Grève chez Postes Canada - Temps en transit non affectésAutres transporteurs utilisés; à l'exception des cases postales
100% BASÉ AU CANADA 100% CANADIEN
SANS FRAIS DE COURTAGE EN DOUANE SANS FRAIS DE DOUANE
MARCHAND AUTORISÉ MARCHAND AUTORISÉ
30 JOURS – RETOURS SANS TRACAS 30 JOURS – RETOURS

MagnaFlowStainless Federal OEM Grade Catalytic Converter without Sensor Port (2" IN\/2" OUT)

DISTRIBUTEUR AUTORISÉ

51004

Numéro de Pièce du Fabricant
*Les images sont à titre illustratif seulement. Le produit réel peut varier.
SKU: MAG-51004
Sélectionnez un véhicule pour vérifier la compatibilité.

Sélectionnez un Véhicule

Cela servira à vous montrer les pièces compatibles.

Auto Parts Finder

Ce produit n'est pas compatible avec votre sélection!

Le produit affiché sur cette page n'est pas compatible avec vehicle

!
Afin d'assurer la bonne compatibilité des pièces, veuillez parcourir des produits compatibles ou changer votre sélection.


Changer la Sélection Actuelle
Livraison GRATUITE*
Garantie Standard

Commande Spéciale
1-3 Semaines
316,00 CA $
Stainless Federal OEM Grade Catalytic Converter without Sensor Port (2" IN\/2" OUT) doit être acheté par multiple de 1
DISTRIBUTEUR AUTORISÉ

