100% BASÉ AU CANADA 100% CANADIEN
SANS FRAIS DE COURTAGE EN DOUANE SANS FRAIS DE DOUANE
MARCHAND AUTORISÉ MARCHAND AUTORISÉ
30 JOURS – RETOURS SANS TRACAS 30 JOURS – RETOURS

MagnaFlowStainless Federal OEM Grade Catalytic Converter with 1x O2 Sensor Port (2.25" IN\/2.25" OUT)

DISTRIBUTEUR AUTORISÉ

51355

Numéro de Pièce du Fabricant
*Les images sont à titre illustratif seulement. Le produit réel peut varier.
SKU: MAG-51355
Sélectionnez un véhicule pour vérifier la compatibilité.

Sélectionnez un Véhicule

Cela servira à vous montrer les pièces compatibles.

Auto Parts Finder

Ce produit n'est pas compatible avec votre sélection!

Le produit affiché sur cette page n'est pas compatible avec vehicle

!
Afin d'assurer la bonne compatibilité des pièces, veuillez parcourir des produits compatibles ou changer votre sélection.


Changer la Sélection Actuelle
Livraison GRATUITE*
Garantie Standard

Commande Spéciale
1-3 Semaines
277,00 CA $
Stainless Federal OEM Grade Catalytic Converter with 1x O2 Sensor Port (2.25" IN\/2.25" OUT) doit être acheté par multiple de 1
DISTRIBUTEUR AUTORISÉ

