100% BASÉ AU CANADA 100% CANADIEN
SANS FRAIS DE COURTAGE EN DOUANE SANS FRAIS DE DOUANE
MARCHAND AUTORISÉ MARCHAND AUTORISÉ
30 JOURS – RETOURS SANS TRACAS 30 JOURS – RETOURS

MagnaFlowStainless Federal Catalytic Converter without Sensor Port (2" IN\/2" OUT)

DISTRIBUTEUR AUTORISÉ

53004

Numéro de Pièce du Fabricant
*Les images sont à titre illustratif seulement. Le produit réel peut varier.
SKU: MAG-53004
Sélectionnez un véhicule pour vérifier la compatibilité.

Sélectionnez un Véhicule

Cela servira à vous montrer les pièces compatibles.

Auto Parts Finder

Ce produit n'est pas compatible avec votre sélection!

Le produit affiché sur cette page n'est pas compatible avec vehicle

!
Afin d'assurer la bonne compatibilité des pièces, veuillez parcourir des produits compatibles ou changer votre sélection.


Changer la Sélection Actuelle
Livraison GRATUITE*
Garantie Standard

Commande Spéciale
1-3 Semaines
133,00 CA $
Stainless Federal Catalytic Converter without Sensor Port (2" IN\/2" OUT) doit être acheté par multiple de 1
DISTRIBUTEUR AUTORISÉ

53004

Numéro de Pièce du Fabricant
Plus d’information
Fabricant MagnaFlow
Numéro de Pièce du Fabricant 53004
Prix de Détail Suggéré du Fabricant (MSRP) 103,93
Rédigez votre propre commentaire
Seuls les utilisateurs sauvegardés peuvent soumettre leur avis. Veuillez vous connecter ou créer un compte
This table represents all the 651 compatible vehicles for this part:
Marque Modèle Année
Application Notes
Position Submodel Transmission Body Type Drive Type Engine Aspiration Additional Information
Acura Integra 1986
  • 1.6L L4 1590CC
  • Cutting and Welding Required During Installation
Acura Integra 1987
  • 1.6L L4 1590CC
  • Cutting and Welding Required During Installation
Acura Integra 1988
  • 1.6L L4 1590CC
  • Cutting and Welding Required During Installation
Acura Integra 1989
  • 1.6L L4 1590CC
  • Cutting and Welding Required During Installation
Acura Integra 1990
  • 1.8L L4 1834CC
  • Cutting and Welding Required During Installation
Acura Integra 1991
  • 1.8L L4 1834CC
  • Cutting and Welding Required During Installation
Acura Integra 1992
  • 1.7L L4 1678CC
  • 1.8L L4 1834CC
  • Cutting and Welding Required During Installation
Acura Integra 1993
  • 1.7L L4 1678CC
  • 1.8L L4 1834CC
  • Cutting and Welding Required During Installation
Acura Integra 1994
  • GS-R
  • LS
  • RS
  • 1.8L L4 1797CC
  • 1.8L L4 1834CC
  • Cutting and Welding Required During Installation
Acura Integra 1995
  • GS-R
  • LS
  • RS
  • Special Edition
  • 1.8L L4 1797CC
  • 1.8L L4 1834CC
  • Cutting and Welding Required During Installation
Acura Legend 1986
  • 2.5L V6 2494CC
  • Cutting and Welding Required During Installation
Acura Legend 1987
  • 2.5L V6 2494CC
  • 2.7L V6 2675CC
  • Cutting and Welding Required During Installation
Acura Legend 1988
  • 2.7L V6 2675CC
  • Cutting and Welding Required During Installation
Acura Legend 1989
  • 2.7L V6 2675CC
  • Cutting and Welding Required During Installation
Acura Legend 1990
  • 2.7L V6 2675CC
  • Cutting and Welding Required During Installation
Acura Vigor 1992
  • 2.5L L5 2451CC
  • Cutting and Welding Required During Installation
Acura Vigor 1993
  • 2.5L L5 2451CC
  • Cutting and Welding Required During Installation
Acura Vigor 1994
  • 2.5L L5 2451CC
  • Cutting and Welding Required During Installation
Audi 90 Quattro 1993
  • Right
  • Left
  • 2.8L V6
  • Cutting and Welding Required During Installation
Audi 90 Quattro 1994
  • Right
  • Left
  • 2.8L V6
  • Cutting and Welding Required During Installation
Audi 90 Quattro 1995
  • Right
  • Left
  • 2.8L V6
  • Cutting and Welding Required During Installation
Audi 100 Quattro 1992
  • Left
  • Right
  • 2.8L V6
  • Cutting and Welding Required During Installation
Audi 100 Quattro 1993
  • Left
  • Right
  • 2.8L V6
  • Cutting and Welding Required During Installation
Audi 100 Quattro 1994
  • Left
  • Right
  • 2.8L V6
  • Cutting and Welding Required During Installation
Audi 4000 Quattro 1985
  • 2.2L L5 2226CC
  • Cutting and Welding Required During Installation
Audi 4000 Quattro 1986
  • 2.2L L5 2226CC
  • Cutting and Welding Required During Installation
Audi 4000 Quattro 1987
  • 2.2L L5 2226CC
  • Cutting and Welding Required During Installation
Audi 90 1993
  • Right
  • Left
  • Standard
  • Automatic
  • 2.8L V6
  • Cutting and Welding Required During Installation
Audi 90 1994
  • Left
  • Right
  • 2.8L V6
  • Cutting and Welding Required During Installation
Audi 90 1995
  • Left
  • Right
  • 2.8L V6
  • Cutting and Welding Required During Installation
Audi 100 1992
  • Left
  • Right
  • Standard
  • 2.8L V6
  • Cutting and Welding Required During Installation
Audi 100 1993
  • Left
  • Right
  • Standard
  • 2.8L V6
  • Cutting and Welding Required During Installation
Audi 100 1994
  • Left
  • Right
  • Standard
  • 2.8L V6
  • Cutting and Welding Required During Installation
Audi 5000 1985
  • 2.2L L5 2226CC
  • Cutting and Welding Required During Installation
Audi Cabriolet 1994
  • Left
  • Right
  • 2.8L V6
  • Cutting and Welding Required During Installation
Audi Cabriolet 1995
  • Left
  • Right
  • 2.8L V6
  • Cutting and Welding Required During Installation
Audi S4 1992
  • 2.2L L5 2226CC
  • Cutting and Welding Required During Installation
Audi S4 1993
  • 2.2L L5 2226CC
  • Cutting and Welding Required During Installation
Audi S4 1994
  • 2.2L L5 2226CC
  • Cutting and Welding Required During Installation
Audi S6 1995
  • Left
  • Right
  • 2.2L L5 2226CC
  • Cutting and Welding Required During Installation
BMW M3 1988
  • Front
  • Left
  • Rear Right
  • 2.3L L4 2302CC
  • Cutting and Welding Required During Installation
BMW M3 1989
  • Front
  • Left
  • Rear Right
  • 2.3L L4 2302CC
  • Cutting and Welding Required During Installation
BMW M3 1990
  • Front
  • Left
  • Rear Right
  • 2.3L L4 2302CC
  • Cutting and Welding Required During Installation
BMW M3 1991
  • Front
  • Left
  • Rear Right
  • 2.3L L4 2302CC
  • Cutting and Welding Required During Installation
Chevrolet Nova 1988
  • 1.6L L4 1588CC/98cCID
  • 5
  • Cutting and Welding Required During Installation
Chrysler Concorde 1993
  • Front Left
  • Front Right
  • 3.5L V6 3497CC/215CID
  • 3.3L V6 3301CC/201CID
  • Cutting and Welding Required During Installation
Chrysler Concorde 1994
  • Front Left
  • Front Right
  • 3.5L V6 3497CC/215CID
  • 3.3L V6 3301CC/201CID
  • Cutting and Welding Required During Installation
Chrysler Concorde 1995
  • Front Left
  • Front Right
  • 3.5L V6 3497CC/215CID
  • 3.3L V6 3301CC/201CID
  • Cutting and Welding Required During Installation
Chrysler LHS 1994
  • Front Left
  • Front Right
  • 3.5L V6 3497CC/215CID
  • Cutting and Welding Required During Installation
Chrysler LHS 1995
  • Front Left
  • Front Right
  • 3.5L V6 3497CC/215CID
  • Cutting and Welding Required During Installation
Chrysler New Yorker 1994
  • Front Left
  • Front Right
  • 3.5L V6 3497CC/215CID
  • Cutting and Welding Required During Installation
Chrysler New Yorker 1995
  • Front Left
  • Front Right
  • 3.5L V6 3497CC/215CID
  • Cutting and Welding Required During Installation
Dodge Challenger 1978
  • 1.6L L4 1597CC/98cCID
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Dodge Challenger 1979
  • 1.6L L4 1597CC/98cCID
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Dodge Challenger 1980
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Dodge Challenger 1981
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Dodge Challenger 1982
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Dodge Challenger 1983
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Dodge Colt 1975
  • 1.6L L4 1597CC/98cCID
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
Dodge Colt 1976
  • 1.6L L4 1597CC/98cCID
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
Dodge Colt 1977
  • 1.6L L4 1597CC/98cCID
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
Dodge Colt 1978
  • 1.6L L4 1597CC/98cCID
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Dodge Colt 1979
  • 1.6L L4 1597CC/98cCID
  • 1.4L L4 1410CC
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Dodge Colt 1980
  • 1.6L L4 1597CC/98cCID
  • 1.4L L4 1410CC
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Dodge Colt 1981
  • Rear
  • 1.6L L4 1597CC/98cCID
  • 1.4L L4 1410CC
  • Cutting and Welding Required During Installation
Dodge Colt 1982
  • Rear
  • 1.6L L4 1597CC/98cCID
  • 1.4L L4 1410CC
