100% BASÉ AU CANADA 100% CANADIEN
SANS FRAIS DE COURTAGE EN DOUANE SANS FRAIS DE DOUANE
MARCHAND AUTORISÉ MARCHAND AUTORISÉ
30 JOURS – RETOURS SANS TRACAS 30 JOURS – RETOURS

MagnaFlowStainless Federal Catalytic Converter without Sensor Port (2" IN\/2" OUT)

DISTRIBUTEUR AUTORISÉ

53104

Numéro de Pièce du Fabricant
*Les images sont à titre illustratif seulement. Le produit réel peut varier.
SKU: MAG-53104
Sélectionnez un véhicule pour vérifier la compatibilité.

Sélectionnez un Véhicule

Cela servira à vous montrer les pièces compatibles.

Auto Parts Finder

Ce produit n'est pas compatible avec votre sélection!

Le produit affiché sur cette page n'est pas compatible avec vehicle

!
Afin d'assurer la bonne compatibilité des pièces, veuillez parcourir des produits compatibles ou changer votre sélection.


Changer la Sélection Actuelle
Livraison GRATUITE*
Garantie Standard

Commande Spéciale
1-3 Semaines
121,00 CA $
Stainless Federal Catalytic Converter without Sensor Port (2" IN\/2" OUT) doit être acheté par multiple de 1
DISTRIBUTEUR AUTORISÉ

