100% BASÉ AU CANADA 100% CANADIEN
SANS FRAIS DE COURTAGE EN DOUANE SANS FRAIS DE DOUANE
MARCHAND AUTORISÉ MARCHAND AUTORISÉ
30 JOURS – RETOURS SANS TRACAS 30 JOURS – RETOURS

MagnaFlowStainless Federal Catalytic Converter without Sensor Port (2" IN\/2" OUT)

DISTRIBUTEUR AUTORISÉ

91004

Numéro de Pièce du Fabricant
*Les images sont à titre illustratif seulement. Le produit réel peut varier.
SKU: MAG-91004
Sélectionnez un véhicule pour vérifier la compatibilité.

Sélectionnez un Véhicule

Cela servira à vous montrer les pièces compatibles.

Auto Parts Finder

Ce produit n'est pas compatible avec votre sélection!

Le produit affiché sur cette page n'est pas compatible avec vehicle

!
Afin d'assurer la bonne compatibilité des pièces, veuillez parcourir des produits compatibles ou changer votre sélection.


Changer la Sélection Actuelle
Livraison GRATUITE*
Garantie Standard

Commande Spéciale
1-3 Semaines
137,00 CA $
Stainless Federal Catalytic Converter without Sensor Port (2" IN\/2" OUT) doit être acheté par multiple de 1
DISTRIBUTEUR AUTORISÉ

91004

Numéro de Pièce du Fabricant
Plus d’information
Fabricant MagnaFlow
Numéro de Pièce du Fabricant 91004
Prix de Détail Suggéré du Fabricant (MSRP) 105,52
Rédigez votre propre commentaire
Seuls les utilisateurs sauvegardés peuvent soumettre leur avis. Veuillez vous connecter ou créer un compte
This table represents all the 717 compatible vehicles for this part:
Marque Modèle Année
Application Notes
Position Submodel Transmission Body Type Drive Type Engine Aspiration Additional Information
Alfa Romeo Spider 1982
  • 2L L4 1961CC/120CID
  • Cutting and Welding Required During Installation
Alfa Romeo Spider 1983
  • 2L L4 1961CC/120CID
  • Cutting and Welding Required During Installation
Alfa Romeo Spider 1984
  • 2L L4 1961CC/120CID
  • Cutting and Welding Required During Installation
Alfa Romeo Spider 1985
  • 2L L4 1961CC/120CID
  • Cutting and Welding Required During Installation
Alfa Romeo Spider 1986
  • 2L L4 1961CC/120CID
  • Cutting and Welding Required During Installation
Alfa Romeo Spider 1987
  • 2L L4 1961CC/120CID
  • Cutting and Welding Required During Installation
Alfa Romeo Spider 1988
  • 2L L4 1961CC/120CID
  • Cutting and Welding Required During Installation
Alfa Romeo Spider 1989
  • 2L L4 1961CC/120CID
  • Cutting and Welding Required During Installation
American Motors Concord 1978
  • 3.8L L6 232CID
  • 4.2L L6 258CID
  • 5L V8 304CID
  • Cutting and Welding Required During Installation
  • with Single Exhaust
American Motors Concord 1979
  • 2L L4 121CID
  • 3.8L L6 232CID
  • 4.2L L6 258CID
  • 5L V8 304CID
  • Cutting and Welding Required During Installation
  • with Single Exhaust
American Motors Eagle 1980
  • Limited
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
American Motors Pacer 1977
  • 3.8L L6 232CID
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
Buick Century 1982
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Buick Century 1983
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Buick Century 1984
  • Coupe
  • Sedan
  • Wagon
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Buick Century 1985
  • Coupe
  • Sedan
  • Wagon
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Buick Century 1986
  • 2.5L L4 2474CC/151CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Buick Century 1987
  • 2.5L L4 2474CC/151CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Buick Century 1988
  • 2.5L L4 2474CC/151CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Buick Century 1989
  • 2.5L L4 2474CC/151CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Buick Century 1990
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Buick Century 1991
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Buick Century 1992
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Buick Century 1993
  • 2.2L L4 2190CC/134CID
  • Cutting and Welding Required During Installation
Buick Century 1994
  • 2.2L L4 2190CC/134CID
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Buick Century 1995
  • 2.2L L4 2190CC/134CID
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Buick Electra 1985
  • 3.8L V6 3800CC/231CID
  • 3L V6 181CID
  • Cutting and Welding Required During Installation
Buick Regal 1988
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Buick Regal 1989
  • 3.1L V6 189CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Buick Regal 1990
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Buick Regal 1991
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Buick Regal 1992
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Buick Regal 1993
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Buick Regal 1994
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Buick Regal 1995
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Buick Skyhawk 1984
  • 1.8L L4 112CID
  • Turbocharged
  • Cutting and Welding Required During Installation
  • without Air Tube
Buick Skyhawk 1985
  • 1.8L L4 112CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Buick Skyhawk 1986
  • 1.8L L4 112CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Buick Skyhawk 1987
  • 2L L4 122CID
  • 1
  • Cutting and Welding Required During Installation
  • K
Buick Skyhawk 1988
  • 2L L4 122CID
  • 1
  • Cutting and Welding Required During Installation
  • K
Buick Skyhawk 1989
  • 2L L4 122CID
  • Cutting and Welding Required During Installation
Buick Skylark 1982
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Buick Skylark 1983
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Buick Skylark 1984
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Buick Skylark 1985
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Buick Skylark 1986
  • 2.5L L4 2474CC/151CID
  • 3L V6 181CID
  • Cutting and Welding Required During Installation
Buick Skylark 1987
  • 2.5L L4 2474CC/151CID
  • 3L V6 181CID
  • Cutting and Welding Required During Installation
Buick Skylark 1988
  • 2.5L L4 2474CC/151CID
  • 3L V6 181CID
  • Cutting and Welding Required During Installation
Buick Skylark 1989
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Buick Skylark 1990
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Buick Skylark 1991
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Buick Skylark 1993
  • 2.3L L4 138CID
  • Cutting and Welding Required During Installation
Buick Skylark 1994
  • 3.1L V6 189CID
  • 2.3L L4 138CID
  • Cutting and Welding Required During Installation
Buick Skylark 1995
  • 3.1L V6 189CID
  • 2.3L L4 138CID
  • Cutting and Welding Required During Installation
Buick Somerset 1986
  • 2.5L L4 2474CC/151CID
  • 3L V6 181CID
  • Cutting and Welding Required During Installation
Buick Somerset 1987
  • 2.5L L4 2474CC/151CID
  • 3L V6 181CID
  • Cutting and Welding Required During Installation
Buick Somerset Regal 1985
  • 2.5L L4 2474CC/151CID
  • 3L V6 181CID
  • Cutting and Welding Required During Installation
Cadillac Cimarron 1987
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Cadillac Cimarron 1988
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet Beretta 1987
  • 2L L4 122CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet Beretta 1988
  • 2L L4 122CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet Beretta 1989
  • 2L L4 122CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet Beretta 1990
  • 3.1L V6 189CID
  • 2.2L L4 134CID
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Chevrolet Beretta 1991
  • 3.1L V6 189CID
  • 2.2L L4 134CID
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Chevrolet Beretta 1992
  • 2.2L L4 2190CC/134CID
  • 3.1L V6 189CID
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Chevrolet Beretta 1993
  • 2.2L L4 2190CC/134CID
  • 3.1L V6 189CID
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Chevrolet Beretta 1994
  • 2.2L L4 2190CC/134CID
  • 3.1L V6 189CID
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Chevrolet Beretta 1995
  • 2.2L L4 2190CC/134CID
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Chevrolet Camaro 1982
  • 2.5L L4 2474CC/151CID
  • without Air Tube
  • Cutting and Welding Required During Installation
Chevrolet Camaro 1983
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Chevrolet Camaro 1984
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Chevrolet Camaro 1985
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Chevrolet Camaro 1986
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Chevrolet Cavalier 1985
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet Cavalier 1986
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet Cavalier 1987
  • 2L L4 122CID
  • Cutting and Welding Required During Installation
Chevrolet Cavalier 1988
  • 2L L4 122CID
  • Cutting and Welding Required During Installation
Chevrolet Cavalier 1989
  • 2L L4 122CID
  • Cutting and Welding Required During Installation