51004

Numéro de Pièce du Fabricant
Plus d’information
Fabricant MagnaFlow
Numéro de Pièce du Fabricant 51004
Prix de Détail Suggéré du Fabricant (MSRP) 189,04
Rédigez votre propre commentaire
Seuls les utilisateurs sauvegardés peuvent soumettre leur avis. Veuillez vous connecter ou créer un compte
This table represents all the 193 compatible vehicles for this part:
Marque Modèle Année
Application Notes
Position Transmission Drive Type Engine Aspiration Additional Information
Chevrolet Metro 2001
  • Rear
  • 1.3L L4 1295CC/79cCID
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Daewoo Lanos 1999
  • Rear
  • 1.6L L4 1588CC/98cCID
  • Cutting and Welding Required During Installation
Daewoo Lanos 2000
  • Rear
  • 1.6L L4 1588CC/98cCID
  • Cutting and Welding Required During Installation
Daewoo Lanos 2001
  • Rear
  • 1.6L L4 1588CC/98cCID
  • Cutting and Welding Required During Installation
Daewoo Lanos 2002
  • Rear
  • 1.6L L4 1588CC/98cCID
  • Cutting and Welding Required During Installation
Daewoo Nubira 1999
  • Rear
  • Automatic
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Daewoo Nubira 2000
  • Rear
  • Automatic
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Daewoo Nubira 2001
  • Rear
  • Automatic
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Daewoo Nubira 2002
  • Rear
  • Automatic
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Dodge Dakota 1999
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Dodge Dakota 2000
  • RWD
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Dodge Dakota 2001
  • RWD
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Dodge Dakota 2002
  • RWD
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Dodge Ram 1500 Pickup 2002
  • RWD
  • 4.7L V8 287CID
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Dodge Ram 1500 Pickup 2003
  • RWD
  • 4.7L V8 287CID
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Ford Crown Victoria 2003
  • Rear Right
  • Rear Left
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Ford Crown Victoria 2004
  • Rear Right
  • Rear Left
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Ford Crown Victoria 2005
  • Rear Right
  • Rear Left
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Ford Crown Victoria 2006
  • Rear Right
  • Rear Left
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Ford Crown Victoria 2007
  • Rear Right
  • Rear Left
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Ford Escape 2001
  • Rear
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Ford Escape 2002
  • Rear
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Ford Escape 2003
  • Rear
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Ford Escape 2004
  • Rear
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Ford Escort 1998
  • 2L L4 1989CC/121CID
  • P
  • Cutting and Welding Required During Installation
Ford Escort 1999
  • 2L L4 1989CC/121CID
  • P
  • Cutting and Welding Required During Installation
Ford Escort 2000
  • 2L L4 1989CC/121CID
  • P
  • Cutting and Welding Required During Installation
Ford Escort 2001
  • 2L L4 1989CC/121CID
  • P
  • Cutting and Welding Required During Installation
Ford Five Hundred 2005
  • Center
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Ford Five Hundred 2006
  • Center
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Ford Five Hundred 2007
  • Center
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Ford Focus 2000
  • 2L L4 1989CC/121CID
  • P
  • Cutting and Welding Required During Installation
Ford Focus 2001
  • 2L L4 1989CC/121CID
  • P
  • Cutting and Welding Required During Installation
Ford Focus 2002
  • 2L L4 1989CC/121CID
  • P
  • Cutting and Welding Required During Installation
Ford Focus 2003
  • 2L L4 1989CC/121CID
  • P
  • Cutting and Welding Required During Installation
Ford Focus 2004
  • 2L L4 1989CC/121CID
  • P
  • Cutting and Welding Required During Installation
Ford Freestyle 2005
  • Front
  • Center
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Ford Freestyle 2006
  • Front
  • Center
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Ford Freestyle 2007
  • Front
  • Center
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Hyundai Sonata 1999
  • Rear
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Hyundai Sonata 2000
  • Rear
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Hyundai Sonata 2001
  • Rear
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Hyundai Sonata 2002
  • Rear
  • 2.4L L4 2351CC
  • 2.7L V6 2656CC
  • Cutting and Welding Required During Installation
Hyundai Sonata 2003
  • Rear
  • 2.4L L4 2351CC
  • 2.7L V6 2656CC
  • Cutting and Welding Required During Installation
Hyundai Sonata 2004
  • Rear
  • 2.4L L4 2351CC
  • 2.7L V6 2656CC
  • Cutting and Welding Required During Installation
Hyundai Sonata 2005
  • Rear
  • 2.4L L4 2351CC
  • 2.7L V6 2656CC
  • Cutting and Welding Required During Installation
Hyundai Tucson 2005
  • 2.7L V6 2656CC
