100% BASÉ AU CANADA 100% CANADIEN
SANS FRAIS DE COURTAGE EN DOUANE SANS FRAIS DE DOUANE
MARCHAND AUTORISÉ MARCHAND AUTORISÉ
30 JOURS – RETOURS SANS TRACAS 30 JOURS – RETOURS

MagnaFlowStainless Federal Catalytic Converter without Sensor Port (2.25" IN\/2.25" OUT)

DISTRIBUTEUR AUTORISÉ

53005

Numéro de Pièce du Fabricant
*Les images sont à titre illustratif seulement. Le produit réel peut varier.
SKU: MAG-53005
Sélectionnez un véhicule pour vérifier la compatibilité.

Sélectionnez un Véhicule

Cela servira à vous montrer les pièces compatibles.

Auto Parts Finder

Ce produit n'est pas compatible avec votre sélection!

Le produit affiché sur cette page n'est pas compatible avec vehicle

!
Afin d'assurer la bonne compatibilité des pièces, veuillez parcourir des produits compatibles ou changer votre sélection.


Changer la Sélection Actuelle
Livraison GRATUITE*
Garantie Standard

Commande Spéciale
1-3 Semaines
133,00 CA $
Stainless Federal Catalytic Converter without Sensor Port (2.25" IN\/2.25" OUT) doit être acheté par multiple de 1
DISTRIBUTEUR AUTORISÉ