51355

Numéro de Pièce du Fabricant
Plus d’information
Fabricant MagnaFlow
Numéro de Pièce du Fabricant 51355
Prix de Détail Suggéré du Fabricant (MSRP) 215,78
Rédigez votre propre commentaire
Seuls les utilisateurs sauvegardés peuvent soumettre leur avis. Veuillez vous connecter ou créer un compte
This table represents all the 234 compatible vehicles for this part:
Marque Modèle Année
Application Notes
Position Submodel Transmission Drive Type Engine Aspiration Additional Information
Acura RSX 2002
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Acura RSX 2003
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Acura RSX 2004
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Acura RSX 2005
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Acura RSX 2006
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Audi A4 Quattro 2002
  • Left
  • Right
  • 3L V6 2976CC
  • Cutting and Welding Required During Installation
Audi A4 Quattro 2003
  • Left
  • Right
  • 3L V6 2976CC
  • Cutting and Welding Required During Installation
Audi A4 Quattro 2004
  • Left
  • Right
  • Avant
  • Base
  • Cabriolet
  • 3L V6 2976CC
  • Cutting and Welding Required During Installation
Audi A6 Quattro 2002
  • Left
  • Right
  • 3L V6 2976CC
  • Cutting and Welding Required During Installation
Audi A6 Quattro 2003
  • Left
  • Right
  • 3L V6 2976CC
  • Cutting and Welding Required During Installation
Audi A6 Quattro 2004
  • Left
  • Right
  • 3L V6 2976CC
  • Cutting and Welding Required During Installation
Audi A4 2002
  • Left
  • Right
  • Automatic
  • 3L V6 2976CC
  • Cutting and Welding Required During Installation
Audi A4 2003
  • Left
  • Right
  • Automatic
  • 3L V6 2976CC
  • Cutting and Welding Required During Installation
Audi A4 2004
  • Left
  • Right
  • Automatic
  • 3L V6 2976CC
  • Cutting and Welding Required During Installation
Audi A6 2002
  • Left
  • Right
  • 3L V6 2976CC
  • Cutting and Welding Required During Installation
Audi A6 2003
  • Left
  • Right
  • 3L V6 2976CC
  • Cutting and Welding Required During Installation
Audi A6 2004
  • Left
  • Right
  • 3L V6 2976CC
  • Cutting and Welding Required During Installation
Chrysler 200 2011
  • 2.4L L4 2360CC/144CID
  • Cutting and Welding Required During Installation
Chrysler 200 2012
  • 2.4L L4 2360CC/144CID
  • Cutting and Welding Required During Installation
Chrysler 200 2013
  • 2.4L L4 2360CC/144CID
  • Cutting and Welding Required During Installation
Chrysler 200 2014
  • 2.4L L4 2360CC/144CID
  • Cutting and Welding Required During Installation
Chrysler 300 2005
  • Left
  • Right
  • 3.5L V6 3497CC/215CID
  • 2.7L V6 2700CC/167CID
  • Cutting and Welding Required During Installation
Chrysler 300 2006
  • Left
  • Right
  • 3.5L V6 3497CC/215CID
  • 2.7L V6 2700CC/167CID
  • Cutting and Welding Required During Installation
Chrysler 300 2007
  • Left
  • Right
  • 3.5L V6 3497CC/215CID
  • 2.7L V6 2700CC/167CID
  • Cutting and Welding Required During Installation
Chrysler 300 2008
  • Left
  • Right
  • Limited
  • Touring
  • 3.5L V6 3497CC/215CID
  • 2.7L V6 2700CC/167CID
  • Cutting and Welding Required During Installation
Chrysler 300 2009
  • Left
  • Right
  • Limited
  • LX
  • Touring
  • 3.5L V6 3497CC/215CID
  • 2.7L V6 2700CC/167CID
  • Cutting and Welding Required During Installation
Chrysler Aspen 2008
  • 4.7L V8 287CID
  • Cutting and Welding Required During Installation
Chrysler Sebring 2007
  • 2.4L L4 2360CC/144CID
  • Cutting and Welding Required During Installation
Chrysler Sebring 2008
  • 2.4L L4 2360CC/144CID
  • Cutting and Welding Required During Installation
Chrysler Sebring 2009
  • 2.4L L4 2360CC/144CID
  • Cutting and Welding Required During Installation
Chrysler Sebring 2010
  • 2.4L L4 2360CC/144CID
  • Cutting and Welding Required During Installation
Chrysler Town & Country 2001
  • 3.8L V6 3778CC/231CID
  • Cutting and Welding Required During Installation
Chrysler Town & Country 2002
  • 3.8L V6 3778CC/231CID
  • Cutting and Welding Required During Installation
