100% BASÉ AU CANADA 100% CANADIEN
SANS FRAIS DE COURTAGE EN DOUANE SANS FRAIS DE DOUANE
MARCHAND AUTORISÉ MARCHAND AUTORISÉ
30 JOURS – RETOURS SANS TRACAS 30 JOURS – RETOURS

MagnaFlowStainless Federal Catalytic Converter without Sensor Port (2.25" IN\/2.25" OUT)

DISTRIBUTEUR AUTORISÉ

93515

Numéro de Pièce du Fabricant
*Les images sont à titre illustratif seulement. Le produit réel peut varier.
SKU: MAG-93515
Sélectionnez un véhicule pour vérifier la compatibilité.

Sélectionnez un Véhicule

Cela servira à vous montrer les pièces compatibles.

Auto Parts Finder

Ce produit n'est pas compatible avec votre sélection!

Le produit affiché sur cette page n'est pas compatible avec vehicle

!
Afin d'assurer la bonne compatibilité des pièces, veuillez parcourir des produits compatibles ou changer votre sélection.


Changer la Sélection Actuelle
Livraison GRATUITE*
Garantie Standard

Commande Spéciale
1-3 Semaines
225,00 CA $
Stainless Federal Catalytic Converter without Sensor Port (2.25" IN\/2.25" OUT) doit être acheté par multiple de 1
DISTRIBUTEUR AUTORISÉ