53005

Numéro de Pièce du Fabricant
Plus d’information
Fabricant MagnaFlow
Numéro de Pièce du Fabricant 53005
Prix de Détail Suggéré du Fabricant (MSRP) 103,93
Rédigez votre propre commentaire
Seuls les utilisateurs sauvegardés peuvent soumettre leur avis. Veuillez vous connecter ou créer un compte
This table represents all the 185 compatible vehicles for this part:
Marque Modèle Année
Application Notes
Position Submodel Body Type Drive Type Engine Aspiration Additional Information
Acura Legend 1991
  • 3.2L V6 3206CC
  • Cutting and Welding Required During Installation
Acura Legend 1992
  • 3.2L V6 3206CC
  • Cutting and Welding Required During Installation
Acura Legend 1993
  • Rear
  • 3.2L V6 3206CC
  • Cutting and Welding Required During Installation
Acura Legend 1994
  • Rear
  • GS
  • L
  • LS
  • 3.2L V6 3206CC
  • Cutting and Welding Required During Installation
Acura Legend 1995
  • Rear
  • GS
  • L
  • LS
  • SE
  • 3.2L V6 3206CC
  • Cutting and Welding Required During Installation
Audi 100 Quattro 1989
  • 2.3L L5 2309CC
  • Cutting and Welding Required During Installation
Audi 100 Quattro 1990
  • 2.3L L5 2309CC
  • Cutting and Welding Required During Installation
Audi 100 Quattro 1991
  • 2.3L L5 2309CC
  • Cutting and Welding Required During Installation
Audi 200 Quattro 1989
  • 2.2L L5 2226CC
  • Cutting and Welding Required During Installation
Audi 200 Quattro 1990
  • 2.2L L5 2226CC
  • Cutting and Welding Required During Installation
Audi 200 Quattro 1991
  • 2.2L L5 2226CC
  • Cutting and Welding Required During Installation
Audi Coupe Quattro 1990
  • 2.3L L5 2309CC
  • Cutting and Welding Required During Installation
Audi Coupe Quattro 1991
  • 2.3L L5 2309CC
  • Cutting and Welding Required During Installation
Audi V8 Quattro 1990
  • Left
  • Right
  • 3.6L V8 3562CC
  • Cutting and Welding Required During Installation
Audi V8 Quattro 1991
  • Left
  • Right
  • 3.6L V8 3562CC
  • Cutting and Welding Required During Installation
Bentley Corniche 1979
  • Left
  • Right
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Bentley Corniche 1980
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Bentley Mulsanne 1981
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Bentley T2 Series 1979
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Bentley T2 Series 1980
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Chevrolet Corvette 1986
  • Front Left
  • Front Right
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet Corvette 1987
  • Front Left
  • Front Right
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet Corvette 1988
  • Front Left
  • Front Right
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet Corvette 1989
  • Front Left
  • Front Right
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet Corvette 1990
  • Front Left
  • Front Right
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet Corvette 1991
  • Front Left
  • Front Right
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Ford Bronco II 1990
  • Front
  • Rear
  • 2.9L V6 177CID
  • Cutting and Welding Required During Installation
Ford Gran Torino 1975
  • Right
  • Left
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford Gran Torino 1976
  • Right
  • Left
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford LTD 1975
  • Right
  • Left
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford LTD 1976
  • Right
  • Left
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford LTD 1977
  • Left
  • Right
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford LTD 1978
  • Right
  • Left
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford LTD II 1977
  • Left
  • Right
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford LTD II 1978
  • Right
  • Left
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford LTD II 1979
  • Right
  • Left
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford Thunderbird 1989
  • Left
  • Right
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Ford Thunderbird 1990
  • Left
  • Right
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Ford Thunderbird 1991
  • Left
  • Right
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Ford Thunderbird 1992
  • Left
  • Base
  • Super Coupe
  • LX
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Ford Thunderbird 1993
  • Left
  • Super Coupe
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Ford Thunderbird 1994
  • Left
  • Super Coupe
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Ford Thunderbird 1995
  • Left
  • Super Coupe
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Ford Torino 1975
  • Right
  • Left
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford Torino 1976
  • Left
  • Right
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Honda Passport 1994
  • Front
  • 2.6L L4 2559CC
  • Cutting and Welding Required During Installation
Honda Passport 1995
  • Front
  • 2.6L L4 2559CC
  • Cutting and Welding Required During Installation
Infiniti J30 1993
  • Left
  • Right
  • 3L V6 2960CC/181CID
  • Cutting and Welding Required During Installation
Infiniti J30 1994
  • Left
  • Right
  • 3L V6 2960CC/181CID
  • Cutting and Welding Required During Installation
Infiniti J30 1995
  • Left
  • Right
  • 3L V6 2960CC/181CID
  • Cutting and Welding Required During Installation
Mazda RX-7 1986
  • Center
  • Front
  • 1.3L R2 1308CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Mazda RX-7 1987
  • Center
  • Front
  • 1.3L R2 1308CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Mazda RX-7 1988
  • Center
  • Front
  • 1.3L R2 1308CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Mazda RX-7 1989
  • Center
  • Front
  • 1.3L R2 1308CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Mazda RX-7 1990
  • Center
  • Front