Chevrolet Cavalier 1990
  • 2.2L L4 134CID
  • Cutting and Welding Required During Installation
Chevrolet Cavalier 1991
  • 3.1L V6 189CID
  • 2.2L L4 134CID
  • Cutting and Welding Required During Installation
Chevrolet Cavalier 1992
  • 2.2L L4 2190CC/134CID
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Chevrolet Cavalier 1993
  • 2.2L L4 2190CC/134CID
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Chevrolet Cavalier 1994
  • 2.2L L4 2190CC/134CID
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Chevrolet Cavalier 1995
  • 2.2L L4 2190CC/134CID
  • 2.3L L4 138CID
  • Cutting and Welding Required During Installation
Chevrolet Celebrity 1982
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Chevrolet Celebrity 1983
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Chevrolet Celebrity 1984
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Chevrolet Celebrity 1985
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Chevrolet Celebrity 1986
  • 2.5L L4 2474CC/151CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
  • W
  • FI
Chevrolet Celebrity 1987
  • 2.5L L4 2474CC/151CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet Celebrity 1988
  • 2.5L L4 2474CC/151CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet Celebrity 1989
  • 2.5L L4 2474CC/151CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet Celebrity 1990
  • 2.5L L4 2474CC/151CID
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Chevrolet Corsica 1987
  • 2L L4 122CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet Corsica 1988
  • 2L L4 122CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet Corsica 1989
  • 2L L4 122CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet Corsica 1990
  • 3.1L V6 189CID
  • 2.2L L4 134CID
  • Cutting and Welding Required During Installation
Chevrolet Corsica 1991
  • 3.1L V6 189CID
  • 2.2L L4 134CID
  • Cutting and Welding Required During Installation
Chevrolet Corsica 1992
  • 2.2L L4 2190CC/134CID
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Chevrolet Corsica 1993
  • 2.2L L4 2190CC/134CID
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Chevrolet Corsica 1994
  • 2.2L L4 2190CC/134CID
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Chevrolet Corsica 1995
  • 2.2L L4 2190CC/134CID
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Chevrolet Lumina 1990
  • 2.5L L4 2474CC/151CID
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Chevrolet Lumina 1991
  • 2.5L L4 2474CC/151CID
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Chevrolet Lumina 1992
  • 2.5L L4 2474CC/151CID
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Chevrolet Lumina 1993
  • 3.1L V6 189CID
  • 2.2L L4 2190CC/134CID
  • Cutting and Welding Required During Installation
Chevrolet Lumina 1994
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Chevrolet Lumina 1995
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Chevrolet Monte Carlo 1995
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Chevrolet S10 1994
  • 2.2L L4 2190CC/134CID
  • Cutting and Welding Required During Installation
Chevrolet S10 1995
  • 2.2L L4 2190CC/134CID
  • Cutting and Welding Required During Installation
Chevrolet Sprint 1985
  • 1L L3 993CC/61cCID
  • Cutting and Welding Required During Installation
Chevrolet Sprint 1986
  • 1L L3 993CC/61cCID
  • Cutting and Welding Required During Installation
Chevrolet Sprint 1987
  • 1L L3 993CC/61cCID
  • Cutting and Welding Required During Installation
Chevrolet Sprint 1988
  • 1L L3 993CC/61cCID
  • Cutting and Welding Required During Installation
Chevrolet Sprint 1989
  • 1L L3 993CC/61cCID
  • Cutting and Welding Required During Installation
  • CAN
Chevrolet Sprint 1990
  • 1L L3 993CC/61cCID
  • Cutting and Welding Required During Installation
  • CAN
Chevrolet Sprint 1991
  • 1L L3 993CC/61cCID
  • Turbocharged
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
  • CAN
  • with Sway Bar
Chevrolet Vega 1975
  • 2L L4 122CID
  • Cutting and Welding Required During Installation
Chrysler Conquest 1987
  • Rear
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Chrysler Conquest 1988
  • Rear
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Chrysler Conquest 1989
  • Rear
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Chrysler Cordoba 1981
  • 3.7L L6 3687CC/225CID
  • without Air Tube
  • Cutting and Welding Required During Installation
Chrysler Cordoba 1983
  • 3.7L L6 3687CC/225CID
  • without Air Tube
  • Cutting and Welding Required During Installation
Chrysler Dynasty 1988
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
  • CAN
Chrysler Dynasty 1989
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
  • CAN
Chrysler Dynasty 1990
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
  • CAN
Chrysler Dynasty 1991
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
  • CAN
Chrysler Fifth Avenue 1983
  • 3.7L L6 3687CC/225CID
  • without Air Tube
  • Cutting and Welding Required During Installation
Chrysler LeBaron 1981
  • Coupe
  • Wagon
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
  • CAN
Chrysler LeBaron 1984
  • Rear
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Chrysler LeBaron 1985
  • Rear
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Chrysler LeBaron 1986
  • Rear
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Chrysler New Yorker 1982
  • 3.7L L6 3687CC/225CID
  • without Air Tube
  • Cutting and Welding Required During Installation
Chrysler New Yorker 1985
  • Rear
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Chrysler New Yorker 1986
  • Rear
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Chrysler TC Maserati 1989
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Chrysler TC Maserati 1990
  • 3L V6 2972CC/181CID
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Chrysler TC Maserati 1991
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Daihatsu Rocky 1990
  • 1.6L L4 1589CC
  • Cutting and Welding Required During Installation
Daihatsu Rocky 1991
  • 1.6L L4 1589CC
  • Cutting and Welding Required During Installation
Daihatsu Rocky 1992
  • 1.6L L4 1589CC
  • Cutting and Welding Required During Installation
Dodge 2000 GTX 1989
  • 2L L4 1997CC/122CID
  • V
  • SOHC
  • CAN
  • Cutting and Welding Required During Installation
Dodge 600 1984
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge 600 1985
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge Aries 1985
  • 2.2L L4 135CID
  • D
  • Cutting and Welding Required During Installation
Dodge Caravan 1988
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Dodge Caravan 1989
  • 2.5L L4 2507CC/153CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge Caravan 1990
  • 2.5L L4 2507CC/153CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge Caravan 1991
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Dodge Caravan 1992
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Dodge Caravan 1993
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Dodge Caravan 1994
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Dodge Caravan 1995
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Dodge Charger 1983
  • Front
  • 1.6L L4 1595CC/97cCID
  • 1.7L L4 105CID
  • Air Tube
  • Cutting and Welding Required During Installation
Dodge Colt 1987
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
  • Split Date From: From 12/1986
Dodge Colt 1988
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
Dodge Colt 1989
  • Wagon
  • Hatchback
  • Sedan
  • 2L L4 1997CC/122CID
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
  • USA
  • Federal Emissions Equipped
  • CAN
Dodge Colt 1990
  • Wagon
  • 2L L4 1997CC/122CID
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
  • Federal Emissions Equipped
Dodge Colt 1991
  • Wagon
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
  • Federal Emissions Equipped
Dodge Conquest 1984
  • Rear
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Dodge Conquest 1985
  • Rear
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Dodge Conquest 1986
  • Rear
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Dodge D150 1977
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Dodge Dakota 1989
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Dodge Dakota 1990
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Dodge Dakota 1991
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Dodge Dakota 1992
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Dodge Dakota 1993
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Dodge Dakota 1994
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Dodge Dakota 1995
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Dodge Diplomat 1979
  • Wagon
  • 3.7L L6 3687CC/225CID
  • without Air Tube
  • Cutting and Welding Required During Installation
Dodge Diplomat 1981
  • Wagon