93515

Numéro de Pièce du Fabricant
Plus d’information
Fabricant MagnaFlow
Numéro de Pièce du Fabricant 93515
Prix de Détail Suggéré du Fabricant (MSRP) 166,40
Rédigez votre propre commentaire
Seuls les utilisateurs sauvegardés peuvent soumettre leur avis. Veuillez vous connecter ou créer un compte
This table represents all the 177 compatible vehicles for this part:
Marque Modèle Année
Application Notes
Transmission Engine Aspiration Additional Information
Cadillac Commercial Chassis 1981
  • 6L V8 368CID
  • Air Tube
  • Cutting and Welding Required During Installation
Cadillac Commercial Chassis 1983
  • 6L V8 368CID
  • Air Tube
  • Cutting and Welding Required During Installation
Cadillac Commercial Chassis 1984
  • 6L V8 368CID
  • Air Tube
  • Cutting and Welding Required During Installation
Cadillac DeVille 1981
  • 6L V8 368CID
  • Cutting and Welding Required During Installation
Cadillac Eldorado 1981
  • 6L V8 368CID
  • Air Tube
  • Cutting and Welding Required During Installation
Cadillac Fleetwood 1981
  • 6L V8 368CID
  • Cutting and Welding Required During Installation
Cadillac Fleetwood 1982
  • 6L V8 368CID
  • Cutting and Welding Required During Installation
Cadillac Fleetwood 1983
  • 6L V8 368CID
  • Cutting and Welding Required During Installation
Cadillac Fleetwood 1984
  • 6L V8 368CID
  • Cutting and Welding Required During Installation
Cadillac Seville 1981
  • 6L V8 368CID
  • Cutting and Welding Required During Installation
Chevrolet Camaro 1982
  • Automatic
  • 5L V8 305CID
  • H
  • Cutting and Welding Required During Installation
Chevrolet Caprice 1981
  • 5.7L V8 350CID
  • without Air Tube
  • Cutting and Welding Required During Installation
Chevrolet Caprice 1982
  • 5.7L V8 350CID
  • without Air Tube
  • Cutting and Welding Required During Installation
Chevrolet Caprice 1986
  • 5L V8 307CID
  • Air Tube
  • Cutting and Welding Required During Installation
Chevrolet Caprice 1987
  • 5L V8 307CID
  • Y
  • Air Tube
  • Cutting and Welding Required During Installation
Chevrolet Caprice 1988
  • 5L V8 307CID
  • Y
  • Air Tube
  • Cutting and Welding Required During Installation
Chrysler Cordoba 1979
  • 5.2L V8 5211CC/318CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Chrysler Cordoba 1980
  • 5.2L V8 5211CC/318CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Chrysler Cordoba 1981
  • 5.2L V8 5211CC/318CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Chrysler Cordoba 1982
  • 5.2L V8 5211CC/318CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Chrysler Cordoba 1983
  • 5.2L V8 5211CC/318CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Chrysler Fifth Avenue 1983
  • 5.2L V8 5211CC/318CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Chrysler Fifth Avenue 1984
  • 5.2L V8 5211CC/318CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Chrysler Fifth Avenue 1985
  • 5.2L V8 5211CC/318CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Chrysler Fifth Avenue 1986
  • 5.2L V8 5211CC/318CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Chrysler Fifth Avenue 1987
  • 5.2L V8 5211CC/318CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Chrysler Fifth Avenue 1988
  • 5.2L V8 5211CC/318CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Chrysler Fifth Avenue 1989
  • 5.2L V8 5211CC/318CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Chrysler Imperial 1981
  • 5.2L V8 5211CC/318CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Chrysler Imperial 1982
  • 5.2L V8 5211CC/318CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Chrysler Imperial 1983
  • 5.2L V8 5211CC/318CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Chrysler LeBaron 1980
  • 5.2L V8 5211CC/318CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Chrysler LeBaron 1981
  • 5.2L V8 5211CC/318CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Chrysler Newport 1979
  • 5.2L V8 5211CC/318CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Chrysler Newport 1980
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Chrysler Newport 1981
  • 5.2L V8 5211CC/318CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Chrysler New Yorker 1979
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Chrysler New Yorker 1980
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Chrysler New Yorker 1981
  • 5.2L V8 5211CC/318CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Chrysler New Yorker 1982
  • 5.2L V8 5211CC/318CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Dodge Aspen 1980
  • 5.2L V8 5211CC/318CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Dodge Dakota 1987
  • 3.9L V6 3906CC/239CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Dodge Dakota 1988
  • 3.9L V6 3906CC/239CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Dodge Dakota 1989
  • 3.9L V6 3906CC/239CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Dodge Diplomat 1981
  • 5.2L V8 5211CC/318CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Dodge Diplomat 1982
  • 5.2L V8 5211CC/318CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Dodge Diplomat 1983
  • 5.2L V8 5211CC/318CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Dodge Diplomat 1984
  • 5.2L V8 5211CC/318CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Dodge Diplomat 1985
  • 5.2L V8 5211CC/318CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Dodge Diplomat 1986
  • 5.2L V8 5211CC/318CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Dodge Diplomat 1987
  • 5.2L V8 5211CC/318CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Dodge Diplomat 1988
  • 5.2L V8 5211CC/318CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Dodge Diplomat 1989
  • 5.2L V8 5211CC/318CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Dodge Mirada 1981
  • 5.2L V8 5211CC/318CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Dodge Mirada 1982
  • 5.2L V8 5211CC/318CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Dodge Mirada 1983
  • 5.2L V8 5211CC/318CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Ford E-100 Econoline Club Wagon 1981
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-100 Econoline Club Wagon 1982
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-100 Econoline Club Wagon 1983
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline 1981
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline 1982
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline 1983
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline 1984
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford E-150 Econoline 1985
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford E-150 Econoline 1986
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford E-150 Econoline Club Wagon 1981
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline Club Wagon 1982
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline Club Wagon 1983
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline Club Wagon 1984
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford E-150 Econoline Club Wagon 1985
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford E-150 Econoline Club Wagon 1986
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford E-250 Econoline 1981
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-250 Econoline 1982
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-250 Econoline 1983
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-250 Econoline 1984
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford E-250 Econoline 1985
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford E-250 Econoline 1986
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford E-250 Econoline Club Wagon 1983
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-250 Econoline Club Wagon 1984
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford E-250 Econoline Club Wagon 1985
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford E-250 Econoline Club Wagon 1986
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford E-350 Econoline 1984
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford E-350 Econoline 1985
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford E-350 Econoline 1986
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford E-350 Econoline Club Wagon 1984
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford E-350 Econoline Club Wagon 1985
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford E-350 Econoline Club Wagon 1986
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford F-150 1984
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford F-150 1985
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford F-150 1986
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford F-250 1984
