100% BASÉ AU CANADA 100% CANADIEN
SANS FRAIS DE COURTAGE EN DOUANE SANS FRAIS DE DOUANE
MARCHAND AUTORISÉ MARCHAND AUTORISÉ
30 JOURS – RETOURS SANS TRACAS 30 JOURS – RETOURS

MagnaFlowStainless Federal Heavy Metal Catalytic Converter without Sensor Port (2.25" IN\/2.25" OUT)

DISTRIBUTEUR AUTORISÉ

99205HM

Numéro de Pièce du Fabricant
*Les images sont à titre illustratif seulement. Le produit réel peut varier.
SKU: MAG-99205HM
Sélectionnez un véhicule pour vérifier la compatibilité.

Sélectionnez un Véhicule

Cela servira à vous montrer les pièces compatibles.

Auto Parts Finder

Ce produit n'est pas compatible avec votre sélection!

Le produit affiché sur cette page n'est pas compatible avec vehicle

!
Afin d'assurer la bonne compatibilité des pièces, veuillez parcourir des produits compatibles ou changer votre sélection.


Changer la Sélection Actuelle
Livraison GRATUITE*
Garantie Standard

Commande Spéciale
1-3 Semaines
244,00 CA $
Stainless Federal Heavy Metal Catalytic Converter without Sensor Port (2.25" IN\/2.25" OUT) doit être acheté par multiple de 1
DISTRIBUTEUR AUTORISÉ

99205HM

Numéro de Pièce du Fabricant
Plus d’information
Fabricant MagnaFlow
Numéro de Pièce du Fabricant 99205HM
Prix de Détail Suggéré du Fabricant (MSRP) 150,36
Rédigez votre propre commentaire
Seuls les utilisateurs sauvegardés peuvent soumettre leur avis. Veuillez vous connecter ou créer un compte
This table represents all the 660 compatible vehicles for this part:
Marque Modèle Année
Application Notes
Position Submodel Transmission Body Type Drive Type Engine Aspiration Additional Information
Acura MDX 2003
  • 3.5L V6 3471CC
  • Cutting and Welding Required During Installation
Acura MDX 2004
  • 3.5L V6 3471CC
  • Cutting and Welding Required During Installation
Acura MDX 2005
  • 3.5L V6 3471CC
  • Cutting and Welding Required During Installation
Acura MDX 2006
  • 3.5L V6 3471CC
  • Cutting and Welding Required During Installation
Acura SLX 1998
  • Right
  • Left
  • 3.5L V6 3494CC
  • Cutting and Welding Required During Installation
Acura SLX 1999
  • Right
  • Left
  • 3.5L V6 3494CC
  • Cutting and Welding Required During Installation
Acura TL 1996
  • 3.2L V6 3206CC
  • Cutting and Welding Required During Installation
Acura TL 1997
  • 3.2L V6 3206CC
  • Cutting and Welding Required During Installation
Acura TL 1998
  • 3.2L V6 3206CC
  • Cutting and Welding Required During Installation
Acura TL 2004
  • 3.2L V6 3210CC
  • Cutting and Welding Required During Installation
Acura TL 2005
  • 3.2L V6 3210CC
  • Cutting and Welding Required During Installation
Acura TL 2006
  • 3.2L V6 3210CC
  • Cutting and Welding Required During Installation
Acura TL 2007
  • 3.2L V6 3210CC
  • 3.5L V6 3471CC
  • Cutting and Welding Required During Installation
Acura TL 2008
  • 3.2L V6 3210CC
  • 3.5L V6 3471CC
  • Cutting and Welding Required During Installation
Audi A6 Quattro 2000
  • Left
  • Right
  • 4.2L V8 4172CC
  • Cutting and Welding Required During Installation
Audi A6 Quattro 2001
  • Left
  • Right
  • 4.2L V8 4172CC
  • Cutting and Welding Required During Installation
Audi A6 Quattro 2002
  • Left
  • Right
  • 4.2L V8 4172CC
  • Cutting and Welding Required During Installation
Audi A6 Quattro 2003
  • Left
  • Right
  • 4.2L V8 4172CC
  • Cutting and Welding Required During Installation
Audi A6 Quattro 2004
  • Left
  • Right
  • 4.2L V8 4172CC
  • Cutting and Welding Required During Installation
Audi RS6 2003
  • Right
  • Left
  • 4.2L V8 4172CC
  • Cutting and Welding Required During Installation
Audi RS6 2004
  • Right
  • Left
  • 4.2L V8 4172CC
  • Cutting and Welding Required During Installation
  • CAN
Audi TT 2000
  • 1.8L L4 1781CC
  • Cutting and Welding Required During Installation
Audi TT 2001
  • 1.8L L4 1781CC
  • Cutting and Welding Required During Installation
Audi TT 2002
  • 1.8L L4 1781CC
  • Cutting and Welding Required During Installation
Audi TT 2003
  • 1.8L L4 1781CC
  • Cutting and Welding Required During Installation
Audi TT 2004
  • 1.8L L4 1781CC
  • Cutting and Welding Required During Installation
Audi TT 2005
  • 1.8L L4 1781CC
  • Cutting and Welding Required During Installation
Audi TT 2006
  • 1.8L L4 1781CC
  • Cutting and Welding Required During Installation
BMW 318i 1996
  • 1.9L L4 1895CC
  • Cutting and Welding Required During Installation
BMW 318i 1997
  • 1.9L L4 1895CC
  • Cutting and Welding Required During Installation
BMW 318i 1998
  • 1.9L L4 1895CC
  • Cutting and Welding Required During Installation
BMW 318i 1999
  • 1.9L L4 1895CC
  • Cutting and Welding Required During Installation
  • CAN
BMW 318is 1996
  • 1.9L L4 1895CC
  • Cutting and Welding Required During Installation
BMW 318is 1997
  • 1.9L L4 1895CC
  • Cutting and Welding Required During Installation
BMW 318ti 1996
  • 1.9L L4 1895CC
  • Cutting and Welding Required During Installation
BMW 318ti 1997
  • 1.9L L4 1895CC
  • Cutting and Welding Required During Installation
BMW 318ti 1998
  • 1.9L L4 1895CC
  • Cutting and Welding Required During Installation
BMW 318ti 1999
  • 1.9L L4 1895CC
  • Cutting and Welding Required During Installation
BMW 323i 1998
  • Rear
  • 2.5L L6 2494CC/152CID
  • Cutting and Welding Required During Installation
BMW 323i 1999
  • Rear
  • 2.5L L6 2494CC/152CID
  • Cutting and Welding Required During Installation
BMW 323i 2000
  • Rear
  • 2.5L L6 2494CC/152CID
  • Cutting and Welding Required During Installation
BMW 323is 1998
  • 2.5L L6 2494CC/152CID
  • Cutting and Welding Required During Installation
BMW 323is 1999
  • 2.5L L6 2494CC/152CID
  • Cutting and Welding Required During Installation
BMW 325Ci 2003
  • Rear Left
  • Rear Right
  • 2.5L L6 2494CC/152CID
  • Cutting and Welding Required During Installation
BMW 325i 2003
  • Rear Left
  • Rear Right
  • 2.5L L6 2494CC/152CID
  • Cutting and Welding Required During Installation
BMW 325i 2004
  • Rear Left
  • Rear Right
  • 2.5L L6 2494CC/152CID
  • Cutting and Welding Required During Installation
BMW 325i 2005
  • Rear Left
  • Rear Right
  • 2.5L L6 2494CC/152CID
  • Cutting and Welding Required During Installation
BMW 328i 1996
  • Rear
  • 2.8L L6 2793CC
  • Cutting and Welding Required During Installation
BMW 328i 1997
  • Left
  • 2.8L L6 2793CC
  • Cutting and Welding Required During Installation
BMW 328i 1998
  • Left
  • 2.8L L6 2793CC
  • Cutting and Welding Required During Installation
BMW 328i 1999
  • Left
  • Right
  • 2.8L L6 2793CC
  • Cutting and Welding Required During Installation
BMW 328i 2000
  • Rear
  • 2.8L L6 2793CC
  • Cutting and Welding Required During Installation
BMW 328is 1996
  • Left
  • Right
  • 2.8L L6 2793CC
  • Cutting and Welding Required During Installation
BMW 328is 1997
  • Left
  • Right
  • 2.8L L6 2793CC
  • Cutting and Welding Required During Installation
BMW 328is 1998
  • Right
  • Left
  • 2.8L L6 2793CC
  • Cutting and Welding Required During Installation
BMW 328is 1999
  • Left
  • Right
  • 2.8L L6 2793CC
  • Cutting and Welding Required During Installation
BMW 335i 2011
  • Rear Left
  • Rear Right
  • 3L L6 2979CC
  • Cutting and Welding Required During Installation
BMW 335i 2012
  • Rear Left
  • Rear Right
  • 3L L6 2979CC
  • Cutting and Welding Required During Installation
BMW 335i 2013
  • Rear Left
  • Rear Right
  • 3L L6 2979CC
  • Cutting and Welding Required During Installation
BMW 750iL 1996
  • Left
  • Right
  • 5.4L V12 5379CC
  • Cutting and Welding Required During Installation
BMW 750iL 1997
  • Left
  • Right
  • 5.4L V12 5379CC
  • Cutting and Welding Required During Installation
BMW 750iL 1998
  • Left
  • Right
  • 5.4L V12 5379CC
  • Cutting and Welding Required During Installation
BMW 840Ci 1996
  • Left
  • Right
  • 4.4L V8 4398CC
  • Cutting and Welding Required During Installation
BMW 840Ci 1997
  • Left
  • Right
  • 4.4L V8 4398CC
  • Cutting and Welding Required During Installation
BMW M3 1996
  • 3.2L L6 3152CC
  • Cutting and Welding Required During Installation
BMW M3 1997
  • 3.2L L6 3152CC
  • Cutting and Welding Required During Installation
BMW M3 1998
  • 3.2L L6 3152CC
  • Cutting and Welding Required During Installation
BMW M3 1999
  • 3.2L L6 3152CC
  • Cutting and Welding Required During Installation
BMW X5 2007
  • Right
  • Left
  • 3L L6 2996CC
  • Cutting and Welding Required During Installation
BMW X5 2008
  • Right
  • Left
  • 3L L6 2996CC
  • Cutting and Welding Required During Installation
BMW X5 2009
  • Left
  • Right
  • 3L L6 2996CC
  • GAS
  • Cutting and Welding Required During Installation
BMW X5 2010
  • Right
  • Left
  • 3L L6 2996CC
  • GAS
  • Cutting and Welding Required During Installation
Buick Rendezvous 2004
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Buick Rendezvous 2005
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Buick Rendezvous 2006
  • FWD
  • 3.5L V6 213CID
  • Cutting and Welding Required During Installation
Buick Rendezvous 2007
  • FWD
  • 3.5L V6 213CID
  • Cutting and Welding Required During Installation
Buick Skylark 1996
  • 2.4L L4 2392CC/146CID
  • Cutting and Welding Required During Installation
Buick Skylark 1997
  • 2.4L L4 2392CC/146CID
  • Cutting and Welding Required During Installation
Buick Skylark 1998