  • 3.7L L6 3687CC/225CID
  • without Air Tube
  • Cutting and Welding Required During Installation
Dodge Dynasty 1988
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Dodge Dynasty 1989
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Dodge Dynasty 1990
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Dodge Dynasty 1991
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Dodge Dynasty 1992
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Dodge Dynasty 1993
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Dodge Grand Caravan 1988
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Dodge Grand Caravan 1989
  • 2.5L L4 2507CC/153CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge Lancer 1985
  • Rear
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge Lancer 1986
  • Rear
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge Mini Ram 1987
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
  • CAN
Dodge Mini Ram 1988
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
  • CAN
Dodge Mirada 1981
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Dodge Ram 50 1990
  • 4WD
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge Ram 50 1991
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge Shadow 1989
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge Shadow 1990
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Eagle 2000 GTX 1991
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
  • CAN
Eagle 2000 GTX 1992
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
  • CAN
Eagle Talon 1990
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
Eagle Talon 1991
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
Eagle Talon 1992
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
Eagle Talon 1993
  • 1.8L L4 1755CC/107CID
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
Eagle Talon 1994
  • 1.8L L4 1755CC/107CID
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
Eagle Vista 1990
  • 4WD
  • 1.5L L4 1468CC/90cCID
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
  • CAN
Eagle Vista 1991
  • FWD
  • 4WD
  • 1.5L L4 1468CC/90cCID
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
  • CAN
Ford Aerostar 1986
  • Front
  • Rear
  • 2.3L L4 140CID
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Ford Aerostar 1987
  • Front
  • Rear
  • 2.3L L4 140CID
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Ford Aerostar 1988
  • Front
  • Rear
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Ford Aerostar 1989
  • Front
  • Rear
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Ford Aerostar 1990
  • Rear
  • Front
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Ford Aerostar 1991
  • Rear
  • Front
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Ford Aerostar 1992
  • Rear
  • Front
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Ford Aerostar 1993
  • Front
  • Rear
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Ford Aerostar 1994
  • Rear
  • Front
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Ford Aerostar 1995
  • Rear
  • Front
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Ford Aspire 1994
  • 1.3L L4 1295CC
  • Cutting and Welding Required During Installation
Ford Aspire 1995
  • 1.3L L4 1295CC
  • Cutting and Welding Required During Installation
Ford Contour 1995
  • Rear
  • Automatic
  • 2.5L V6 2450CC/155CID
  • Cutting and Welding Required During Installation
Ford Courier 1980
  • 2L L4 1989CC/122CID
  • Cutting and Welding Required During Installation
Ford Escort 1991
  • 1.8L L4 112CID
  • Cutting and Welding Required During Installation
Ford Escort 1992
  • 1.8L L4 112CID
  • Cutting and Welding Required During Installation
Ford Escort 1993
  • 1.8L L4 112CID
  • Cutting and Welding Required During Installation
Ford Escort 1994
  • 1.8L L4 112CID
  • Cutting and Welding Required During Installation
Ford Escort 1995
  • 1.8L L4 112CID
  • Cutting and Welding Required During Installation
Ford Mustang 1994
  • Left
  • Rear Right
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Ford Mustang 1995
  • Left
  • Rear Right
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Ford Probe 1989
  • Automatic
  • Standard
  • 2.2L L4 133CID
  • Cutting and Welding Required During Installation
Ford Probe 1990
  • Automatic
  • Standard
  • 2.2L L4 133CID
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Ford Probe 1991
  • Automatic
  • Standard
  • 2.2L L4 133CID
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Ford Probe 1992
  • Automatic
  • Standard
  • 2.2L L4 133CID
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Ford Ranger 1986
  • 2.3L L4 140CID
  • GAS
  • Cutting and Welding Required During Installation
  • Split Date From: From 01/1986 To: To 11/1986
Ford Ranger 1987
  • Automatic
  • Standard
  • Standard Cab Pickup
  • Extended Cab Pickup
  • 2.3L L4 140CID
  • GAS
  • Cutting and Welding Required During Installation
  • Split Date From: From 01/1986 To: To 11/1986
  • Split Date From: From 11/1986
Ford Ranger 1988
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Ford Tempo 1992
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Ford Tempo 1993
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Ford Tempo 1994
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Geo Metro 1989
  • Automatic
  • 1L L3 993CC/61cCID
  • Naturally Aspirated
  • with Sway Bar
  • Cutting and Welding Required During Installation
Geo Metro 1990
  • Automatic
  • 1L L3 993CC/61cCID
  • Naturally Aspirated
  • with Sway Bar
  • Cutting and Welding Required During Installation
Geo Metro 1991
  • Automatic
  • 1L L3 993CC/61cCID
  • with Sway Bar
  • Cutting and Welding Required During Installation
Geo Metro 1992
  • Automatic
  • 1L L3 993CC/61cCID
  • with Sway Bar
  • Cutting and Welding Required During Installation
Geo Metro 1993
  • Automatic
  • 1L L3 993CC/61cCID
  • with Sway Bar
  • Cutting and Welding Required During Installation
Geo Metro 1994
  • Automatic
  • 1L L3 993CC/61cCID
  • with Sway Bar
  • Cutting and Welding Required During Installation
Geo Storm 1990
  • 1.6L L4 1588CC/98cCID
  • Cutting and Welding Required During Installation
Geo Storm 1991
  • 1.6L L4 1588CC/98cCID
  • Cutting and Welding Required During Installation
GMC Sonoma 1994
  • 2.2L L4 2190CC/134CID
  • Cutting and Welding Required During Installation
GMC Sonoma 1995
  • 2.2L L4 2190CC/134CID
  • Cutting and Welding Required During Installation
Honda Odyssey 1995
  • 2.2L L4 2156CC
  • Cutting and Welding Required During Installation
Hyundai Elantra 1992
  • 1.6L L4 1596CC
  • Cutting and Welding Required During Installation
Hyundai Elantra 1993
  • 1.8L L4 1836CC
  • 1.6L L4 1596CC
  • Cutting and Welding Required During Installation
Hyundai Elantra 1994
  • 1.8L L4 1836CC
  • 1.6L L4 1596CC
  • Cutting and Welding Required During Installation
Hyundai Elantra 1995
  • 1.8L L4 1836CC
  • 1.6L L4 1596CC
  • Cutting and Welding Required During Installation
Hyundai Scoupe 1993
  • 1.5L L4 1495CC
  • Cutting and Welding Required During Installation
Hyundai Scoupe 1994
  • 1.5L L4 1495CC
  • Cutting and Welding Required During Installation
Hyundai Scoupe 1995
  • 1.5L L4 1495CC
  • Turbocharged
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Hyundai Sonata 1989
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Hyundai Sonata 1990
  • 2.4L L4 2351CC
  • 3L V6 2972CC
  • Cutting and Welding Required During Installation
Hyundai Sonata 1991
  • 2.4L L4 2351CC
  • 3L V6 2972CC
  • Cutting and Welding Required During Installation
Hyundai Sonata 1992
  • 3L V6 2972CC
  • 2L L4 1997CC
  • Cutting and Welding Required During Installation
Hyundai Sonata 1993
  • 3L V6 2972CC
  • 2L L4 1997CC
  • Cutting and Welding Required During Installation
Hyundai Sonata 1994
  • 3L V6 2972CC
  • 2L L4 1997CC
  • Cutting and Welding Required During Installation
Hyundai Sonata 1995
  • 3L V6 2972CC
  • 2L L4 1997CC
  • Cutting and Welding Required During Installation
Infiniti G20 1991
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Infiniti G20 1992
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Infiniti G20 1993
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Infiniti G20 1994
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Infiniti M30 1990
  • Left
  • Right
  • 3L V6 2960CC/181CID
  • Cutting and Welding Required During Installation
Infiniti M30 1991
  • Left
  • Right
  • 3L V6 2960CC/181CID
  • Cutting and Welding Required During Installation
Infiniti M30 1992
  • Left
  • Right
  • 3L V6 2960CC/181CID
  • Cutting and Welding Required During Installation
Isuzu I-Mark 1989
  • 1.6L L4 1588CC
  • Cutting and Welding Required During Installation
Isuzu Stylus 1991
  • 1.6L L4 1588CC
  • Cutting and Welding Required During Installation
Isuzu Stylus 1992
  • 1.6L L4 1588CC
  • 1.8L L4 1817CC