  • Cutting and Welding Required During Installation
Dodge Colt 1983
  • Rear
  • 1.6L L4 1597CC/98cCID
  • 1.4L L4 1410CC
  • Cutting and Welding Required During Installation
Dodge Colt 1984
  • Rear
  • 1.6L L4 1597CC/98cCID
  • 1.4L L4 1410CC
  • 2L L4 1997CC/122CID
  • Naturally Aspirated
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge Colt 1985
  • Rear
  • 1.6L L4 1597CC/98cCID
  • 2L L4 1997CC/122CID
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
Dodge Colt 1986
  • Rear
  • 1.6L L4 1597CC/98cCID
  • 2L L4 1997CC/122CID
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
  • Split Date To: To 12/1986
Dodge Colt 1987
  • 1.6L L4 1597CC/98cCID
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
Dodge Colt 1988
  • 1.6L L4 1597CC/98cCID
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
Dodge Colt 1989
  • Hatchback
  • 1.6L L4 1597CC/98cCID
  • 1.8L L4 1754CC/107CID
  • Cutting and Welding Required During Installation
  • USA
  • CAN
Dodge Colt 1990
  • 1.6L L4 1597CC/98cCID
  • 1.8L L4 1754CC/107CID
  • Cutting and Welding Required During Installation
Dodge Colt 1991
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
Dodge Colt 1992
  • 1.5L L4 1468CC/90cCID
  • 1.8L L4 1834CC/112CID
  • Cutting and Welding Required During Installation
  • CAN
Dodge Colt 1993
  • 1.8L L4 1834CC/112CID
  • 1.5L L4 1468CC/90cCID
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
  • CAN
Dodge Colt 1994
  • 1.8L L4 1834CC/112CID
  • 1.5L L4 1468CC/90cCID
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
  • CAN
Dodge D50 1979
  • 2.6L L4 2555CC/156CID
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
Dodge D50 1980
  • 2.6L L4 2555CC/156CID
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
Dodge D50 1981
  • 2.6L L4 2555CC/156CID
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
Dodge D50 1982
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Dodge Intrepid 1993
  • Front Left
  • Front Right
  • 3.5L V6 3497CC/215CID
  • 3.3L V6 3301CC/201CID
  • Cutting and Welding Required During Installation
Dodge Intrepid 1994
  • Front Left
  • Front Right
  • 3.5L V6 3497CC/215CID
  • 3.3L V6 3301CC/201CID
  • Cutting and Welding Required During Installation
Dodge Intrepid 1995
  • Front Left
  • Front Right
  • 3.5L V6 3497CC/215CID
  • 3.3L V6 3301CC/201CID
  • Cutting and Welding Required During Installation
Dodge Power Ram 50 1983
  • 2.6L L4 2555CC/156CID
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
Dodge Power Ram 50 1984
  • 2.6L L4 2555CC/156CID
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
Dodge Power Ram 50 1985
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Dodge Power Ram 50 1986
  • Rear
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Dodge Raider 1987
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Dodge Raider 1988
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Dodge Raider 1989
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Dodge Ram 50 1983
  • 2.6L L4 2555CC/156CID
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
Dodge Ram 50 1984
  • 2.6L L4 2555CC/156CID
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
Dodge Ram 50 1985
  • 2.6L L4 2555CC/156CID
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
Dodge Ram 50 1986
  • Rear
  • 2.6L L4 2555CC/156CID
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
Dodge Ram 50 1987
  • 2.6L L4 2555CC/156CID
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
Dodge Ram 50 1988
  • 2.6L L4 2555CC/156CID
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
Dodge Ram 50 1989
  • 2.6L L4 2555CC/156CID
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
Dodge Ram 50 1990
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Dodge Ram 50 1991
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Dodge Ram 50 1992
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Dodge Ram 50 1993
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Dodge Ramcharger 1987
  • Front
  • 4WD
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge Ramcharger 1988
  • Front
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Eagle 2000 GTX 1993
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
  • CAN
Eagle Summit 1989
  • 1.6L L4 1597CC/98cCID
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
Eagle Summit 1990
  • 1.6L L4 1597CC/98cCID
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
Eagle Summit 1991
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
Eagle Summit 1992
  • 2.4L L4 2351CC
  • 1.8L L4 1834CC/112CID
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
Eagle Summit 1993
  • Sedan
  • Wagon
  • 2.4L L4 2351CC
  • 1.8L L4 1834CC/112CID
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
Eagle Summit 1994
  • Sedan
  • Wagon
  • 2.4L L4 2351CC
  • 1.8L L4 1834CC/112CID
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
Eagle Summit 1995
  • Sedan
  • Wagon
  • 2.4L L4 2351CC
  • 1.8L L4 1834CC/112CID
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
Eagle Vision 1993
  • Front Left
  • Front Right
  • 3.5L V6 3497CC/215CID
  • 3.3L V6 3301CC/201CID
  • Cutting and Welding Required During Installation
Eagle Vision 1994
  • Front Left
  • Front Right
  • 3.5L V6 3497CC/215CID
  • 3.3L V6 3301CC/201CID
  • Cutting and Welding Required During Installation
Eagle Vision 1995
  • Front Left
  • Front Right
  • 3.5L V6 3497CC/215CID
  • 3.3L V6 3301CC/201CID
  • Cutting and Welding Required During Installation
Ford Custom 500 1975
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford Custom 500 1976
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford Escort 1986
  • 1.9L L4 116CID
  • 9
  • Cutting and Welding Required During Installation
Ford Escort 1987
  • 1.9L L4 116CID
  • 9
  • Cutting and Welding Required During Installation
Ford Escort 1988
  • 1.9L L4 116CID
  • 9
  • Cutting and Welding Required During Installation
Ford Escort 1989
  • 1.9L L4 116CID
  • 9
  • Cutting and Welding Required During Installation
Ford Escort 1990
  • 1.9L L4 116CID
  • 9
  • Cutting and Welding Required During Installation
Ford Escort 1991
  • 1.9L L4 116CID
  • without Exhaust Gas Recirculation (EGR) Fitting On Outlet Pipe
  • Cutting and Welding Required During Installation
  • with Exhaust Gas Recirculation (EGR) On Outlet Pipe
Ford Escort 1992
  • 1.9L L4 116CID
  • without Exhaust Gas Recirculation (EGR) Fitting On Outlet Pipe
  • Cutting and Welding Required During Installation
  • with Exhaust Gas Recirculation (EGR) On Outlet Pipe
Ford Escort 1993
  • 1.9L L4 116CID
  • without Exhaust Gas Recirculation (EGR) Fitting On Outlet Pipe
  • Cutting and Welding Required During Installation
  • with Exhaust Gas Recirculation (EGR) On Outlet Pipe
Ford Escort 1994
  • 1.9L L4 116CID
  • without Exhaust Gas Recirculation (EGR) Fitting On Outlet Pipe
  • Cutting and Welding Required During Installation
  • with Exhaust Gas Recirculation (EGR) On Outlet Pipe
Ford Escort 1995
  • 1.9L L4 116CID
  • without Exhaust Gas Recirculation (EGR) Fitting On Outlet Pipe
  • Cutting and Welding Required During Installation
  • with Exhaust Gas Recirculation (EGR) On Outlet Pipe
Ford EXP 1987
  • 1.9L L4 116CID
  • 9
  • Cutting and Welding Required During Installation
Ford EXP 1988
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Ford Festiva 1989
  • Automatic
  • 1.3L L4 1295CC
  • Cutting and Welding Required During Installation
Ford Festiva 1990
  • 1.3L L4 1295CC
  • Cutting and Welding Required During Installation
Ford Festiva 1991
  • 1.3L L4 1295CC
  • Cutting and Welding Required During Installation
Ford Festiva 1992
  • 1.3L L4 1295CC
  • Cutting and Welding Required During Installation
Ford Festiva 1993
  • 1.3L L4 1295CC
  • Cutting and Welding Required During Installation
Ford Ranchero 1975
  • Right
  • Left
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford Ranchero 1976
  • Left
  • Right
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford Ranchero 1977
  • Right
  • Left
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford Ranchero 1978
  • Left
  • Right
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford Ranchero 1979
  • Right
  • Left
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Geo Prizm 1989
  • 1.6L L4 1588CC/98cCID
  • Cutting and Welding Required During Installation
Geo Prizm 1990
  • 1.6L L4 1587CC
  • Cutting and Welding Required During Installation
Geo Prizm 1991
  • 1.6L L4 1587CC
  • Cutting and Welding Required During Installation
Geo Prizm 1992