  • 2.4L L4 2392CC/146CID
  • Cutting and Welding Required During Installation
Cadillac CTS 2003
  • Right
  • Left
  • 3.2L V6 197CID
  • Cutting and Welding Required During Installation
Cadillac CTS 2004
  • Right
  • Left
  • 3.2L V6 197CID
  • Cutting and Welding Required During Installation
Cadillac Fleetwood 1996
  • Left
  • Right
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet Malibu 2005
  • Rear
  • 3.5L V6 213CID
  • Cutting and Welding Required During Installation
Chevrolet Malibu 2006
  • Rear
  • 3.5L V6 213CID
  • 3.9L V6 3880CC/237CID
  • Cutting and Welding Required During Installation
Chevrolet Malibu 2007
  • 3.9L V6 3880CC/237CID
  • Cutting and Welding Required During Installation
Chevrolet S10 1996
  • 2.2L L4 2190CC/134CID
  • Cutting and Welding Required During Installation
Chevrolet S10 1997
  • 2.2L L4 2190CC/134CID
  • Cutting and Welding Required During Installation
Chevrolet S10 1998
  • 2.2L L4 2190CC/134CID
  • Cutting and Welding Required During Installation
Chevrolet S10 1999
  • 2.2L L4 2190CC/134CID
  • Cutting and Welding Required During Installation
Chevrolet S10 2000
  • 2.2L L4 2190CC/134CID
  • Cutting and Welding Required During Installation
Chevrolet S10 2001
  • 2.2L L4 2190CC/134CID
  • Cutting and Welding Required During Installation
Chevrolet S10 2002
  • 2.2L L4 2190CC/134CID
  • Cutting and Welding Required During Installation
Chevrolet S10 2003
  • 2.2L L4 2190CC/134CID
  • Cutting and Welding Required During Installation
Chrysler 300M 1999
  • Left
  • Right
  • 3.5L V6 3497CC/215CID
  • Cutting and Welding Required During Installation
Chrysler 300M 2000
  • Left
  • Right
  • 3.5L V6 3497CC/215CID
  • Cutting and Welding Required During Installation
Chrysler 300M 2001
  • Left
  • Right
  • 3.5L V6 3497CC/215CID
  • Cutting and Welding Required During Installation
Chrysler 300M 2002
  • Left
  • Right
  • Special
  • Base
  • 3.5L V6 3497CC/215CID
  • Cutting and Welding Required During Installation
Chrysler 300M 2003
  • Left
  • Right
  • Special
  • Pro-Am
  • Base
  • 3.5L V6 3497CC/215CID
  • Cutting and Welding Required During Installation
Chrysler 300M 2004
  • Left
  • Right
  • Special
  • Base
  • 3.5L V6 3497CC/215CID
  • Cutting and Welding Required During Installation
Chrysler Cirrus 2000
  • 2.4L L4 2429CC/148CID
  • 2L L4 1996CC/122CID
  • Cutting and Welding Required During Installation
Chrysler Concorde 1998
  • Left
  • Right
  • 2.7L V6 2700CC/167CID
  • 3.2L V6 3200CC/197CID
  • Cutting and Welding Required During Installation
Chrysler Concorde 1999
  • Left
  • Right
  • 2.7L V6 2700CC/167CID
  • 3.2L V6 3200CC/197CID
  • Cutting and Welding Required During Installation
Chrysler Concorde 2000
  • Left
  • Right
  • 2.7L V6 2700CC/167CID
  • 3.2L V6 3200CC/197CID
  • Cutting and Welding Required During Installation
Chrysler Concorde 2001
  • Left
  • Right
  • 2.7L V6 2700CC/167CID
  • 3.2L V6 3200CC/197CID
  • Cutting and Welding Required During Installation
Chrysler Concorde 2002
  • Right
  • Left
  • 3.5L V6 3497CC/215CID
  • 2.7L V6 2700CC/167CID
  • Cutting and Welding Required During Installation
Chrysler Concorde 2003
  • Right
  • Left
  • 3.5L V6 3497CC/215CID
  • 2.7L V6 2700CC/167CID
  • Cutting and Welding Required During Installation
Chrysler Concorde 2004
  • Right
  • Left
  • 3.5L V6 3497CC/215CID
  • 2.7L V6 2700CC/167CID
  • Cutting and Welding Required During Installation
Chrysler Intrepid 1996
  • Front Left
  • Front Right
  • 3.5L V6 3497CC/215CID
  • Cutting and Welding Required During Installation
  • CAN
Chrysler Intrepid 1997
  • Front Right
  • Front Left
  • 3.5L V6 3497CC/215CID
  • Cutting and Welding Required During Installation
  • CAN
Chrysler Intrepid 1998
  • Right
  • Left
  • 2.7L V6 2700CC/167CID
  • 3.2L V6 3200CC/197CID
  • Cutting and Welding Required During Installation
  • CAN
Chrysler Intrepid 1999
  • Right
  • Left
  • 2.7L V6 2700CC/167CID
  • 3.2L V6 3200CC/197CID
  • Cutting and Welding Required During Installation
  • CAN
Chrysler Intrepid 2000
  • Right
  • Left
  • 2.7L V6 2700CC/167CID
  • 3.2L V6 3200CC/197CID
  • 3.5L V6 3497CC/215CID
  • Cutting and Welding Required During Installation
  • CAN
Chrysler Intrepid 2001
  • Right
  • Left
  • 2.7L V6 2700CC/167CID
  • 3.2L V6 3200CC/197CID
  • 3.5L V6 3497CC/215CID
  • Cutting and Welding Required During Installation
  • CAN
Chrysler Intrepid 2002
  • Right
  • Left
  • 2.7L V6 2700CC/167CID
  • 3.5L V6 3497CC/215CID
  • Cutting and Welding Required During Installation
  • CAN
Chrysler Intrepid 2003
  • Right
  • Left
  • 2.7L V6 2700CC/167CID
  • 3.5L V6 3497CC/215CID
  • Cutting and Welding Required During Installation
  • CAN
Chrysler Intrepid 2004
  • Right
  • Left
  • 2.7L V6 2700CC/167CID
  • 3.5L V6 3497CC/215CID
  • Cutting and Welding Required During Installation
  • CAN
Chrysler LHS 1999
  • Left
  • Right
  • 3.5L V6 3497CC/215CID
  • Cutting and Welding Required During Installation
Chrysler LHS 2000
  • Left
  • Right
  • 3.5L V6 3497CC/215CID
  • Cutting and Welding Required During Installation
Chrysler LHS 2001
  • Left
  • Right
  • 3.5L V6 3497CC/215CID
  • Cutting and Welding Required During Installation
Chrysler Sebring 1997
  • Rear
  • Coupe
  • 2.5L V6 2497CC/152CID
  • Cutting and Welding Required During Installation
Chrysler Sebring 1998
  • Rear
  • Coupe
  • 2.5L V6 2497CC/152CID
  • Cutting and Welding Required During Installation
Chrysler Sebring 1999
  • Rear
  • Coupe
  • 2.5L V6 2497CC/152CID
  • Cutting and Welding Required During Installation
Chrysler Sebring 2000
  • Rear
  • Coupe
  • 2.5L V6 2497CC/152CID
  • Cutting and Welding Required During Installation
Dodge Avenger 1996
  • Rear
  • 2.5L V6 2497CC/152CID
  • Cutting and Welding Required During Installation
Dodge Avenger 1997
  • Rear
  • 2.5L V6 2497CC/152CID
  • Cutting and Welding Required During Installation
Dodge Avenger 1998
  • Rear
  • 2.5L V6 2497CC/152CID
  • Cutting and Welding Required During Installation
Dodge Avenger 1999
  • Rear
  • 2.5L V6 2497CC/152CID
  • Cutting and Welding Required During Installation
Dodge Avenger 2000
  • Rear
  • 2.5L V6 2497CC/152CID
  • Cutting and Welding Required During Installation
Dodge Intrepid 1998
  • Left
  • Right
  • 2.7L V6 2700CC/167CID
  • 3.2L V6 3200CC/197CID
  • Cutting and Welding Required During Installation
Dodge Intrepid 1999
  • Left
  • Right
  • 2.7L V6 2700CC/167CID
  • 3.2L V6 3200CC/197CID
  • Cutting and Welding Required During Installation
Dodge Intrepid 2000
  • Left
  • Right
  • 3.5L V6 3497CC/215CID
  • 2.7L V6 2700CC/167CID
  • 3.2L V6 3200CC/197CID
  • Cutting and Welding Required During Installation
Dodge Intrepid 2001
  • Left
  • Right
  • 3.5L V6 3497CC/215CID
  • 2.7L V6 2700CC/167CID
  • Cutting and Welding Required During Installation
Dodge Intrepid 2002
  • Left
  • Right
  • 3.5L V6 3497CC/215CID
  • 2.7L V6 2700CC/167CID
  • Cutting and Welding Required During Installation
Dodge Intrepid 2003
  • Left
  • Right
  • 3.5L V6 3497CC/215CID
  • 2.7L V6 2700CC/167CID
  • Cutting and Welding Required During Installation
Dodge Intrepid 2004
  • Left
  • Right
  • 3.5L V6 3497CC/215CID
  • 2.7L V6 2700CC/167CID
  • Cutting and Welding Required During Installation
Dodge Ram 2500 Pickup 2007
  • Right
  • Left
  • 5.7L V8 345CID
  • Cutting and Welding Required During Installation
Dodge Stratus 1998
  • 2.4L L4 2429CC/148CID
  • 2L L4 1996CC/122CID
  • Cutting and Welding Required During Installation
Dodge Stratus 1999
  • 2.4L L4 2429CC/148CID
  • 2L L4 1996CC/122CID
  • Cutting and Welding Required During Installation
Dodge Stratus 2000
  • 2.4L L4 2429CC/148CID
  • 2L L4 1996CC/122CID
  • Cutting and Welding Required During Installation
Eagle Summit 1996
  • Sedan
  • 1.8L L4 1834CC/112CID
  • Cutting and Welding Required During Installation
Eagle Talon 1995
  • 2L L4 1997CC/122CID
  • 2L L4 1996CC/122CID
  • Cutting and Welding Required During Installation
Eagle Talon 1996
  • 2L L4 1997CC/122CID
  • 2L L4 1996CC/122CID
  • Cutting and Welding Required During Installation
Eagle Talon 1997
  • 2L L4 1997CC/122CID
  • 2L L4 1996CC/122CID
  • Cutting and Welding Required During Installation
Eagle Talon 1998
  • 2L L4 1997CC/122CID
  • 2L L4 1996CC/122CID
  • Cutting and Welding Required During Installation
Ford E-150 Club Wagon 2005
  • Left
  • Right
  • 4.6L V8 281CID
  • 5.4L V8 330CID
  • Cutting and Welding Required During Installation
Ford E-350 Super Duty 2007
  • 6.8L V10 415CID
  • Cutting and Welding Required During Installation
Ford E-350 Super Duty 2008
  • 5.4L V8 330CID
  • 6.8L V10 415CID
  • Cutting and Welding Required During Installation
Ford E-150 2005
  • Left
  • Right
  • 4.6L V8 281CID
  • 5.4L V8 330CID
  • Cutting and Welding Required During Installation
Ford E-150 2006
  • Right
  • Left
  • 4.6L V8 281CID
  • 5.4L V8 330CID
  • Cutting and Welding Required During Installation
Ford E-150 2007
  • Left
  • Right
  • 4.6L V8 281CID
  • 5.4L V8 330CID
  • Cutting and Welding Required During Installation
Ford E-150 2008
  • 5.4L V8 330CID
  • Cutting and Welding Required During Installation
Ford E-250 2008
  • 5.4L V8 330CID
  • Cutting and Welding Required During Installation
Ford Escort 1998