  • Cutting and Welding Required During Installation
Isuzu Stylus 1993
  • 1.6L L4 1588CC
  • Cutting and Welding Required During Installation
Jaguar Vanden Plas 1990
  • Rear Right
  • Rear Left
  • 4L L6 3980CC
  • Cutting and Welding Required During Installation
Jaguar Vanden Plas 1991
  • Rear Right
  • Rear Left
  • 4L L6 3980CC
  • Cutting and Welding Required During Installation
Jaguar Vanden Plas 1992
  • Rear Right
  • Rear Left
  • 4L L6 3980CC
  • Cutting and Welding Required During Installation
Jaguar Vanden Plas 1993
  • Rear Right
  • Rear Left
  • 4L L6 3980CC
  • Cutting and Welding Required During Installation
Jaguar Vanden Plas 1994
  • Rear Right
  • Rear Left
  • 4L L6 3980CC
  • Cutting and Welding Required During Installation
Jaguar XJ6 1990
  • Rear Right
  • Rear Left
  • 4L L6 3980CC
  • Cutting and Welding Required During Installation
  • USA
  • CAN
Jaguar XJ6 1991
  • Rear Right
  • Rear Left
  • 4L L6 3980CC
  • Cutting and Welding Required During Installation
  • USA
  • CAN
Jaguar XJ6 1992
  • Rear Right
  • Rear Left
  • 4L L6 3980CC
  • Cutting and Welding Required During Installation
  • USA
  • CAN
Jaguar XJ6 1993
  • Rear Right
  • Rear Left
  • 4L L6 3980CC
  • Cutting and Welding Required During Installation
Jaguar XJ6 1994
  • Rear Right
  • Rear Left
  • 4L L6 3980CC
  • Cutting and Welding Required During Installation
Jaguar XJ12 1975
  • 5.3L V12 5343CC
  • Cutting and Welding Required During Installation
Jaguar XJS 1982
  • Rear Left
  • Rear Right
  • 5.3L V12 5343CC
  • Cutting and Welding Required During Installation
  • CAN
Jaguar XJS 1983
  • Rear Right
  • Rear Left
  • 5.3L V12 5343CC
  • Cutting and Welding Required During Installation
  • CAN
Jaguar XJS 1984
  • Rear Right
  • Rear Left
  • 5.3L V12 5343CC
  • Cutting and Welding Required During Installation
  • CAN
Jaguar XJS 1985
  • Rear Left
  • Rear Right
  • 5.3L V12 5343CC
  • Cutting and Welding Required During Installation
  • CAN
Jaguar XJS 1986
  • Rear Left
  • Rear Right
  • 5.3L V12 5343CC
  • Cutting and Welding Required During Installation
  • CAN
Jaguar XJS 1987
  • Rear Left
  • Rear Right
  • 5.3L V12 5343CC
  • Cutting and Welding Required During Installation
  • CAN
Jaguar XJS 1992
  • Rear
  • 4L L6 3980CC
  • Cutting and Welding Required During Installation
  • CAN
Jaguar XJS 1993
  • Rear Right
  • Rear Left
  • 4L L6 3980CC
  • Cutting and Welding Required During Installation
Jaguar XJS 1994
  • Rear Right
  • Rear Left
  • 4L L6 3980CC
  • Cutting and Welding Required During Installation
Jaguar XJS 1995
  • Rear Right
  • Rear Left
  • 4L L6 3980CC
  • Cutting and Welding Required During Installation
Jaguar XJS 1996
  • Rear Left
  • Rear Right
  • 4L L6 3980CC
  • Cutting and Welding Required During Installation
Kia Sephia 1994
  • 1.6L L4 1597CC
  • Cutting and Welding Required During Installation
Kia Sephia 1995
  • Rear
  • 1.6L L4 1597CC
  • Cutting and Welding Required During Installation
Land Rover Range Rover 1987
  • Front Left
  • Front Right
  • 3.5L V8 3532CC/216CID
  • Cutting and Welding Required During Installation
Land Rover Range Rover 1988
  • Front Left
  • Front Right
  • 3.5L V8 3532CC/216CID
  • Cutting and Welding Required During Installation
Lexus ES250 1990
  • 2.5L V6 2508CC
  • Cutting and Welding Required During Installation
Lexus ES250 1991
  • 2.5L V6 2508CC
  • Cutting and Welding Required During Installation
Lexus SC400 1992
  • Left
  • Right
  • 4L V8 3969CC
  • Cutting and Welding Required During Installation
Lexus SC400 1993
  • Left
  • Right
  • 4L V8 3969CC
  • Cutting and Welding Required During Installation
Lexus SC400 1994
  • Left
  • Right
  • 4L V8 3969CC
  • Cutting and Welding Required During Installation
Lexus SC400 1995
  • Right
  • Left
  • 4L V8 3969CC
  • Cutting and Welding Required During Installation
Lotus Elan 1990
  • 1.6L L4 1588CC
  • Cutting and Welding Required During Installation
Lotus Elan 1991
  • 1.6L L4 1588CC
  • Cutting and Welding Required During Installation
Lotus Elan 1992
  • 1.6L L4 1588CC
  • Cutting and Welding Required During Installation
Lotus Esprit 1980
  • 2.2L L4 2174CC
  • Cutting and Welding Required During Installation
Lotus Esprit 1981
  • 2.2L L4 2174CC
  • Cutting and Welding Required During Installation
Lotus Esprit 1982
  • 2.2L L4 2174CC
  • Cutting and Welding Required During Installation
Lotus Esprit 1983
  • 2.2L L4 2174CC
  • Cutting and Welding Required During Installation
Lotus Esprit 1984
  • 2.2L L4 2174CC
  • Cutting and Welding Required During Installation
Lotus Esprit 1985
  • 2.2L L4 2174CC
  • Cutting and Welding Required During Installation
Lotus Esprit 1986
  • 2.2L L4 2174CC
  • Cutting and Welding Required During Installation
Lotus Esprit 1987
  • 2.2L L4 2174CC
  • Cutting and Welding Required During Installation
Lotus Esprit 1988
  • 2.2L L4 2174CC
  • Cutting and Welding Required During Installation
Lotus Esprit 1989
  • 2.2L L4 2174CC
  • Cutting and Welding Required During Installation
Lotus Esprit 1990
  • 2.2L L4 2174CC
  • Cutting and Welding Required During Installation
Lotus Esprit 1991
  • 2.2L L4 2174CC
  • Cutting and Welding Required During Installation
Lotus Esprit 1992
  • 2.2L L4 2174CC
  • Cutting and Welding Required During Installation
Lotus Esprit 1993
  • 2.2L L4 2174CC
  • Cutting and Welding Required During Installation
Lotus Esprit 1994
  • 2.2L L4 2174CC
  • Cutting and Welding Required During Installation
Lotus Esprit 1995
  • 2.2L L4 2174CC
  • Cutting and Welding Required During Installation
Mazda 323 1986
  • 1.6L L4 1597CC
  • Cutting and Welding Required During Installation
Mazda 323 1987
  • 1.6L L4 1597CC
  • Cutting and Welding Required During Installation
Mazda 323 1988
  • 1.6L L4 1597CC
  • Cutting and Welding Required During Installation
Mazda 323 1989
  • 1.6L L4 1597CC
  • Cutting and Welding Required During Installation
Mazda 323 1990
  • 1.6L L4 1597CC
  • Cutting and Welding Required During Installation
Mazda 323 1991
  • 1.6L L4 1597CC
  • Cutting and Welding Required During Installation
Mazda 323 1992
  • 1.6L L4 1597CC
  • Cutting and Welding Required During Installation
Mazda 323 1993
  • 1.6L L4 1597CC
  • Cutting and Welding Required During Installation
Mazda 323 1994
  • 1.6L L4 1597CC
  • Cutting and Welding Required During Installation
Mazda 626 1988
  • 2.2L L4 2184CC
  • Cutting and Welding Required During Installation
Mazda 626 1989
  • 2.2L L4 2184CC
  • Cutting and Welding Required During Installation
Mazda 626 1990
  • 2.2L L4 2184CC
  • Cutting and Welding Required During Installation
Mazda 626 1991
  • 2.2L L4 2184CC
  • Cutting and Welding Required During Installation
Mazda 626 1992
  • 2.2L L4 2184CC
  • Cutting and Welding Required During Installation
Mazda 626 1994
  • Rear
  • 2L L4 1991CC
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Mazda 626 1995
  • Rear
  • 2L L4 1991CC
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Mazda 929 1988
  • 3L V6 2954CC/180CID
  • Cutting and Welding Required During Installation
Mazda 929 1989
  • 3L V6 2954CC/180CID
  • Cutting and Welding Required During Installation
Mazda 929 1990
  • 3L V6 2954CC/180CID
  • SOHC
  • Cutting and Welding Required During Installation
Mazda 929 1991
  • 3L V6 2954CC/180CID
  • SOHC
  • Cutting and Welding Required During Installation
Mazda B2300 1994
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Mazda B2300 1995
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Mazda B2600 1989
  • 2.6L L4 2606CC
  • Cutting and Welding Required During Installation
Mazda B2600 1990
  • 2.6L L4 2606CC
  • Cutting and Welding Required During Installation
Mazda B3000 1994
  • Rear
  • Front
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Mazda B3000 1995
  • Front
  • Rear
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Mazda B4000 1994
  • Front
  • Rear
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Mazda MPV 1994
  • Front
  • Rear
  • 3L V6 2954CC/180CID
  • Cutting and Welding Required During Installation
Mazda MX-6 1988
  • 2.2L L4 2184CC
  • Cutting and Welding Required During Installation
Mazda MX-6 1989
  • 2.2L L4 2184CC
  • Cutting and Welding Required During Installation
Mazda MX-6 1990
  • 2.2L L4 2184CC
  • Cutting and Welding Required During Installation
Mazda MX-6 1991
  • 2.2L L4 2184CC
  • Cutting and Welding Required During Installation
Mazda MX-6 1992
  • 2.2L L4 2184CC
  • Cutting and Welding Required During Installation
Mazda MX-6 1995
  • Rear
  • 2L L4 1991CC
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Mazda Protege 1990
  • 1.8L L4 1839CC
  • Cutting and Welding Required During Installation
Mazda Protege 1991
  • 1.8L L4 1839CC
  • Cutting and Welding Required During Installation
Mazda Protege 1992
  • 1.8L L4 1839CC
  • Cutting and Welding Required During Installation