53104

Numéro de Pièce du Fabricant
Plus d’information
Fabricant MagnaFlow
Numéro de Pièce du Fabricant 53104
Prix de Détail Suggéré du Fabricant (MSRP) 103,93
Rédigez votre propre commentaire
Seuls les utilisateurs sauvegardés peuvent soumettre leur avis. Veuillez vous connecter ou créer un compte
This table represents all the 148 compatible vehicles for this part:
MarqueModèleAnnée
Application Notes
PositionSubmodelTransmissionBody TypeDrive TypeEngineAdditional Information
Acura
EL1997
  • 1.6L L4 1590CC/97cCID
  • Cutting and Welding Required During Installation
  • CAN
Acura
EL1998
  • 1.6L L4 1590CC/97cCID
  • Cutting and Welding Required During Installation
  • CAN
Acura
NSX1991
  • Right
  • Left
  • 3L V6 2977CC
  • Cutting and Welding Required During Installation
Acura
NSX1992
  • Right
  • Left
  • 3L V6 2977CC
  • Cutting and Welding Required During Installation
Acura
NSX1993
  • Right
  • Left
  • 3L V6 2977CC
  • Cutting and Welding Required During Installation
Acura
NSX1994
  • Right
  • Left
  • 3L V6 2977CC
  • Cutting and Welding Required During Installation
Audi
Fox1975
  • 1.6L L4 1588CC/97cCID
  • Cutting and Welding Required During Installation
Audi
Fox1976
  • 1.6L L4 1588CC/97cCID
  • Cutting and Welding Required During Installation
Audi
Fox1977
  • 1.6L L4 1588CC/97cCID
  • Cutting and Welding Required During Installation
Audi
Fox1978
  • 1.6L L4 1588CC/97cCID
  • Cutting and Welding Required During Installation
Audi
Fox1979
  • 1.6L L4 1588CC/97cCID
  • Cutting and Welding Required During Installation
Dodge
Dakota1987
  • 3.9L V6 3906CC/239CID
  • Pre-Converter
  • Cutting and Welding Required During Installation
Dodge
Dakota1988
  • 3.9L V6 3906CC/239CID
  • Pre-Converter
  • Cutting and Welding Required During Installation
Dodge
Dakota1989
  • 3.9L V6 3906CC/239CID
  • Pre-Converter
  • Cutting and Welding Required During Installation
Ford
Focus2011
  • Rear
  • 2L L4 1999CC/122CID
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Partial Zero Emissions Vehicles (PZEV)
  • Cutting and Welding Required During Installation
Ford
Mustang1987
  • Front
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Ford
Mustang1988
  • Front
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Ford
Mustang1989
  • Front
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Ford
Mustang1990
  • Front
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Ford
Mustang1991
  • Front
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Ford
Mustang1992
  • Front
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Ford
Mustang1993
  • Front
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Ford
Taurus1988
  • Front
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Ford
Taurus1989
  • Front Right
  • Front Left
  • SHO
  • 3.8L V6 232CID
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Ford
Taurus1990
  • Front Right
  • Front Left
  • SHO
  • 3.8L V6 232CID
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Ford
Taurus1991
  • SHO
  • 3.8L V6 232CID
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Ford
Taurus1992
  • SHO
  • 3.8L V6 232CID
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Ford
Taurus1993
  • Right
  • Left
  • SHO
  • 3.2L V6 195CID
  • 3.8L V6 232CID
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Ford
Taurus1994
  • Right
  • Left
  • 3.2L V6 195CID
  • 3.8L V6 232CID
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Ford
Taurus1995
  • Right
  • Left
  • SE
  • GL
  • SHO
  • LX
  • 3.2L V6 195CID
  • 3.8L V6 232CID
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Ford
Thunderbird1984
  • Front Right
  • Front Left
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Ford
Thunderbird1985
  • Front Right
  • Front Left
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Ford
Thunderbird1986
  • Front Right
  • Front Left
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Ford
Thunderbird1987
  • Front Right
  • Front Left
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Ford
Thunderbird1988
  • Front Right
  • Front Left
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Geo
Prizm1993
  • Rear
  • 1.8L L4 1762CC
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Geo
Prizm1994
  • Rear
  • 1.8L L4 1762CC
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Geo
Prizm1995
  • Rear
  • 1.8L L4 1762CC
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Honda
Passport1994
  • Front
  • Automatic
  • 3.2L V6 3165CC
  • Cutting and Welding Required During Installation
Honda
Passport1995
  • Front
  • Automatic
  • 3.2L V6 3165CC
  • Cutting and Welding Required During Installation
Isuzu
Rodeo1994
  • Front
  • Automatic
  • 3.2L V6 3165CC
  • Cutting and Welding Required During Installation
Isuzu
Rodeo1995
  • Front
  • Automatic
  • 3.2L V6 3165CC
  • Cutting and Welding Required During Installation
Lincoln
Continental1986
  • Front Left
  • Front Right
  • 5L V8 302CID
  • Dual Exhaust
  • Cutting and Welding Required During Installation
Lincoln
Continental1987
  • Front Left
  • Front Right
  • 5L V8 302CID
  • Dual Exhaust
  • Cutting and Welding Required During Installation
Lincoln
Continental1988
  • Right
  • Left
  • Front Left
  • Front Right