  • 2L L4 1989CC/121CID
  • 3
  • Cutting and Welding Required During Installation
Ford Escort 1999
  • 2L L4 1989CC/121CID
  • 3
  • Cutting and Welding Required During Installation
Ford Escort 2000
  • 2L L4 1989CC/121CID
  • 3
  • Cutting and Welding Required During Installation
Ford Escort 2001
  • 2L L4 1989CC/121CID
  • 3
  • Cutting and Welding Required During Installation
Ford Escort 2002
  • 2L L4 1989CC/121CID
  • Cutting and Welding Required During Installation
Ford Escort 2003
  • 2L L4 1989CC/121CID
  • Cutting and Welding Required During Installation
Ford Ranger 2000
  • Front
  • 2.5L L4 153CID
  • Cutting and Welding Required During Installation
Ford Ranger 2001
  • Front
  • 2.5L L4 153CID
  • Cutting and Welding Required During Installation
Ford Taurus 1996
  • SHO
  • 3.4L V8 207CID
  • Cutting and Welding Required During Installation
Ford Taurus 1997
  • SHO
  • 3.4L V8 207CID
  • Cutting and Welding Required During Installation
Ford Taurus 1998
  • SHO
  • 3.4L V8 207CID
  • Cutting and Welding Required During Installation
Ford Taurus 1999
  • SHO
  • 3.4L V8 207CID
  • Cutting and Welding Required During Installation
Ford Thunderbird 1996
  • Front Left
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Ford Thunderbird 1997
  • Front Left
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
GMC Savana 2500 2000
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Honda Accord 2003
  • 3L V6 2997CC
  • Cutting and Welding Required During Installation
Honda Accord 2004
  • 3L V6 2997CC
  • Cutting and Welding Required During Installation
Honda Accord 2005
  • 3L V6 2997CC
  • GAS
  • Cutting and Welding Required During Installation
Honda Accord 2006
  • 3L V6 2997CC
  • Cutting and Welding Required During Installation
Honda Accord 2007
  • 3L V6 2997CC
  • Cutting and Welding Required During Installation
Honda Insight 2000
  • 1L L3 995CC/61cCID
  • Cutting and Welding Required During Installation
Honda Insight 2001
  • 1L L3 995CC/61cCID
  • Cutting and Welding Required During Installation
Honda Insight 2002
  • 1L L3 995CC/61cCID
  • Cutting and Welding Required During Installation
Honda Insight 2003
  • 1L L3 995CC/61cCID
  • Cutting and Welding Required During Installation
Honda Insight 2004
  • 1L L3 995CC/61cCID
  • Cutting and Welding Required During Installation
Honda Insight 2005
  • 1L L3 995CC/61cCID
  • Cutting and Welding Required During Installation
Honda Insight 2006
  • 1L L3 995CC/61cCID
  • Cutting and Welding Required During Installation
Honda Odyssey 2005
  • Rear
  • 3.5L V6 3471CC
  • Cutting and Welding Required During Installation
Honda Odyssey 2006
  • Rear
  • 3.5L V6 3471CC
  • Cutting and Welding Required During Installation
Honda Odyssey 2007
  • Rear
  • 3.5L V6 3471CC
  • Cutting and Welding Required During Installation
Honda Odyssey 2008
  • Rear
  • EX
  • EX-L
  • LX
  • Touring
  • 3.5L V6 3471CC
  • Cutting and Welding Required During Installation
Honda Odyssey 2009
  • Rear
  • EX
  • EX-L
  • LX
  • Touring
  • 3.5L V6 3471CC
  • Cutting and Welding Required During Installation
Honda Odyssey 2010
  • Rear
  • EX
  • EX-L
  • LX
  • Touring
  • 3.5L V6 3471CC
  • Cutting and Welding Required During Installation
Honda Passport 1996
  • Left
  • Right
  • Automatic
  • 3.2L V6 3165CC
  • Cutting and Welding Required During Installation
Honda Passport 1997
  • Left
  • Right
  • Automatic
  • 3.2L V6 3165CC
  • Cutting and Welding Required During Installation
Honda Passport 1998
  • Left
  • Right
  • 3.2L V6 3165CC
  • Cutting and Welding Required During Installation
Honda Passport 1999
  • Left
  • Right
  • 3.2L V6 3165CC
  • Cutting and Welding Required During Installation
Honda Pilot 2005
  • Rear
  • 3.5L V6 3471CC
  • Cutting and Welding Required During Installation
Honda Pilot 2006
  • Rear
  • 3.5L V6 3471CC
  • Cutting and Welding Required During Installation
Honda Pilot 2007
  • Rear
  • 3.5L V6 3471CC
  • Cutting and Welding Required During Installation
Honda Pilot 2008
  • Rear
  • 3.5L V6 3471CC
  • Cutting and Welding Required During Installation
Honda Ridgeline 2006
  • Rear
  • 3.5L V6 3471CC
  • Cutting and Welding Required During Installation
Honda Ridgeline 2007
  • Rear
  • 3.5L V6 3471CC
  • Cutting and Welding Required During Installation
Honda Ridgeline 2008
  • Rear
  • 3.5L V6 3471CC
  • Cutting and Welding Required During Installation
Hyundai Accent 2006
  • 1.6L L4 1599CC
  • Cutting and Welding Required During Installation
Hyundai Accent 2007
  • 1.6L L4 1599CC
  • Cutting and Welding Required During Installation
Hyundai Accent 2008
  • 1.6L L4 1599CC
  • Cutting and Welding Required During Installation
Hyundai Accent 2009
  • 1.6L L4 1599CC
  • Cutting and Welding Required During Installation
Hyundai Accent 2010
  • 1.6L L4 1599CC
  • Cutting and Welding Required During Installation
Infiniti G35 2003
  • Rear Right
  • Left
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Infiniti G35 2004
  • Rear Right
  • Left
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Infiniti G35 2005
  • Rear Right
  • Left
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Infiniti G35 2006
  • Rear Right
  • Left
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Infiniti J30 1996
  • Left
  • Right
  • 3L V6 2960CC/181CID
  • Cutting and Welding Required During Installation
Infiniti J30 1997
  • Left
  • Right
  • 3L V6 2960CC/181CID
  • Cutting and Welding Required During Installation
Isuzu Amigo 1998
  • Left
  • 2.2L L4 2180CC
  • 3.2L V6 3165CC
  • Cutting and Welding Required During Installation
Isuzu Amigo 1999
  • Left
  • 2.2L L4 2180CC
  • 3.2L V6 3165CC
  • Cutting and Welding Required During Installation
Isuzu Amigo 2000
  • Left
  • 2.2L L4 2180CC
  • 3.2L V6 3165CC
  • Cutting and Welding Required During Installation
Isuzu Hombre 1996
  • 2.2L L4 2190CC/134CID
  • Cutting and Welding Required During Installation
Isuzu Hombre 1997
  • 2.2L L4 2190CC/134CID
  • Cutting and Welding Required During Installation
Isuzu Hombre 1998
  • 2.2L L4 2190CC/134CID
  • Cutting and Welding Required During Installation
Isuzu Hombre 1999
  • 2.2L L4 2190CC/134CID
  • Cutting and Welding Required During Installation
Isuzu Hombre 2000
  • 2.2L L4 2190CC/134CID
  • Cutting and Welding Required During Installation
Isuzu Rodeo 1996
  • Left
  • Right
  • Automatic
  • 3.2L V6 3165CC
  • Cutting and Welding Required During Installation
Isuzu Rodeo 1997
  • Left
  • Right
  • Automatic
  • 3.2L V6 3165CC
  • Cutting and Welding Required During Installation
Isuzu Rodeo 1998
  • Left
  • Right
  • 2.2L L4 2180CC
  • 3.2L V6 3165CC
  • Cutting and Welding Required During Installation
Isuzu Rodeo 1999
  • Left
  • Right
  • 2.2L L4 2180CC
  • 3.2L V6 3165CC
  • Cutting and Welding Required During Installation
Isuzu Rodeo 2000
  • Right
  • Left
  • Automatic
  • 2.2L L4 2180CC
  • 3.2L V6 3165CC
  • Cutting and Welding Required During Installation
Isuzu Rodeo 2001
  • Rear
  • Right
  • Left
  • Automatic
  • 2.2L L4 2180CC
  • 3.2L V6 3165CC
  • Cutting and Welding Required During Installation
Isuzu Rodeo 2002
  • Rear
  • Right
  • Left
  • Automatic
  • 2.2L L4 2180CC
  • 3.2L V6 3165CC
  • Cutting and Welding Required During Installation
Isuzu Rodeo 2003
  • Rear
  • Right
  • Left
  • 2.2L L4 2180CC
  • 3.2L V6 3165CC
  • Cutting and Welding Required During Installation
Isuzu Rodeo 2004
  • Left
  • Right
  • 3.2L V6 3165CC
  • Cutting and Welding Required During Installation
Isuzu Rodeo Sport 2001
  • Rear
  • Right
  • Left
  • Automatic
  • 2.2L L4 2180CC
  • 3.2L V6 3165CC
  • Cutting and Welding Required During Installation
Isuzu Rodeo Sport 2002
  • Rear
  • Right
  • Left
  • Automatic
  • 2.2L L4 2180CC
  • 3.2L V6 3165CC
  • Cutting and Welding Required During Installation
Isuzu Rodeo Sport 2003
  • Rear
  • Right
  • Left
  • Automatic
  • 2.2L L4 2180CC
  • 3.2L V6 3165CC
  • Cutting and Welding Required During Installation
Isuzu Trooper 1996
  • Left
  • Automatic
  • 3.2L V6 3165CC
  • Cutting and Welding Required During Installation
Isuzu Trooper 1997
  • Left
  • Automatic
  • 3.2L V6 3165CC
  • Cutting and Welding Required During Installation
Isuzu Trooper 1998
  • Left
  • Right
  • Automatic
  • 3.5L V6 3475CC
  • Cutting and Welding Required During Installation
Isuzu Trooper 1999
  • Left
  • Right
  • Automatic
  • 3.5L V6 3475CC
  • Cutting and Welding Required During Installation
Kia Rio 2006
  • 1.6L L4 1599CC
  • Cutting and Welding Required During Installation
Kia Rio 2007
  • 1.6L L4 1599CC
  • Cutting and Welding Required During Installation
Kia Rio 2008
  • 1.6L L4 1599CC
  • Cutting and Welding Required During Installation
Kia Rio 2009
  • 1.6L L4 1599CC
  • Cutting and Welding Required During Installation
Kia Rio 2010
  • 1.6L L4 1599CC
  • Cutting and Welding Required During Installation
Kia Rio5 2006
  • 1.6L L4 1599CC
  • Cutting and Welding Required During Installation
Kia Rio5 2007
  • 1.6L L4 1599CC
  • Cutting and Welding Required During Installation
Kia Rio5 2008
  • 1.6L L4 1599CC
  • Cutting and Welding Required During Installation
Kia Rio5 2009
  • 1.6L L4 1599CC
  • Cutting and Welding Required During Installation
Land Rover Range Rover 2003
  • Left
  • Right