  • Cutting and Welding Required During Installation
Hyundai Tucson 2006
  • 2.7L V6 2656CC
  • Cutting and Welding Required During Installation
Hyundai Tucson 2007
  • 2.7L V6 2656CC
  • Cutting and Welding Required During Installation
Hyundai Tucson 2008
  • 2.7L V6 2656CC
  • Cutting and Welding Required During Installation
Hyundai Tucson 2009
  • 2.7L V6 2656CC
  • Cutting and Welding Required During Installation
Infiniti QX4 2001
  • Left
  • Right
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Infiniti QX4 2002
  • Left
  • Right
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Infiniti QX4 2003
  • Left
  • Right
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Jaguar S-Type 2000
  • Right
  • Left
  • 4L V8 3996CC/244CID
  • Cutting and Welding Required During Installation
Jaguar S-Type 2001
  • Left
  • Right
  • 4L V8 3996CC/244CID
  • Cutting and Welding Required During Installation
Jaguar S-Type 2002
  • Left
  • Right
  • 4L V8 3996CC/244CID
  • Cutting and Welding Required During Installation
Kia Optima 2002
  • Rear
  • 2.4L L4 2351CC
  • 2.7L V6 2656CC
  • Cutting and Welding Required During Installation
Kia Optima 2003
  • Rear
  • 2.4L L4 2351CC
  • 2.7L V6 2656CC
  • Cutting and Welding Required During Installation
Kia Optima 2004
  • Rear
  • 2.4L L4 2351CC
  • 2.7L V6 2656CC
  • Cutting and Welding Required During Installation
Kia Optima 2005
  • Rear
  • 2.4L L4 2351CC
  • 2.7L V6 2656CC
  • Cutting and Welding Required During Installation
Kia Optima 2006
  • 2.7L V6 2656CC
  • Cutting and Welding Required During Installation
Kia Sephia 1998
  • Rear
  • 1.8L L4 1793CC
  • Cutting and Welding Required During Installation
Kia Sephia 1999
  • Rear
  • 1.8L L4 1793CC
  • Cutting and Welding Required During Installation
Kia Sephia 2000
  • Rear
  • 1.8L L4 1793CC
  • Cutting and Welding Required During Installation
Kia Sephia 2001
  • Rear
  • 1.8L L4 1793CC
  • Cutting and Welding Required During Installation
Kia Spectra 2000
  • Rear
  • 1.8L L4 1793CC
  • Cutting and Welding Required During Installation
Kia Spectra 2001
  • Rear
  • 1.8L L4 1793CC
  • Cutting and Welding Required During Installation
  • Split Date To: To 05/22/2001
  • Split Date From: From 05/22/2001
Kia Spectra 2002
  • 1.8L L4 1793CC
  • Cutting and Welding Required During Installation
Kia Spectra 2003
  • 1.8L L4 1793CC
  • Cutting and Welding Required During Installation
Kia Spectra 2004
  • 2L L4 1975CC
  • 1.8L L4 1793CC
  • Cutting and Welding Required During Installation
Kia Spectra 2005
  • 2L L4 1975CC
  • Cutting and Welding Required During Installation
Kia Spectra 2006
  • 2L L4 1975CC
  • Cutting and Welding Required During Installation
Kia Spectra 2007
  • 2L L4 1975CC
  • Cutting and Welding Required During Installation
Kia Spectra5 2005
  • 2L L4 1975CC
  • Cutting and Welding Required During Installation
Kia Spectra5 2006
  • 2L L4 1975CC
  • Cutting and Welding Required During Installation
Kia Spectra5 2007
  • 2L L4 1975CC
  • Cutting and Welding Required During Installation
Kia Sportage 2001
  • Rear
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Kia Sportage 2002
  • Rear
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Kia Sportage 2005
  • 2.7L V6 2656CC
  • Cutting and Welding Required During Installation
Kia Sportage 2006
  • 2.7L V6 2656CC
  • Cutting and Welding Required During Installation
Kia Sportage 2007
  • 2.7L V6 2656CC
  • Cutting and Welding Required During Installation
Kia Sportage 2008
  • 2.7L V6 2656CC
  • Cutting and Welding Required During Installation
Kia Sportage 2009
  • 2.7L V6 2656CC
  • Cutting and Welding Required During Installation
Kia Sportage 2010
  • 2.7L V6 2656CC
  • Cutting and Welding Required During Installation
Lincoln Continental 1998
  • Front Right
  • Front Left
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Lincoln Continental 1999
  • Front Right
  • Front Left
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Lincoln Continental 2000
  • Front Right
  • Front Left
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Lincoln Continental 2001
  • Front Right
  • Front Left
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Lincoln Continental 2002
  • Front Right
  • Front Left
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Lincoln LS 2000
  • Left
  • Right
  • 3.9L V8 242CID
  • Cutting and Welding Required During Installation
Lincoln LS 2001
  • Left
  • Right
  • 3.9L V8 242CID
  • Cutting and Welding Required During Installation
Lincoln LS 2002
  • Left
  • Right
  • 3.9L V8 242CID
  • Cutting and Welding Required During Installation
Lincoln Town Car 2003
  • Rear Left
  • Rear Right
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Lincoln Town Car 2004
  • Rear Left
  • Rear Right
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Lincoln Town Car 2005
  • Rear Left
  • Rear Right
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Lincoln Town Car 2006
  • Rear Left
  • Rear Right