  • 1.6L L4 1587CC
  • Cutting and Welding Required During Installation
Geo Prizm 1993
  • Rear
  • 1.8L L4 1762CC
  • 1.6L L4 1588CC/98cCID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
Geo Prizm 1994
  • Rear
  • 1.8L L4 1762CC
  • 1.6L L4 1588CC/98cCID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
Geo Prizm 1995
  • Rear
  • 1.8L L4 1762CC
  • 1.6L L4 1588CC/98cCID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
Honda Accord 1980
  • 1.8L L4 1751CC
  • Cutting and Welding Required During Installation
Honda Accord 1981
  • 1.8L L4 1751CC
  • Cutting and Welding Required During Installation
Honda Accord 1982
  • 1.8L L4 1751CC
  • Cutting and Welding Required During Installation
Honda Accord 1983
  • 1.8L L4 1751CC
  • Cutting and Welding Required During Installation
Honda Accord 1984
  • 1.8L L4 1829CC
  • Cutting and Welding Required During Installation
Honda Accord 1985
  • 1.8L L4 1829CC
  • Cutting and Welding Required During Installation
Honda Accord 1986
  • 2L L4 1955CC
  • Cutting and Welding Required During Installation
Honda Accord 1987
  • 2L L4 1955CC
  • Cutting and Welding Required During Installation
  • USA
  • CAN
Honda Accord 1988
  • 2L L4 1955CC
  • Cutting and Welding Required During Installation
  • USA
  • CAN
Honda Accord 1989
  • 2L L4 1955CC
  • Cutting and Welding Required During Installation
  • USA
  • CAN
Honda Accord 1990
  • 2.2L L4 2156CC
  • Cutting and Welding Required During Installation
Honda Accord 1991
  • SE
  • LX
  • Wagon
  • 2.2L L4 2156CC
  • Cutting and Welding Required During Installation
Honda Accord 1992
  • LX
  • DX
  • 2.2L L4 2156CC
  • Cutting and Welding Required During Installation
Honda Accord 1993
  • SE
  • 2.2L L4 2156CC
  • Cutting and Welding Required During Installation
Honda Accord 1994
  • 2.2L L4 2156CC
  • Cutting and Welding Required During Installation
Honda Accord 1995
  • 2.2L L4 2156CC
  • Cutting and Welding Required During Installation
Honda Civic 1980
  • 1.3L L4 1335CC
  • 1.5L L4 1487CC
  • Cutting and Welding Required During Installation
Honda Civic 1981
  • 1.3L L4 1335CC
  • 1.5L L4 1487CC
  • Cutting and Welding Required During Installation
Honda Civic 1982
  • 1.3L L4 1335CC
  • 1.5L L4 1487CC
  • Cutting and Welding Required During Installation
Honda Civic 1983
  • 1.3L L4 1335CC
  • 1.5L L4 1487CC
  • Cutting and Welding Required During Installation
Honda Civic 1985
  • CRX Si
  • Base
  • DX
  • 1500 S
  • CRX
  • CRX HF
  • Hatchback
  • Wagon
  • Sedan
  • 1.5L L4 1487CC
  • Cutting and Welding Required During Installation
Honda Civic 1986
  • Front
  • CRX Si
  • Si
  • CRX
  • DX
  • CRX HF
  • Base
  • Sedan
  • Wagon
  • Hatchback
  • 1.5L L4 1487CC
  • 1.5L L4 1493CC
  • Cutting and Welding Required During Installation
Honda Civic 1987
  • Front
  • Base
  • CRX Si
  • Si
  • DX
  • CRX
  • CRX HF
  • Hatchback
  • Wagon
  • Sedan
  • 1.5L L4 1487CC
  • Cutting and Welding Required During Installation
Honda Civic 1988
  • Wagon
  • 1.5L L4 1493CC
  • 1.6L L4 1588CC/98cCID
  • Cutting and Welding Required During Installation
Honda Civic 1989
  • 1.5L L4 1493CC
  • 1.6L L4 1588CC/98cCID
  • Cutting and Welding Required During Installation
Honda Civic 1990
  • 1.5L L4 1493CC
  • 1.6L L4 1588CC/98cCID
  • Cutting and Welding Required During Installation
Honda Civic 1991
  • 1.5L L4 1493CC
  • 1.6L L4 1588CC/98cCID
  • Cutting and Welding Required During Installation
Honda Civic 1992
  • DX
  • LX
  • Sedan
  • 1.6L L4 1588CC/98cCID
  • 1.5L L4 1493CC
  • Cutting and Welding Required During Installation
Honda Civic 1993
  • DX
  • LX
  • CX
  • Coupe
  • Sedan
  • 1.6L L4 1588CC/98cCID
  • 1.5L L4 1493CC
  • Cutting and Welding Required During Installation
Honda Civic 1994
  • LX
  • DX
  • CX
  • 1.6L L4 1588CC/98cCID
  • 1.5L L4 1493CC
  • Cutting and Welding Required During Installation
Honda Civic 1995
  • LX
  • CX
  • VX
  • 1.6L L4 1588CC/98cCID
  • 1.5L L4 1493CC
  • Cutting and Welding Required During Installation
Honda Civic del Sol 1993
  • 1.6L L4 1588CC/98cCID
  • 1.5L L4 1493CC
  • Cutting and Welding Required During Installation
Honda Civic del Sol 1994
  • 1.6L L4 1588CC/98cCID
  • 1.5L L4 1493CC
  • Cutting and Welding Required During Installation
Honda Civic del Sol 1995
  • 1.6L L4 1588CC/98cCID
  • 1.5L L4 1493CC
  • Cutting and Welding Required During Installation
Honda CRX 1988
  • 1.6L L4 1588CC/98cCID
  • Cutting and Welding Required During Installation
Honda CRX 1989
  • 1.6L L4 1588CC/98cCID
  • Cutting and Welding Required During Installation
Honda CRX 1990
  • 1.6L L4 1588CC/98cCID
  • Cutting and Welding Required During Installation
Honda CRX 1991
  • 1.6L L4 1588CC/98cCID
  • Cutting and Welding Required During Installation
Honda Prelude 1979
  • 1.8L L4 1751CC
  • Cutting and Welding Required During Installation
Honda Prelude 1980
  • 1.8L L4 1751CC
  • Cutting and Welding Required During Installation
Honda Prelude 1981
  • 1.8L L4 1751CC
  • Cutting and Welding Required During Installation
Honda Prelude 1982
  • 1.8L L4 1751CC
  • Cutting and Welding Required During Installation
Honda Prelude 1983
  • 1.8L L4 1829CC
  • Cutting and Welding Required During Installation
Honda Prelude 1984
  • 1.8L L4 1829CC
  • Cutting and Welding Required During Installation
Honda Prelude 1985
  • 1.8L L4 1829CC
  • 2L L4 1955CC
  • Cutting and Welding Required During Installation
Honda Prelude 1986
  • 1.8L L4 1829CC
  • 2L L4 1955CC
  • Cutting and Welding Required During Installation
Honda Prelude 1987
  • 1.8L L4 1829CC
  • 2L L4 1955CC
  • Cutting and Welding Required During Installation
Honda Prelude 1988
  • 2.0 S
  • 2.0 Si
  • 2L L4 1958CC
  • Cutting and Welding Required During Installation
Honda Prelude 1989
  • 2.0 S
  • 2.0 Si
  • 2L L4 1958CC
  • Cutting and Welding Required During Installation
Honda Prelude 1990
  • 2.0 S
  • Si
  • 2.0 Si
  • Si ALB
  • SR
  • 2L L4 1958CC
  • 2.1L L4 2056CC
  • Cutting and Welding Required During Installation
  • CAN
Honda Prelude 1991
  • 2.0 Si
  • Si
  • 2L L4 1958CC
  • 2.1L L4 2056CC
  • Cutting and Welding Required During Installation
  • CAN
Honda Prelude 1992
  • 2.2L L4 2156CC
  • 2.3L L4 2259CC
  • Cutting and Welding Required During Installation
Honda Prelude 1993
  • 2.2L L4 2156CC
  • 2.3L L4 2259CC
  • Cutting and Welding Required During Installation
Honda Prelude 1994
  • 2.2L L4 2156CC
  • 2.3L L4 2259CC
  • Cutting and Welding Required During Installation
Honda Prelude 1995
  • 2.2L L4 2156CC
  • 2.3L L4 2259CC
  • Cutting and Welding Required During Installation
Honda Prelude 1996
  • 2.3L L4 2259CC
  • 2.2L L4 2156CC
  • Cutting and Welding Required During Installation
  • Split Date To: To 11/1996
Hyundai Excel 1986
  • Rear
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
Hyundai Excel 1987
  • Rear
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
Hyundai Excel 1988
  • Rear
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
Hyundai Excel 1989
  • Rear
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
Hyundai Excel 1990
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
Hyundai Excel 1991
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
Hyundai Excel 1992
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
Hyundai Excel 1993
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
Hyundai Excel 1994
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
Hyundai Scoupe 1991
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
Hyundai Scoupe 1992
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
Jaguar Vanden Plas 1988
  • Front
  • 3.6L L6 3590CC
  • Cutting and Welding Required During Installation
Jaguar Vanden Plas 1989
  • Front
  • 3.6L L6 3590CC
  • Cutting and Welding Required During Installation
Jaguar XJ6 1988
  • Front
  • 3.6L L6 3590CC
  • Cutting and Welding Required During Installation
Jaguar XJ6 1989
  • Front
  • 3.6L L6 3590CC
  • Cutting and Welding Required During Installation
Jaguar XJ12 1976
  • Left
  • Right
  • 5.3L V12 5343CC
  • Cutting and Welding Required During Installation
Jaguar XJ12 1977
  • Left
  • Right
  • 5.3L V12 5343CC
  • Cutting and Welding Required During Installation
Jaguar XJ12 1978
  • Left
  • Right
  • 5.3L V12 5343CC
  • Cutting and Welding Required During Installation
Jaguar XJ12 1979
  • Left
  • Right
  • 5.3L V12 5343CC
  • Cutting and Welding Required During Installation
Kia Sephia 1995
  • 1.8L L4 1839CC
  • Cutting and Welding Required During Installation