Chrysler Town & Country 2003
  • 3.8L V6 3778CC/231CID
  • Cutting and Welding Required During Installation
Chrysler Town & Country 2004
  • 3.8L V6 3778CC/231CID
  • Cutting and Welding Required During Installation
Chrysler Voyager 2001
  • 2.4L L4 2429CC/148CID
  • Cutting and Welding Required During Installation
Chrysler Voyager 2002
  • 2.4L L4 2429CC/148CID
  • Cutting and Welding Required During Installation
Chrysler Voyager 2003
  • 2.4L L4 2429CC/148CID
  • Cutting and Welding Required During Installation
Dodge Avenger 2008
  • 2.4L L4 2360CC/144CID
  • Cutting and Welding Required During Installation
Dodge Avenger 2009
  • 2.4L L4 2360CC/144CID
  • Cutting and Welding Required During Installation
Dodge Avenger 2010
  • 2.4L L4 2360CC/144CID
  • Cutting and Welding Required During Installation
Dodge Avenger 2011
  • 2.4L L4 2360CC/144CID
  • Cutting and Welding Required During Installation
Dodge Avenger 2012
  • 2.4L L4 2360CC/144CID
  • Cutting and Welding Required During Installation
Dodge Avenger 2013
  • 2.4L L4 2360CC/144CID
  • Cutting and Welding Required During Installation
Dodge Avenger 2014
  • 2.4L L4 2360CC/144CID
  • Cutting and Welding Required During Installation
Dodge Caliber 2007
  • 2.4L L4 2360CC/144CID
  • 1.8L L4 1798CC/110CID
  • 2L L4 1998CC/122CID
  • without Manifold Converter
  • Cutting and Welding Required During Installation
Dodge Caliber 2008
  • R/T
  • 2.4L L4 2360CC/144CID
  • 1.8L L4 1798CC/110CID
  • 2L L4 1998CC/122CID
  • without Manifold Converter
  • Cutting and Welding Required During Installation
Dodge Caliber 2009
  • R/T
  • 2.4L L4 2360CC/144CID
  • 1.8L L4 1798CC/110CID
  • 2L L4 1998CC/122CID
  • without Manifold Converter
  • Cutting and Welding Required During Installation
Dodge Caliber 2011
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Dodge Caravan 2001
  • 2.4L L4 2429CC/148CID
  • Cutting and Welding Required During Installation
Dodge Caravan 2002
  • 2.4L L4 2429CC/148CID
  • Cutting and Welding Required During Installation
Dodge Caravan 2003
  • 2.4L L4 2429CC/148CID
  • Cutting and Welding Required During Installation
Dodge Caravan 2004
  • 2.4L L4 2429CC/148CID
  • Cutting and Welding Required During Installation
Dodge Challenger 2009
  • Left
  • Right
  • 3.5L V6 3497CC/215CID
  • Cutting and Welding Required During Installation
Dodge Challenger 2010
  • Right
  • Left
  • 3.5L V6 3497CC/215CID
  • Cutting and Welding Required During Installation
Dodge Charger 2007
  • Left
  • Right
  • 2.7L V6 2700CC/167CID
  • Cutting and Welding Required During Installation
Dodge Charger 2008
  • Left
  • Right
  • 3.5L V6 3497CC/215CID
  • 2.7L V6 2700CC/167CID
  • Cutting and Welding Required During Installation
Dodge Charger 2009
  • Left
  • Right
  • 3.5L V6 3497CC/215CID
  • 2.7L V6 2700CC/167CID
  • Cutting and Welding Required During Installation
Dodge Charger 2010
  • Left
  • Right
  • 3.5L V6 3497CC/215CID
  • 2.7L V6 2700CC/167CID
  • Cutting and Welding Required During Installation
Dodge Durango 2008
  • 3.7L V6 226CID
Dodge Durango 2009
  • 3.7L V6 226CID
Dodge Grand Caravan 2001
  • 3.8L V6 3778CC/231CID
  • Cutting and Welding Required During Installation
Dodge Grand Caravan 2002
  • 3.8L V6 3778CC/231CID
  • Cutting and Welding Required During Installation
Dodge Grand Caravan 2003
  • 3.8L V6 3778CC/231CID
  • Cutting and Welding Required During Installation
Dodge Grand Caravan 2004
  • 3.8L V6 3778CC/231CID
  • Cutting and Welding Required During Installation
Dodge Journey 2009
  • 2.4L L4 2360CC/144CID
  • Cutting and Welding Required During Installation
Dodge Journey 2014
  • 2.4L L4 2360CC/144CID
  • Cutting and Welding Required During Installation
Dodge Magnum 2005
  • Left
  • Right
  • 2.7L V6 2700CC/167CID
  • Cutting and Welding Required During Installation
Dodge Magnum 2006
  • Left
  • Right
  • 2.7L V6 2700CC/167CID
  • Cutting and Welding Required During Installation
Dodge Magnum 2007
  • Left
  • Right
  • SE
  • 2.7L V6 2700CC/167CID
  • Cutting and Welding Required During Installation
Dodge Magnum 2008
  • Left
  • Right
  • SE
  • SXT
  • 3.5L V6 3497CC/215CID
  • 2.7L V6 2700CC/167CID
  • Cutting and Welding Required During Installation
Dodge Neon 2000
  • 2L L4 1996CC/122CID
  • Federal Transitional Low Emissions Vehicles (TLEV)
  • 2in. Outlet
  • Cutting and Welding Required During Installation
Dodge Neon 2001
  • 2L L4 1996CC/122CID
  • Federal Transitional Low Emissions Vehicles (TLEV)
  • 2in. Outlet
  • Cutting and Welding Required During Installation
Dodge Nitro 2007
  • Right
  • Left
  • 3.7L V6 226CID
  • Cutting and Welding Required During Installation
Dodge Nitro 2008
  • Right
  • Left
  • 3.7L V6 226CID
  • Cutting and Welding Required During Installation
Dodge Nitro 2009
  • Left
  • Right
  • 3.7L V6 226CID
  • Cutting and Welding Required During Installation
Dodge Ram 1500 Pickup 2006
  • 5.7L V8 345CID
  • without Solid Front Axle
  • Cutting and Welding Required During Installation
Dodge Ram 1500 Pickup 2007
  • 5.7L V8 345CID
  • without Solid Front Axle
  • Cutting and Welding Required During Installation
Dodge Ram 1500 Pickup 2008
  • 5.7L V8 345CID
  • Cutting and Welding Required During Installation
Dodge Ram 1500 Pickup 2009
  • 5.7L V8 345CID
  • Cutting and Welding Required During Installation
Ford F-150 Heritage 2004
  • Rear Right
  • Rear Left
  • RWD
  • 4.2L V6 256CID
  • Cutting and Welding Required During Installation
Ford F-150 2004
  • Rear Right
  • Rear Left
  • 4WD
  • 5.4L V8 330CID
  • Cutting and Welding Required During Installation
Ford F-150 2005
  • Rear Right
  • Rear Left
  • 4WD
  • 5.4L V8 330CID
  • Cutting and Welding Required During Installation
Ford F-150 2006
  • Rear Right
  • Rear Left
  • 4WD
  • 5.4L V8 330CID
  • Cutting and Welding Required During Installation
Ford Focus 2000
  • Automatic
  • 2L L4 1989CC/121CID
  • 3
  • Cutting and Welding Required During Installation
Ford Focus 2001
  • Automatic
  • 2L L4 1989CC/121CID
  • 3
  • Cutting and Welding Required During Installation
Ford Focus 2002
  • Automatic
  • 2L L4 1989CC/121CID
  • 3
  • Cutting and Welding Required During Installation
Ford Focus 2003
  • Automatic
  • 2L L4 1989CC/121CID
  • 3
  • Cutting and Welding Required During Installation
Ford Focus 2004
  • Automatic
  • 2L L4 1989CC/121CID
  • 3
  • Cutting and Welding Required During Installation
Ford Mustang 1999
  • Left
  • Right
  • 3.8L V6 232CID
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Ford Mustang 2000
  • Left
  • Right
  • 3.8L V6 232CID
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Ford Mustang 2001
  • Left
  • Right
  • 3.8L V6 232CID
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Ford Mustang 2002
  • Left
  • Right
  • 3.8L V6 232CID
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Ford Mustang 2003
  • Left
  • Right
  • 3.8L V6 232CID
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Ford Mustang 2004
  • Left
  • Right
  • 3.8L V6 232CID
  • 3.9L V6 238CID
  • Cutting and Welding Required During Installation
Ford Mustang 2005
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford Mustang 2006
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford Mustang 2007
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford Mustang 2008
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford Mustang 2009
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford Mustang 2010
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford Ranger 2007
  • Left
  • Right
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford Ranger 2008
  • Left
  • Right
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford Ranger 2009
  • Right
  • Left
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford Ranger 2010
  • Left
  • Right
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford Ranger 2011
  • Right
  • Left
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Honda Civic 2002
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Honda Civic 2003
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Honda Civic 2004
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Honda Civic 2005
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Honda Pilot 2003
  • 3.5L V6 3475CC
  • Cutting and Welding Required During Installation
Honda Pilot 2004
  • 3.5L V6 3475CC
  • Cutting and Welding Required During Installation
Honda S2000 2006
  • 2.2L L4 2157CC
  • Cutting and Welding Required During Installation
Honda S2000 2007
  • 2.2L L4 2157CC
  • Cutting and Welding Required During Installation
Honda S2000 2008
  • 2.2L L4 2157CC
  • Cutting and Welding Required During Installation
Honda S2000 2009
  • 2.2L L4 2157CC
  • Cutting and Welding Required During Installation
Hyundai Tucson 2016
  • FWD
  • 2L L4 1999CC
Hyundai Tucson 2017
  • FWD
  • 2L L4 1999CC
Jaguar X-Type 2003
  • 2.5L V6 152CID
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Jaguar X-Type 2004
  • 2.5L V6 152CID
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Jeep Compass 2007
  • FWD
  • 2.4L L4 2360CC/144CID
  • Cutting and Welding Required During Installation
Jeep Compass 2008
  • 2L L4 1998CC/122CID
  • 2.4L L4 2360CC/144CID
  • Cutting and Welding Required During Installation
Jeep Compass 2009
  • FWD
  • 2.4L L4 2360CC/144CID
  • Cutting and Welding Required During Installation
Jeep Liberty 2002
  • Front Left
  • Front Right
  • 3.7L V6 226CID
  • Cutting and Welding Required During Installation
Jeep Liberty 2003
  • Front Left
  • Front Right
  • 3.7L V6 226CID
  • Cutting and Welding Required During Installation
Jeep Patriot 2008
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Jeep Wrangler 2005
  • 2.4L L4 148CID
  • Cutting and Welding Required During Installation
Jeep Wrangler 2006
  • 2.4L L4 148CID
  • Cutting and Welding Required During Installation
Kia Soul 2012
  • 2L L4 1999CC/122CID
Kia Soul 2013
  • 2L L4 1999CC/122CID
Lincoln Mark LT 2007
  • Left
  • 5.4L V8 330CID
  • Cutting and Welding Required During Installation
Lincoln Mark LT 2008
  • Left
  • 5.4L V8 330CID
  • Cutting and Welding Required During Installation
Lincoln Navigator 2005
  • Right
  • Left
  • 5.4L V8 330CID
  • Cutting and Welding Required During Installation
Lincoln Navigator 2006
  • Left
  • Right
  • 5.4L V8 330CID
  • Cutting and Welding Required During Installation
Mazda B2300 2001
  • Rear
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Mazda B2300 2002
  • Rear
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Mazda B2300 2003
  • Rear
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Mazda B2300 2004
  • Rear
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Mazda B2300 2005
  • Rear
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Mazda B2300 2006
  • Rear
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Mazda B2300 2007
  • Rear
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Mazda B2300 2008
  • Rear
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Mazda B2300 2009
  • Rear
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Mazda B4000 2007
  • Left
  • Right
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Mazda B4000 2008
  • Left
  • Right
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Mazda Miata 1999
  • Front
  • 1.8L L4 1839CC
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Mazda Miata 2000
  • Front
  • 1.8L L4 1839CC
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Mazda Miata 2001
  • Front
  • 1.8L L4 1839CC
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Mazda Miata 2002
  • Front
  • 1.8L L4 1839CC
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Mazda Miata 2003
  • Front
  • 1.8L L4 1839CC
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Mazda Miata 2004
  • Front
  • 1.8L L4 1839CC
  • Naturally Aspirated
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Mazda Miata 2005
  • Front
  • 1.8L L4 1839CC
  • Naturally Aspirated
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Mercedes-Benz CL550 2007
  • Left
  • Right
  • 5.5L V8
Mercedes-Benz CL550 2008
  • Left
  • Right
  • 5.5L V8
Mercedes-Benz CLS550 2007
  • Front Left
  • Front Right
  • 5.5L V8
Mercedes-Benz CLS550 2008
  • Front Left
  • Front Right
  • 5.5L V8
Mercedes-Benz CLS550 2009
  • Front Left
  • Front Right
  • 5.5L V8
Mercedes-Benz CLS550 2010
  • Front Left
  • Front Right
  • 5.5L V8
Mercedes-Benz CLS550 2011
  • Front Left
  • Front Right
  • 5.5L V8
Mercedes-Benz E350 2007
  • Front
  • Base
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Mercedes-Benz E350 2008
  • Front
  • Base
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Mercedes-Benz E350 2009
  • Front
  • Base
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Mercedes-Benz E550 2007
  • Front Left
  • Front Right
  • 5.5L V8
Mercedes-Benz E550 2008
  • Front Left
  • Front Right
  • 5.5L V8
Mercedes-Benz S550 2007
  • Left
  • Right
  • Base
  • 5.5L V8
Mercedes-Benz S550 2008
  • Left
  • Right
  • Base
  • 5.5L V8
Mercedes-Benz S550 2009
  • Left
  • Right
  • Base
  • 5.5L V8
Mercedes-Benz S550 2010
  • Left
  • Right
  • Base
  • 5.5L V8
Mercedes-Benz S550 2011
  • Left
  • Right
  • Base
  • 5.5L V8
Mitsubishi Outlander 2007
  • 3L V6 2998CC/182CID
  • Cutting and Welding Required During Installation
Mitsubishi Outlander 2008
  • 3L V6 2998CC/182CID
  • Cutting and Welding Required During Installation
Mitsubishi Outlander 2009
  • 3L V6 2998CC/182CID
  • Cutting and Welding Required During Installation
Nissan Frontier 2002
  • Rear Right
  • Rear Left
  • 3.3L V6 3275CC
  • Supercharged
  • Cutting and Welding Required During Installation
Nissan Frontier 2003
  • Rear Right
  • Rear Left
  • 3.3L V6 3275CC
  • Supercharged
  • Cutting and Welding Required During Installation
Nissan Frontier 2004
  • Right
  • Left
  • 3.3L V6 3275CC
  • Supercharged
  • Cutting and Welding Required During Installation
Nissan Sentra 1998
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Nissan Sentra 1999
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Nissan Sentra 2000
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Nissan Sentra 2001
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Plymouth Neon 2000
  • 2L L4 1996CC/122CID
  • Federal Transitional Low Emissions Vehicles (TLEV)
  • 2in. Outlet
  • Cutting and Welding Required During Installation
Toyota Sequoia 2005
  • Right
  • Left
  • 4.7L V8 4663CC/285CID
  • Cutting and Welding Required During Installation
Toyota Sequoia 2006
  • Left
  • Right
  • 4.7L V8 4663CC/285CID
  • Cutting and Welding Required During Installation
Toyota Sequoia 2007
  • Left
  • Right
  • 4.7L V8 4663CC/285CID
  • Cutting and Welding Required During Installation
Toyota Tundra 2005
  • Front Left
  • Front Right
  • 4.7L V8 4663CC/285CID
  • Cutting and Welding Required During Installation
  • Split Date From: 08/2004
Toyota Tundra 2006
  • Front Left
  • Front Right
  • 4.7L V8 4663CC/285CID
  • Cutting and Welding Required During Installation
Volkswagen Beetle 1999
  • 1.8L L4 1781CC
  • Cutting and Welding Required During Installation
Volkswagen Beetle 2000
  • 1.8L L4 1781CC
  • Cutting and Welding Required During Installation
Volkswagen Beetle 2001
  • 1.8L L4 1781CC
  • Cutting and Welding Required During Installation
Volkswagen Beetle 2002
  • 2L L4 1984CC/121CID
  • 1.8L L4 1781CC
  • Cutting and Welding Required During Installation
Volkswagen Beetle 2003
  • 2L L4 1984CC/121CID
  • 1.8L L4 1781CC
  • Cutting and Welding Required During Installation
Volkswagen Beetle 2004
  • 2L L4 1984CC/121CID
  • 1.8L L4 1781CC
  • Cutting and Welding Required During Installation
Volkswagen Beetle 2005
  • 2L L4 1984CC/121CID
  • Cutting and Welding Required During Installation
Volkswagen Beetle 2006
  • 2.5L L5 2480CC/151CID
  • Cutting and Welding Required During Installation
Volkswagen Beetle 2007
  • 2.5L L5 2480CC/151CID
  • Cutting and Welding Required During Installation
Volkswagen Beetle 2008
  • 2.5L L5 2480CC/151CID
  • Cutting and Welding Required During Installation
Volkswagen Beetle 2009
  • 2.5L L5 2480CC/151CID
  • Cutting and Welding Required During Installation
Volkswagen Beetle 2010
  • 2.5L L5 2480CC/151CID