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Mazda 5 2008
  • 2.3L L4 2260CC
  • Cutting and Welding Required During Installation
Mazda 5 2009
  • 2.3L L4 2260CC
  • Cutting and Welding Required During Installation
Mazda 6 2003
  • Rear Left
  • Rear Right
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Mazda 6 2004
  • Rear Left
  • Rear Right
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Mazda 6 2005
  • Rear Left
  • Rear Right
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Mazda Miata 1999
  • Automatic
  • 1.8L L4 1839CC
  • Cutting and Welding Required During Installation
Mazda Miata 2000
  • Automatic
  • 1.8L L4 1839CC
  • Cutting and Welding Required During Installation
Mazda Miata 2001
  • Automatic
  • 1.8L L4 1839CC
  • Cutting and Welding Required During Installation
Mazda Miata 2002
  • Automatic
  • 1.8L L4 1839CC
  • Cutting and Welding Required During Installation
Mazda Miata 2003
  • Automatic
  • 1.8L L4 1839CC
  • Cutting and Welding Required During Installation
Mazda Miata 2004
  • Automatic
  • 1.8L L4 1839CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Mazda Miata 2005
  • Automatic
  • 1.8L L4 1839CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Mazda Millenia 2001
  • 2.5L V6 2497CC
  • Cutting and Welding Required During Installation
Mazda Millenia 2002
  • 2.5L V6 2450CC/155CID
  • Cutting and Welding Required During Installation
Mazda Protege 2001
  • Rear
  • 2L L4 2000CC
  • Cutting and Welding Required During Installation
Mazda Protege 2002
  • Rear
  • 2L L4 2000CC
  • Cutting and Welding Required During Installation
Mazda Protege5 2002
  • Rear
  • 2L L4 2000CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Mazda Protege5 2003
  • Rear
  • 2L L4 2000CC
  • Cutting and Welding Required During Installation
Mazda Tribute 2001
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Mazda Tribute 2002
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Mazda Tribute 2003
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Mazda Tribute 2004
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Mercedes-Benz ML320 2003
  • Rear Right
  • Rear Left
  • 3.2L V6 3199CC
  • Cutting and Welding Required During Installation
Mercury Cougar 1999
  • Rear
  • Standard
  • 2.5L V6 2450CC/155CID
  • Cutting and Welding Required During Installation
Mercury Cougar 2000
  • Rear
  • Standard
  • 2.5L V6 2450CC/155CID
  • Cutting and Welding Required During Installation
Mercury Cougar 2001
  • Rear
  • 2.5L V6 2450CC/155CID
  • Cutting and Welding Required During Installation
Mercury Cougar 2002
  • Rear
  • Standard
  • 2.5L V6 2450CC/155CID
  • Cutting and Welding Required During Installation
Mercury Grand Marquis 2003
  • Left
  • Right
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Mercury Grand Marquis 2004
  • Left
  • Right
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Mercury Grand Marquis 2005
  • Left
  • Right
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Mercury Grand Marquis 2006
  • Left
  • Right
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Mercury Grand Marquis 2007
  • Left
  • Right
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Mercury Montego 2005
  • Center
  • Front
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Mercury Montego 2006
  • Center
  • Front
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Mercury Montego 2007
  • Center
  • Front
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Mercury Mystique 1998
  • Rear
  • Standard
  • 2.5L V6 2450CC/155CID
  • Cutting and Welding Required During Installation
Mercury Mystique 1999
  • Rear
  • Standard
  • 2.5L V6 2450CC/155CID
  • Cutting and Welding Required During Installation
Mercury Mystique 2000
  • Rear
  • Standard
  • 2.5L V6 2450CC/155CID
  • Cutting and Welding Required During Installation
Mitsubishi Eclipse 2000
  • Rear
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Mitsubishi Eclipse 2001
  • Rear
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Mitsubishi Eclipse 2002
  • Rear
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Mitsubishi Eclipse 2003
  • Rear
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Mitsubishi Eclipse 2004
  • Rear
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Mitsubishi Eclipse 2005
  • Rear
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Mitsubishi Galant 2001
  • Rear
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Mitsubishi Galant 2002
  • Rear
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Mitsubishi Galant 2003
  • Rear
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Mitsubishi Montero 1996
  • Rear
  • 3L V6 2972CC/181CID
  • 3.5L V6 3497CC/215CID
  • Cutting and Welding Required During Installation
Nissan Pathfinder 2001
  • Rear Left
  • Rear Right
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Nissan Pathfinder 2002
  • Rear Left
  • Rear Right
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Nissan Pathfinder 2003
  • Rear Left
  • Rear Right