Mazda 626 1983
  • Rear
  • 2L L4 1970CC
  • Cutting and Welding Required During Installation
Mazda 626 1984
  • Rear
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Mazda 626 1985
  • Rear
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Mazda 626 1986
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Mazda 626 1987
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Mazda 929 1990
  • Left
  • Right
  • 3L V6 2954CC/180CID
  • DOHC
  • Cutting and Welding Required During Installation
Mazda 929 1991
  • Left
  • Right
  • 3L V6 2954CC/180CID
  • DOHC
  • Cutting and Welding Required During Installation
Mazda B2000 1983
  • 2L L4 1970CC
  • Cutting and Welding Required During Installation
Mazda B2000 1984
  • 2L L4 1970CC
  • Cutting and Welding Required During Installation
Mazda B2000 1986
  • Rear
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Mazda B2000 1987
  • Rear
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Mazda B2200 1987
  • Rear
  • 2.2L L4 2184CC
  • Cutting and Welding Required During Installation
Mazda B2200 1988
  • Rear
  • 2.2L L4 2184CC
  • Cutting and Welding Required During Installation
Mazda B2200 1989
  • Rear
  • 2.2L L4 2184CC
  • Cutting and Welding Required During Installation
Mazda B2200 1990
  • Rear
  • 2.2L L4 2184CC
  • CARB
  • Cutting and Welding Required During Installation
Mazda B2200 1991
  • Rear
  • 2.2L L4 2184CC
  • CARB
  • Cutting and Welding Required During Installation
Mazda B2200 1992
  • Rear
  • 2.2L L4 2184CC
  • CARB
  • Cutting and Welding Required During Installation
Mazda B2200 1993
  • Rear
  • 2.2L L4 2184CC
  • CARB
  • Cutting and Welding Required During Installation
Mazda B2600 1987
  • Rear
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Mazda B2600 1988
  • Rear
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Mazda Miata 1990
  • 1.6L L4 1597CC
  • Cutting and Welding Required During Installation
Mazda Miata 1991
  • 1.6L L4 1597CC
  • Cutting and Welding Required During Installation
Mazda Miata 1992
  • 1.6L L4 1597CC
  • Cutting and Welding Required During Installation
Mazda Miata 1993
  • 1.6L L4 1597CC
  • Cutting and Welding Required During Installation
Mazda MX-3 1992
  • 1.8L V6 1845CC
  • Cutting and Welding Required During Installation
Mazda MX-3 1993
  • 1.8L V6 1845CC
  • Cutting and Welding Required During Installation
Mazda MX-3 1994
  • 1.6L L4 1597CC
  • 1.8L V6 1845CC
  • Cutting and Welding Required During Installation
Mazda MX-3 1995
  • Rear
  • 1.6L L4 1597CC
  • 1.6L L4 1597CC/97cCID
  • Cutting and Welding Required During Installation
  • CAN
Mazda RX-7 1981
  • Front
  • 1.1L R2 1146CC
  • Cutting and Welding Required During Installation
Mazda RX-7 1982
  • Front
  • 1.1L R2 1146CC
  • Cutting and Welding Required During Installation
Mazda RX-7 1983
  • Front
  • 1.1L R2 1146CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 300E 1993
  • Rear Right
  • Rear Left
  • 2.8L L6 2799CC
  • 3.2L L6 3199CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 300SE 1992
  • Rear Right
  • Rear Left
  • 3.2L L6 3199CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 300SE 1993
  • Rear Right
  • Rear Left
  • 3.2L L6 3199CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 300TE 1993
  • Rear Right
  • Rear Left
  • 3.2L L6 3199CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 500E 1992
  • 5L V8 4973CC
  • Cutting and Welding Required During Installation
Mercedes-Benz 500E 1993
  • 5L V8 4973CC
  • Cutting and Welding Required During Installation
Mercedes-Benz C220 1994
  • Rear Right
  • Rear Left
  • 2.2L L4 2199CC
  • Cutting and Welding Required During Installation
Mercury Lynx 1986
  • 1.9L L4 116CID
  • 9
  • Cutting and Welding Required During Installation
Mercury Lynx 1987
  • 1.9L L4 116CID
  • 9
  • Cutting and Welding Required During Installation
Mercury Tracer 1991
  • 1.9L L4 116CID
  • without Exhaust Gas Recirculation (EGR) Fitting On Outlet Pipe
  • Cutting and Welding Required During Installation
  • with Exhaust Gas Recirculation (EGR) On Outlet Pipe
Mercury Tracer 1992
  • 1.9L L4 116CID
  • without Exhaust Gas Recirculation (EGR) Fitting On Outlet Pipe
  • Cutting and Welding Required During Installation
  • with Exhaust Gas Recirculation (EGR) On Outlet Pipe
Mercury Tracer 1993
  • 1.9L L4 116CID
  • without Exhaust Gas Recirculation (EGR) Fitting On Outlet Pipe
  • Cutting and Welding Required During Installation
  • with Exhaust Gas Recirculation (EGR) On Outlet Pipe
Mercury Tracer 1994
  • 1.9L L4 116CID
  • without Exhaust Gas Recirculation (EGR) Fitting On Outlet Pipe
  • Cutting and Welding Required During Installation
  • with Exhaust Gas Recirculation (EGR) On Outlet Pipe
Mercury Tracer 1995
  • 1.9L L4 116CID
  • without Exhaust Gas Recirculation (EGR) Fitting On Outlet Pipe
  • Cutting and Welding Required During Installation
  • with Exhaust Gas Recirculation (EGR) On Outlet Pipe
Mercury Villager 1993
  • 3L V6 182CID
  • Cutting and Welding Required During Installation
Mercury Villager 1994
  • Rear
  • 3L V6 182CID
  • Cutting and Welding Required During Installation
Mercury Villager 1995
  • Rear
  • 3L V6 182CID
  • Cutting and Welding Required During Installation
MG Midget 1975
  • 1.5L L4 1493CC/91cCID
  • Cutting and Welding Required During Installation
MG Midget 1976
  • 1.5L L4 1493CC/91cCID
  • Cutting and Welding Required During Installation
MG Midget 1977
  • 1.5L L4 1493CC/91cCID
  • Cutting and Welding Required During Installation
MG Midget 1978
  • 1.5L L4 1493CC/91cCID
  • Cutting and Welding Required During Installation
MG Midget 1979
  • 1.5L L4 1493CC/91cCID
  • Cutting and Welding Required During Installation
Mitsubishi Cordia 1983
  • Rear
  • 1.8L L4 1795CC
  • Cutting and Welding Required During Installation
Mitsubishi Cordia 1984
  • Rear
  • 2L L4 1997CC/122CID
  • 1.8L L4 1795CC
  • Cutting and Welding Required During Installation
Mitsubishi Cordia 1985
  • Rear
  • 2L L4 1997CC/122CID
  • 1.8L L4 1795CC
  • Cutting and Welding Required During Installation
Mitsubishi Cordia 1986
  • Rear
  • 2L L4 1997CC/122CID
  • 1.8L L4 1795CC
  • Cutting and Welding Required During Installation
Mitsubishi Cordia 1987
  • Rear
  • 2L L4 1997CC/122CID
  • 1.8L L4 1795CC
  • Cutting and Welding Required During Installation
Mitsubishi Cordia 1988
  • Rear
  • 2L L4 1997CC/122CID
  • 1.8L L4 1795CC
  • Cutting and Welding Required During Installation
Mitsubishi Galant 1988
  • Front
  • Rear
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Mitsubishi Mighty Max 1983
  • 2L L4 1997CC/122CID
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Mitsubishi Mighty Max 1984
  • 2L L4 1997CC/122CID
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Mitsubishi Mighty Max 1985
  • Rear
  • 2L L4 1997CC/122CID
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Mitsubishi Mighty Max 1986
  • Rear
  • 2L L4 1997CC/122CID
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Mitsubishi Mighty Max 1987
  • 2L L4 1997CC/122CID
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Mitsubishi Mighty Max 1988
  • 2L L4 1997CC/122CID
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Mitsubishi Mighty Max 1989
  • 2L L4 1997CC/122CID
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Mitsubishi Mighty Max 1990
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Mitsubishi Mighty Max 1991
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Mitsubishi Mighty Max 1992
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Mitsubishi Mighty Max 1993
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Mitsubishi Mighty Max 1994
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Mitsubishi Mirage 1985
  • Rear
  • 1.6L L4 1597CC/98cCID
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
Mitsubishi Mirage 1986
  • Rear
  • 1.6L L4 1597CC/98cCID
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
Mitsubishi Mirage 1987
  • 1.6L L4 1597CC/98cCID
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
Mitsubishi Mirage 1988
  • 1.6L L4 1597CC/98cCID
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
Mitsubishi Mirage 1989
  • 1.6L L4 1597CC/98cCID
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
Mitsubishi Mirage 1990
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
Mitsubishi Mirage 1991
  • 1.6L L4 1597CC/98cCID
  • Cutting and Welding Required During Installation
Mitsubishi Mirage 1992
  • 1.6L L4 1597CC/98cCID
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