  • 4.4L V8 4398CC
  • Cutting and Welding Required During Installation
Land Rover Range Rover 2004
  • Left
  • Right
  • 4.4L V8 4398CC
  • Cutting and Welding Required During Installation
Land Rover Range Rover 2005
  • Left
  • Right
  • 4.4L V8 4398CC
  • Cutting and Welding Required During Installation
Land Rover Range Rover 2006
  • Left
  • Right
  • HSE
  • 4.4L V8 4394CC
  • Cutting and Welding Required During Installation
Land Rover Range Rover 2007
  • Left
  • Right
  • HSE
  • 4.4L V8 4394CC
  • Cutting and Welding Required During Installation
Land Rover Range Rover 2008
  • Left
  • Right
  • HSE
  • 4.4L V8 4394CC
  • Cutting and Welding Required During Installation
Lexus ES300 1996
  • 3L V6 2995CC
  • Cutting and Welding Required During Installation
Lexus ES300 1997
  • 3L V6 2995CC
  • Cutting and Welding Required During Installation
Lexus ES300 1998
  • 3L V6 2995CC
  • Cutting and Welding Required During Installation
Lexus ES300 2002
  • 3L V6 2995CC
  • Cutting and Welding Required During Installation
Lexus ES300 2003
  • 3L V6 2995CC
  • Cutting and Welding Required During Installation
Lexus ES330 2004
  • 3.3L V6 3300CC/202CID
  • Cutting and Welding Required During Installation
Lexus ES330 2005
  • 3.3L V6 3300CC/202CID
  • Cutting and Welding Required During Installation
Lexus ES330 2006
  • 3.3L V6 3300CC/202CID
  • Cutting and Welding Required During Installation
Lexus GS350 2007
  • Rear Right
  • Rear Left
  • 3.5L V6 3456CC
  • Cutting and Welding Required During Installation
Lexus GS350 2008
  • Rear Right
  • Rear Left
  • 3.5L V6 3456CC
  • Cutting and Welding Required During Installation
Lexus GS350 2009
  • Rear Left
  • Rear Right
  • 3.5L V6 3456CC
  • Cutting and Welding Required During Installation
Lexus GS350 2010
  • Rear Left
  • Rear Right
  • 3.5L V6 3456CC
  • Cutting and Welding Required During Installation
Lexus GS350 2011
  • Rear Right
  • Rear Left
  • 3.5L V6 3456CC
  • Cutting and Welding Required During Installation
Lexus GS350 2013
  • Rear Right
  • Rear Left
  • 3.5L V6 3456CC
  • Cutting and Welding Required During Installation
Lexus GS350 2014
  • Rear Right
  • Rear Left
  • 3.5L V6 3456CC
  • Cutting and Welding Required During Installation
Lexus GS350 2015
  • Rear Left
  • Rear Right
  • 3.5L V6 3456CC
  • Cutting and Welding Required During Installation
Lexus GX470 2005
  • Left
  • Right
  • 4.7L V8 4663CC/285CID
  • Cutting and Welding Required During Installation
Lexus GX470 2006
  • Left
  • Right
  • 4.7L V8 4663CC/285CID
  • Cutting and Welding Required During Installation
Lexus GX470 2007
  • Left
  • Right
  • 4.7L V8 4663CC/285CID
  • Cutting and Welding Required During Installation
Lexus IS250 2006
  • Rear Left
  • RWD
  • 2.5L V6 2499CC
  • Cutting and Welding Required During Installation
Lexus IS250 2007
  • Rear Left
  • RWD
  • 2.5L V6 2499CC
  • Cutting and Welding Required During Installation
Lexus IS250 2008
  • Rear Left
  • RWD
  • 2.5L V6 2499CC
  • Cutting and Welding Required During Installation
Lexus IS250 2010
  • Rear Left
  • Rear Right
  • 2.5L V6 2499CC
  • Cutting and Welding Required During Installation
Lexus IS250 2011
  • Rear Right
  • Rear Left
  • 2.5L V6 2499CC
  • Cutting and Welding Required During Installation
Lexus IS250 2012
  • Rear Left
  • Rear Right
  • 2.5L V6 2499CC
  • Cutting and Welding Required During Installation
Lexus IS250 2014
  • Rear Right
  • Rear Left
  • 2.5L V6 2499CC
  • Cutting and Welding Required During Installation
Lexus IS250 2015
  • Rear Left
  • Rear Right
  • 2.5L V6 2499CC
  • Cutting and Welding Required During Installation
Lexus IS350 2006
  • Rear Left
  • RWD
  • 3.5L V6 3456CC
  • Cutting and Welding Required During Installation
Lexus IS350 2007
  • Rear Left
  • RWD
  • 3.5L V6 3456CC
  • Cutting and Welding Required During Installation
Lexus IS350 2008
  • Rear Left
  • RWD
  • 3.5L V6 3456CC
  • Cutting and Welding Required During Installation
Lexus LS460 2007
  • Rear Right
  • Rear Left
  • 4.6L V8 4608CC
  • Cutting and Welding Required During Installation
Lexus LS460 2008
  • Rear Right
  • Rear Left
  • 4.6L V8 4608CC
  • Cutting and Welding Required During Installation
Lexus LS460 2009
  • Rear Left
  • Rear Right
  • 4.6L V8 4608CC
  • Cutting and Welding Required During Installation
Lexus LS460 2010
  • Rear Left
  • Rear Right
  • 4.6L V8 4608CC
  • Cutting and Welding Required During Installation
Lexus LS460 2011
  • Rear Right
  • Rear Left
  • 4.6L V8 4608CC
  • Cutting and Welding Required During Installation
Lexus LS460 2012
  • Rear Left
  • Rear Right
  • 4.6L V8 4608CC
  • Cutting and Welding Required During Installation
Lexus LS460 2013
  • Rear Left
  • Rear Right
  • 4.6L V8 4608CC
  • Cutting and Welding Required During Installation
Lexus LS460 2014
  • Rear Left
  • Rear Right
  • 4.6L V8 4608CC
  • Cutting and Welding Required During Installation
Lexus LS460 2015
  • Rear Left
  • Rear Right
  • 4.6L V8 4608CC
  • Cutting and Welding Required During Installation
Lexus LX470 1998
  • Right
  • Left
  • 4.7L V8 4663CC/285CID
  • Cutting and Welding Required During Installation
Lexus LX470 1999
  • Right
  • Left
  • 4.7L V8 4663CC/285CID
  • Cutting and Welding Required During Installation
Lexus LX470 2000
  • Right
  • Left
  • 4.7L V8 4663CC/285CID
  • Cutting and Welding Required During Installation
Lexus LX470 2001
  • Right
  • Left
  • 4.7L V8 4663CC/285CID
  • Cutting and Welding Required During Installation
Lexus LX470 2002
  • Right
  • Left
  • 4.7L V8 4663CC/285CID
  • Cutting and Welding Required During Installation
Lexus LX470 2003
  • Right
  • Left
  • 4.7L V8 4663CC/285CID
  • Cutting and Welding Required During Installation
Lexus LX470 2004
  • Left
  • Right
  • 4.7L V8 4663CC/285CID
  • Cutting and Welding Required During Installation
Lexus RX300 1999
  • Front
  • 3L V6 2995CC
  • Cutting and Welding Required During Installation
Lexus RX300 2000
  • Front
  • 3L V6 2995CC
  • Cutting and Welding Required During Installation
Lexus RX300 2001
  • Front
  • 3L V6 2995CC
  • Cutting and Welding Required During Installation
Lexus RX300 2002
  • Left
  • 3L V6 2995CC
  • Cutting and Welding Required During Installation
Lexus RX300 2003
  • Front
  • 3L V6 2995CC
  • Cutting and Welding Required During Installation
Mazda 3 2010
  • 2L L4 2000CC/122CID
  • 2.5L L4 2488CC/152CID
  • Cutting and Welding Required During Installation
Mazda 3 2011
  • 2L L4 2000CC/122CID
  • 2.5L L4 2488CC/152CID
  • Cutting and Welding Required During Installation
Mazda 3 2012
  • 2L L4 2000CC/122CID
  • 2.5L L4 2488CC/152CID
  • Cutting and Welding Required During Installation
Mazda 3 2013
  • 2L L4 2000CC/122CID
  • 2.5L L4 2488CC/152CID
  • Cutting and Welding Required During Installation
Mazda 6 2006
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Mazda 6 2007
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Mazda 6 2008
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Mercedes-Benz C280 1998
  • Front Left
  • 2.8L V6 2799CC
  • Cutting and Welding Required During Installation
Mercedes-Benz C280 1999
  • Front Left
  • 2.8L V6 2799CC
  • Cutting and Welding Required During Installation
Mercedes-Benz C280 2000
  • Front Left
  • 2.8L V6 2799CC
  • Cutting and Welding Required During Installation
Mercedes-Benz CL500 1998
  • Rear Left
  • Rear Right
  • 5L V8 4973CC
  • Cutting and Welding Required During Installation
Mercedes-Benz CL500 1999
  • Rear Left
  • Rear Right
  • 5L V8 4973CC
  • Cutting and Welding Required During Installation
Mercedes-Benz CL500 2000
  • Rear Left
  • 5L V8 4973CC
  • Cutting and Welding Required During Installation
Mercedes-Benz CL500 2001
  • Rear Left
  • 5L V8 4973CC
  • Cutting and Welding Required During Installation
Mercedes-Benz CL500 2002
  • Rear Left
  • 5L V8 4973CC
  • Cutting and Welding Required During Installation
Mercedes-Benz CL500 2003
  • Rear
  • 5L V8 4973CC
  • Cutting and Welding Required During Installation
Mercedes-Benz CL500 2004
  • Rear
  • 5L V8 4973CC
  • Cutting and Welding Required During Installation
Mercedes-Benz CL500 2005
  • Rear
  • 5L V8 4973CC
  • Cutting and Welding Required During Installation
Mercedes-Benz CL500 2006
  • Rear
  • 5L V8 4966CC
  • Cutting and Welding Required During Installation
Mercedes-Benz CLK320 2003
  • Front Right
  • Front Left
  • Rear Left
  • Rear Right
  • 3.2L V6 3199CC
  • Cutting and Welding Required During Installation
Mercedes-Benz E320 1998
  • Left
  • Right
  • Base
  • 3.2L V6 3199CC
  • Cutting and Welding Required During Installation
Mercedes-Benz E320 1999
  • Right
  • Left
  • Base
  • 3.2L V6 3199CC
  • Cutting and Welding Required During Installation
Mercedes-Benz E320 2000
  • Right
  • Left
  • Base
  • 3.2L V6 3199CC
  • Cutting and Welding Required During Installation
Mercedes-Benz E320 2001
  • Right
  • Left
  • Base
  • 3.2L V6 3199CC
  • Cutting and Welding Required During Installation
Mercedes-Benz E320 2002
  • Right
  • Left
  • Base
  • 3.2L V6 3199CC
  • Cutting and Welding Required During Installation
Mercedes-Benz E420 1997
  • Right
  • Left
  • 4.2L V8 4196CC
  • Cutting and Welding Required During Installation
Mercedes-Benz ML55 AMG 2000
  • Right
