100% BASÉ AU CANADA 100% CANADIEN
SANS FRAIS DE COURTAGE EN DOUANE SANS FRAIS DE DOUANE
MARCHAND AUTORISÉ MARCHAND AUTORISÉ
30 JOURS – RETOURS SANS TRACAS 30 JOURS – RETOURS

MagnaFlowUniversal Stainless Steel CARB PRE-OBDII Catalytic Converter (2.25" IN\/2.25" OUT)

DISTRIBUTEUR AUTORISÉ

334105

Numéro de Pièce du Fabricant
*Les images sont à titre illustratif seulement. Le produit réel peut varier.
SKU: MAG-334105
Sélectionnez un véhicule pour vérifier la compatibilité.

Sélectionnez un Véhicule

Cela servira à vous montrer les pièces compatibles.

Auto Parts Finder

Ce produit n'est pas compatible avec votre sélection!

Le produit affiché sur cette page n'est pas compatible avec vehicle

!
Afin d'assurer la bonne compatibilité des pièces, veuillez parcourir des produits compatibles ou changer votre sélection.


Changer la Sélection Actuelle
Livraison GRATUITE*
Garantie Standard

Commande Spéciale
1-3 Semaines
251,00 CA $
Universal Stainless Steel CARB PRE-OBDII Catalytic Converter (2.25" IN\/2.25" OUT) doit être acheté par multiple de 1
DISTRIBUTEUR AUTORISÉ