Mitsubishi Montero 1987
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Mitsubishi Montero 1988
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Mitsubishi Montero 1989
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Mitsubishi Montero 1995
  • Front
  • 3L V6 2972CC/181CID
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Mitsubishi Precis 1987
  • Rear
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
Mitsubishi Precis 1988
  • Rear
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
Mitsubishi Precis 1989
  • Rear
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
Mitsubishi Precis 1990
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
Mitsubishi Precis 1991
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
Mitsubishi Precis 1992
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
Mitsubishi Precis 1993
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
Mitsubishi Precis 1994
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
Mitsubishi Sigma 1989
  • Front
  • Rear
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Mitsubishi Sigma 1990
  • Front
  • Rear
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Mitsubishi Tredia 1983
  • Rear
  • 1.8L L4 1795CC
  • Cutting and Welding Required During Installation
Mitsubishi Tredia 1984
  • Rear
  • 2L L4 1997CC/122CID
  • 1.8L L4 1795CC
  • Cutting and Welding Required During Installation
Mitsubishi Tredia 1985
  • Rear
  • 2L L4 1997CC/122CID
  • 1.8L L4 1795CC
  • Cutting and Welding Required During Installation
Mitsubishi Tredia 1986
  • Rear
  • 2L L4 1997CC/122CID
  • 1.8L L4 1795CC
  • Cutting and Welding Required During Installation
Mitsubishi Tredia 1987
  • Rear
  • 2L L4 1997CC/122CID
  • 1.8L L4 1795CC
  • Cutting and Welding Required During Installation
Mitsubishi Tredia 1988
  • Rear
  • 2L L4 1997CC/122CID
  • 1.8L L4 1795CC
  • Cutting and Welding Required During Installation
Mitsubishi Van 1987
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Mitsubishi Van 1988
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Mitsubishi Van 1989
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Mitsubishi Van 1990
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Nissan 200SX 1977
  • 2L L4 1952CC
  • Cutting and Welding Required During Installation
Nissan 200SX 1978
  • 2L L4 1952CC
  • Cutting and Welding Required During Installation
Nissan 200SX 1979
  • 2L L4 1952CC
  • Cutting and Welding Required During Installation
Nissan 200SX 1980
  • 2L L4 1952CC
  • Cutting and Welding Required During Installation
Nissan 200SX 1981
  • 2L L4 1952CC
  • Cutting and Welding Required During Installation
Nissan 200SX 1982
  • 2.2L L4 2187CC
  • Cutting and Welding Required During Installation
Nissan 200SX 1983
  • 2.2L L4 2187CC
  • Cutting and Welding Required During Installation
Nissan 200SX 1984
  • 1.8L L4 1809CC
  • 2L L4 1974CC
  • Cutting and Welding Required During Installation
Nissan 200SX 1985
  • 1.8L L4 1809CC
  • 2L L4 1974CC
  • Cutting and Welding Required During Installation
Nissan 280Z 1975
  • 2.8L L6 2753CC
  • Cutting and Welding Required During Installation
Nissan 280Z 1976
  • 2.8L L6 2753CC
  • Cutting and Welding Required During Installation
Nissan 280Z 1977
  • 2.8L L6 2753CC
  • Cutting and Welding Required During Installation
Nissan 280Z 1978
  • 2.8L L6 2753CC
  • Cutting and Welding Required During Installation
Nissan 280ZX 1979
  • 2.8L L6 2753CC
  • Cutting and Welding Required During Installation
Nissan 280ZX 1980
  • 2.8L L6 2753CC
  • Cutting and Welding Required During Installation
Nissan 280ZX 1981
  • 2.8L L6 2753CC
  • Cutting and Welding Required During Installation
Nissan 280ZX 1982
  • 2.8L L6 2753CC
  • Cutting and Welding Required During Installation
Nissan 280ZX 1983
  • 2.8L L6 2753CC
  • Cutting and Welding Required During Installation
Nissan 300ZX 1990
  • Left
  • Right
  • 2+2
  • Base
  • 3L V6 2960CC/181CID
  • Cutting and Welding Required During Installation
Nissan 300ZX 1991
  • Left
  • Right
  • 2+2
  • Base
  • 3L V6 2960CC/181CID
  • Cutting and Welding Required During Installation
Nissan 300ZX 1992
  • Left
  • Right
  • 2+2
  • Base
  • 3L V6 2960CC/181CID
  • Cutting and Welding Required During Installation
Nissan 300ZX 1993
  • Left
  • Right
  • 2+2
  • Base
  • 3L V6 2960CC/181CID
  • Cutting and Welding Required During Installation
Nissan 300ZX 1994
  • Left
  • Right
  • 2+2
  • Base
  • 3L V6 2960CC/181CID
  • Cutting and Welding Required During Installation
Nissan 300ZX 1995
  • Left
  • Right
  • 2+2
  • Base
  • 3L V6 2960CC/181CID
  • Cutting and Welding Required During Installation
Nissan 300ZX 1996
  • Left
  • Right
  • 2+2
  • Base
  • 3L V6 2960CC/181CID
  • Cutting and Welding Required During Installation
Nissan 210 1980
  • 1.4L L4 1393CC/85cCID
  • 1.5L L4 1488CC
  • 1.2L L4 1237CC
  • Cutting and Welding Required During Installation
Nissan 210 1981
  • 1.4L L4 1393CC/85cCID
  • 1.5L L4 1488CC
  • 1.2L L4 1237CC
  • Cutting and Welding Required During Installation
Nissan 210 1982
  • 1.4L L4 1393CC/85cCID
  • 1.5L L4 1488CC
  • 1.2L L4 1237CC
  • Cutting and Welding Required During Installation
Nissan 310 1979
  • 1.4L L4 1393CC/85cCID
  • Cutting and Welding Required During Installation
Nissan 310 1980
  • 1.4L L4 1393CC/85cCID
  • Cutting and Welding Required During Installation
Nissan 310 1981
  • 1.5L L4 1488CC
  • Cutting and Welding Required During Installation
Nissan 310 1982
  • 1.5L L4 1488CC
  • Cutting and Welding Required During Installation
Nissan 510 1978
  • 2L L4 1952CC
  • Cutting and Welding Required During Installation
Nissan 510 1979
  • 2L L4 1952CC
  • Cutting and Welding Required During Installation
Nissan 510 1980
  • 2L L4 1952CC
  • Cutting and Welding Required During Installation
Nissan 510 1981
  • 2L L4 1952CC
  • Cutting and Welding Required During Installation
Nissan 720 1983
  • 2L L4 1952CC
  • 2.4L L4 2389CC
  • Cutting and Welding Required During Installation
Nissan 720 1984
  • 2L L4 1952CC
  • 2.4L L4 2389CC
  • Cutting and Welding Required During Installation
Nissan 720 1985
  • 2L L4 1952CC
  • 2.4L L4 2389CC
  • Cutting and Welding Required During Installation
Nissan 720 1986
  • 2.4L L4 2389CC
  • Cutting and Welding Required During Installation
Nissan 810 1977
  • 2.4L L6 2393CC
  • Cutting and Welding Required During Installation
Nissan 810 1979
  • 2.4L L6 2393CC
  • Cutting and Welding Required During Installation
Nissan 810 1980
  • 2.4L L6 2393CC
  • Cutting and Welding Required During Installation
Nissan B210 1975
  • 1.4L L4 1393CC/85cCID
  • Cutting and Welding Required During Installation
Nissan B210 1976
  • 1.4L L4 1393CC/85cCID
  • Cutting and Welding Required During Installation
Nissan B210 1977
  • 1.4L L4 1393CC/85cCID
  • Cutting and Welding Required During Installation
Nissan B210 1978
  • 1.4L L4 1393CC/85cCID
  • Cutting and Welding Required During Installation
Nissan D21 1986
  • 2.4L L4 2389CC
  • without Air Tube
  • Cutting and Welding Required During Installation
Nissan D21 1990
  • 4WD
  • 2.4L L4 2389CC
  • 3L V6 2960CC/181CID
  • Cutting and Welding Required During Installation
Nissan D21 1991
  • 4WD
  • 2.4L L4 2389CC
  • 3L V6 2960CC/181CID
  • Cutting and Welding Required During Installation
Nissan D21 1992
  • 4WD
  • 2.4L L4 2389CC
  • 3L V6 2960CC/181CID
  • Cutting and Welding Required During Installation
Nissan D21 1993
  • 4WD
  • 2.4L L4 2389CC
  • 3L V6 2960CC/181CID
  • Cutting and Welding Required During Installation
Nissan D21 1994
  • 4WD
  • 2.4L L4 2389CC
  • 3L V6 2960CC/181CID
  • Cutting and Welding Required During Installation
Nissan Maxima 1982
  • 2.4L L6 2393CC
  • Cutting and Welding Required During Installation
Nissan Maxima 1983
  • 2.4L L6 2393CC
  • Cutting and Welding Required During Installation
Nissan Maxima 1984
  • 2.4L L6 2393CC
  • Cutting and Welding Required During Installation
Nissan Maxima 1985
  • Front
  • 3L V6 2960CC/181CID
  • Cutting and Welding Required During Installation
Nissan Maxima 1986
  • 3L V6 2960CC/181CID
  • Cutting and Welding Required During Installation
Nissan Maxima 1987
  • 3L V6 2960CC/181CID
  • Cutting and Welding Required During Installation
Nissan Maxima 1988
  • 3L V6 2960CC/181CID
  • Cutting and Welding Required During Installation
Nissan Maxima 1989
  • 3L V6 2960CC/181CID
  • Cutting and Welding Required During Installation
Nissan Maxima 1990
  • 3L V6 2960CC/181CID
  • Cutting and Welding Required During Installation