  • Left
  • 5.5L V8
  • Cutting and Welding Required During Installation
Mercedes-Benz ML55 AMG 2001
  • Right
  • Left
  • 5.5L V8
  • Cutting and Welding Required During Installation
Mercedes-Benz ML55 AMG 2002
  • Right
  • Left
  • 5.5L V8
  • Cutting and Welding Required During Installation
Mercedes-Benz ML55 AMG 2003
  • Right
  • Left
  • 5.5L V8
  • Cutting and Welding Required During Installation
Mercedes-Benz S420 1996
  • Rear Left
  • Rear Right
  • 4.2L V8 4196CC
  • Cutting and Welding Required During Installation
Mercedes-Benz S420 1997
  • Rear Left
  • Rear Right
  • 4.2L V8 4196CC
  • Cutting and Welding Required During Installation
Mercedes-Benz S420 1998
  • Rear Right
  • Rear Left
  • 4.2L V8 4196CC
  • Cutting and Welding Required During Installation
Mercedes-Benz S420 1999
  • Rear Right
  • Rear Left
  • 4.2L V8 4196CC
  • Cutting and Welding Required During Installation
Mercedes-Benz S430 2004
  • Rear
  • 4.3L V8 4266CC
  • Cutting and Welding Required During Installation
Mercedes-Benz S430 2005
  • Rear
  • 4.3L V8 4266CC
  • Cutting and Welding Required During Installation
Mercedes-Benz S430 2006
  • Rear
  • 4.3L V8 4266CC
  • Cutting and Welding Required During Installation
Mercedes-Benz S500 1996
  • Rear Right
  • Rear Left
  • 5L V8 4973CC
  • Cutting and Welding Required During Installation
Mercedes-Benz S500 1997
  • Rear Left
  • Rear Right
  • 5L V8 4973CC
  • Cutting and Welding Required During Installation
Mercedes-Benz S500 1998
  • Rear Left
  • Rear Right
  • 5L V8 4973CC
  • Cutting and Welding Required During Installation
Mercedes-Benz S500 1999
  • Rear Left
  • Rear Right
  • 5L V8 4973CC
  • Cutting and Welding Required During Installation
Mercedes-Benz S500 2000
  • Rear
  • 5L V8 4966CC
  • Cutting and Welding Required During Installation
Mercedes-Benz S500 2001
  • Rear
  • 5L V8 4966CC
  • Cutting and Welding Required During Installation
Mercedes-Benz S500 2002
  • Rear
  • 5L V8 4966CC
  • Cutting and Welding Required During Installation
Mercedes-Benz S500 2003
  • Rear
  • 5L V8 4966CC
  • Cutting and Welding Required During Installation
Mercedes-Benz S500 2004
  • Rear
  • 5L V8 4966CC
  • Cutting and Welding Required During Installation
Mercedes-Benz S500 2005
  • Rear
  • 5L V8 4966CC
  • Cutting and Welding Required During Installation
Mercedes-Benz S500 2006
  • Rear
  • 5L V8 4966CC
  • Cutting and Welding Required During Installation
Mercedes-Benz S600 1996
  • Right
  • Left
  • 6L V12 5987CC
  • Cutting and Welding Required During Installation
Mercedes-Benz S600 1997
  • Right
  • Left
  • 6L V12 5987CC
  • Cutting and Welding Required During Installation
Mercedes-Benz S600 1998
  • Right
  • Left
  • 6L V12 5987CC
  • Cutting and Welding Required During Installation
Mercedes-Benz S600 1999
  • Right
  • Left
  • 6L V12 5987CC
  • Cutting and Welding Required During Installation
Mercedes-Benz SL500 1996
  • Front Left
  • Front Right
  • Rear Right
  • Rear Left
  • 5L V8 4973CC
  • Cutting and Welding Required During Installation
Mercedes-Benz SL500 1997
  • Front Right
  • Front Left
  • Rear Left
  • Rear Right
  • 5L V8 4973CC
  • Cutting and Welding Required During Installation
Mercedes-Benz SL500 1998
  • Front Left
  • Front Right
  • Rear Left
  • Rear Right
  • 5L V8 4973CC
  • Cutting and Welding Required During Installation
Mercedes-Benz SL500 1999
  • Front Left
  • Rear Left
  • 5L V8 4973CC
  • Cutting and Welding Required During Installation
Mercedes-Benz SL500 2000
  • Front Left
  • Rear Left
  • 5L V8 4973CC
  • Cutting and Welding Required During Installation
Mercedes-Benz SL500 2001
  • Front Left
  • Rear Left
  • 5L V8 4973CC
  • Cutting and Welding Required During Installation
Mercedes-Benz SL500 2002
  • Front Left
  • Rear Left
  • 5L V8 4973CC
  • Cutting and Welding Required During Installation
Mercury Cougar 1996
  • Front Left
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Mercury Cougar 1997
  • Front Left
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Mercury Villager 1996
  • Front
  • 3L V6 182CID
  • Cutting and Welding Required During Installation
Mercury Villager 1997
  • Front
  • 3L V6 182CID
  • Cutting and Welding Required During Installation
Mercury Villager 1998
  • Front
  • 3L V6 182CID
  • Cutting and Welding Required During Installation
Mercury Villager 1999
  • Front
  • 3.3L V6 3275CC
  • Cutting and Welding Required During Installation
Mercury Villager 2000
  • Front
  • 3.3L V6 3275CC
  • Cutting and Welding Required During Installation
Mercury Villager 2001
  • Front
  • 3.3L V6 3275CC
  • Cutting and Welding Required During Installation
Mercury Villager 2002
  • Front
  • 3.3L V6 3275CC
  • Cutting and Welding Required During Installation
Mini Cooper 2002
  • 1.6L L4 1600CC
  • Cutting and Welding Required During Installation
Mini Cooper 2003
  • 1.6L L4 1600CC
  • Cutting and Welding Required During Installation
Mini Cooper 2004
  • 1.6L L4 1600CC
  • Cutting and Welding Required During Installation
Mini Cooper 2005
  • 1.6L L4 1600CC
  • Cutting and Welding Required During Installation
Mini Cooper 2006
  • 1.6L L4 1600CC
  • Cutting and Welding Required During Installation
Mini Cooper 2007
  • 1.6L L4 1600CC
  • Cutting and Welding Required During Installation
Mini Cooper 2008
  • 1.6L L4 1600CC
  • Cutting and Welding Required During Installation
Mitsubishi Eclipse 1995
  • 2L L4 1996CC/122CID
  • Cutting and Welding Required During Installation
Mitsubishi Eclipse 1996
  • 2.4L L4 2351CC
  • 2L L4 1996CC/122CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Mitsubishi Eclipse 1997
  • 2.4L L4 2351CC
  • 2L L4 1997CC/122CID
  • 2L L4 1996CC/122CID
  • Turbocharged
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Mitsubishi Eclipse 1998
  • 2.4L L4 2351CC
  • 2L L4 1997CC/122CID
  • 2L L4 1996CC/122CID
  • Turbocharged
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Mitsubishi Eclipse 1999
  • 2.4L L4 2351CC
  • 2L L4 1997CC/122CID
  • 2L L4 1996CC/122CID
  • Turbocharged
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Mitsubishi Eclipse 2008
  • Rear
  • 2.4L L4 2378CC
  • Cutting and Welding Required During Installation
Mitsubishi Expo 1995
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Mitsubishi Galant 1995
  • Rear
  • 2.4L L4 2351CC
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
  • California Emissions Equipped Vehicles Registered Outside Of California
Mitsubishi Galant 1996
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Mitsubishi Galant 1997
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Mitsubishi Galant 1998
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Mitsubishi Galant 2004
  • Rear
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Mitsubishi Galant 2005
  • Rear
  • 2.4L L4 2378CC
  • Cutting and Welding Required During Installation
Mitsubishi Galant 2006
  • Rear
  • 2.4L L4 2378CC
  • Cutting and Welding Required During Installation
Mitsubishi Galant 2007
  • Rear
  • 2.4L L4 2378CC
  • Cutting and Welding Required During Installation
Mitsubishi Galant 2008
  • Rear
  • 2.4L L4 2378CC
  • Cutting and Welding Required During Installation
Mitsubishi Galant 2009
  • Rear
  • 2.4L L4 2378CC
  • Cutting and Welding Required During Installation
Mitsubishi Galant 2010
  • Rear
  • 2.4L L4 2378CC
  • Cutting and Welding Required During Installation
Mitsubishi Lancer 2004
  • 2.4L L4 2400CC
  • Cutting and Welding Required During Installation
Mitsubishi Lancer 2009
  • 2.4L L4 2360CC/144CID
  • Cutting and Welding Required During Installation
Mitsubishi Lancer 2010
  • 2L L4 1998CC/122CID
  • 2.4L L4 2360CC/144CID
  • Cutting and Welding Required During Installation
Mitsubishi Lancer 2011
  • 2L L4 1998CC/122CID
  • 2.4L L4 2360CC/144CID
  • Cutting and Welding Required During Installation
Mitsubishi Lancer 2012
  • 2L L4 1998CC/122CID
  • 2.4L L4 2360CC/144CID
  • Cutting and Welding Required During Installation
Mitsubishi Lancer 2013
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Mitsubishi Lancer 2014
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Mitsubishi Mirage 1995
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
Mitsubishi Mirage 1996
  • 1.8L L4 1834CC/112CID
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
Mitsubishi Mirage 1997
  • 1.8L L4 1834CC/112CID
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
Mitsubishi Mirage 1998
  • 1.8L L4 1834CC/112CID
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
Mitsubishi Mirage 1999
  • 1.8L L4 1834CC/112CID
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
Mitsubishi Mirage 2000
  • 1.8L L4 1834CC/112CID
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
Mitsubishi Mirage 2001
  • Rear
  • 1.8L L4 1834CC/112CID
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
Mitsubishi Mirage 2002
  • Rear
  • 1.8L L4 1834CC/112CID
  • 1.5L L4 1468CC/90cCID
  • Cutting and Welding Required During Installation
Mitsubishi Montero 2001
  • Front Right
  • 3.5L V6 3497CC/215CID
  • Cutting and Welding Required During Installation
Mitsubishi Montero 2002
  • Front Right
  • 3.5L V6 3497CC/215CID
  • Cutting and Welding Required During Installation
Nissan 240SX 1996
  • Rear
  • 2.4L L4 2389CC
  • Cutting and Welding Required During Installation
Nissan 240SX 1997
  • Rear
  • 2.4L L4 2389CC
  • Cutting and Welding Required During Installation
Nissan 240SX 1998
  • Rear
  • 2.4L L4 2389CC
  • Cutting and Welding Required During Installation
Nissan 300ZX 1996
  • Left
  • Right
  • 2+2
  • Base
  • 3L V6 2960CC/181CID
  • Cutting and Welding Required During Installation
Nissan 350Z 2003
  • Rear Right
  • Rear Left
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Nissan 350Z 2004
  • Rear Right
  • Rear Left
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Nissan 350Z 2005
  • Rear Right
  • Rear Left
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Nissan 350Z 2006
  • Rear Right
  • Rear Left
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Nissan Altima 2002
  • 2.5L L4 2488CC/152CID
  • Cutting and Welding Required During Installation
Nissan Altima 2003
  • 2.5L L4 2488CC/152CID
  • Cutting and Welding Required During Installation
Nissan Altima 2004
  • 2.5L L4 2488CC/152CID
  • Cutting and Welding Required During Installation
Nissan Altima 2005
  • 2.5L L4 2488CC/152CID
  • Cutting and Welding Required During Installation
Nissan Altima 2006
  • 2.5L L4 2488CC/152CID
  • Cutting and Welding Required During Installation
Nissan Frontier 2005
  • Rear Right
  • Rear Left
  • 4L V6 3954CC
  • Cutting and Welding Required During Installation
Nissan Frontier 2006
  • Rear Right
  • Rear Left
  • 4L V6 3954CC
  • Cutting and Welding Required During Installation
Nissan Frontier 2007
  • Rear Right
  • Rear Left
  • 4L V6 3954CC
  • Cutting and Welding Required During Installation
Nissan Frontier 2008
  • Rear Right
  • Rear Left
  • 4L V6 3954CC
  • Cutting and Welding Required During Installation
Nissan Frontier 2009
  • Rear Right
  • Rear Left
  • 4L V6 3954CC
  • Cutting and Welding Required During Installation
Nissan Frontier 2010
  • Rear Left
  • Rear Right
  • 4L V6 3954CC
  • Cutting and Welding Required During Installation
Nissan Maxima 1995
  • Rear
  • 3L V6 2988CC/182CID
  • Cutting and Welding Required During Installation
Nissan Maxima 1996
  • Rear
  • 3L V6 2988CC/182CID
  • Cutting and Welding Required During Installation
Nissan Maxima 1997
  • Rear
  • 3L V6 2988CC/182CID
  • Cutting and Welding Required During Installation
Nissan Maxima 1998
  • Rear
  • 3L V6 2988CC/182CID
  • Cutting and Welding Required During Installation
Nissan Maxima 1999
  • Rear
  • 3L V6 2988CC/182CID
  • Cutting and Welding Required During Installation
Nissan Pathfinder 2005
  • Rear Left
  • Rear Right
  • 4L V6 3954CC
  • Cutting and Welding Required During Installation
Nissan Pathfinder 2006
  • Rear Left
  • Rear Right
  • 4L V6 3954CC
  • Cutting and Welding Required During Installation
Nissan Pathfinder 2007
  • Rear Left
  • Rear Right
  • 4L V6 3954CC
  • Cutting and Welding Required During Installation
Nissan Pathfinder 2008
  • Rear Left
  • Rear Right
  • 4L V6 3954CC
  • Cutting and Welding Required During Installation
Nissan Pathfinder 2009
  • Rear Left
  • Rear Right
  • 4L V6 3954CC
  • Cutting and Welding Required During Installation
Nissan Pathfinder 2010
  • Rear Right
  • Rear Left
  • 4L V6 3954CC
  • Cutting and Welding Required During Installation
Nissan Quest 1996
  • Front
  • 3L V6 2960CC/181CID
  • Cutting and Welding Required During Installation
Nissan Quest 1997
  • Front
  • 3L V6 2960CC/181CID
  • Cutting and Welding Required During Installation
Nissan Quest 1998
  • Front
  • 3L V6 2960CC/181CID
  • Cutting and Welding Required During Installation
Nissan Quest 1999
  • Front
  • 3.3L V6 3275CC
  • Cutting and Welding Required During Installation
Nissan Quest 2000
  • Front
  • 3.3L V6 3275CC
  • Cutting and Welding Required During Installation
Nissan Quest 2001
  • Front
  • 3.3L V6 3275CC
  • Cutting and Welding Required During Installation
Nissan Quest 2002
  • Front
  • 3.3L V6 3275CC
  • Cutting and Welding Required During Installation
Nissan Sentra 2009
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
Nissan Sentra 2010
  • 2L L4 1997CC/122CID
  • Cutting and Welding Required During Installation
Nissan Xterra 2005
  • Rear Right
  • Rear Left
  • 4L V6 3954CC
  • Cutting and Welding Required During Installation
Nissan Xterra 2006
  • Rear Right
  • Rear Left
  • 4L V6 3954CC
  • Cutting and Welding Required During Installation
Nissan Xterra 2007
  • Rear Right
  • Rear Left
  • 4L V6 3954CC
  • Cutting and Welding Required During Installation
Nissan Xterra 2008
  • Rear Right
  • Rear Left
  • 4L V6 3954CC
  • Cutting and Welding Required During Installation
Nissan Xterra 2009
  • Rear Right
  • Rear Left
  • 4L V6 3954CC
  • Cutting and Welding Required During Installation
Nissan Xterra 2010
  • Rear Left
  • Rear Right
  • 4L V6 3954CC
  • Cutting and Welding Required During Installation
Oldsmobile Achieva 1996
  • Automatic
  • 2.4L L4 2392CC/146CID
  • Cutting and Welding Required During Installation
Oldsmobile Achieva 1997
  • Automatic
  • 2.4L L4 2392CC/146CID
  • Cutting and Welding Required During Installation
Oldsmobile Achieva 1998
  • Automatic
  • 2.4L L4 2392CC/146CID
  • Cutting and Welding Required During Installation
Plymouth Breeze 1998
  • 2.4L L4 2429CC/148CID
  • 2L L4 1996CC/122CID
  • Cutting and Welding Required During Installation
Plymouth Breeze 1999
  • 2.4L L4 2429CC/148CID
  • 2L L4 1996CC/122CID
  • Cutting and Welding Required During Installation
Plymouth Breeze 2000
  • 2.4L L4 2429CC/148CID
  • 2L L4 1996CC/122CID
  • Cutting and Welding Required During Installation
Pontiac Aztek 2004
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Pontiac Aztek 2005
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Pontiac G6 2005
  • Rear
  • 3.5L V6 213CID
  • Cutting and Welding Required During Installation
Pontiac G6 2006
  • Rear
  • 3.5L V6 213CID
  • Cutting and Welding Required During Installation
Pontiac G6 2007
  • Front
  • 3.5L V6 3490CC/213CID
  • Cutting and Welding Required During Installation
Pontiac G6 2008
  • Front Forward
  • 3.5L V6 3490CC/213CID
  • Cutting and Welding Required During Installation
Pontiac G6 2009
  • Front Forward
  • 3.5L V6 3490CC/213CID
  • Cutting and Welding Required During Installation
Pontiac Grand Am 1996
  • GT
  • SE
  • Automatic
  • 2.4L L4 2392CC/146CID
  • Cutting and Welding Required During Installation
Pontiac Grand Am 1997
  • GT
  • SE
  • Automatic
  • 2.4L L4 2392CC/146CID
  • Cutting and Welding Required During Installation
Pontiac Grand Am 1998
  • GT
  • SE
  • Automatic
  • 2.4L L4 2392CC/146CID
  • Cutting and Welding Required During Installation
Pontiac GTO 2004
  • Left
  • Right
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Pontiac Vibe 2003
  • FWD
  • 1.8L L4 1794CC
  • Cutting and Welding Required During Installation
Pontiac Vibe 2004
  • FWD
  • 1.8L L4 1794CC
  • Cutting and Welding Required During Installation
Pontiac Vibe 2005
  • FWD
  • 1.8L L4 1794CC
  • Cutting and Welding Required During Installation
Pontiac Vibe 2006
  • 1.8L L4 1794CC
  • 1.8L L4 1795CC
  • Cutting and Welding Required During Installation
Pontiac Vibe 2007
  • 1.8L L4 1794CC
  • Cutting and Welding Required During Installation
Pontiac Vibe 2008
  • 1.8L L4 1794CC
  • Cutting and Welding Required During Installation
Pontiac Vibe 2010
  • Front
  • 1.8L L4 1798CC/110CID
  • Cutting and Welding Required During Installation
Saab 9-3 1999
  • 2L L4 1985CC
  • 2.3L L4 2290CC/140CID
  • Cutting and Welding Required During Installation
Saab 9-3 2000
  • 2L L4 1985CC
  • 2.3L L4 2290CC/140CID
  • Cutting and Welding Required During Installation
Saab 9-3 2001
  • Rear
  • 2L L4 1985CC
  • Cutting and Welding Required During Installation
Saab 9-3 2002
  • Rear
  • 2L L4 1985CC
  • Cutting and Welding Required During Installation
Saab 9-5 1999
  • 3L V6 2961CC/181CID
  • 2.3L L4 2290CC/140CID
  • Cutting and Welding Required During Installation
Saab 9-5 2000
  • 3L V6 2961CC/181CID
  • 2.3L L4 2290CC/140CID
  • Cutting and Welding Required During Installation
Saab 9-5 2001
  • 2.3L L4 2290CC/140CID
  • 3L V6 2961CC/181CID
  • Cutting and Welding Required During Installation
Saab 9-5 2002
  • 2.3L L4 2290CC/140CID
  • 3L V6 2961CC/181CID
  • Cutting and Welding Required During Installation
Saab 9-5 2003
  • 2.3L L4 2290CC/140CID
  • 3L V6 2961CC/181CID
  • Cutting and Welding Required During Installation
Saturn Aura 2007
  • Front
  • 3.5L V6 3490CC/213CID
  • Cutting and Welding Required During Installation
Saturn Aura 2008
  • Front
  • 3.5L V6 3490CC/213CID
  • Cutting and Welding Required During Installation
Saturn L300 2001
  • Rear
  • 3L V6 3000CC/181CID
  • Cutting and Welding Required During Installation
Saturn L300 2002
  • Rear
  • 3L V6 3000CC/181CID
  • Cutting and Welding Required During Installation
Saturn L300 2003
  • Rear
  • 3L V6 3000CC/181CID
  • Cutting and Welding Required During Installation
Saturn L300 2004
  • Rear
  • 3L V6 3000CC/181CID
  • Cutting and Welding Required During Installation
Saturn L300 2005
  • Rear
  • 3L V6 3000CC/181CID
  • Cutting and Welding Required During Installation
Saturn LS2 2000
  • Rear
  • 3L V6 3000CC/181CID
  • Cutting and Welding Required During Installation
Saturn LW2 2000
  • Rear
  • 3L V6 3000CC/181CID
  • Cutting and Welding Required During Installation
Saturn LW300 2001
  • Rear
  • 3L V6 3000CC/181CID
  • Cutting and Welding Required During Installation
Saturn LW300 2002
  • Rear
  • 3L V6 3000CC/181CID
  • Cutting and Welding Required During Installation
Saturn LW300 2003
  • Rear
  • 3L V6 3000CC/181CID
  • Cutting and Welding Required During Installation
Suzuki Equator 2009
  • Rear
  • 2.5L L4 2488CC/152CID
  • Cutting and Welding Required During Installation
Suzuki Equator 2010
  • Rear
  • 2.5L L4 2488CC/152CID
  • Cutting and Welding Required During Installation
Suzuki Equator 2011
  • Rear
  • 2.5L L4 2488CC/152CID
  • Cutting and Welding Required During Installation
Suzuki Equator 2012
  • Rear
  • 2.5L L4 2488CC/152CID
  • Cutting and Welding Required During Installation
Suzuki Forenza 2004
  • Rear
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Suzuki Forenza 2005
  • Rear
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Suzuki Reno 2005
  • Rear
  • 2L L4 1998CC
  • Cutting and Welding Required During Installation
Toyota 4Runner 1996
  • 2.7L L4 2694CC
  • Cutting and Welding Required During Installation
Toyota 4Runner 1997
  • 2.7L L4 2694CC
  • Cutting and Welding Required During Installation
Toyota 4Runner 1998
  • 2.7L L4 2694CC
  • Cutting and Welding Required During Installation
Toyota 4Runner 1999
  • 2.7L L4 2694CC
  • Cutting and Welding Required During Installation
Toyota 4Runner 2000
  • 2.7L L4 2694CC
  • Cutting and Welding Required During Installation
Toyota 4Runner 2005
  • Left
  • Right
  • 4.7L V8 4663CC/285CID
  • 4L V6 3956CC/241CID
  • Cutting and Welding Required During Installation
Toyota 4Runner 2006
  • Left
  • Right
  • 4.7L V8 4663CC/285CID
  • 4L V6 3956CC/241CID
  • Cutting and Welding Required During Installation
Toyota 4Runner 2007
  • Left
  • Right
  • 4.7L V8 4663CC/285CID
  • 4L V6 3956CC/241CID
  • Cutting and Welding Required During Installation
Toyota 4Runner 2008
  • Left
  • Right
  • 4.7L V8 4663CC/285CID
  • 4L V6 3956CC/241CID
  • Cutting and Welding Required During Installation
Toyota 4Runner 2009
  • Left
  • Right
  • 4.7L V8 4663CC/285CID
  • 4L V6 3956CC/241CID
  • Cutting and Welding Required During Installation
Toyota 4Runner 2010
  • Right
  • Left
  • 4L V6 3956CC/241CID
  • Cutting and Welding Required During Installation
Toyota 4Runner 2011
  • Right
  • Left
  • 4L V6 3956CC/241CID
  • Cutting and Welding Required During Installation
Toyota 4Runner 2012
  • Right
  • Left
  • 4L V6 3956CC/241CID
  • Cutting and Welding Required During Installation
Toyota 4Runner 2013
  • Right
  • Left
  • 4L V6 3956CC/241CID
  • Cutting and Welding Required During Installation
Toyota 4Runner 2014
  • Right
  • Left
  • 4L V6 3956CC/241CID
  • Cutting and Welding Required During Installation
Toyota Avalon 2006
  • Rear
  • 3.5L V6 3456CC
  • Cutting and Welding Required During Installation
Toyota Avalon 2007
  • Rear
  • 3.5L V6 3456CC
  • Cutting and Welding Required During Installation
Toyota Avalon 2008
  • Rear
  • 3.5L V6 3456CC
  • Cutting and Welding Required During Installation
Toyota Avalon 2009
  • Rear
  • 3.5L V6 3456CC
  • Cutting and Welding Required During Installation
Toyota Avalon 2013
  • Rear
  • 3.5L V6 3456CC
  • Cutting and Welding Required During Installation
Toyota Avalon 2014
  • Rear
  • 3.5L V6 3456CC
  • Cutting and Welding Required During Installation
Toyota Avalon 2015
  • Rear
  • 3.5L V6 3456CC
  • Cutting and Welding Required During Installation
Toyota Avalon 2016
  • Rear
  • 3.5L V6 3456CC
  • Cutting and Welding Required During Installation
Toyota Avalon 2017
  • Rear
  • 3.5L V6 3456CC
  • Cutting and Welding Required During Installation
Toyota Camry 1997
  • 3L V6 2995CC
  • Cutting and Welding Required During Installation
Toyota Camry 1998
  • 3L V6 2995CC
  • Cutting and Welding Required During Installation
Toyota Camry 1999
  • 3L V6 2995CC
  • Cutting and Welding Required During Installation
Toyota Camry 2000
  • 3L V6 2995CC
  • Cutting and Welding Required During Installation
Toyota Camry 2001
  • Standard
  • 3L V6 2995CC
  • Cutting and Welding Required During Installation
Toyota Camry 2004
  • Rear
  • 3.3L V6 3300CC
  • 2.4L L4 2362CC/-CID
  • Cutting and Welding Required During Installation
  • Split Date From: 09/2003
Toyota Camry 2005
  • Rear
  • 3.3L V6 3300CC/202CID
  • 2.4L L4 2362CC/-CID
  • Cutting and Welding Required During Installation
Toyota Camry 2006
  • Rear
  • 3.3L V6 3300CC/202CID
  • 2.4L L4 2362CC/-CID
  • Cutting and Welding Required During Installation
Toyota Camry 2012
  • Rear
  • 2.5L L4 2494CC/152CID
  • Cutting and Welding Required During Installation
Toyota Camry 2013
  • Rear
  • 2.5L L4 2494CC/152CID
  • Cutting and Welding Required During Installation
Toyota Camry 2014
  • Rear
  • 2.5L L4 2494CC/152CID
  • Cutting and Welding Required During Installation
Toyota Camry 2015
  • Rear
  • 2.5L L4 2494CC/152CID
  • Cutting and Welding Required During Installation
Toyota Camry 2016
  • Rear
  • 2.5L L4 2494CC/152CID
  • Cutting and Welding Required During Installation
Toyota Camry 2017
  • Rear
  • 2.5L L4 2494CC/152CID
  • Cutting and Welding Required During Installation
Toyota Celica 2000
  • GTS
  • 1.8L L4 1795CC
  • Cutting and Welding Required During Installation
Toyota Celica 2001
  • GT
  • GTS
  • 1.8L L4 1794CC
  • 1.8L L4 1795CC
  • Cutting and Welding Required During Installation
Toyota Celica 2002
  • GTS
  • GT
  • 1.8L L4 1795CC
  • 1.8L L4 1794CC
  • Cutting and Welding Required During Installation
Toyota Celica 2003
  • GTS
  • GT
  • 1.8L L4 1795CC
  • 1.8L L4 1794CC
  • Cutting and Welding Required During Installation
Toyota Celica 2004
  • GT
  • GTS
  • 1.8L L4 1794CC
  • 1.8L L4 1795CC
  • Cutting and Welding Required During Installation
Toyota Celica 2005
  • GTS
  • GT
  • 1.8L L4 1795CC
  • 1.8L L4 1794CC
  • Cutting and Welding Required During Installation
Toyota Corolla 2003
  • 1.8L L4 1794CC
  • Cutting and Welding Required During Installation
Toyota Corolla 2004
  • 1.8L L4 1794CC
  • Cutting and Welding Required During Installation
Toyota Corolla 2005
  • 1.8L L4 1794CC
  • 1.8L L4 1795CC
  • 1ZZFE
  • Cutting and Welding Required During Installation
  • 2ZZGE
Toyota Corolla 2006
  • 1.8L L4 1795CC
  • 1.8L L4 1794CC
  • Cutting and Welding Required During Installation
Toyota Corolla 2007
  • 1.8L L4 1794CC
  • Cutting and Welding Required During Installation
Toyota Corolla 2008
  • 1.8L L4 1794CC
  • Cutting and Welding Required During Installation
Toyota Corolla 2009
  • Front
  • 1.8L L4 1798CC/110CID
  • Cutting and Welding Required During Installation
Toyota Corolla 2010
  • Front
  • 1.8L L4 1798CC/110CID
  • Cutting and Welding Required During Installation
Toyota Corolla 2014
  • Rear
  • 1.8L L4 1798CC/110CID
  • Cutting and Welding Required During Installation
Toyota FJ Cruiser 2007
  • Right
  • Left
  • 4L V6 3956CC/241CID
  • Cutting and Welding Required During Installation
Toyota FJ Cruiser 2008
  • Left
  • Right
  • 4L V6 3956CC/241CID
  • Cutting and Welding Required During Installation
Toyota FJ Cruiser 2009
  • Left
  • Right
  • 4L V6 3956CC/241CID
  • Cutting and Welding Required During Installation
Toyota FJ Cruiser 2010
  • Left
  • Right
  • 4L V6 3956CC/241CID
  • Cutting and Welding Required During Installation
Toyota FJ Cruiser 2011
  • Left
  • Right
  • 4L V6 3956CC/241CID
  • Cutting and Welding Required During Installation
Toyota FJ Cruiser 2012
  • Left
  • Right
  • 4L V6 3956CC/241CID
  • Cutting and Welding Required During Installation
Toyota FJ Cruiser 2013
  • Left
  • Right
  • 4L V6 3956CC/241CID
  • Cutting and Welding Required During Installation
Toyota FJ Cruiser 2014
  • Left
  • Right
  • 4L V6 3956CC/241CID
  • Cutting and Welding Required During Installation
Toyota Highlander 2004
  • Rear
  • 2.4L L4 2362CC/-CID
  • 3.3L V6 3300CC
  • Cutting and Welding Required During Installation
Toyota Highlander 2005
  • Rear
  • 3.3L V6 3300CC/202CID
  • 2.4L L4 2362CC/-CID
  • Cutting and Welding Required During Installation
Toyota Highlander 2006
  • Rear
  • 3.3L V6 3300CC/202CID
  • 2.4L L4 2362CC/-CID
  • Cutting and Welding Required During Installation
Toyota Land Cruiser 1998
  • Right
  • Left
  • 4.7L V8 4663CC/285CID
  • Cutting and Welding Required During Installation
Toyota Land Cruiser 1999
  • Right
  • Left
  • 4.7L V8 4663CC/285CID
  • Cutting and Welding Required During Installation
Toyota Land Cruiser 2000
  • Right
  • Left
  • 4.7L V8 4663CC/285CID
  • Cutting and Welding Required During Installation
Toyota Land Cruiser 2001
  • Right
  • Left
  • 4.7L V8 4663CC/285CID
  • Cutting and Welding Required During Installation
Toyota Land Cruiser 2002
  • Right
  • Left
  • 4.7L V8 4663CC/285CID
  • Cutting and Welding Required During Installation
Toyota Land Cruiser 2003
  • Left
  • Right
  • 4.7L V8 4663CC/285CID
  • Cutting and Welding Required During Installation
Toyota Land Cruiser 2004
  • Left
  • Right
  • 4.7L V8 4663CC/285CID
  • Cutting and Welding Required During Installation
Toyota Prius 2001
  • Front
  • 1.5L L4 1497CC
  • Cutting and Welding Required During Installation
Toyota Prius 2002
  • Front
  • 1.5L L4 1497CC
  • Cutting and Welding Required During Installation
Toyota Prius 2003
  • Front
  • 1.5L L4 1497CC
  • Cutting and Welding Required During Installation
Toyota Prius 2004
  • Front
  • 1.5L L4 1497CC
  • Cutting and Welding Required During Installation
Toyota Prius 2005
  • Front
  • 1.5L L4 1497CC
  • Cutting and Welding Required During Installation
Toyota Prius 2006
  • Front
  • 1.5L L4 1497CC
  • Cutting and Welding Required During Installation
Toyota Prius 2007
  • Front
  • 1.5L L4 1497CC
  • Cutting and Welding Required During Installation
Toyota Prius 2008
  • Front
  • 1.5L L4 1497CC
  • Cutting and Welding Required During Installation
Toyota Prius 2009
  • Front
  • 1.5L L4 1497CC
  • Cutting and Welding Required During Installation
Toyota RAV4 2004
  • Rear
  • 2.4L L4 2362CC/-CID
  • Cutting and Welding Required During Installation
Toyota RAV4 2005
  • Rear
  • 2.4L L4 2362CC/-CID
  • Cutting and Welding Required During Installation
Toyota RAV4 2006
  • Rear
  • 2.4L L4 2362CC/-CID
  • Cutting and Welding Required During Installation
Toyota RAV4 2007
  • Rear
  • 2.4L L4 2362CC/-CID
  • Cutting and Welding Required During Installation
Toyota RAV4 2008
  • Rear
  • 2.4L L4 2362CC/-CID
  • Cutting and Welding Required During Installation
Toyota Solara 1999
  • Standard
  • 3L V6 2995CC
  • 2.2L L4 2164CC
  • Cutting and Welding Required During Installation
  • California Emissions Equipped Vehicles Registered Outside Of California
Toyota Solara 2000
  • Standard
  • 3L V6 2995CC
  • Cutting and Welding Required During Installation
  • California Emissions Equipped Vehicles Registered Outside Of California
Toyota Solara 2001
  • Standard
  • 3L V6 2995CC
  • Cutting and Welding Required During Installation
Toyota Solara 2002
  • Rear
  • Standard
  • 3L V6 2995CC
  • Cutting and Welding Required During Installation
Toyota Solara 2004
  • Rear
  • 3.3L V6 3300CC
  • 2.4L L4 2362CC/-CID
  • Cutting and Welding Required During Installation
Toyota Solara 2005
  • Rear
  • 3.3L V6 3300CC/202CID
  • 2.4L L4 2362CC/-CID
  • Cutting and Welding Required During Installation
Toyota Solara 2006
  • Rear
  • 3.3L V6 3300CC/202CID
  • 2.4L L4 2362CC/-CID
  • Cutting and Welding Required During Installation
  • Split Date From: 05/2006
Toyota Solara 2007
  • Rear
  • 3.3L V6 3300CC/202CID
  • 2.4L L4 2362CC/-CID
  • Cutting and Welding Required During Installation
Toyota Solara 2008
  • Rear
  • 3.3L V6 3300CC/202CID
  • 2.4L L4 2362CC/-CID
  • Cutting and Welding Required During Installation
Toyota Supra 1996
  • Front
  • 3L L6 2997CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Toyota Supra 1997
  • Front
  • 3L L6 2997CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Toyota Supra 1998
  • Front
  • 3L L6 2997CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Toyota Tacoma 1996
  • Rear
  • 4WD
  • 3.4L V6 3378CC
  • Cutting and Welding Required During Installation
Toyota Tacoma 1997
  • Rear
  • 4WD
  • 3.4L V6 3378CC
  • Cutting and Welding Required During Installation
Toyota Tacoma 1998
  • Rear
  • 4WD
  • 3.4L V6 3378CC
  • Cutting and Welding Required During Installation
Toyota Tacoma 1999
  • Rear
  • Front
  • RWD
  • 4WD
  • 3.4L V6 3378CC
  • 2.4L L4 2438CC
  • Cutting and Welding Required During Installation
  • California Emissions Equipped Vehicles Registered Outside Of California
Toyota Tacoma 2000
  • Rear
  • Front
  • RWD
  • 4WD
  • 3.4L V6 3378CC
  • 2.4L L4 2438CC
  • Cutting and Welding Required During Installation
  • California Emissions Equipped Vehicles Registered Outside Of California
Toyota Tacoma 2005
  • Left
  • Right
  • 4L V6 3956CC/241CID
  • Cutting and Welding Required During Installation
Toyota Tacoma 2006
  • Left
  • Right
  • 4L V6 3956CC/241CID
  • Cutting and Welding Required During Installation
Toyota Tacoma 2007
  • Left
  • Right
  • 4L V6 3956CC/241CID
  • Cutting and Welding Required During Installation
Toyota Tacoma 2008
  • Left
  • Right
  • 4L V6 3956CC/241CID
  • Cutting and Welding Required During Installation
Toyota Tacoma 2009
  • Left
  • Right
  • 4L V6 3956CC/241CID
  • Cutting and Welding Required During Installation
Toyota Tacoma 2011
  • Front
  • Rear
  • 2.7L L4 2694CC
  • Cutting and Welding Required During Installation
Toyota Tacoma 2012
  • Front
  • Rear
  • 2.7L L4 2694CC
  • Cutting and Welding Required During Installation
Toyota Tacoma 2013
  • Front
  • Rear
  • 2.7L L4 2694CC
  • Cutting and Welding Required During Installation
Toyota Tacoma 2014
  • Front
  • Rear
  • 2.7L L4 2694CC
  • Cutting and Welding Required During Installation
Toyota Tacoma 2015
  • Rear
  • Front
  • 2.7L L4 2694CC
  • Cutting and Welding Required During Installation
Toyota Tundra 2008
  • Right
  • 5.7L V8 5663CC/345CID
  • Cutting and Welding Required During Installation
Toyota Tundra 2009
  • Right
  • 5.7L V8 5663CC/345CID
  • Cutting and Welding Required During Installation
Toyota Tundra 2010
  • Right
  • 5.7L V8 5663CC/345CID
  • Cutting and Welding Required During Installation
Toyota Tundra 2014
  • Rear Right
  • Front Left
  • Front Right
  • Rear Left
  • 5.7L V8 5663CC/345CID
  • Cutting and Welding Required During Installation
Volkswagen CC 2009
  • Rear
  • 2L L4 1984CC/121CID
  • Cutting and Welding Required During Installation
Volkswagen CC 2010
  • Rear
  • 2L L4 1984CC/121CID
  • Cutting and Welding Required During Installation
Volkswagen CC 2011
  • Rear
  • 2L L4 1984CC/121CID
  • Cutting and Welding Required During Installation
Volkswagen CC 2012
  • Rear
  • 2L L4 1984CC/121CID
  • Cutting and Welding Required During Installation
Volkswagen CC 2013
  • Rear
  • 2L L4 1984CC/121CID
  • Cutting and Welding Required During Installation
Volkswagen CC 2014
  • Rear
  • 2L L4 1984CC/121CID
  • Cutting and Welding Required During Installation
Volkswagen Golf 1999
  • 2.8L V6
  • Cutting and Welding Required During Installation
Volkswagen Golf 2000
  • 2.8L V6
  • Cutting and Welding Required During Installation
Volkswagen Golf 2001
  • 2.8L V6
  • Cutting and Welding Required During Installation
Volkswagen Golf 2002
  • 2.8L V6
  • Cutting and Welding Required During Installation
Volkswagen Golf 2003
  • 2.8L V6
  • Cutting and Welding Required During Installation
Volkswagen Golf 2004
  • 2.8L V6
  • Cutting and Welding Required During Installation
Volkswagen Golf 2005
  • 2.8L V6
  • Cutting and Welding Required During Installation
Volkswagen Golf 2006
  • 2L L4 1984CC/121CID
  • Cutting and Welding Required During Installation
Volkswagen Jetta 1995
  • 2L L4 1984CC/121CID
  • Cutting and Welding Required During Installation
Volkswagen Jetta 1999
  • 2.8L V6
  • Cutting and Welding Required During Installation
Volkswagen Jetta 2000
  • 2.8L V6
  • Cutting and Welding Required During Installation
Volkswagen Jetta 2001
  • 2.8L V6
  • Cutting and Welding Required During Installation
Volkswagen Jetta 2002
  • 2.8L V6
  • Cutting and Welding Required During Installation
Volkswagen Jetta 2003
  • 2.8L V6
  • Cutting and Welding Required During Installation
Volkswagen Jetta 2004
  • 2.8L V6
  • Cutting and Welding Required During Installation
Volkswagen Jetta 2011
  • Rear
  • 2L L4 1984CC/121CID
  • 2.5L L5 2480CC/151CID
  • GAS
  • Cutting and Welding Required During Installation
Volkswagen Jetta 2012
  • Rear
  • 2L L4 1984CC/121CID
  • 2.5L L5 2480CC/151CID
  • GAS
  • Cutting and Welding Required During Installation
Volkswagen Jetta 2013
  • Rear
  • 2L L4 1984CC/121CID
  • 2.5L L5 2480CC/151CID
  • GAS
  • Cutting and Welding Required During Installation
Volkswagen Jetta 2014
  • Rear
  • 2L L4 1984CC/121CID
  • 2.5L L5 2480CC/151CID
  • Cutting and Welding Required During Installation
Volkswagen Passat 1998
  • Left
  • Right
  • 2.8L V6
  • Cutting and Welding Required During Installation
Volkswagen Passat 1999
  • Left
  • Right
  • 2.8L V6
  • Cutting and Welding Required During Installation
Volkswagen Passat 2000
  • Left
  • Right
  • 2.8L V6
  • AHA
  • Cutting and Welding Required During Installation
Volkswagen Passat 2006
  • Rear
  • 3.6L V6 3597CC/219CID
  • Cutting and Welding Required During Installation
Volkswagen Passat 2007
  • Rear
  • 3.6L V6 3597CC/219CID
  • Cutting and Welding Required During Installation
Volkswagen Passat 2008
  • Rear
  • 3.6L V6 3597CC/219CID
  • Cutting and Welding Required During Installation
Volvo S40 2000
  • Rear
  • 1.9L L4 1948CC
  • Cutting and Welding Required During Installation
Volvo S40 2001
  • Rear
  • 1.9L L4 1948CC
  • Cutting and Welding Required During Installation
Volvo S40 2002
  • Rear
  • 1.9L L4 1948CC
  • Cutting and Welding Required During Installation
Volvo S40 2003
  • Rear
  • 1.9L L4 1948CC
  • Cutting and Welding Required During Installation
Volvo S40 2004
  • Rear
  • 1.9L L4 1948CC
  • Cutting and Welding Required During Installation
Volvo V40 2001
  • Rear
  • 1.9L L4 1948CC
  • Cutting and Welding Required During Installation
Volvo V40 2002
  • Rear
  • 1.9L L4 1948CC
  • Cutting and Welding Required During Installation
Volvo V40 2003
  • Rear
  • 1.9L L4 1948CC
  • Cutting and Welding Required During Installation
Volvo V40 2004
  • Rear
  • 1.9L L4 1948CC
  • Cutting and Welding Required During Installation