  • 1.3L R2 1308CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Mazda RX-7 1991
  • Center
  • Front
  • 1.3L R2 1308CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Mercedes-Benz 190E 1986
  • Front
  • 2.3L L4 2299CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 190E 1987
  • Front
  • 2.3L L4 2299CC
  • Cutting and Welding Required During Installation
Mercedes-Benz S500 1994
  • Right
  • Left
  • 5L V8 4973CC
  • Cutting and Welding Required During Installation
Mercedes-Benz S500 1995
  • Right
  • Left
  • 5L V8 4973CC
  • Cutting and Welding Required During Installation
Mercury Cougar 1975
  • Left
  • Right
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Mercury Cougar 1976
  • Right
  • Left
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Mercury Cougar 1989
  • Left
  • Right
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Mercury Cougar 1990
  • Left
  • Right
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Mercury Cougar 1991
  • Left
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Mercury Cougar 1992
  • Left
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Mercury Cougar 1993
  • Left
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Mercury Cougar 1994
  • Left
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Mercury Cougar 1995
  • Left
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Mercury Marquis 1978
  • Right
  • Left
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Mercury Montego 1975
  • Right
  • Left
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Mercury Montego 1976
  • Right
  • Left
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Mercury Villager 1994
  • Front
  • 3L V6 182CID
  • Cutting and Welding Required During Installation
Mercury Villager 1995
  • Front
  • 3L V6 182CID
  • Cutting and Welding Required During Installation
Mitsubishi Mirage 1993
  • 1.5L L4 1468CC/90cCID
  • 1.8L L4 1834CC/112CID
  • Cutting and Welding Required During Installation
Mitsubishi Mirage 1994
  • 1.8L L4 1834CC/112CID
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
Mitsubishi Mirage 1995
  • 1.8L L4 1834CC/112CID
  • Cutting and Welding Required During Installation
Nissan 200SX 1995
  • 1.6L L4 1597CC/97cCID
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Nissan 200SX 1996
  • 1.6L L4 1597CC/97cCID
  • Cutting and Welding Required During Installation
Nissan 240SX 1995
  • Rear
  • 2.4L L4 2389CC
  • Cutting and Welding Required During Installation
Nissan D21 1988
  • RWD
  • 2.4L L4 2389CC
  • Cutting and Welding Required During Installation
Nissan D21 1989
  • RWD
  • 2.4L L4 2389CC
  • Cutting and Welding Required During Installation
Nissan NX 1991
  • 1.6L L4 1597CC/97cCID
  • Cutting and Welding Required During Installation
Nissan NX 1992
  • 1.6L L4 1597CC/97cCID
  • Cutting and Welding Required During Installation
Nissan NX 1993
  • 1.6L L4 1597CC/97cCID
  • Cutting and Welding Required During Installation
Nissan Quest 1994
  • Front
  • 3L V6 2960CC/181CID
  • Cutting and Welding Required During Installation
Nissan Quest 1995
  • Front
  • 3L V6 2960CC/181CID
  • Cutting and Welding Required During Installation
Nissan Stanza 1987
  • Sedan
  • 2L L4 1974CC
  • Cutting and Welding Required During Installation
Nissan Stanza 1988
  • Sedan
  • 2L L4 1974CC
  • Cutting and Welding Required During Installation
Nissan Stanza 1989
  • 2L L4 1974CC
  • Cutting and Welding Required During Installation
Peugeot 604 1977
  • Left
  • Right
  • 2.8L V6 2849CC
  • 2.7L L6 2664CC
  • Cutting and Welding Required During Installation
Peugeot 604 1978
  • Left
  • Right
  • 2.8L V6 2849CC
  • 2.7L L6 2664CC
  • Cutting and Welding Required During Installation
Peugeot 604 1979
  • Left
  • Right
  • 2.8L V6 2849CC
  • Cutting and Welding Required During Installation
Peugeot 604 1980
  • Left
  • Right
  • 2.8L V6 2849CC
  • Cutting and Welding Required During Installation
Porsche 968 1992
  • 3L L4 2983CC
  • Cutting and Welding Required During Installation
Porsche 968 1993
  • 3L L4 2983CC
  • Cutting and Welding Required During Installation
Porsche 968 1994
  • 3L L4 2983CC
  • Cutting and Welding Required During Installation
Porsche 968 1995
  • 3L L4 2983CC
  • Cutting and Welding Required During Installation
Rolls Royce Camargue 1979
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls Royce Camargue 1980
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls Royce Camargue 1981
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls Royce Camargue 1982
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls Royce Camargue 1983
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls Royce Camargue 1984
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls Royce Camargue 1985
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls Royce Camargue 1986
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls Royce Camargue 1987
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls Royce Corniche 1979
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls Royce Corniche 1980
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls Royce Corniche 1981
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls Royce Corniche 1982
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls Royce Corniche 1983
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls Royce Corniche 1984
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls Royce Corniche 1985
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls Royce Corniche II 1986
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls Royce Corniche II 1987
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls Royce Corniche II 1988
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls Royce Corniche II 1989
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls Royce Corniche II 1990