Nissan Maxima 1991
  • 3L V6 2960CC/181CID
  • Cutting and Welding Required During Installation
Nissan Maxima 1992
  • 3L V6 2960CC/181CID
  • Cutting and Welding Required During Installation
Nissan Maxima 1993
  • 3L V6 2960CC/181CID
  • Cutting and Welding Required During Installation
Nissan Maxima 1994
  • 3L V6 2960CC/181CID
  • Cutting and Welding Required During Installation
Nissan NX 1991
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Nissan NX 1992
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Nissan NX 1993
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Nissan Pathfinder 1990
  • 3L V6 2960CC/181CID
  • Cutting and Welding Required During Installation
Nissan Pathfinder 1991
  • 3L V6 2960CC/181CID
  • Cutting and Welding Required During Installation
Nissan Pathfinder 1992
  • 3L V6 2960CC/181CID
  • Cutting and Welding Required During Installation
Nissan Pathfinder 1993
  • 3L V6 2960CC/181CID
  • Cutting and Welding Required During Installation
Nissan Pathfinder 1994
  • 3L V6 2960CC/181CID
  • Cutting and Welding Required During Installation
Nissan Pathfinder 1995
  • 3L V6 2960CC/181CID
  • Cutting and Welding Required During Installation
Nissan Pickup 1995
  • 2.4L L4 2389CC
  • 3L V6 2960CC/181CID
  • Cutting and Welding Required During Installation
Nissan Pulsar NX 1983
  • 1.5L L4 1488CC
  • Cutting and Welding Required During Installation
Nissan Pulsar NX 1984
  • 1.5L L4 1488CC
  • Cutting and Welding Required During Installation
Nissan Pulsar NX 1987
  • 1.6L L4 1597CC/97cCID
  • Cutting and Welding Required During Installation
Nissan Pulsar NX 1988
  • 1.6L L4 1597CC/97cCID
  • 1.8L L4 1809CC
  • Cutting and Welding Required During Installation
Nissan Pulsar NX 1989
  • 1.8L L4 1809CC
  • 1.6L L4 1597CC/97cCID
  • Cutting and Welding Required During Installation
Nissan Pulsar NX 1990
  • XE
  • 1.6L L4 1597CC/97cCID
  • Cutting and Welding Required During Installation
Nissan Quest 1993
  • 3L V6 2960CC/181CID
  • Cutting and Welding Required During Installation
Nissan Quest 1994
  • Rear
  • 3L V6 2960CC/181CID
  • Cutting and Welding Required During Installation
Nissan Quest 1995
  • Rear
  • 3L V6 2960CC/181CID
  • Cutting and Welding Required During Installation
Nissan Stanza 1982
  • 2L L4 1974CC
  • Cutting and Welding Required During Installation
Nissan Stanza 1983
  • 2L L4 1974CC
  • Cutting and Welding Required During Installation
Nissan Stanza 1984
  • 2L L4 1974CC
  • Cutting and Welding Required During Installation
Nissan Stanza 1985
  • Sedan
  • 2L L4 1974CC
  • Cutting and Welding Required During Installation
Nissan Stanza 1986
  • Sedan
  • 2L L4 1974CC
  • Cutting and Welding Required During Installation
Peugeot 505 1980
  • 2L L4 1971CC
  • Cutting and Welding Required During Installation
Peugeot 505 1981
  • 2L L4 1971CC
  • Cutting and Welding Required During Installation
Peugeot 505 1982
  • 2L L4 1971CC
  • Cutting and Welding Required During Installation
Peugeot 505 1983
  • 2L L4 1971CC
  • Cutting and Welding Required During Installation
Peugeot 505 1984
  • 2L L4 1971CC
  • Cutting and Welding Required During Installation
Peugeot 505 1985
  • 2.2L L4 2155CC
  • Turbocharged
  • Cutting and Welding Required During Installation
  • USA
  • CAN
Peugeot 505 1986
  • 2.2L L4 2155CC
  • Cutting and Welding Required During Installation
Peugeot 505 1987
  • 2L L4 1971CC
  • 2.2L L4 2155CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Peugeot 505 1988
  • 2.2L L4 2155CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Peugeot 505 1989
  • 2.2L L4 2165CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Peugeot 505 1991
  • 2.2L L4 2155CC
  • 2.2L L4 2165CC
  • Cutting and Welding Required During Installation
Plymouth Arrow 1980
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Plymouth Arrow Pickup 1979
  • 2.6L L4 2555CC/156CID
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
Plymouth Arrow Pickup 1980
  • 2.6L L4 2555CC/156CID
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
Plymouth Arrow Pickup 1981
  • 2.6L L4 2555CC/156CID
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
Plymouth Arrow Pickup 1982
  • 2.6L L4 2555CC/156CID
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
Plymouth Champ 1979
  • 1.4L L4 1410CC
  • 1.6L L4 1597CC/98cCID
  • Cutting and Welding Required During Installation
Plymouth Champ 1980
  • 1.4L L4 1410CC
  • 1.6L L4 1597CC/98cCID
  • Cutting and Welding Required During Installation
Plymouth Champ 1982
  • Rear
  • 1.6L L4 1597CC/98cCID
  • 1.4L L4 1410CC
  • Cutting and Welding Required During Installation
Plymouth Colt 1976
  • 1.6L L4 1597CC/98cCID
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
  • CAN
Plymouth Colt 1977
  • 1.6L L4 1597CC/98cCID
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
  • CAN
Plymouth Colt 1978
  • 1.6L L4 1597CC/98cCID
  • 2L L4 1997CC/122CID
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
  • CAN
Plymouth Colt 1979
  • 1.6L L4 1597CC/98cCID
  • 2.6L L4 2555CC/156CID
  • 1.4L L4 1410CC
  • Cutting and Welding Required During Installation
  • CAN
Plymouth Colt 1980
  • 1.6L L4 1597CC/98cCID
  • 2.6L L4 2555CC/156CID
  • 1.4L L4 1410CC
  • Cutting and Welding Required During Installation
  • CAN
Plymouth Colt 1981
  • Rear
  • 1.6L L4 1597CC/98cCID
  • 1.4L L4 1410CC
  • Cutting and Welding Required During Installation
  • CAN
Plymouth Colt 1982
  • Rear
  • 1.6L L4 1597CC/98cCID
  • 1.4L L4 1410CC
  • Cutting and Welding Required During Installation
  • CAN
Plymouth Colt 1983
  • Rear
  • 1.6L L4 1597CC/98cCID
  • 1.4L L4 1410CC
  • Cutting and Welding Required During Installation
Plymouth Colt 1984
  • Right
  • Rear
  • 1.6L L4 1597CC/98cCID
  • 1.4L L4 1410CC
  • 2L L4 1997CC/122CID
  • Naturally Aspirated
  • Turbocharged
  • Cutting and Welding Required During Installation
Plymouth Colt 1985
  • Rear
  • 1.6L L4 1597CC/98cCID
  • 2L L4 1997CC/122CID
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
Plymouth Colt 1986
  • Rear
  • 1.6L L4 1597CC/98cCID
  • 2L L4 1997CC/122CID
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
  • Split Date To: To 12/1986
Plymouth Colt 1987
  • 1.6L L4 1597CC/98cCID
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
Plymouth Colt 1988
  • 1.6L L4 1597CC/98cCID
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
Plymouth Colt 1989
  • 1.6L L4 1597CC/98cCID
  • 1.8L L4 1754CC/107CID
  • Cutting and Welding Required During Installation
Plymouth Colt 1990
  • 1.6L L4 1597CC/98cCID
  • 1.8L L4 1754CC/107CID
  • Cutting and Welding Required During Installation
Plymouth Colt 1991
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
  • USA
  • CAN
Plymouth Colt 1992
  • 2.4L L4 2351CC
  • 1.8L L4 1834CC/112CID
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
  • USA
  • CAN
Plymouth Colt 1993
  • 2.4L L4 2351CC
  • 1.8L L4 1834CC/112CID
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
Plymouth Colt 1994
  • 2.4L L4 2351CC
  • 1.8L L4 1834CC/112CID
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
Plymouth Sapporo 1978
  • 1.6L L4 1597CC/98cCID
  • Cutting and Welding Required During Installation
Plymouth Sapporo 1979
  • 1.6L L4 1597CC/98cCID
  • Cutting and Welding Required During Installation
Plymouth Sapporo 1983
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Pontiac Fiero 1984
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Pontiac Fiero 1985
  • 2.5L L4 2474CC/151CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Pontiac Fiero 1986
  • 2.5L L4 2474CC/151CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Pontiac Fiero 1987
  • 2.5L L4 2474CC/151CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Pontiac Fiero 1988
  • 2.5L L4 2474CC/151CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Porsche 928 1990
  • Left
  • Right
  • 5L V8 4950CC
  • Cutting and Welding Required During Installation
Porsche 928 1991
  • Left
  • Right
  • 5L V8 4950CC
  • Cutting and Welding Required During Installation
Porsche 928 1993
  • Left
  • Right
  • 5.4L V8 5392CC
  • Cutting and Welding Required During Installation
Porsche 928 1994
  • Left
  • Right
  • 5.4L V8 5392CC
  • Cutting and Welding Required During Installation
Porsche 928 1995
  • Left
  • Right
  • 5.4L V8 5392CC
  • Cutting and Welding Required During Installation
Porsche 944 1983
  • 2.5L L4 2475CC
  • Cutting and Welding Required During Installation
Porsche 944 1984
  • 2.5L L4 2475CC