Mazda Protege 1993
  • 1.8L L4 1839CC
  • Cutting and Welding Required During Installation
Mazda Protege 1994
  • 1.8L L4 1839CC
  • Cutting and Welding Required During Installation
Mazda Protege 1995
  • 1.8L L4 1839CC
  • Cutting and Welding Required During Installation
Mercury Capri 1991
  • 1.6L L4 1598CC/98cCID
  • Cutting and Welding Required During Installation
Mercury Capri 1992
  • 1.6L L4 1598CC/98cCID
  • Cutting and Welding Required During Installation
Mercury Capri 1993
  • 1.6L L4 1598CC/98cCID
  • Cutting and Welding Required During Installation
Mercury Capri 1994
  • 1.6L L4 1598CC/98cCID
  • Cutting and Welding Required During Installation
Mercury Grand Marquis 1983
  • Rear Right
  • Rear Left
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Mercury Grand Marquis 1984
  • Rear Left
  • Rear Right
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Mercury Grand Marquis 1985
  • Rear Left
  • Rear Right
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Mercury Grand Marquis 1989
  • Rear Left
  • Rear Right
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Mercury Mystique 1995
  • Rear
  • Automatic
  • 2.5L V6 2450CC/155CID
  • Cutting and Welding Required During Installation
Mercury Topaz 1992
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Mercury Topaz 1993
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Mercury Topaz 1994
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Mercury Tracer 1987
  • 1.6L L4 1597CC/98cCID
  • Cutting and Welding Required During Installation
  • CAN
Mercury Tracer 1988
  • 1.6L L4 1598CC/98cCID
  • Cutting and Welding Required During Installation
Mercury Tracer 1989
  • 1.6L L4 1598CC/98cCID
  • Cutting and Welding Required During Installation
Mercury Tracer 1990
  • 1.6L L4 1598CC/98cCID
  • Cutting and Welding Required During Installation
  • CAN
Mercury Tracer 1991
  • 1.8L L4 112CID
  • Cutting and Welding Required During Installation
Mercury Tracer 1992
  • 1.8L L4 112CID
  • Cutting and Welding Required During Installation
Mercury Tracer 1993
  • 1.8L L4 112CID
  • Cutting and Welding Required During Installation
Mercury Tracer 1994
  • 1.8L L4 112CID
  • Cutting and Welding Required During Installation
Mercury Tracer 1995
  • 1.8L L4 112CID
  • Cutting and Welding Required During Installation
Mitsubishi 3000GT 1991
  • 3L V6 2972CC/181CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Mitsubishi 3000GT 1992
  • 3L V6 2972CC/181CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Mitsubishi 3000GT 1993
  • 3L V6 2972CC/181CID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
Mitsubishi 3000GT 1994
  • 3L V6 2972CC/181CID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
Mitsubishi 3000GT 1995
  • 3L V6 2972CC/181CID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
Mitsubishi Diamante 1992
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Mitsubishi Eclipse 1990
  • 2L L4 1997CC/122CID
  • 1.8L L4 1755CC/107CID
  • Cutting and Welding Required During Installation
Mitsubishi Eclipse 1991
  • 2L L4 1997CC/122CID
  • 1.8L L4 1755CC/107CID
  • Cutting and Welding Required During Installation
Mitsubishi Eclipse 1992
  • 2L L4 1997CC/122CID
  • 1.8L L4 1755CC/107CID
  • Cutting and Welding Required During Installation
Mitsubishi Eclipse 1993
  • 2L L4 1997CC/122CID
  • 1.8L L4 1755CC/107CID
  • Cutting and Welding Required During Installation
Mitsubishi Eclipse 1994
  • 2L L4 1997CC/122CID
  • 1.8L L4 1755CC/107CID
  • Cutting and Welding Required During Installation
Mitsubishi Galant 1985
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Mitsubishi Galant 1986
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Mitsubishi Galant 1989
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
Mitsubishi Galant 1990
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
Mitsubishi Galant 1991
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
Mitsubishi Galant 1992
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
Mitsubishi Galant 1993
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
Mitsubishi Mighty Max 1990
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Mitsubishi Mighty Max 1991
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Mitsubishi Mighty Max 1992
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Mitsubishi Mighty Max 1993
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Mitsubishi Mighty Max 1994
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Mitsubishi Mirage 1991
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
Mitsubishi Montero 1989
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Mitsubishi Montero 1990
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Mitsubishi Montero 1991
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Mitsubishi Montero 1992
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Mitsubishi Montero 1993
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Mitsubishi Montero 1994
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Mitsubishi Montero 1995
  • Rear
  • 3L V6 2972CC/181CID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
Mitsubishi Starion 1983
  • Rear
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Mitsubishi Starion 1984
  • Rear
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Mitsubishi Starion 1985
  • Rear
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Mitsubishi Starion 1986
  • Rear
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Mitsubishi Starion 1987
  • Rear
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Mitsubishi Starion 1988
  • Rear
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Mitsubishi Starion 1989
  • Rear
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Nissan 210 1979
  • 1.4L L4 1393CC/85cCID
  • 1.5L L4 1488CC
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
Nissan Altima 1993
  • 2.4L L4 2389CC
  • Cutting and Welding Required During Installation
Nissan Altima 1994
  • 2.4L L4 2389CC
  • Cutting and Welding Required During Installation
Nissan Altima 1995
  • Rear
  • 2.4L L4 2389CC
  • Cutting and Welding Required During Installation
Nissan Altima 1996
  • Rear
  • 2.4L L4 2389CC
  • Cutting and Welding Required During Installation
Nissan Altima 1997
  • Rear
  • 2.4L L4 2389CC
  • Cutting and Welding Required During Installation
Nissan Micra 1988
  • 1.2L L4 1229CC/75cCID
  • Cutting and Welding Required During Installation
  • CAN
Nissan Micra 1989
  • 1.2L L4 1229CC/75cCID
  • Cutting and Welding Required During Installation
  • CAN
Nissan Micra 1990
  • 1.2L L4 1229CC/75cCID
  • Cutting and Welding Required During Installation
  • CAN
Nissan Micra 1991
  • 1.2L L4 1229CC/75cCID
  • Cutting and Welding Required During Installation
  • CAN
Nissan Sentra 1982
  • 1.5L L4 1488CC
  • Cutting and Welding Required During Installation
Nissan Sentra 1983
  • 1.5L L4 1488CC
  • Cutting and Welding Required During Installation
Nissan Sentra 1986
  • Front
  • 1.6L L4 1597CC/97cCID
  • Cutting and Welding Required During Installation
Nissan Sentra 1987
  • Front
  • 1.6L L4 1597CC/97cCID
  • Cutting and Welding Required During Installation
  • CARB
Oldsmobile 98 1985
  • 3.8L V6 3800CC/231CID
  • 3L V6 181CID
  • Cutting and Welding Required During Installation
Oldsmobile Achieva 1993
  • 2.3L L4 138CID
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Oldsmobile Achieva 1994
  • 3.1L V6 189CID
  • 2.3L L4 138CID
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Oldsmobile Achieva 1995
  • 3.1L V6 189CID
  • 2.3L L4 138CID
  • Cutting and Welding Required During Installation
Oldsmobile Calais 1985
  • 2.5L L4 2474CC/151CID
  • 3L V6 181CID
  • Cutting and Welding Required During Installation
Oldsmobile Calais 1986
  • 2.5L L4 2474CC/151CID
  • 3L V6 181CID
  • Cutting and Welding Required During Installation
Oldsmobile Calais 1987
  • 2.5L L4 2474CC/151CID
  • 3L V6 181CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Calais 1988
  • 2.5L L4 2474CC/151CID
  • 3L V6 181CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Calais 1989
  • 2.5L L4 2474CC/151CID
  • 3.3L V6 204CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Calais 1990
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Calais 1991
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Ciera 1983
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Ciera 1984
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Ciera 1985
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Ciera 1986
  • 3.8L V6 3800CC/231CID
  • 2.5L L4 2474CC/151CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
  • W
  • FI
Oldsmobile Cutlass Ciera 1987
  • 3.8L V6 3800CC/231CID
  • 2.5L L4 2474CC/151CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Ciera 1988
  • 3.8L V6 3800CC/231CID
  • 2.5L L4 2474CC/151CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Ciera 1989