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls Royce Silver Spirit 1981
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls Royce Silver Spirit 1982
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls Royce Silver Spirit 1983
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls Royce Silver Spirit 1984
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls Royce Silver Spirit 1985
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls Royce Silver Spirit 1986
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls Royce Silver Spirit 1987
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls Royce Silver Spirit 1988
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls Royce Silver Spirit 1989
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls Royce Silver Spirit 1990
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls Royce Silver Spur 1981
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls Royce Silver Spur 1982
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls Royce Silver Spur 1983
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls Royce Silver Spur 1984
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls Royce Silver Spur 1985
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls Royce Silver Spur 1986
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls Royce Silver Spur 1987
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls Royce Silver Spur 1988
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls Royce Silver Spur 1989
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls Royce Silver Spur 1990
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls Royce Silver Wraith II 1979
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Rolls Royce Silver Wraith II 1980
  • Right
  • Left
  • 6.8L V8 6750CC/412CID
  • Cutting and Welding Required During Installation
Saab 900 1979
  • 2L L4 1985CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Saab 900 1980
  • 2L L4 1985CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Saab 900 1981
  • 2L L4 1985CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Saab 900 1982
  • 2L L4 1985CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Saab 900 1983
  • 2L L4 1985CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Saab 900 1984
  • 2L L4 1985CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Saab 900 1985
  • 2L L4 1985CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Saab 900 1986
  • 2L L4 1985CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Saab 900 1987
  • 2L L4 1985CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Saab 900 1988
  • 2L L4 1985CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Saab 900 1989
  • 2L L4 1985CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Saab 900 1990
  • 2L L4 1985CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Saab 900 1991
  • 2L L4 1985CC
  • 2.1L L4 2119CC
  • Cutting and Welding Required During Installation
Saab 900 1992
  • 2L L4 1985CC
  • 2.1L L4 2119CC
  • Cutting and Welding Required During Installation
Saab 900 1993
  • 2L L4 1985CC
  • 2.1L L4 2119CC
  • Cutting and Welding Required During Installation
Saab 900 1994
  • 2L L4 1985CC
  • 2.5L V6 2498CC
  • 2.3L L4 2290CC/140CID
  • Cutting and Welding Required During Installation
Saab 900 1995
  • 2L L4 1985CC
  • 2.5L V6 2498CC
  • 2.3L L4 2290CC/140CID
  • Cutting and Welding Required During Installation
Sterling 825 1987
  • 2.5L V6 2494CC
  • Cutting and Welding Required During Installation
Sterling 825 1988
  • 2.5L V6 2494CC
  • Cutting and Welding Required During Installation
Sterling 827 1989
  • 2.7L V6 2675CC
  • Cutting and Welding Required During Installation
Sterling 827 1990
  • 2.7L V6 2675CC
  • Cutting and Welding Required During Installation
Sterling 827 1991
  • 2.7L V6 2675CC
  • Cutting and Welding Required During Installation
Toyota Supra 1993
  • Rear
  • 3L L6 2997CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Toyota Supra 1994
  • Rear
  • 3L L6 2997CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Toyota Supra 1995
  • Rear
  • 3L L6 2997CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Toyota Supra 1996
  • Rear
  • 3L L6 2997CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Toyota Supra 1997
  • Rear
  • 3L L6 2997CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Toyota Supra 1998
  • Rear
  • 3L L6 2997CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Volkswagen Cabriolet 1991
  • 1.8L L4 1781CC
  • Cutting and Welding Required During Installation
Volkswagen Cabriolet 1992
  • 1.8L L4 1781CC
  • Cutting and Welding Required During Installation
Volkswagen Cabriolet 1993
  • 1.8L L4 1781CC
  • Cutting and Welding Required During Installation
Volkswagen Golf 1995
  • 2.8L V6
  • Cutting and Welding Required During Installation
Volvo 242 1981
  • 2.1L L4 2127CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Volvo 242 1982
  • 2.1L L4 2127CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Volvo 242 1983
  • 2.1L L4 2127CC
  • Cutting and Welding Required During Installation
Volvo 242 1984
  • 2.1L L4 2127CC
  • Cutting and Welding Required During Installation
Volvo 244 1982
  • 2.1L L4 2127CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Volvo 244 1983
  • 2.1L L4 2127CC
  • Cutting and Welding Required During Installation
Volvo 244 1984
  • 2.1L L4 2127CC
  • Cutting and Welding Required During Installation
Volvo 245 1981
  • 2.1L L4 2127CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Volvo 245 1982
  • 2.1L L4 2127CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Volvo 245 1983
  • 2.1L L4 2127CC
  • Cutting and Welding Required During Installation
Volvo 245 1984
  • 2.1L L4 2127CC
  • Cutting and Welding Required During Installation
Volvo 245 1985
  • 2.1L L4 2127CC
  • Cutting and Welding Required During Installation