  • Y
Oldsmobile Cutlass Supreme 1987
  • 3.8L V6 3800CC/231CID
  • 5L V8 307CID
  • Cutting and Welding Required During Installation
  • Y
  • 9
Oldsmobile Cutlass Supreme 1988
  • 5L V8 307CID
  • Cutting and Welding Required During Installation
Oldsmobile Delta 88 1984
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Oldsmobile Delta 88 1985
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Oldsmobile Toronado 1984
  • 4.1L V6 252CID
  • Cutting and Welding Required During Installation
Pontiac Bonneville 1984
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Pontiac Bonneville 1985
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Pontiac Bonneville 1986
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Pontiac Bonneville 1992
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Pontiac Bonneville 1993
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Pontiac Bonneville 1994
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Pontiac Firebird 1980
  • Trans Am
  • 5L V8 305CID
  • 3.8L V6 3800CC/231CID
  • 4.9L V8 301CID
  • Cutting and Welding Required During Installation
Pontiac Firebird 1981
  • 5L V8 305CID
  • 4.9L V8 301CID
  • Cutting and Welding Required During Installation
Pontiac Firebird 1982
  • 5L V8 305CID
  • TBI
  • Cutting and Welding Required During Installation
Pontiac Firebird 1983
  • 5L V8 305CID
  • H
  • Cutting and Welding Required During Installation
Pontiac Firebird 1984
  • 5L V8 305CID
  • H
  • Cutting and Welding Required During Installation
Pontiac Firebird 1985
  • 5L V8 305CID
  • H
  • Cutting and Welding Required During Installation
Pontiac Firebird 1986
  • 5L V8 305CID
  • H
  • Cutting and Welding Required During Installation
Pontiac Firebird 1987
  • 5L V8 305CID
  • H
  • Cutting and Welding Required During Installation
Pontiac Firebird 1988
  • 5L V8 305CID
  • E
  • Single Converter
  • Cutting and Welding Required During Installation
Pontiac Firebird 1989
  • 5L V8 305CID
  • E
  • Single Converter
  • Cutting and Welding Required During Installation
Pontiac Firebird 1990
  • 5L V8 305CID
  • E
  • Single Converter
  • Cutting and Welding Required During Installation
  • F
Pontiac Firebird 1991
  • 5L V8 305CID
  • E
  • Single Converter
  • Cutting and Welding Required During Installation
  • F
Pontiac Firebird 1992
  • 5L V8 305CID
  • E
  • Single Converter
  • Cutting and Welding Required During Installation
  • F
Pontiac Grand Prix 1983
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Pontiac Grand Prix 1984
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Pontiac Grand Prix 1985
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Pontiac Grand Prix 1986
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Pontiac Grand Prix 1987
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Pontiac Parisienne 1983
  • 5L V8 305CID
  • Cutting and Welding Required During Installation
Pontiac Parisienne 1984
  • 5L V8 305CID
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Pontiac Parisienne 1985
  • 5L V8 305CID
  • 3.8L V6 231CID
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
  • CAN
Pontiac Parisienne 1986
  • 5L V8 305CID
  • H
  • Cutting and Welding Required During Installation