100% BASÉ AU CANADA 100% CANADIEN
SANS FRAIS DE COURTAGE EN DOUANE SANS FRAIS DE DOUANE
MARCHAND AUTORISÉ MARCHAND AUTORISÉ
30 JOURS – RETOURS SANS TRACAS 30 JOURS – RETOURS

MagnaFlowStainless Federal Catalytic Converter without Sensor Port (2" IN\/2" OUT)

DISTRIBUTEUR AUTORISÉ

50004

Numéro de Pièce du Fabricant
*Les images sont à titre illustratif seulement. Le produit réel peut varier.
SKU: MAG-50004
Sélectionnez un véhicule pour vérifier la compatibilité.

Sélectionnez un Véhicule

Cela servira à vous montrer les pièces compatibles.

Auto Parts Finder

Ce produit n'est pas compatible avec votre sélection!

Le produit affiché sur cette page n'est pas compatible avec vehicle

!
Afin d'assurer la bonne compatibilité des pièces, veuillez parcourir des produits compatibles ou changer votre sélection.


Changer la Sélection Actuelle
Livraison GRATUITE*
Garantie Standard

Commande Spéciale
1-3 Semaines
214,00 CA $
Stainless Federal Catalytic Converter without Sensor Port (2" IN\/2" OUT) doit être acheté par multiple de 1
DISTRIBUTEUR AUTORISÉ