  • Cutting and Welding Required During Installation
Porsche 944 1985
  • 2.5L L4 2475CC
  • Cutting and Welding Required During Installation
Renault Fuego 1982
  • 1.6L L4 1647CC/100CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Renault Fuego 1983
  • 1.6L L4 1647CC/100CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Renault R18i 1981
  • 1.6L L4 1647CC/100CID
  • Cutting and Welding Required During Installation
Renault R18i 1982
  • 1.6L L4 1647CC/100CID
  • Cutting and Welding Required During Installation
Renault R18i 1983
  • 1.6L L4 1647CC/100CID
  • Cutting and Welding Required During Installation
Saab 99 1975
  • 2L L4 1985CC
  • Cutting and Welding Required During Installation
Saab 99 1976
  • 2L L4 1985CC
  • Cutting and Welding Required During Installation
Saab 99 1977
  • 2L L4 1985CC
  • Cutting and Welding Required During Installation
Saab 99 1978
  • 2L L4 1985CC
  • Cutting and Welding Required During Installation
Saab 99 1979
  • 2L L4 1985CC
  • Cutting and Welding Required During Installation
Saab 99 1980
  • 2L L4 1985CC
  • Cutting and Welding Required During Installation
Saab 900 1979
  • 2L L4 1985CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Saab 900 1980
  • 2L L4 1985CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Saab 900 1981
  • 2L L4 1985CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Saab 900 1982
  • 2L L4 1985CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Saab 900 1983
  • 2L L4 1985CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Saab 900 1984
  • 2L L4 1985CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Saab 900 1985
  • 2L L4 1985CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Saab 900 1986
  • 2L L4 1985CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Saab 900 1987
  • 2L L4 1985CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Saab 900 1988
  • 2L L4 1985CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Saab 900 1989
  • 2L L4 1985CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Saab 900 1990
  • 2L L4 1985CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Subaru Brat 1983
  • Front
  • 1.8L H4 1781CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Subaru Brat 1984
  • Front
  • 1.8L H4 1781CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Subaru GL-10 1985
  • Front
  • 1.8L H4 1781CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Subaru GL-10 1986
  • Front
  • 1.8L H4 1781CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Subaru GL-10 1987
  • Front
  • 1.8L H4 1781CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Subaru GL-10 1988
  • Front
  • 1.8L H4 1781CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Subaru GL-10 1989
  • Front
  • 1.8L H4 1781CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Subaru GL 1983
  • Front
  • 1.8L H4 1781CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Subaru GL 1984
  • Front
  • 1.8L H4 1781CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Subaru GL 1985
  • Front
  • 1.8L H4 1781CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Subaru GL 1986
  • Front
  • 1.8L H4 1781CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Subaru GL 1987
  • Front
  • 1.8L H4 1781CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Subaru GL 1988
  • Front
  • 1.8L H4 1781CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Subaru GL 1989
  • Front
  • 1.8L H4 1781CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Subaru Impreza 1995
  • Rear
  • 2.2L H4 2212CC
  • Cutting and Welding Required During Installation
Subaru RX 1986
  • Front
  • 1.8L H4 1781CC
  • Cutting and Welding Required During Installation
Subaru RX 1987
  • Front
  • 1.8L H4 1781CC
  • Cutting and Welding Required During Installation
Subaru RX 1988
  • Front
  • 1.8L H4 1781CC
  • Cutting and Welding Required During Installation
Subaru RX 1989
  • Front
  • 1.8L H4 1781CC
  • Cutting and Welding Required During Installation
Subaru XT 1986
  • Front
  • 1.8L H4 1781CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Subaru XT 1987
  • Front
  • 1.8L H4 1781CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Toyota 4Runner 1985
  • 2.4L L4 2366CC
  • Cutting and Welding Required During Installation
Toyota 4Runner 1986
  • DLX
  • SR5
  • 2.4L L4 2366CC
  • Cutting and Welding Required During Installation
Toyota 4Runner 1987
  • DLX
  • SR5
  • 2.4L L4 2366CC
  • Cutting and Welding Required During Installation
Toyota 4Runner 1988
  • 2.4L L4 2366CC
  • Cutting and Welding Required During Installation
Toyota 4Runner 1989
  • 2.4L L4 2366CC
  • Cutting and Welding Required During Installation
Toyota 4Runner 1990
  • 2.4L L4 2366CC
  • Cutting and Welding Required During Installation
Toyota 4Runner 1991
  • 2.4L L4 2366CC
  • Cutting and Welding Required During Installation
Toyota 4Runner 1992
  • 2.4L L4 2366CC
  • Cutting and Welding Required During Installation
Toyota 4Runner 1993
  • 2.4L L4 2366CC
  • Cutting and Welding Required During Installation
Toyota 4Runner 1994
  • 2.4L L4 2366CC
  • Cutting and Welding Required During Installation
Toyota 4Runner 1995
  • 2.4L L4 2366CC
  • Cutting and Welding Required During Installation
Toyota Camry 1983
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
Toyota Camry 1984
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
Toyota Camry 1985
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
Toyota Camry 1986
  • 2L L4 1997CC/122CID
  • 2L L4 1974CC
  • Cutting and Welding Required During Installation
Toyota Camry 1992
  • Rear
  • 2.2L L4 2164CC
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Toyota Camry 1993
  • Rear
  • 2.2L L4 2164CC
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Toyota Camry 1994
  • Rear
  • 2.2L L4 2164CC
  • Cutting and Welding Required During Installation
Toyota Camry 1995
  • Rear
  • 2.2L L4 2164CC
  • Cutting and Welding Required During Installation
Toyota Celica 1979
  • Rear
  • 2.6L L6 2563CC
  • Cutting and Welding Required During Installation
Toyota Celica 1980
  • Rear
  • 2.6L L6 2563CC
  • Cutting and Welding Required During Installation
Toyota Celica 1981
  • Rear
  • 2.8L L6 2759CC
  • Cutting and Welding Required During Installation
Toyota Celica 1990
  • 1.6L L4 1587CC
  • Cutting and Welding Required During Installation
Toyota Celica 1991
  • 1.6L L4 1587CC
  • Cutting and Welding Required During Installation
Toyota Celica 1992
  • 1.6L L4 1587CC
  • Cutting and Welding Required During Installation
Toyota Celica 1993
  • 1.6L L4 1587CC
  • Cutting and Welding Required During Installation
Toyota Corolla 1984
  • Base
  • DLX
  • LE
  • 1.6L L4 1587CC
  • Cutting and Welding Required During Installation
Toyota Corolla 1985
  • Sport GTS
  • 1.6L L4 1587CC
  • Cutting and Welding Required During Installation
Toyota Corolla 1986
  • Sport GTS
  • 1.6L L4 1587CC
  • Cutting and Welding Required During Installation
Toyota Corolla 1987
  • Sport GTS
  • FX16 GTS
  • FX16
  • 1.6L L4 1587CC
  • Cutting and Welding Required During Installation
Toyota Corolla 1988
  • FX16 GTS
  • GTS
  • 1.6L L4 1587CC
  • without Air Tube
  • Cutting and Welding Required During Installation
Toyota Corolla 1993
  • 1.6L L4 1587CC
  • 1.8L L4 1762CC
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
Toyota Corolla 1994
  • 1.6L L4 1587CC
  • 1.8L L4 1762CC
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
Toyota Corolla 1995
  • 1.6L L4 1587CC
  • 1.8L L4 1762CC
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
Toyota Cressida 1983
  • Wagon
  • 2.8L L6 2754CC
  • Cutting and Welding Required During Installation
Toyota Cressida 1984
  • Wagon
  • 2.8L L6 2754CC
  • Cutting and Welding Required During Installation
Toyota Cressida 1985
  • 2.8L L6 2754CC
  • Cutting and Welding Required During Installation
Toyota Cressida 1986
  • 2.8L L6 2754CC
  • Cutting and Welding Required During Installation
Toyota Cressida 1987
  • 2.8L L6 2754CC
  • Cutting and Welding Required During Installation
Toyota Cressida 1988
  • 2.8L L6 2754CC
  • Cutting and Welding Required During Installation
Toyota MR2 1985
  • 1.6L L4 1587CC
  • Cutting and Welding Required During Installation
Toyota MR2 1986
  • 1.6L L4 1587CC
  • Cutting and Welding Required During Installation
Toyota MR2 1987
  • 1.6L L4 1587CC
  • Cutting and Welding Required During Installation
Toyota MR2 1988
  • 1.6L L4 1587CC
  • Cutting and Welding Required During Installation
Toyota MR2 1989
  • 1.6L L4 1587CC
  • Cutting and Welding Required During Installation