  • 2.5L L4 2474CC/151CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Ciera 1990
  • 2.5L L4 2474CC/151CID
  • without Air Tube
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Ciera 1991
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Ciera 1992
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Ciera 1993
  • 2.2L L4 2190CC/134CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Ciera 1994
  • 2.2L L4 2190CC/134CID
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Ciera 1995
  • 2.2L L4 2190CC/134CID
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Cruiser 1987
  • 3.8L V6 3800CC/231CID
  • 2.5L L4 2474CC/151CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Cruiser 1988
  • 3.8L V6 3800CC/231CID
  • 2.5L L4 2474CC/151CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Cruiser 1989
  • 2.5L L4 2474CC/151CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Cruiser 1990
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Cruiser 1991
  • 2.5L L4 2474CC/151CID
  • without Air Tube
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Cruiser 1992
  • 2.5L L4 2474CC/151CID
  • without Air Tube
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Cruiser 1994
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Supreme 1988
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Supreme 1989
  • 3.1L V6 189CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Supreme 1990
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Supreme 1993
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Oldsmobile Firenza 1985
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Oldsmobile Firenza 1986
  • 2.8L V6 173CID
  • without Air Tube
  • Cutting and Welding Required During Installation
Oldsmobile Firenza 1987
  • 2L L4 122CID
  • 2.8L V6 173CID
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Oldsmobile Firenza 1988
  • 2L L4 122CID
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Oldsmobile Omega 1982
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Oldsmobile Omega 1983
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Oldsmobile Omega 1984
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Oldsmobile Starfire 1976
  • 2.3L L4 2294CC/140CID
  • Cutting and Welding Required During Installation
Oldsmobile Starfire 1977
  • 2.3L L4 2294CC/140CID
  • Cutting and Welding Required During Installation
Oldsmobile Starfire 1979
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Oldsmobile Toronado 1989
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Oldsmobile Toronado 1990
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Oldsmobile Toronado 1991
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Oldsmobile Toronado 1992
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Plymouth Caravelle 1985
  • Rear
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Plymouth Caravelle 1986
  • Rear
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Plymouth Champ 1981
  • 1.4L L4 1410CC
  • 1.6L L4 1597CC/98cCID
  • Cutting and Welding Required During Installation
Plymouth Colt 1987
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
  • Split Date From: From 12/1986
Plymouth Colt 1988
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
Plymouth Colt 1989
  • Vista
  • Sedan
  • Hatchback
  • 1.5L L4 1468CC/90cCID
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
  • USA
  • Federal Emissions Equipped
  • CAN
Plymouth Colt 1990
  • Sedan
  • Hatchback
  • 2L L4 1997CC/122CID
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
  • USA
  • CAN
Plymouth Colt 1991
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
Plymouth Conquest 1984
  • Rear
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Plymouth Conquest 1985
  • Rear
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Plymouth Conquest 1986
  • Rear
  • 2.6L L4 2555CC/156CID
  • Cutting and Welding Required During Installation
Plymouth Duster 1975
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Plymouth Grand Voyager 1988
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Plymouth Laser 1990
  • 1.8L L4 1755CC/107CID
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
Plymouth Laser 1991
  • 1.8L L4 1755CC/107CID
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
Plymouth Laser 1992
  • 1.8L L4 1755CC/107CID
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
Plymouth Laser 1993
  • 1.8L L4 1755CC/107CID
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
Plymouth Laser 1994
  • 1.8L L4 1755CC/107CID
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
Plymouth Scamp 1975
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Plymouth Scamp 1976
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Plymouth Turismo 1983
  • Rear
  • Front
  • 1.6L L4 1595CC/97cCID
  • 1.6L L4 1597CC/98cCID
  • Cutting and Welding Required During Installation
  • Air Tube
  • CAN
Plymouth Voyager 1986
  • 2.6L L4 2555CC/156CID
  • without Air Tube
  • Cutting and Welding Required During Installation
Plymouth Voyager 1987
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Plymouth Voyager 1988
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Plymouth Voyager 1989
  • 2.5L L4 2507CC/153CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Plymouth Voyager 1990
  • 2.5L L4 2507CC/153CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Plymouth Voyager 1991
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Plymouth Voyager 1992
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Plymouth Voyager 1993
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Plymouth Voyager 1994
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Plymouth Voyager 1995
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Pontiac 6000 1982
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Pontiac 6000 1983
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Pontiac 6000 1984
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Pontiac 6000 1985
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Pontiac 6000 1986
  • 2.5L L4 2474CC/151CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
  • FI
Pontiac 6000 1987
  • 2.5L L4 2474CC/151CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Pontiac 6000 1988
  • 2.5L L4 2474CC/151CID
  • 3.1L V6 189CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Pontiac 6000 1989
  • 2.5L L4 2474CC/151CID
  • 3.1L V6 189CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Pontiac 6000 1990
  • 2.5L L4 2474CC/151CID
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Pontiac 6000 1991
  • 2.5L L4 2474CC/151CID
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Pontiac Acadian 1979
  • 1.6L L4 1606CC/98cCID
  • Cutting and Welding Required During Installation
  • CAN
Pontiac Acadian 1980
  • 1.6L L4 1606CC/98cCID
  • Cutting and Welding Required During Installation
  • CAN
Pontiac Astre 1975
  • 2.3L L4 2294CC/140CID
  • without A.I.R
  • Cutting and Welding Required During Installation
Pontiac Astre 1976
  • 2.3L L4 2294CC/140CID
  • Cutting and Welding Required During Installation
Pontiac Astre 1977
  • 2.3L L4 2294CC/140CID
  • Cutting and Welding Required During Installation
Pontiac Firebird 1982
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Pontiac Firebird 1983
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Pontiac Firebird 1984
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Pontiac Firebird 1985
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Pontiac Firebird 1986
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Pontiac Firefly 1985
  • 1L L3 993CC/61cCID
  • Cutting and Welding Required During Installation
  • CAN
Pontiac Firefly 1986
  • 1L L3 993CC/61cCID
  • Cutting and Welding Required During Installation
  • CAN
Pontiac Firefly 1987
  • 1L L3 993CC/61cCID
  • Cutting and Welding Required During Installation
  • CAN
Pontiac Firefly 1990
  • 1L L3 993CC/61cCID
  • Turbocharged
  • Cutting and Welding Required During Installation
  • CAN
Pontiac Firefly 1991
  • 1L L3 993CC/61cCID
  • Turbocharged
  • Cutting and Welding Required During Installation
  • CAN
Pontiac Grand Am 1985
  • 2.5L L4 2474CC/151CID
  • 3L V6 181CID
  • Cutting and Welding Required During Installation
Pontiac Grand Am 1986
  • 2.5L L4 2474CC/151CID
  • 3L V6 181CID
  • Cutting and Welding Required During Installation
Pontiac Grand Am 1987
  • 2.5L L4 2474CC/151CID
  • 3L V6 181CID
  • 2L L4 122CID
  • Cutting and Welding Required During Installation
Pontiac Grand Am 1988
  • 2.5L L4 2474CC/151CID
  • 2L L4 122CID
  • Cutting and Welding Required During Installation
Pontiac Grand Am 1989
  • 2.5L L4 2474CC/151CID
  • 2L L4 122CID
  • Cutting and Welding Required During Installation
Pontiac Grand Am 1990
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Pontiac Grand Am 1991
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Pontiac Grand Am 1993
  • 2.3L L4 138CID