334105

Numéro de Pièce du Fabricant
Plus d’information
Fabricant MagnaFlow
Numéro de Pièce du Fabricant 334105
Prix de Détail Suggéré du Fabricant (MSRP) 143,40
Rédigez votre propre commentaire
Seuls les utilisateurs sauvegardés peuvent soumettre leur avis. Veuillez vous connecter ou créer un compte
This table represents all the 65 compatible vehicles for this part:
Marque Modèle Année
Application Notes
Position Transmission Engine Additional Information
Dodge Ram 50 1986
  • Rear
  • 2L L4 1997CC/122CID
  • 2.6L L4 2555CC/156CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Aerostar 1986
  • Rear
  • 2.3L L4 140CID
  • 3L V6 2986CC/182CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Aerostar 1987
  • Rear
  • 2.3L L4 140CID
  • 3L V6 2986CC/182CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Aerostar 1988
  • Rear
  • 3L V6 2986CC/182CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Aerostar 1989
  • Rear
  • 3L V6 2986CC/182CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Aerostar 1990
  • Rear
  • 4L V6 245CID
  • 3L V6 2986CC/182CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Aerostar 1991
  • Rear
  • 4L V6 245CID
  • 3L V6 2986CC/182CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Aerostar 1992
  • Rear
  • 4L V6 245CID
  • 3L V6 2986CC/182CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Aerostar 1993
  • Rear
  • 4L V6 245CID
  • 3L V6 2986CC/182CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Aerostar 1994
  • Rear
  • 4L V6 245CID
  • 3L V6 2986CC/182CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Aerostar 1995
  • Rear
  • 4L V6 245CID
  • 3L V6 2986CC/182CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Bronco II 1988
  • Rear
  • 2.9L V6 177CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Bronco II 1989
  • Rear
  • 2.9L V6 177CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Bronco II 1990
  • Rear
  • 2.9L V6 177CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford F-100 1980
  • Rear
  • 4.9L L6 4917CC/300CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford F-100 1981
  • Rear
  • 4.9L L6 4917CC/300CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford F-100 1982
  • Rear
  • 4.9L L6 4917CC/300CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford F-100 1983
  • Rear
  • 4.9L L6 4917CC/300CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford F-150 1994
  • Rear Left
  • Rear Right
  • 5.8L V8 351CID
  • R
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford F-150 1995
  • Rear Left
  • Rear Right
  • 5.8L V8 351CID
  • R
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford F-250 1981
  • Rear
  • 4.9L L6 4917CC/300CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford F-250 1982
  • Rear
  • 4.9L L6 4917CC/300CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford F-250 1983
  • Rear
  • 4.9L L6 4917CC/300CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford F-350 1981
  • Rear
  • 4.9L L6 4917CC/300CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford F-350 1982
  • Rear
  • 4.9L L6 4917CC/300CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford F-350 1983
  • Rear
  • 4.9L L6 4917CC/300CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Ranger 1988
  • Rear
  • 2.9L V6 177CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Ranger 1990
  • Rear
  • 4L V6 245CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Ranger 1991
  • Rear
  • 4L V6 245CID
  • 3L V6 2986CC/182CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Ranger 1992
  • Rear
  • 4L V6 245CID
  • 3L V6 2986CC/182CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Ranger 1993
  • Rear
  • 4L V6 245CID
  • 3L V6 2986CC/182CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Ranger 1994
  • Rear
  • 4L V6 245CID
  • 3L V6 2986CC/182CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Honda Passport 1994
  • Rear
  • Automatic
  • 2.6L L4 2559CC
  • 3.2L V6 3165CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Honda Passport 1995
  • Rear
  • Automatic
  • 2.6L L4 2559CC
  • 3.2L V6 3165CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Isuzu Pickup 1993
  • Rear
  • 2.3L L4 2254CC
  • 2.6L L4 2559CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Isuzu Pickup 1994
  • Rear
  • 2.3L L4 2254CC
  • 2.6L L4 2559CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Isuzu Rodeo 1993
  • Rear
  • 2.6L L4 2559CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Isuzu Rodeo 1994
  • Rear
  • Automatic
  • Standard
  • 2.6L L4 2559CC
  • 3.2L V6 3165CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Isuzu Rodeo 1995
  • Rear
  • Automatic
  • 2.6L L4 2559CC
  • 3.2L V6 3165CC
  • Certification Level : PRE-OBDII
  • Cutting and Welding Required During Installation
  • OE Spec
Mazda B2000 1987
  • Rear
  • 2L L4 1998CC/122CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda B2200 1987
  • Rear
  • 2.2L L4 2184CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda B2200 1988
  • Rear
  • 2.2L L4 2184CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda B2200 1989
  • Rear
  • 2.2L L4 2184CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda B2200 1990
  • Rear
  • 2.2L L4 2184CC
  • CARB
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda B2200 1991
  • Rear
  • 2.2L L4 2184CC
  • CARB
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda B2200 1992
  • Rear
  • 2.2L L4 2184CC
  • CARB
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda B2200 1993
  • Rear
  • 2.2L L4 2184CC
  • CARB
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda B2600 1987
  • Rear
  • 2.6L L4 2555CC/156CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda B2600 1988
  • Rear
  • 2.6L L4 2555CC/156CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda B3000 1994
  • Rear
  • 3L V6 2986CC/182CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda B4000 1994
  • Rear
  • 4L V6 245CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda MPV 1994
  • Rear
  • 3L V6 2954CC/180CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda MPV 1995
  • Rear
  • 3L V6 2954CC/180CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda Navajo 1991
  • Rear
  • 4L V6 245CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda Navajo 1992
  • Rear
  • 4L V6 245CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda Navajo 1993
  • Rear
  • 4L V6 245CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda Navajo 1994
  • Rear
  • 4L V6 245CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercury Villager 1994
  • Rear
  • 3L V6 182CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercury Villager 1995
  • Rear
  • 3L V6 182CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mitsubishi Mighty Max 1985
  • Rear
  • 2L L4 1997CC/122CID
  • 2.6L L4 2555CC/156CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mitsubishi Mighty Max 1986
  • Rear
  • 2L L4 1997CC/122CID
  • 2.6L L4 2555CC/156CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mitsubishi Montero 1995
  • Rear
  • 3L V6 2972CC/181CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan Quest 1994
  • Rear
  • 3L V6 2960CC/181CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Previa 1994
  • Rear
  • 2.4L L4 2438CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Previa 1995
  • Rear
  • 2.4L L4 2438CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation