100% BASÉ AU CANADA 100% CANADIEN
SANS FRAIS DE COURTAGE EN DOUANE SANS FRAIS DE DOUANE
MARCHAND AUTORISÉ MARCHAND AUTORISÉ
30 JOURS – RETOURS SANS TRACAS 30 JOURS – RETOURS

MagnaFlowStainless Federal Catalytic Converter without Sensor Ports (2.5" IN\/2.5" OUT)

DISTRIBUTEUR AUTORISÉ

94026

Numéro de Pièce du Fabricant
*Les images sont à titre illustratif seulement. Le produit réel peut varier.
SKU: MAG-94026
Sélectionnez un véhicule pour vérifier la compatibilité.

Sélectionnez un Véhicule

Cela servira à vous montrer les pièces compatibles.

Auto Parts Finder

Ce produit n'est pas compatible avec votre sélection!

Le produit affiché sur cette page n'est pas compatible avec vehicle

!
Afin d'assurer la bonne compatibilité des pièces, veuillez parcourir des produits compatibles ou changer votre sélection.


Changer la Sélection Actuelle
Livraison GRATUITE*
Garantie Standard

Commande Spéciale
1-3 Semaines
178,00 CA $
Stainless Federal Catalytic Converter without Sensor Ports (2.5" IN\/2.5" OUT) doit être acheté par multiple de 1
DISTRIBUTEUR AUTORISÉ

94026

Numéro de Pièce du Fabricant
Plus d’information
Fabricant MagnaFlow
Numéro de Pièce du Fabricant 94026
Prix de Détail Suggéré du Fabricant (MSRP) 119,42
Rédigez votre propre commentaire
Seuls les utilisateurs sauvegardés peuvent soumettre leur avis. Veuillez vous connecter ou créer un compte
This table represents all the 67 compatible vehicles for this part:
Marque Modèle Année
Application Notes
Position Drive Type Engine Aspiration Additional Information
Buick Regal 1984
  • 3.8L V6 3800CC/231CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Buick Regal 1985
  • 3.8L V6 3800CC/231CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Buick Regal 1986
  • 3.8L V6 3800CC/231CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Buick Regal 1987
  • 3.8L V6 3800CC/231CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Cadillac Seville 1986
  • 4.1L V8 250CID
  • Cutting and Welding Required During Installation
Cadillac Seville 1987
  • 4.1L V8 250CID
  • Cutting and Welding Required During Installation
Dodge D100 1986
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Dodge D100 1987
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Dodge D100 1988
  • 3.9L V6 3906CC/239CID
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Dodge D100 1989
  • 3.9L V6 3906CC/239CID
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Dodge D150 1982
  • Rear
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Dodge D150 1983
  • Rear
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Dodge D150 1984
  • Rear
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Dodge D150 1985
  • Rear
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Dodge D150 1986
  • Rear
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Dodge D150 1987
  • Rear
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Dodge D150 1988
  • 3.9L V6 3906CC/239CID
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Dodge D150 1989
  • 3.9L V6 3906CC/239CID
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge D150 1990
  • 3.9L V6 3906CC/239CID
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge D150 1991
  • 3.9L V6 3906CC/239CID
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge D250 1981
  • Rear
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Dodge D250 1982
  • Rear
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Dodge D250 1983
  • Rear
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Dodge D250 1984
  • Rear
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Dodge D250 1985
  • Rear
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Dodge D250 1986
  • Rear
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Dodge D250 1987
  • Rear
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Dodge D250 1988
  • 3.9L V6 3906CC/239CID
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Dodge D250 1989
  • 3.9L V6 3906CC/239CID
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge D250 1990
  • 3.9L V6 3906CC/239CID
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
  • Z
Dodge D250 1991
  • 3.9L V6 3906CC/239CID
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
  • Z
Dodge D350 1988
  • 5.9L V8 360CID
  • without Converter (Except Dual Exhaust)
  • Cutting and Welding Required During Installation
Dodge D350 1989
  • 5.9L V8 360CID
  • without Converter (Except Dual Exhaust)
  • Cutting and Welding Required During Installation
Dodge D350 1990
  • 5.9L V8 360CID
  • Z
  • Cutting and Welding Required During Installation
Dodge D350 1991
  • 5.9L V8 360CID
  • Z
  • Cutting and Welding Required During Installation
Dodge Dakota 1989
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Dodge Dakota 1990
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Dodge Dakota 1991
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Dodge Ramcharger 1989
  • RWD
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge Ramcharger 1990
  • RWD
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge Ramcharger 1991
  • RWD
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge W100 1986
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Dodge W100 1987
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Dodge W100 1989
  • 3.9L V6 3906CC/239CID
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Dodge W150 1982
  • Rear
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Dodge W150 1983
  • Rear
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Dodge W150 1984
  • Rear
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Dodge W150 1985
  • Rear
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Dodge W150 1986
  • Rear
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Dodge W150 1987
  • Rear
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Dodge W150 1988
  • Rear
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Dodge W150 1989
  • 3.9L V6 3906CC/239CID
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge W150 1990
  • 3.9L V6 3906CC/239CID
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge W150 1991
  • 3.9L V6 3906CC/239CID
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge W250 1988
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Dodge W250 1989
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge W250 1990
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
  • Z
Dodge W250 1991
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
  • Z
Dodge W350 1988
  • 5.9L V8 360CID
  • without Converter (Except Dual Exhaust)
  • Cutting and Welding Required During Installation
Dodge W350 1989
  • 5.9L V8 360CID
  • without Converter (Except Dual Exhaust)
  • Cutting and Welding Required During Installation
Dodge W350 1990
  • 5.9L V8 360CID
  • Z
  • Cutting and Welding Required During Installation
Dodge W350 1991
  • 5.9L V8 360CID
  • Z
  • Cutting and Welding Required During Installation
Ford Bronco II 1984
  • 2.8L V6 171CID
  • Cutting and Welding Required During Installation
Ford Bronco II 1985
  • 2.8L V6 171CID
  • Cutting and Welding Required During Installation
Ford Ranger 1983
  • 2.8L V6 171CID
  • Cutting and Welding Required During Installation
Ford Ranger 1984
  • 2.8L V6 171CID
  • Cutting and Welding Required During Installation
Ford Ranger 1985
  • 2.8L V6 171CID
  • Cutting and Welding Required During Installation