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Pontiac Grand Am 1994
  • 3.1L V6 189CID
  • 2.3L L4 138CID
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Pontiac Grand Am 1995
  • SE
  • GT
  • 3.1L V6 189CID
  • 2.3L L4 138CID
  • Cutting and Welding Required During Installation
Pontiac Grand Prix 1988
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Pontiac Grand Prix 1989
  • 3.1L V6 189CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Pontiac Grand Prix 1990
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Pontiac Grand Prix 1991
  • 3.1L V6 189CID
  • Excluding Dual Exhaust
  • Cutting and Welding Required During Installation
Pontiac Grand Prix 1992
  • 3.1L V6 189CID
  • Excluding Dual Exhaust
  • Cutting and Welding Required During Installation
Pontiac Grand Prix 1993
  • 3.1L V6 189CID
  • Excluding Dual Exhaust
  • Cutting and Welding Required During Installation
Pontiac J2000 Sunbird 1984
  • 1.8L L4 112CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Pontiac J2000 Sunbird 1985
  • 1.8L L4 112CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Pontiac LeMans 1988
  • 1.6L L4 1588CC/98cCID
  • Cutting and Welding Required During Installation
Pontiac LeMans 1989
  • 2L L4 122CID
  • 1.6L L4 1588CC/98cCID
  • Cutting and Welding Required During Installation
Pontiac LeMans 1990
  • 2L L4 122CID
  • 1.6L L4 1588CC/98cCID
  • Cutting and Welding Required During Installation
Pontiac LeMans 1991
  • 1.6L L4 1588CC/98cCID
  • Cutting and Welding Required During Installation
Pontiac LeMans 1992
  • 1.6L L4 1588CC/98cCID
  • Cutting and Welding Required During Installation
Pontiac LeMans 1993
  • 1.6L L4 1588CC/98cCID
  • Cutting and Welding Required During Installation
Pontiac Optima 1988
  • 1.6L L4 1588CC/98cCID
  • Cutting and Welding Required During Installation
  • CAN
Pontiac Optima 1989
  • 1.6L L4 1588CC/98cCID
  • Cutting and Welding Required During Installation
  • CAN
Pontiac Optima 1990
  • 1.6L L4 1588CC/98cCID
  • 2L L4 122CID
  • Cutting and Welding Required During Installation
  • CAN
Pontiac Optima 1991
  • 1.6L L4 1588CC/98cCID
  • Cutting and Welding Required During Installation
  • CAN
Pontiac Sunbird 1976
  • 2.3L L4 2294CC/140CID
  • without A.I.R
  • Cutting and Welding Required During Installation
Pontiac Sunbird 1977
  • 2.3L L4 2294CC/140CID
  • Cutting and Welding Required During Installation
Pontiac Sunbird 1978
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Pontiac Sunbird 1986
  • 1.8L L4 112CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Pontiac Sunbird 1987
  • 2L L4 122CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Pontiac Sunbird 1988
  • 2L L4 122CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Pontiac Sunbird 1989
  • 2L L4 122CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Pontiac Sunbird 1990
  • 2L L4 122CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Pontiac Sunbird 1991
  • 3.1L V6 189CID
  • 2L L4 122CID
  • Cutting and Welding Required During Installation
Pontiac Sunbird 1992
  • 3.1L V6 189CID
  • 2L L4 122CID
  • Cutting and Welding Required During Installation
Pontiac Sunbird 1993
  • 3.1L V6 189CID
  • 2L L4 122CID
  • Cutting and Welding Required During Installation
Pontiac Sunbird 1994
  • 3.1L V6 189CID
  • 2L L4 122CID
  • Cutting and Welding Required During Installation
Pontiac Sunfire 1995
  • 2.2L L4 2190CC/134CID
  • 2.3L L4 138CID
  • Cutting and Welding Required During Installation
Pontiac Tempest 1987
  • 2L L4 122CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
  • CAN
Pontiac Tempest 1988
  • 2L L4 122CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
  • CAN
Pontiac Tempest 1989
  • 2L L4 122CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
  • CAN
Pontiac Tempest 1990
  • 2.2L L4 134CID
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
  • CAN
Pontiac Tempest 1991
  • 2.2L L4 134CID
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
  • CAN
Porsche 914 1975
  • 1.8L H4 1795CC
  • Cutting and Welding Required During Installation
Porsche 924 1980
  • 2L L4 1983CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Porsche 924 1981
  • 2L L4 1983CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Porsche 924 1982
  • 2L L4 1983CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Porsche 924 1987
  • 2.5L L4 2475CC
  • Cutting and Welding Required During Installation
Porsche 924 1988
  • 2.5L L4 2475CC
  • Cutting and Welding Required During Installation
Porsche 944 1986
  • 2.5L L4 2475CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Porsche 944 1987
  • 2.5L L4 2475CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Porsche 944 1988
  • 2.5L L4 2475CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Porsche 944 1989
  • 2.7L L4 2688CC
  • Cutting and Welding Required During Installation
Renault Alliance 1983
  • 1.4L L4 1397CC/85cCID
  • Cutting and Welding Required During Installation
Renault Alliance 1984
  • 1.4L L4 1397CC/85cCID
  • Cutting and Welding Required During Installation
Renault Alliance 1985
  • 1.4L L4 1397CC/85cCID
  • 1.7L L4 105CID
  • 1.4L L4 1397CC
  • Cutting and Welding Required During Installation
Renault Alliance 1986
  • 1.4L L4 1397CC/85cCID
  • 1.7L L4 105CID
  • 1.4L L4 1397CC
  • Cutting and Welding Required During Installation
Renault Alliance 1987
  • 1.4L L4 1397CC/85cCID
  • 1.7L L4 105CID
  • 2L L4 1965CC/120CID
  • Cutting and Welding Required During Installation
Renault Encore 1984
  • 1.4L L4 1397CC/85cCID
  • Cutting and Welding Required During Installation
Renault Encore 1985
  • 1.4L L4 1397CC/85cCID
  • 1.7L L4 105CID
  • 1.4L L4 1397CC
  • Cutting and Welding Required During Installation
Renault Encore 1986
  • 1.4L L4 1397CC/85cCID
  • 1.7L L4 105CID
  • Cutting and Welding Required During Installation
Renault Fuego 1984
  • 2.2L L4 2152CC/131CID
  • Cutting and Welding Required During Installation
Renault Fuego 1985
  • 2.2L L4 2152CC/131CID
  • Cutting and Welding Required During Installation
Saab 900 1994
  • 2.1L L4 2119CC
  • Cutting and Welding Required During Installation
Saturn SC2 1993
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SC2 1994
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SC2 1995
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SL2 1993
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SL2 1994
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SL2 1995
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SW2 1993
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SW2 1994
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SW2 1995
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Subaru DL 1984
  • 4WD
  • 1.8L H4 1781CC
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Subaru DL 1985
  • Rear
  • 4WD
  • 1.8L H4 1781CC
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Subaru DL 1986
  • Rear
  • 4WD
  • 1.8L H4 1781CC
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Subaru DL 1987
  • Rear
  • 4WD
  • 1.8L H4 1781CC
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Subaru DL 1988
  • Rear
  • 4WD
  • 1.8L H4 1781CC
  • Cutting and Welding Required During Installation
Subaru DL 1989
  • Rear
  • 4WD
  • 1.8L H4 1781CC
  • Cutting and Welding Required During Installation
Subaru GL-10 1985
  • Rear
  • 4WD
  • 1.8L H4 1781CC
  • Cutting and Welding Required During Installation
Subaru GL-10 1986
  • Rear
  • 4WD
  • 1.8L H4 1781CC
  • Cutting and Welding Required During Installation
Subaru GL-10 1987
  • Rear
  • 1.8L H4 1781CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Subaru GL-10 1988
  • Rear
  • 4WD
  • 1.8L H4 1781CC
  • Cutting and Welding Required During Installation
Subaru GL-10 1989
  • Rear
  • 1.8L H4 1781CC
  • Cutting and Welding Required During Installation
Subaru GL 1983
  • Rear
  • 1.8L H4 1781CC
  • Cutting and Welding Required During Installation
Subaru GL 1984
  • Rear
  • 1.8L H4 1781CC
  • Cutting and Welding Required During Installation
Subaru GL 1985
  • Rear
  • 1.8L H4 1781CC
  • Cutting and Welding Required During Installation
Subaru GL 1986
  • Rear
  • 1.8L H4 1781CC
  • Cutting and Welding Required During Installation
Subaru GL 1987
  • Rear
  • 1.8L H4 1781CC
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Subaru GL 1988
  • Rear
  • 1.8L H4 1781CC
  • Cutting and Welding Required During Installation
Subaru GL 1989
  • Rear
  • 1.8L H4 1781CC
  • Cutting and Welding Required During Installation
Subaru Impreza 1993
  • Rear
  • 1.8L H4 1781CC
  • Cutting and Welding Required During Installation
Subaru Impreza 1994
  • Rear
  • 1.8L H4 1781CC
  • Cutting and Welding Required During Installation
Subaru Impreza 1995
  • Rear
  • 1.8L H4 1781CC
  • Cutting and Welding Required During Installation
Subaru Impreza 1996
  • Rear
  • 1.8L H4 1781CC
  • Cutting and Welding Required During Installation