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
  • Split Date To: To 11/1989
Lincoln
Continental1989
  • Right
  • Left
  • Front Left
  • Front Right
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
  • Split Date To: To 11/1989
Lincoln
Continental1990
  • Left
  • Right
  • Front Left
  • Front Right
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
  • Split Date From: From 11/1989
  • Split Date To: To 11/1989
Lincoln
Continental1991
  • Left
  • Right
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Lincoln
Continental1992
  • Left
  • Right
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Lincoln
Continental1993
  • Left
  • Right
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Lincoln
Continental1994
  • Left
  • Right
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Lincoln
Mark VIII1993
  • Front Left
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Lincoln
Mark VIII1994
  • Front Left
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Lincoln
Mark VIII1995
  • Front Left
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Mazda
GLC1981
  • 1.5L L4 1490CC
  • Cutting and Welding Required During Installation
Mazda
GLC1982
  • 1.5L L4 1490CC
  • Cutting and Welding Required During Installation
Mazda
GLC1983
  • Rear
  • Hatchback
  • Sedan
  • Wagon
  • 1.5L L4 1490CC
  • Cutting and Welding Required During Installation
Mazda
GLC1984
  • Rear
  • 1.5L L4 1490CC
  • Cutting and Welding Required During Installation
Mazda
GLC1985
  • Rear
  • 1.5L L4 1490CC
  • Cutting and Welding Required During Installation
Mercury
Cougar1984
  • Front
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Mercury
Cougar1985
  • Front
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Mercury
Cougar1986
  • Front
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Mercury
Cougar1987
  • Front
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Mercury
Cougar1988
  • Front
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Mercury
Sable1988
  • Front
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Mercury
Sable1989
  • Front Right
  • Front Left
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Mercury
Sable1990
  • Front Right
  • Front Left
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Mercury
Sable1991
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Mercury
Sable1992
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Mercury
Sable1993
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Mercury
Sable1994
  • 3.8L V6 232CID
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Mercury
Sable1995
  • 3.8L V6 232CID
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Merkur
Scorpio1988
  • Front
  • Rear
  • 2.9L V6 177CID
  • Cutting and Welding Required During Installation
Merkur
Scorpio1989
  • Front
  • Rear
  • 2.9L V6 177CID
  • Cutting and Welding Required During Installation
MG
MGB1975
  • 1.8L L4 1798CC/110CID
  • Cutting and Welding Required During Installation
MG
MGB1976
  • 1.8L L4 1798CC/110CID
  • Cutting and Welding Required During Installation
MG
MGB1977
  • 1.8L L4 1798CC/110CID
  • Cutting and Welding Required During Installation
MG
MGB1978
  • 1.8L L4 1798CC/110CID
  • Cutting and Welding Required During Installation
MG
MGB1979
  • 1.8L L4 1798CC/110CID
  • Cutting and Welding Required During Installation
MG
MGB1980
  • 1.8L L4 1798CC/110CID
  • Cutting and Welding Required During Installation
Nissan
Sentra2003
  • Rear
  • 1.8L L4 1769CC
  • Cutting and Welding Required During Installation
Nissan
Sentra2004
  • Rear
  • 1.8L L4 1769CC
  • Cutting and Welding Required During Installation
Nissan
Sentra2005
  • Rear
  • 1.8L L4 1769CC
  • Cutting and Welding Required During Installation
Nissan
Sentra2006
  • Rear
  • 1.8L L4 1769CC
  • Cutting and Welding Required During Installation
Pontiac
Grand LeMans1983
  • 3.8L V6 231CID
  • Cutting and Welding Required During Installation
  • CAN
Porsche
9241977
  • 2L L4 1983CC
  • Cutting and Welding Required During Installation
Porsche
9241978
  • 2L L4 1983CC
  • Cutting and Welding Required During Installation
Porsche
9241979
  • 2L L4 1983CC
  • Cutting and Welding Required During Installation
Saab
90001989
  • 2L L4 1985CC
  • Cutting and Welding Required During Installation
  • CAN
Toyota
Celica1994
  • Rear
  • ST
  • 1.8L L4 1762CC
  • Cutting and Welding Required During Installation
Toyota
Celica1995
  • Rear
  • ST
  • 1.8L L4 1762CC
  • Cutting and Welding Required During Installation
Toyota
Corolla1993
  • Rear
  • 1.6L L4 1587CC
  • 1.8L L4 1762CC
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Toyota
Corolla1994
  • Rear
  • 1.6L L4 1587CC
  • 1.8L L4 1762CC
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Toyota
Corolla1995
  • Rear
  • 1.6L L4 1587CC
  • 1.8L L4 1762CC
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Toyota
Matrix2003
  • Rear
  • XRS
  • XR
  • Base
  • FWD
  • 1.8L L4 1795CC
  • 1.8L L4 1794CC
  • Cutting and Welding Required During Installation
Toyota
Matrix2004
  • Rear
  • XR
  • Base
  • FWD
  • 1.8L L4 1794CC
  • Cutting and Welding Required During Installation
Toyota
Matrix2005
  • Rear
  • XR
  • Base
  • FWD
  • 1.8L L4 1794CC
  • Cutting and Welding Required During Installation
Toyota
Matrix2006
  • Rear
  • Base
  • XR
  • FWD
  • 1.8L L4 1794CC
  • Cutting and Welding Required During Installation
Toyota
Matrix2007
  • Rear
  • 1.8L L4 1794CC
  • Cutting and Welding Required During Installation
Toyota
Matrix2008
  • Rear
  • 1.8L L4 1794CC
  • Cutting and Welding Required During Installation
Volkswagen
Beetle1975
  • 1.6L H4 1584CC/97cCID
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Volkswagen
Beetle1976
  • 1.6L H4 1584CC/97cCID
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Volkswagen
Beetle1977
  • 1.6L H4 1584CC/97cCID
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Volkswagen
Beetle1978
  • 1.6L H4 1584CC/97cCID
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Volkswagen
Beetle1979
  • 1.6L H4 1584CC/97cCID
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Volkswagen
Dasher1975
  • 1.5L L4 1471CC
  • Cutting and Welding Required During Installation
Volkswagen
Dasher1976
  • 1.6L L4 1588CC/97cCID
  • Cutting and Welding Required During Installation
Volkswagen
Dasher1977
  • 1.6L L4 1588CC/97cCID
  • Cutting and Welding Required During Installation
Volkswagen
Dasher1978
  • 1.6L L4 1588CC/97cCID
  • Cutting and Welding Required During Installation
Volkswagen
Dasher1979
  • 1.6L L4 1588CC/97cCID
  • Cutting and Welding Required During Installation
Volkswagen
Dasher1980
  • 1.6L L4 1588CC/97cCID
  • Cutting and Welding Required During Installation
Volkswagen
Dasher1981
  • 1.6L L4 1588CC/97cCID
  • Cutting and Welding Required During Installation
Volkswagen
Jetta1980
  • 1.6L L4 1588CC/97cCID
  • Cutting and Welding Required During Installation
Volkswagen
Jetta1981
  • 1.7L L4 1715CC
  • Cutting and Welding Required During Installation
Volkswagen
Jetta1982
  • 1.7L L4 1715CC
  • Cutting and Welding Required During Installation
  • USA
Volkswagen
Jetta1983
  • 1.7L L4 1715CC
  • Cutting and Welding Required During Installation
Volkswagen
Jetta1984
  • 1.7L L4 1715CC
  • 1.8L L4 1781CC
  • Cutting and Welding Required During Installation
Volkswagen
Quantum1982
  • 1.7L L4 1715CC
  • Cutting and Welding Required During Installation
Volkswagen
Quantum1983
  • 2.2L L5 2144CC
  • 1.7L L4 1715CC
  • Cutting and Welding Required During Installation
Volkswagen
Quantum1984
  • 2.2L L5 2144CC
  • Cutting and Welding Required During Installation
Volkswagen
Quantum1985
  • 1.8L L4 1781CC
  • 2.2L L5 2226CC
  • Cutting and Welding Required During Installation
Volkswagen
Rabbit1975
  • 1.5L L4 1471CC
  • Cutting and Welding Required During Installation
Volkswagen
Rabbit1976
  • 1.6L L4 1588CC/97cCID
  • Cutting and Welding Required During Installation
Volkswagen
Rabbit1977
  • 1.6L L4 1588CC/97cCID
  • Cutting and Welding Required During Installation
Volkswagen
Rabbit1978
  • 1.5L L4 1457CC
  • GAS
  • Cutting and Welding Required During Installation
Volkswagen
Rabbit1979
  • 1.5L L4 1457CC
  • GAS
  • Cutting and Welding Required During Installation
Volkswagen
Rabbit1980
  • 1.6L L4 1588CC/97cCID
  • 1.5L L4 1457CC
  • Cutting and Welding Required During Installation
Volkswagen
Rabbit1981
  • 1.7L L4 1715CC
  • Cutting and Welding Required During Installation
Volkswagen
Rabbit1982
  • 1.7L L4 1715CC
  • FI
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Volkswagen
Rabbit1983
  • 1.7L L4 1715CC
  • 1.8L L4 1781CC
  • FI
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Volkswagen
Rabbit1984
  • 1.7L L4 1715CC
  • 1.8L L4 1781CC
  • FI
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Volkswagen
Rabbit Pickup1980
  • 1.6L L4 1588CC/97cCID
  • 1.5L L4 1457CC
  • Cutting and Welding Required During Installation
Volkswagen
Rabbit Pickup1981
  • 1.7L L4 1715CC
  • Cutting and Welding Required During Installation
Volkswagen
Rabbit Pickup1982
  • 1.7L L4 1715CC
  • Cutting and Welding Required During Installation
Volkswagen
Rabbit Pickup1983
  • 1.7L L4 1715CC
  • Cutting and Welding Required During Installation
Volkswagen
Scirocco1975
  • 1.5L L4 1471CC
  • Cutting and Welding Required During Installation
Volkswagen
Scirocco1976
  • 1.6L L4 1588CC/97cCID
  • Cutting and Welding Required During Installation
Volkswagen
Scirocco1977
  • 1.6L L4 1588CC/97cCID
  • Cutting and Welding Required During Installation
Volkswagen
Scirocco1978
  • 1.5L L4 1457CC
  • Cutting and Welding Required During Installation
Volkswagen
Scirocco1979
  • 1.6L L4 1588CC/97cCID
  • Cutting and Welding Required During Installation
Volkswagen
Scirocco1980
  • 1.6L L4 1588CC/97cCID
  • Cutting and Welding Required During Installation
Volkswagen
Scirocco1981
  • 1.7L L4 1715CC
  • Cutting and Welding Required During Installation
Volkswagen
Scirocco1982
  • 1.7L L4 1715CC
  • Cutting and Welding Required During Installation
Volkswagen
Scirocco1983
  • 1.7L L4 1715CC
  • Cutting and Welding Required During Installation
Volvo
7601983
  • 2.8L V6 2849CC
  • Cutting and Welding Required During Installation
Volvo
7601984
  • 2.8L V6 2849CC
  • Cutting and Welding Required During Installation
Volvo
7601985
  • 2.8L V6 2849CC
  • Cutting and Welding Required During Installation
Volvo
7601986
  • 2.8L V6 2849CC
  • Cutting and Welding Required During Installation