50004

Numéro de Pièce du Fabricant
Plus d’information
Fabricant MagnaFlow
Numéro de Pièce du Fabricant 50004
Prix de Détail Suggéré du Fabricant (MSRP) 117,89
Rédigez votre propre commentaire
Seuls les utilisateurs sauvegardés peuvent soumettre leur avis. Veuillez vous connecter ou créer un compte
This table represents all the 129 compatible vehicles for this part:
Marque Modèle Année
Application Notes
Position Submodel Body Type Engine Aspiration Additional Information
Acura Legend 1993
  • Front Right
  • Front Left
  • L
  • LS
  • Coupe
  • 3.2L V6 3206CC
  • Cutting and Welding Required During Installation
Acura Legend 1994
  • Front Right
  • Front Left
  • GS
  • L
  • LS
  • Coupe
  • 3.2L V6 3206CC
  • Cutting and Welding Required During Installation
Acura Legend 1995
  • Front Right
  • Front Left
  • GS
  • L
  • LS
  • Coupe
  • 3.2L V6 3206CC
  • Cutting and Welding Required During Installation
American Motors Concord 1980
  • Front
  • 2.5L L4 151CID
  • Cutting and Welding Required During Installation
American Motors Concord 1981
  • Front
  • 2.5L L4 151CID
  • Cutting and Welding Required During Installation
American Motors Concord 1982
  • Front
  • 2.5L L4 151CID
  • Cutting and Welding Required During Installation
American Motors Gremlin 1978
  • Front
  • 2L L4 121CID
  • Cutting and Welding Required During Installation
American Motors Spirit 1981
  • Front
  • 2.5L L4 151CID
  • Cutting and Welding Required During Installation
American Motors Spirit 1982
  • Front
  • 2.5L L4 151CID
  • Cutting and Welding Required During Installation
Chrysler Intrepid 1993
  • Front Left
  • Front Right
  • 3.5L V6 3497CC/215CID
  • Cutting and Welding Required During Installation
  • CAN
Chrysler Intrepid 1994
  • Front Left
  • Front Right
  • 3.5L V6 3497CC/215CID
  • Cutting and Welding Required During Installation
  • CAN
Chrysler Intrepid 1995
  • Front Left
  • Front Right
  • 3.5L V6 3497CC/215CID
  • Cutting and Welding Required During Installation
  • CAN
Ford Granada 1982
  • Front Left
  • Front Right
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Ford LTD 1979
  • Front Left
  • Front Right
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Ford LTD 1980
  • Front Left
  • Front Right
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Ford LTD 1983
  • Front
  • 2.3L L4 140CID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
Ford Mustang 1980
  • Front
  • 2.3L L4 140CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Ford Mustang 1981
  • Front
  • 2.3L L4 140CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Ford Mustang 1982
  • Front
  • 2.3L L4 140CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Infiniti Q45 1990
  • Left
  • Right
  • 4.5L V8 4494CC
  • Cutting and Welding Required During Installation
Infiniti Q45 1991
  • Left
  • Right
  • 4.5L V8 4494CC
  • Cutting and Welding Required During Installation
Infiniti Q45 1992
  • Left
  • Right
  • 4.5L V8 4494CC
  • Cutting and Welding Required During Installation
Infiniti Q45 1993
  • Left
  • Right
  • 4.5L V8 4494CC
  • Cutting and Welding Required During Installation
Infiniti Q45 1994
  • Right
  • Left
  • 4.5L V8 4494CC
  • Cutting and Welding Required During Installation
Infiniti Q45 1995
  • Right
  • Left
  • 4.5L V8 4494CC
  • Cutting and Welding Required During Installation
Infiniti Q45 1996
  • Right
  • Left
  • 4.5L V8 4494CC
  • Cutting and Welding Required During Installation
Jaguar Vanden Plas 1990
  • Front Left
  • Front Right
  • 4L L6 3980CC
  • Cutting and Welding Required During Installation
Jaguar Vanden Plas 1991
  • Front Left
  • Front Right
  • 4L L6 3980CC
  • Cutting and Welding Required During Installation
Jaguar Vanden Plas 1992
  • Front Left
  • Front Right
  • 4L L6 3980CC
  • Cutting and Welding Required During Installation
Jaguar Vanden Plas 1993
  • Front Left
  • Front Right
  • 4L L6 3980CC
  • Cutting and Welding Required During Installation
Jaguar Vanden Plas 1994
  • Front Left
  • Front Right
  • 4L L6 3980CC
  • Cutting and Welding Required During Installation
Jaguar XJ6 1983
  • Front
  • 4.2L L6 4235CC
  • Cutting and Welding Required During Installation
  • CAN
Jaguar XJ6 1984
  • Front
  • 4.2L L6 4235CC
  • Cutting and Welding Required During Installation
  • CAN
Jaguar XJ6 1985
  • Front
  • 4.2L L6 4235CC
  • Cutting and Welding Required During Installation
  • CAN
Jaguar XJ6 1986
  • Front
  • 4.2L L6 4235CC
  • Cutting and Welding Required During Installation
  • CAN
Jaguar XJ6 1987
  • Front
  • 4.2L L6 4235CC
  • Cutting and Welding Required During Installation
  • CAN
Jaguar XJ6 1990
  • Front Left
  • Front Right
  • 4L L6 3980CC
  • Cutting and Welding Required During Installation
  • USA
  • CAN
Jaguar XJ6 1991
  • Front Left
  • Front Right
  • Front
  • 4L L6 3980CC
  • Cutting and Welding Required During Installation
  • USA
  • CAN
Jaguar XJ6 1992
  • Front Left
  • Front Right
  • 4L L6 3980CC
  • Cutting and Welding Required During Installation