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford F-250 1985
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford F-250 1986
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford F-350 1984
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford F-350 1985
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford F-350 1986
  • 4.9L L6 4917CC/300CID
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford Fairmont 1980
  • 4.2L V8 255CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Ford Fairmont 1981
  • 4.2L V8 255CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Ford Fairmont 1982
  • 4.2L V8 255CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Ford Granada 1981
  • 4.2L V8 255CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Ford Granada 1982
  • 3.8L V6 232CID
  • 2.3L L4 140CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Ford LTD 1984
  • 3.8L V6 232CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Ford Mustang 1980
  • 4.2L V8 255CID
  • 2.3L L4 140CID
  • Naturally Aspirated
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
  • Federal Emissions Equipped
  • Front and Rear
Ford Mustang 1981
  • 4.2L V8 255CID
  • 2.3L L4 140CID
  • Naturally Aspirated
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
  • Federal Emissions Equipped
  • Front and Rear
Ford Mustang 1982
  • 5L V8 302CID
  • 4.2L V8 255CID
  • 2.3L L4 140CID
  • Naturally Aspirated
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
  • Federal Emissions Equipped
  • Front and Rear
Ford Mustang 1983
  • 3.8L V6 232CID
  • Federal Emissions Equipped
  • Front and Rear
  • Cutting and Welding Required During Installation
Ford Mustang 1984
  • 3.8L V6 232CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Ford Mustang 1985
  • 3.8L V6 232CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Ford Mustang 1986
  • 5L V8 302CID
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
  • Main and Pre-Converter
  • Front and Rear
Ford Mustang 1987
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
  • Front and Rear
Ford Mustang 1988
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
  • Front and Rear
Ford Mustang 1989
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
  • Front and Rear
Ford Mustang 1990
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
  • Front and Rear
Ford Mustang 1991
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
  • Front and Rear
Ford Mustang 1992
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
  • Front and Rear
Ford Mustang 1993
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
  • Front and Rear
Ford Mustang 1994
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
  • Front and Rear
Ford Mustang 1995
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
  • Front and Rear
Ford Taurus 1988
  • 3.8L V6 232CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Ford Taurus 1989
  • 3.8L V6 232CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Ford Taurus 1990
  • 3.8L V6 232CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Ford Thunderbird 1980
  • 5L V8 302CID
  • 4.2L V8 255CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Ford Thunderbird 1981
  • 5L V8 302CID
  • 4.2L V8 255CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Ford Thunderbird 1982
  • 4.2L V8 255CID
  • 3.8L V6 232CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Ford Thunderbird 1983
  • 3.8L V6 232CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Ford Thunderbird 1984
  • 3.8L V6 232CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Ford Thunderbird 1985
  • 3.8L V6 232CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Ford Thunderbird 1986
  • 5L V8 302CID
  • 3.8L V6 232CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Ford Thunderbird 1987
  • 5L V8 302CID
  • 3.8L V6 232CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Ford Thunderbird 1988
  • 5L V8 302CID
  • 3.8L V6 232CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Lincoln Continental 1982
  • 5L V8 302CID
  • 3.8L V6 232CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Lincoln Continental 1988
  • 3.8L V6 232CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Lincoln Continental 1989
  • 3.8L V6 232CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Lincoln Continental 1990
  • 3.8L V6 232CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Lincoln Mark VII 1986
  • 5L V8 302CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Lincoln Mark VII 1987
  • 5L V8 302CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Lincoln Mark VII 1988
  • 5L V8 302CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Lincoln Mark VII 1989
  • 5L V8 302CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Lincoln Mark VII 1990
  • 5L V8 302CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Lincoln Mark VII 1991
  • 5L V8 302CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Lincoln Mark VII 1992
  • 5L V8 302CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mercury Capri 1980
  • 4.2L V8 255CID
  • 2.3L L4 140CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
  • Front and Rear
Mercury Capri 1981
  • 4.2L V8 255CID
  • 2.3L L4 140CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
  • Front and Rear
Mercury Capri 1982
  • 5L V8 302CID
  • 4.2L V8 255CID
  • 2.3L L4 140CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
  • Front and Rear
Mercury Capri 1983
  • 3.8L V6 232CID
  • 2.3L L4 140CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
  • Front and Rear
Mercury Capri 1984
  • 3.8L V6 232CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mercury Capri 1985
  • 3.8L V6 232CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mercury Capri 1986
  • 3.8L V6 232CID
  • 5L V8 302CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
  • Front and Rear
Mercury Cougar 1980
  • 5L V8 302CID
  • 4.2L V8 255CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mercury Cougar 1981
  • 5L V8 302CID
  • 4.2L V8 255CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mercury Cougar 1982
  • 3.8L V6 232CID
  • 4.2L V8 255CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mercury Cougar 1983
  • 3.8L V6 232CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mercury Cougar 1984
  • 3.8L V6 232CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mercury Cougar 1985
  • 3.8L V6 232CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mercury Cougar 1986
  • 5L V8 302CID
  • 3.8L V6 232CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mercury Cougar 1987
  • 5L V8 302CID
  • 3.8L V6 232CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mercury Cougar 1988
  • 5L V8 302CID
  • 3.8L V6 232CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mercury Marquis 1984
  • 3.8L V6 232CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mercury Monarch 1980
  • 4.2L V8 255CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mercury Sable 1988
  • 3.8L V6 232CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mercury Sable 1989
  • 3.8L V6 232CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mercury Sable 1990
  • 3.8L V6 232CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mercury Zephyr 1980
  • 4.2L V8 255CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mercury Zephyr 1981
  • 4.2L V8 255CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Mercury Zephyr 1982
  • 4.2L V8 255CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Plymouth Gran Fury 1980
  • 5.2L V8 5211CC/318CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Plymouth Gran Fury 1981
  • 5.2L V8 5211CC/318CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Plymouth Gran Fury 1982
  • 5.2L V8 5211CC/318CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Plymouth Gran Fury 1983
  • 5.2L V8 5211CC/318CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Plymouth Gran Fury 1984
  • 5.2L V8 5211CC/318CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Plymouth Gran Fury 1985
  • 5.2L V8 5211CC/318CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Plymouth Gran Fury 1986
  • 5.2L V8 5211CC/318CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Plymouth Gran Fury 1987
  • 5.2L V8 5211CC/318CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Plymouth Gran Fury 1988
  • 5.2L V8 5211CC/318CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Plymouth Gran Fury 1989
  • 5.2L V8 5211CC/318CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Plymouth Volare 1980
  • 5.2L V8 5211CC/318CID
  • Main and Pre-Converter
  • Cutting and Welding Required During Installation
Volkswagen EuroVan 1994
  • 2.5L L5 2459CC/150CID
  • Cutting and Welding Required During Installation
  • CAN