Toyota Paseo 1992
  • 1.5L L4 1497CC
  • Cutting and Welding Required During Installation
Toyota Paseo 1993
  • 1.5L L4 1497CC
  • Cutting and Welding Required During Installation
Toyota Paseo 1994
  • 1.5L L4 1497CC
  • Cutting and Welding Required During Installation
Toyota Paseo 1995
  • 1.5L L4 1497CC
  • Cutting and Welding Required During Installation
Toyota Pickup 1984
  • 2.4L L4 2366CC
  • GAS
  • Cutting and Welding Required During Installation
Toyota Pickup 1985
  • 2.4L L4 2366CC
  • GAS
  • Cutting and Welding Required During Installation
Toyota Pickup 1986
  • 2.4L L4 2366CC
  • GAS
  • Cutting and Welding Required During Installation
Toyota Pickup 1987
  • 2.4L L4 2366CC
  • GAS
  • Cutting and Welding Required During Installation
Toyota Pickup 1988
  • 2.4L L4 2366CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Toyota Pickup 1989
  • 2.4L L4 2366CC
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
Toyota Pickup 1990
  • 2.4L L4 2366CC
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
Toyota Pickup 1994
  • 2.4L L4 2366CC
  • Cutting and Welding Required During Installation
Toyota Pickup 1995
  • 2.4L L4 2366CC
  • Cutting and Welding Required During Installation
Toyota Starlet 1981
  • 1.3L L4 1290CC
  • Cutting and Welding Required During Installation
Toyota Starlet 1982
  • 1.3L L4 1290CC
  • Cutting and Welding Required During Installation
Toyota Tacoma 1995
  • 2.4L L4 2438CC
  • Cutting and Welding Required During Installation
Toyota Tercel 1980
  • 1.5L L4 1452CC
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
Toyota Tercel 1981
  • 1.5L L4 1452CC
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
Toyota Tercel 1982
  • 1.5L L4 1452CC
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
Toyota Tercel 1991
  • 1.5L L4 1456CC
  • Cutting and Welding Required During Installation
Toyota Tercel 1992
  • 1.5L L4 1456CC
  • Cutting and Welding Required During Installation
Toyota Tercel 1993
  • 1.5L L4 1456CC
  • Cutting and Welding Required During Installation
Toyota Tercel 1994
  • 1.5L L4 1456CC
  • Cutting and Welding Required During Installation
Toyota Van 1984
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Toyota Van 1985
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Toyota Van 1986
  • 2.2L L4 2237CC
  • Cutting and Welding Required During Installation
Toyota Van 1987
  • 2.2L L4 2237CC
  • Cutting and Welding Required During Installation
Volkswagen Golf 1988
  • 1.8L L4 1781CC
  • PF
  • Cutting and Welding Required During Installation
Volkswagen Golf 1989
  • 1.8L L4 1781CC
  • PF
  • Cutting and Welding Required During Installation
Volkswagen Passat 1995
  • 2L L4 1984CC/121CID
  • Cutting and Welding Required During Installation
Volkswagen Rabbit 1977
  • 1.5L L4 1471CC
  • Cutting and Welding Required During Installation
Volkswagen Rabbit Convertible 1981
  • 1.7L L4 1715CC
  • Cutting and Welding Required During Installation
Volkswagen Rabbit Convertible 1982
  • 1.7L L4 1715CC
  • without Air Tube
  • Cutting and Welding Required During Installation
Volkswagen Vanagon 1980
  • 2L H4 1970CC
  • Cutting and Welding Required During Installation
Volkswagen Vanagon 1981
  • 2L H4 1970CC
  • Cutting and Welding Required During Installation
Volkswagen Vanagon 1982
  • 2L H4 1970CC
  • Cutting and Welding Required During Installation
Volkswagen Vanagon 1983
  • 2L H4 1970CC
  • Cutting and Welding Required During Installation
Volvo 164 1975
  • 3L L6 2980CC
  • Cutting and Welding Required During Installation
Volvo 240 1990
  • 2.3L L4 2316CC
  • with Exhaust Gas Recirculation (EGR)
  • Cutting and Welding Required During Installation
Volvo 240 1991
  • 2.3L L4 2316CC
  • with Exhaust Gas Recirculation (EGR)
  • Cutting and Welding Required During Installation
Volvo 240 1992
  • 2.3L L4 2316CC
  • with Exhaust Gas Recirculation (EGR)
  • Cutting and Welding Required During Installation
Volvo 240 1993
  • 2.3L L4 2316CC
  • with Exhaust Gas Recirculation (EGR)
  • Cutting and Welding Required During Installation
Volvo 242 1975
  • 2L L4 1990CC/121CID
  • Cutting and Welding Required During Installation
Volvo 242 1976
  • 2.1L L4 2127CC
  • Cutting and Welding Required During Installation
Volvo 242 1977
  • 2.1L L4 2127CC
  • Cutting and Welding Required During Installation
Volvo 242 1978
  • 2.1L L4 2127CC
  • Cutting and Welding Required During Installation
Volvo 242 1979
  • 2.1L L4 2127CC
  • Cutting and Welding Required During Installation
Volvo 242 1980
  • 2.1L L4 2127CC
  • Cutting and Welding Required During Installation
Volvo 242 1981
  • 2.1L L4 2127CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Volvo 242 1982
  • 2.1L L4 2127CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Volvo 242 1983
  • 2.3L L4 2316CC
  • Cutting and Welding Required During Installation
Volvo 244 1975
  • 2L L4 1990CC/121CID
  • Cutting and Welding Required During Installation
Volvo 244 1976
  • 2.1L L4 2127CC
  • Cutting and Welding Required During Installation
Volvo 244 1977
  • 2.1L L4 2127CC
  • Cutting and Welding Required During Installation
Volvo 244 1978
  • 2.1L L4 2127CC
  • Cutting and Welding Required During Installation
Volvo 244 1979
  • 2.1L L4 2127CC
  • Cutting and Welding Required During Installation
Volvo 244 1980
  • 2.1L L4 2127CC
  • Cutting and Welding Required During Installation
Volvo 244 1981
  • 2.1L L4 2127CC
  • Cutting and Welding Required During Installation
Volvo 244 1982
  • 2.1L L4 2127CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Volvo 244 1983
  • 2.3L L4 2316CC
  • Cutting and Welding Required During Installation
Volvo 244 1988
  • 2.3L L4 2316CC
  • with Exhaust Gas Recirculation (EGR)
  • Cutting and Welding Required During Installation
Volvo 244 1989
  • 2.3L L4 2316CC
  • with Exhaust Gas Recirculation (EGR)
  • Cutting and Welding Required During Installation
Volvo 245 1975
  • 2L L4 1990CC/121CID
  • Cutting and Welding Required During Installation
Volvo 245 1976
  • 2.1L L4 2127CC
  • Cutting and Welding Required During Installation
Volvo 245 1977
  • 2.1L L4 2127CC
  • Cutting and Welding Required During Installation
Volvo 245 1978
  • 2.1L L4 2127CC
  • Cutting and Welding Required During Installation
Volvo 245 1979
  • 2.1L L4 2127CC
  • Cutting and Welding Required During Installation
Volvo 245 1980
  • 2.1L L4 2127CC
  • Cutting and Welding Required During Installation
Volvo 245 1981
  • 2.1L L4 2127CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Volvo 245 1982
  • 2.1L L4 2127CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Volvo 245 1983
  • 2.3L L4 2316CC
  • Cutting and Welding Required During Installation
Volvo 245 1988
  • 2.3L L4 2316CC
  • with Exhaust Gas Recirculation (EGR)
  • Cutting and Welding Required During Installation
Volvo 245 1989
  • 2.3L L4 2316CC
  • with Exhaust Gas Recirculation (EGR)
  • Cutting and Welding Required During Installation
Volvo 262 1976
  • 2.7L V6 2673CC
  • Cutting and Welding Required During Installation
Volvo 262 1978
  • 2.7L V6 2673CC
  • Cutting and Welding Required During Installation
Volvo 262 1979
  • 2.7L V6 2673CC
  • Cutting and Welding Required During Installation
Volvo 262 1980
  • 2.8L V6 2849CC
  • Cutting and Welding Required During Installation
Volvo 262 1981
  • 2.8L V6 2849CC
  • Cutting and Welding Required During Installation
Volvo 264 1976
  • 2.7L V6 2673CC
  • Cutting and Welding Required During Installation
Volvo 264 1977
  • 2.7L V6 2673CC
  • Cutting and Welding Required During Installation
Volvo 264 1978
  • 2.7L V6 2673CC
  • Cutting and Welding Required During Installation
Volvo 264 1979
  • 2.7L V6 2673CC
  • Cutting and Welding Required During Installation
Volvo 264 1980
  • 2.8L V6 2849CC
  • Cutting and Welding Required During Installation
Volvo 264 1981
  • 2.8L V6 2849CC
  • Cutting and Welding Required During Installation
Volvo 264 1982
  • 2.8L V6 2849CC
  • Cutting and Welding Required During Installation
Volvo 265 1976
  • 2.7L V6 2673CC
  • Cutting and Welding Required During Installation
Volvo 265 1977
  • 2.7L V6 2673CC
  • Cutting and Welding Required During Installation
Volvo 265 1978
  • 2.7L V6 2673CC
  • Cutting and Welding Required During Installation
Volvo 265 1979
  • 2.7L V6 2673CC
  • Cutting and Welding Required During Installation
Volvo 265 1980
  • 2.8L V6 2849CC
  • Cutting and Welding Required During Installation
Volvo 265 1981
  • 2.8L V6 2849CC
  • Cutting and Welding Required During Installation