  • Cutting and Welding Required During Installation
Volkswagen Cabrio 1995
  • 2L L4 1984CC/121CID
  • Cutting and Welding Required During Installation
Volkswagen Cabrio 1996
  • 2L L4 1984CC/121CID
  • Cutting and Welding Required During Installation
Volkswagen Cabrio 1997
  • 2L L4 1984CC/121CID
  • Cutting and Welding Required During Installation
Volkswagen Cabrio 1998
  • 2L L4 1984CC/121CID
  • Cutting and Welding Required During Installation
Volkswagen Cabrio 1999
  • 2L L4 1984CC/121CID
  • Cutting and Welding Required During Installation
Volkswagen Cabrio 2000
  • 2L L4 1984CC/121CID
  • Cutting and Welding Required During Installation
Volkswagen Cabrio 2001
  • 2L L4 1984CC/121CID
  • Cutting and Welding Required During Installation
Volkswagen Cabrio 2002
  • 2L L4 1984CC/121CID
  • Cutting and Welding Required During Installation
Volkswagen Golf 1999
  • 2L L4 1984CC/121CID
  • AEG
  • Cutting and Welding Required During Installation
Volkswagen Golf 2000
  • 2L L4 1984CC/121CID
  • 1.8L L4 1781CC
  • Cutting and Welding Required During Installation
Volkswagen Golf 2001
  • 2L L4 1984CC/121CID
  • 1.8L L4 1781CC
  • Cutting and Welding Required During Installation
Volkswagen Golf 2002
  • 2L L4 1984CC/121CID
  • 1.8L L4 1781CC
  • Cutting and Welding Required During Installation
Volkswagen Golf 2003
  • 2L L4 1984CC/121CID
  • 1.8L L4 1781CC
  • Cutting and Welding Required During Installation
Volkswagen Golf 2004
  • 1.8L L4 1781CC
  • 2L L4 1984CC/121CID
  • Cutting and Welding Required During Installation
Volkswagen Golf 2005
  • 1.8L L4 1781CC
  • 2L L4 1984CC/121CID
  • Cutting and Welding Required During Installation
Volkswagen Golf 2006
  • 1.8L L4 1781CC
  • Cutting and Welding Required During Installation
Volkswagen Golf 2010
  • 2.5L L5 2480CC/151CID
  • Cutting and Welding Required During Installation
Volkswagen Golf 2011
  • 2.5L L5 2480CC/151CID
  • Cutting and Welding Required During Installation
Volkswagen Jetta 1999
  • 2L L4 1984CC/121CID
  • AEG
  • Cutting and Welding Required During Installation
Volkswagen Jetta 2000
  • 1.8L L4 1781CC
  • 2L L4 1984CC/121CID
  • Cutting and Welding Required During Installation
Volkswagen Jetta 2001
  • 1.8L L4 1781CC
  • 2L L4 1984CC/121CID
  • Cutting and Welding Required During Installation
  • AEG
Volkswagen Jetta 2002
  • 1.8L L4 1781CC
  • Cutting and Welding Required During Installation
Volkswagen Jetta 2003
  • 1.8L L4 1781CC
  • Cutting and Welding Required During Installation
Volkswagen Jetta 2004
  • 2L L4 1984CC/121CID
  • 1.8L L4 1781CC
  • BBW
  • Cutting and Welding Required During Installation
Volkswagen Jetta 2005
  • 2.5L L5 2480CC/151CID
  • 2L L4 1984CC/121CID
  • 1.8L L4 1781CC
  • Cutting and Welding Required During Installation
  • BBW
Volkswagen Jetta 2006
  • 2.5L L5 2480CC/151CID
  • Cutting and Welding Required During Installation
Volkswagen Jetta 2007
  • 2.5L L5 2480CC/151CID
  • Cutting and Welding Required During Installation
Volkswagen Jetta 2008
  • 2.5L L5 2480CC/151CID
  • Cutting and Welding Required During Installation
Volkswagen Jetta 2009
  • 2.5L L5 2480CC/151CID
  • Cutting and Welding Required During Installation
Volkswagen Jetta 2010
  • 2.5L L5 2480CC/151CID
  • Cutting and Welding Required During Installation
Volkswagen Rabbit 2006
  • 2.5L L5 2480CC/151CID
  • Cutting and Welding Required During Installation
Volkswagen Rabbit 2007
  • 2.5L L5 2480CC/151CID
  • Cutting and Welding Required During Installation
Volkswagen Rabbit 2008
  • 2.5L L5 2480CC/151CID
  • Cutting and Welding Required During Installation
Volkswagen Rabbit 2009
  • 2.5L L5 2480CC/151CID
  • Cutting and Welding Required During Installation
Volvo S40 2004
  • 2.4L L5 2435CC
  • Ultra Low Emissions Vehicles (ULEV)
  • Cutting and Welding Required During Installation
Volvo S40 2010
  • 2.4L L5 2435CC
  • B5244S4
  • Ultra Low Emissions Vehicles (ULEV)
  • Cutting and Welding Required During Installation
Volvo V50 2010
  • 2.4L L5 2435CC
  • Ultra Low Emissions Vehicles (ULEV)
  • Cutting and Welding Required During Installation