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Nissan Pathfinder 2004
  • Rear Left
  • Rear Right
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Nissan Xterra 2000
  • Rear Right
  • Rear Left
  • 3.3L V6 3275CC
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Nissan Xterra 2001
  • Rear Left
  • Rear Right
  • 3.3L V6 3275CC
  • Cutting and Welding Required During Installation
Nissan Xterra 2002
  • Rear Right
  • Rear Left
  • Left
  • Right
  • 3.3L V6 3275CC
  • Cutting and Welding Required During Installation
Nissan Xterra 2003
  • Left
  • Right
  • Rear Left
  • Rear Right
  • 3.3L V6 3275CC
  • Cutting and Welding Required During Installation
Nissan Xterra 2004
  • Rear Left
  • Rear Right
  • Right
  • Left
  • 3.3L V6 3275CC
  • Cutting and Welding Required During Installation
Pontiac Firefly 1997
  • 1L L3 993CC/61cCID
  • 1.3L L4 1295CC/79cCID
  • Cutting and Welding Required During Installation
  • CAN
Pontiac Firefly 1998
  • 1L L3 993CC/61cCID
  • 1.3L L4 1295CC/79cCID
  • Cutting and Welding Required During Installation
  • CAN
Pontiac Firefly 1999
  • 1L L3 993CC/61cCID
  • 1.3L L4 1295CC/79cCID
  • Cutting and Welding Required During Installation
  • CAN
Saturn SC1 2000
  • Rear
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SC1 2001
  • Rear
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SC1 2002
  • Rear
  • 1.9L L4 116CID
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Saturn SC2 2000
  • Rear
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SC2 2001
  • Rear
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SC2 2002
  • Rear
  • 1.9L L4 116CID
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Saturn SL 2000
  • Rear
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SL 2001
  • Rear
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SL 2002
  • Rear
  • 1.9L L4 116CID
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Saturn SL1 2000
  • Rear
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SL1 2001
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SL1 2002
  • 1.9L L4 116CID
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Saturn SL2 2000
  • Rear
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SL2 2001
  • Rear
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SL2 2002
  • Rear
  • 1.9L L4 116CID
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Saturn SW2 2001
  • Rear
  • 1.9L L4 116CID
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Suzuki Esteem 1999
  • Rear
  • 1.8L L4 1790CC
  • Cutting and Welding Required During Installation
Suzuki Esteem 2000
  • Rear
  • 1.8L L4 1790CC
  • Cutting and Welding Required During Installation
Suzuki Esteem 2001
  • Rear
  • 1.8L L4 1790CC
  • Cutting and Welding Required During Installation
Suzuki Esteem 2002
  • Rear
  • 1.8L L4 1790CC
  • Cutting and Welding Required During Installation
Suzuki Swift 1995
  • Front
  • 1.3L L4 1298CC/79cCID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
Suzuki Swift 1996
  • Front
  • 1.3L L4 1298CC/79cCID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
Suzuki Swift 1997
  • Front
  • 1.3L L4 1298CC/79cCID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
Suzuki Swift 1998
  • Front
  • Rear
  • 1.3L L4 1298CC/79cCID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
  • California Emissions Equipped Vehicles Registered Outside Of California
Suzuki Swift 1999
  • Front
  • Rear
  • 1.3L L4 1298CC/79cCID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
  • California Emissions Equipped Vehicles Registered Outside Of California
Suzuki Swift 2000
  • Front
  • Rear
  • 1.3L L4 1298CC/79cCID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
  • California Emissions Equipped Vehicles Registered Outside Of California
Suzuki Swift 2001
  • Front
  • Rear
  • 1.3L L4 1298CC/79cCID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
  • California Emissions Equipped Vehicles Registered Outside Of California
Toyota RAV4 1998
  • Rear
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Toyota RAV4 1999
  • Rear
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Toyota RAV4 2000
  • Rear
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Toyota Tundra 2000
  • Front Left
  • Front Right
  • Right
  • Left
  • 4.7L V8 4663CC/285CID
  • Cutting and Welding Required During Installation
Toyota Tundra 2001
  • Front Left
  • Front Right
  • Left
  • Right
  • 4.7L V8 4663CC/285CID
  • Cutting and Welding Required During Installation
Toyota Tundra 2002
  • Front Left
  • Front Right
  • Left
  • Right
  • 4.7L V8 4663CC/285CID
  • Cutting and Welding Required During Installation
Toyota Tundra 2003
  • Left
  • Right
  • 4.7L V8 4663CC/285CID
  • Cutting and Welding Required During Installation
Toyota Tundra 2004
  • Left
  • Right
  • 4.7L V8 4663CC/285CID
  • Cutting and Welding Required During Installation
Volkswagen EuroVan 1996
  • 2.5L L5 2459CC/150CID
  • Cutting and Welding Required During Installation
  • CAN