Subaru Impreza 1997
  • Rear
  • 1.8L H4 1781CC
  • Cutting and Welding Required During Installation
Subaru Justy 1987
  • 1.2L L3 1189CC
  • Cutting and Welding Required During Installation
Subaru Justy 1988
  • 1.2L L3 1189CC
  • Cutting and Welding Required During Installation
Subaru Justy 1989
  • 1.2L L3 1189CC
  • Cutting and Welding Required During Installation
Subaru Justy 1990
  • 1.2L L3 1189CC
  • Cutting and Welding Required During Installation
Subaru Justy 1991
  • 1.2L L3 1189CC
  • Cutting and Welding Required During Installation
Subaru Justy 1992
  • 1.2L L3 1189CC
  • Cutting and Welding Required During Installation
Subaru Justy 1993
  • 1.2L L3 1189CC
  • Cutting and Welding Required During Installation
Subaru Justy 1994
  • 1.2L L3 1189CC
  • Cutting and Welding Required During Installation
Subaru Legacy 1991
  • Rear
  • 2.2L H4 2212CC
  • Cutting and Welding Required During Installation
Subaru Legacy 1992
  • Rear
  • 2.2L H4 2212CC
  • Cutting and Welding Required During Installation
Subaru Legacy 1993
  • Rear
  • 2.2L H4 2212CC
  • Cutting and Welding Required During Installation
Subaru Legacy 1994
  • Rear
  • 2.2L H4 2212CC
  • Cutting and Welding Required During Installation
Subaru Loyale 1990
  • Rear
  • 1.8L H4 1781CC
  • Cutting and Welding Required During Installation
Subaru Loyale 1991
  • Rear
  • 1.8L H4 1781CC
  • Cutting and Welding Required During Installation
Subaru Loyale 1992
  • Rear
  • 1.8L H4 1781CC
  • Cutting and Welding Required During Installation
Subaru Loyale 1993
  • Rear
  • 1.8L H4 1781CC
  • Cutting and Welding Required During Installation
Subaru Loyale 1994
  • Rear
  • 1.8L H4 1781CC
  • Cutting and Welding Required During Installation
Subaru XT 1985
  • 4WD
  • 1.8L H4 1781CC
  • without Heat Riser
  • Cutting and Welding Required During Installation
Subaru XT 1986
  • Rear
  • 4WD
  • 1.8L H4 1781CC
  • Cutting and Welding Required During Installation
Subaru XT 1987
  • Rear
  • 4WD
  • 1.8L H4 1781CC
  • Cutting and Welding Required During Installation
Subaru XT 1988
  • Rear
  • 4WD
  • 2.7L H6 2672CC
  • Cutting and Welding Required During Installation
Subaru XT 1989
  • 4WD
  • 1.8L H4 1781CC
  • 2.7L H6 2672CC
  • Cutting and Welding Required During Installation
Subaru XT 1990
  • 4WD
  • 1.8L H4 1781CC
  • 2.7L H6 2672CC
  • Cutting and Welding Required During Installation
Subaru XT 1991
  • 4WD
  • 1.8L H4 1781CC
  • 2.7L H6 2672CC
  • Cutting and Welding Required During Installation
Suzuki Esteem 1995
  • Rear
  • 1.6L L4 1590CC/97cCID
  • Cutting and Welding Required During Installation
Suzuki Samurai 1986
  • 1.3L L4 1325CC/81cCID
  • Cutting and Welding Required During Installation
Suzuki Samurai 1987
  • 1.3L L4 1325CC/81cCID
  • Cutting and Welding Required During Installation
Suzuki Samurai 1988
  • 1.3L L4 1325CC/81cCID
  • Cutting and Welding Required During Installation
Suzuki Samurai 1989
  • 1.3L L4 1325CC/81cCID
  • Cutting and Welding Required During Installation
Suzuki Samurai 1990
  • 1.3L L4 1298CC/79cCID
  • Cutting and Welding Required During Installation
Suzuki Samurai 1991
  • 1.3L L4 1298CC/79cCID
  • Cutting and Welding Required During Installation
Suzuki Samurai 1992
  • 1.3L L4 1298CC/79cCID
  • Cutting and Welding Required During Installation
Suzuki Samurai 1993
  • 1.3L L4 1298CC/79cCID
  • Cutting and Welding Required During Installation
Suzuki Samurai 1994
  • 1.3L L4 1298CC/79cCID
  • Cutting and Welding Required During Installation
Suzuki Samurai 1995
  • 1.3L L4 1298CC/79cCID
  • Cutting and Welding Required During Installation
Suzuki Sidekick 1991
  • 1.6L L4 1590CC/97cCID
  • 4
  • Cutting and Welding Required During Installation
Suzuki Sidekick 1992
  • 1.6L L4 1590CC/97cCID
  • 4
  • Cutting and Welding Required During Installation
Suzuki Swift 1989
  • 1.3L L4 1298CC/79cCID
  • Cutting and Welding Required During Installation
Suzuki Swift 1990
  • 1.3L L4 1298CC/79cCID
  • Cutting and Welding Required During Installation
Suzuki Swift 1991
  • 1.3L L4 1298CC/79cCID
  • Cutting and Welding Required During Installation
Suzuki Swift 1992
  • 1.6L L4 1590CC/97cCID
  • 1L L3 993CC/61cCID
  • 1.3L L4 1298CC/79cCID
  • Cutting and Welding Required During Installation
  • CAN
Suzuki Swift 1993
  • 1.3L L4 1298CC/79cCID
  • 1.6L L4 1590CC/97cCID
  • 1L L3 993CC/61cCID
  • Cutting and Welding Required During Installation
  • CAN
Suzuki Swift 1994
  • 1.3L L4 1298CC/79cCID
  • 1L L3 993CC/61cCID
  • Cutting and Welding Required During Installation
  • CAN
Toyota 4Runner 1988
  • 3L V6 2959CC
  • Cutting and Welding Required During Installation
Toyota 4Runner 1989
  • 3L V6 2959CC
  • Cutting and Welding Required During Installation
Toyota 4Runner 1990
  • 3L V6 2959CC
  • Cutting and Welding Required During Installation
Toyota 4Runner 1991
  • 3L V6 2959CC
  • Cutting and Welding Required During Installation
Toyota 4Runner 1992
  • 3L V6 2959CC
  • Cutting and Welding Required During Installation
Toyota 4Runner 1993
  • 3L V6 2959CC
  • Cutting and Welding Required During Installation
Toyota 4Runner 1994
  • 3L V6 2959CC
  • Cutting and Welding Required During Installation
Toyota 4Runner 1995
  • 3L V6 2959CC
  • Cutting and Welding Required During Installation
Toyota Camry 1988
  • 4WD
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Toyota Camry 1989
  • 4WD
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Toyota Camry 1990
  • 4WD
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Toyota Camry 1991
  • 4WD
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Toyota Celica 1990
  • Rear
  • GT
  • GTS
  • 2.2L L4 2164CC
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Toyota Celica 1991
  • Rear
  • GT
  • GTS
  • 2.2L L4 2164CC
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Toyota Celica 1992
  • Rear
  • GT
  • GTS
  • 2.2L L4 2164CC
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Toyota Celica 1993
  • Rear
  • GT
  • GTS
  • 2.2L L4 2164CC
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Toyota Celica 1994
  • Rear
  • 2.2L L4 2164CC
  • Cutting and Welding Required During Installation
Toyota Corolla 1990
  • SR5 All Trac
  • DLX All Trac
  • 1.6L L4 1587CC
  • Cutting and Welding Required During Installation
Toyota MR2 1991
  • Rear
  • 2L L4 1998CC/122CID
  • 2.2L L4 2164CC
  • Cutting and Welding Required During Installation
  • California Emissions Equipped Vehicles Registered Outside Of California
Toyota MR2 1992
  • Rear
  • 2L L4 1998CC/122CID
  • 2.2L L4 2164CC
  • Cutting and Welding Required During Installation
  • California Emissions Equipped Vehicles Registered Outside Of California
Toyota MR2 1993
  • Rear
  • 2L L4 1998CC/122CID
  • 2.2L L4 2164CC
  • Cutting and Welding Required During Installation
  • California Emissions Equipped Vehicles Registered Outside Of California
Toyota MR2 1994
  • Rear
  • 2L L4 1998CC/122CID
  • 2.2L L4 2164CC
  • Cutting and Welding Required During Installation
  • California Emissions Equipped Vehicles Registered Outside Of California
Toyota MR2 1995
  • Rear
  • 2L L4 1998CC/122CID
  • 2.2L L4 2164CC
  • Cutting and Welding Required During Installation
  • California Emissions Equipped Vehicles Registered Outside Of California
Toyota Pickup 1988
  • 3L V6 2959CC
  • Cutting and Welding Required During Installation
Toyota Pickup 1989
  • 3L V6 2959CC
  • Cutting and Welding Required During Installation
Toyota Pickup 1990
  • 3L V6 2959CC
  • Cutting and Welding Required During Installation
Toyota Pickup 1991
  • 3L V6 2959CC
  • Cutting and Welding Required During Installation
Toyota Pickup 1992
  • 3L V6 2959CC
  • Cutting and Welding Required During Installation
Toyota Pickup 1993
  • 3L V6 2959CC
  • Cutting and Welding Required During Installation
Toyota Pickup 1994
  • 3L V6 2959CC
  • Cutting and Welding Required During Installation
Toyota Pickup 1995
  • 3L V6 2959CC
  • Cutting and Welding Required During Installation
Toyota Previa 1994
  • Front
  • Rear
  • 2.4L L4 2438CC
  • Supercharged
  • Cutting and Welding Required During Installation
Toyota Previa 1995
  • Front
  • Rear
  • 2.4L L4 2438CC
  • Supercharged
  • Cutting and Welding Required During Installation
Toyota Tercel 1995
  • 1.5L L4 1497CC
  • Cutting and Welding Required During Installation
Volkswagen EuroVan 1993
  • 2.5L L5 2459CC/150CID
  • Cutting and Welding Required During Installation
Volkswagen EuroVan 1995
  • 2.5L L5 2459CC/150CID
  • Cutting and Welding Required During Installation
Yugo Cabrio 1990
  • 1.3L L4 1301CC
  • Cutting and Welding Required During Installation
Yugo Cabrio 1991
  • 1.3L L4 1301CC
  • Cutting and Welding Required During Installation
Yugo GV 1990
  • 1.3L L4 1301CC
  • Cutting and Welding Required During Installation
Yugo GV 1991
  • 1.3L L4 1301CC
  • Cutting and Welding Required During Installation