  • USA
  • CAN
Jaguar XJ6 1993
  • Front Right
  • Front Left
  • 4L L6 3980CC
  • Cutting and Welding Required During Installation
Jaguar XJ6 1994
  • Front Right
  • Front Left
  • 4L L6 3980CC
  • Cutting and Welding Required During Installation
Jaguar XJS 1980
  • Front Right
  • Front Left
  • 5.3L V12 5343CC
  • Cutting and Welding Required During Installation
Jaguar XJS 1981
  • Front Right
  • Front Left
  • 5.3L V12 5343CC
  • Cutting and Welding Required During Installation
Jaguar XJS 1982
  • Front Right
  • Front Left
  • 5.3L V12 5343CC
  • Cutting and Welding Required During Installation
  • USA
  • CAN
Jaguar XJS 1983
  • Front Right
  • Front Left
  • 5.3L V12 5343CC
  • Cutting and Welding Required During Installation
  • USA
  • CAN
Jaguar XJS 1984
  • Front Right
  • Front Left
  • 5.3L V12 5343CC
  • Cutting and Welding Required During Installation
  • USA
  • CAN
Jaguar XJS 1985
  • Front Right
  • Front Left
  • 5.3L V12 5343CC
  • Cutting and Welding Required During Installation
  • USA
  • CAN
Jaguar XJS 1986
  • Front Right
  • Front Left
  • 5.3L V12 5343CC
  • Cutting and Welding Required During Installation
  • USA
  • CAN
Jaguar XJS 1987
  • Front Right
  • Front Left
  • 5.3L V12 5343CC
  • Cutting and Welding Required During Installation
  • USA
  • CAN
Jaguar XJS 1988
  • Front Right
  • Front Left
  • 5.3L V12 5343CC
  • Cutting and Welding Required During Installation
  • USA
  • CAN
Jaguar XJS 1989
  • Front Right
  • Front Left
  • 5.3L V12 5343CC
  • Cutting and Welding Required During Installation
Jaguar XJS 1990
  • Front Right
  • Front Left
  • 5.3L V12 5343CC
  • Cutting and Welding Required During Installation
Jaguar XJS 1991
  • Front Right
  • Front Left
  • 5.3L V12 5343CC
  • Cutting and Welding Required During Installation
Jaguar XJS 1992
  • Front Right
  • Front Left
  • 5.3L V12 5343CC
  • Cutting and Welding Required During Installation
Lincoln Continental 1986
  • Front Left
  • Front Right
  • 5L V8 302CID
  • Single Exhaust
  • Cutting and Welding Required During Installation
Lincoln Continental 1987
  • Front Left
  • Front Right
  • 5L V8 302CID
  • Single Exhaust
  • Cutting and Welding Required During Installation
Lincoln Versailles 1980
  • Front Right
  • Front Left
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Mazda 626 1981
  • 2L L4 1970CC
  • Cutting and Welding Required During Installation
Mazda 626 1982
  • Front
  • 2L L4 1970CC
  • Cutting and Welding Required During Installation
Mazda 808 1975
  • 1.6L L4 1587CC
  • Cutting and Welding Required During Installation
Mazda 808 1976
  • 1.6L L4 1587CC
  • Cutting and Welding Required During Installation
Mazda 808 1977
  • 1.6L L4 1587CC
  • Cutting and Welding Required During Installation
Mazda 929 1992
  • Front Left
  • Front Right
  • 3L V6 2954CC/180CID
  • Cutting and Welding Required During Installation
Mazda 929 1993
  • Front Left
  • Front Right
  • 3L V6 2954CC/180CID
  • Cutting and Welding Required During Installation
Mazda 929 1994
  • Front Left
  • Front Right
  • 3L V6 2954CC/180CID
  • Cutting and Welding Required During Installation
Mazda 929 1995
  • Front Left
  • Front Right
  • 3L V6 2954CC/180CID
  • Cutting and Welding Required During Installation
Mazda RX-7 1984
  • Front Forward
  • Front
  • 1.1L R2 1146CC
  • 1.3L R2 1308CC
  • Cutting and Welding Required During Installation
Mazda RX-7 1985
  • Front
  • 1.1L R2 1146CC
  • 1.3L R2 1308CC
  • Cutting and Welding Required During Installation
Mazda RX-7 1993
  • Front
  • 1.3L R2 1308CC
  • Cutting and Welding Required During Installation
Mazda RX-7 1994
  • Front
  • 1.3L R2 1308CC
  • Cutting and Welding Required During Installation
Mazda RX-7 1995
  • Front
  • 1.3L R2 1308CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 280CE 1980
  • Front
  • 2.8L L6 2746CC
  • From Chassis # 016971
  • Cutting and Welding Required During Installation
Mercedes-Benz 280CE 1981
  • Front Right
  • Front Left
  • 2.8L L6 2778CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 280E 1980
  • Front
  • 2.8L L6 2746CC
  • From Chassis # 063891
  • Cutting and Welding Required During Installation
Mercedes-Benz 280E 1981
  • Front Right
  • Front Left
  • 2.8L L6 2778CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 280SE 1980
  • Front
  • 2.8L L6 2746CC
  • From Chassis # 0150380
  • Cutting and Welding Required During Installation
Mercedes-Benz 300E 1993
  • Front Right
  • Front Left
  • 2.8L L6 2799CC
  • 3.2L L6 3199CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 300SE 1988
  • Front Right
  • Front Left
  • 3L L6 2962CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 300SE 1989
  • Front Right
  • Front Left
  • 3L L6 2962CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 300SE 1990
  • Front Right
  • Front Left
  • 3L L6 2962CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 300SE 1991
  • Front Right
  • Front Left
  • 3L L6 2962CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 300SE 1992
  • Front Right
  • Front Left
  • 3.2L L6 3199CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 300SE 1993
  • Front Right
  • Front Left
  • 3.2L L6 3199CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 300SEL 1988
  • Front Right
  • Front Left
  • 3L L6 2962CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 300SEL 1989
  • Front Right
  • Front Left
  • 3L L6 2962CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 300SEL 1990
  • Front Right
  • Front Left
  • 3L L6 2962CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 300SEL 1991
  • Front Right
  • Front Left
  • 3L L6 2962CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 300SL 1990
  • Front Right
  • Front Left
  • 3L L6 2962CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 300SL 1991
  • Front Right
  • Front Left
  • 3L L6 2962CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 300SL 1992
  • Front Right
  • Front Left
  • 3L L6 2962CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 300SL 1993
  • Front Right
  • Front Left
  • 3L L6 2962CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 300TE 1993
  • Front Right
  • Front Left
  • 3.2L L6 3199CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 380SE 1984
  • Front
  • 3.8L V8 3839CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 380SE 1985
  • Front
  • 3.8L V8 3839CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 380SEC 1982
  • Front
  • 3.8L V8 3839CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 380SEC 1983
  • Front
  • 3.8L V8 3839CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 380SEL 1981
  • Front
  • 3.8L V8 3839CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 380SEL 1982
  • Front
  • 3.8L V8 3839CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 380SEL 1983
  • Front
  • 3.8L V8 3839CC
  • Cutting and Welding Required During Installation
Mercury Capri 1980
  • Front
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Mercury Capri 1981
  • Front
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Mercury Capri 1982
  • Front
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Mercury Capri 1983
  • Front
  • 2.3L L4 140CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Mercury Grand Marquis 1979
  • Front Right
  • Front Left
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Mercury Grand Marquis 1980
  • Front Right
  • Front Left
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Mercury Marquis 1979
  • Front Left
  • Front Right
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Mercury Marquis 1980
  • Front Left
  • Front Right
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Mercury Marquis 1983
  • Front
  • 2.3L L4 140CID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
Mercury Monarch 1980
  • Front
  • 4.2L V8 255CID
  • Cutting and Welding Required During Installation
Subaru Justy 1987
  • Front
  • 1.2L L3 1189CC
  • Cutting and Welding Required During Installation
Subaru Justy 1988
  • Front
  • 1.2L L3 1189CC
  • Cutting and Welding Required During Installation
Subaru Justy 1989
  • Front
  • 1.2L L3 1189CC
  • Cutting and Welding Required During Installation
Subaru Justy 1990
  • Front
  • 1.2L L3 1189CC
  • Cutting and Welding Required During Installation
Subaru Justy 1991
  • Front
  • 1.2L L3 1189CC
  • Cutting and Welding Required During Installation
Subaru Justy 1992
  • Front
  • 1.2L L3 1189CC
  • Cutting and Welding Required During Installation
Subaru Justy 1993
  • Front
  • 1.2L L3 1189CC
  • Cutting and Welding Required During Installation
Subaru Justy 1994
  • Front
  • 1.2L L3 1189CC
  • Cutting and Welding Required During Installation
Subaru Loyale 1990
  • Front
  • 1.8L H4 1781CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Subaru SVX 1992
  • Front Right
  • Front Left
  • 3.3L H6 3318CC
  • Cutting and Welding Required During Installation
Subaru SVX 1993
  • Front Right
  • Front Left
  • 3.3L H6 3318CC
  • Cutting and Welding Required During Installation
Subaru SVX 1994
  • Front Right
  • Front Left
  • 3.3L H6 3318CC
  • Cutting and Welding Required During Installation
Subaru SVX 1995
  • Front Right
  • Front Left
  • 3.3L H6 3318CC
  • Cutting and Welding Required During Installation
Toyota Celica 1979
  • Front
  • 2.6L L6 2563CC
  • Cutting and Welding Required During Installation
Toyota Celica 1980
  • Front
  • 2.6L L6 2563CC
  • Cutting and Welding Required During Installation
Toyota Celica 1981
  • Front
  • 2.8L L6 2759CC
  • Cutting and Welding Required During Installation
Toyota Corolla 1981
  • Front
  • 1.8L L4 1770CC
  • Cutting and Welding Required During Installation
Toyota Corolla 1982
  • Front
  • 1.8L L4 1770CC
  • Cutting and Welding Required During Installation
Toyota Cressida 1981
  • Front
  • 2.8L L6 2759CC
  • Cutting and Welding Required During Installation
Toyota Cressida 1982
  • Front
  • 2.8L L6 2759CC
  • Cutting and Welding Required During Installation