100% BASÉ AU CANADA 100% CANADIEN
SANS FRAIS DE COURTAGE EN DOUANE SANS FRAIS DE DOUANE
MARCHAND AUTORISÉ MARCHAND AUTORISÉ
30 JOURS – RETOURS SANS TRACAS 30 JOURS – RETOURS

MagnaFlowUniversal Stainless Steel CARB PRE-OBDII Catalytic Converter (2.25" IN\/2.25" OUT)

DISTRIBUTEUR AUTORISÉ

338105

Numéro de Pièce du Fabricant
*Les images sont à titre illustratif seulement. Le produit réel peut varier.
SKU: MAG-338105
Sélectionnez un véhicule pour vérifier la compatibilité.

Sélectionnez un Véhicule

Cela servira à vous montrer les pièces compatibles.

Auto Parts Finder

Ce produit n'est pas compatible avec votre sélection!

Le produit affiché sur cette page n'est pas compatible avec vehicle

!
Afin d'assurer la bonne compatibilité des pièces, veuillez parcourir des produits compatibles ou changer votre sélection.


Changer la Sélection Actuelle
Livraison GRATUITE*
Garantie Standard

Commande Spéciale
1-3 Semaines
355,00 CA $
Universal Stainless Steel CARB PRE-OBDII Catalytic Converter (2.25" IN\/2.25" OUT) doit être acheté par multiple de 1
DISTRIBUTEUR AUTORISÉ

338105

Numéro de Pièce du Fabricant
Plus d’information
Fabricant MagnaFlow
Numéro de Pièce du Fabricant 338105
Prix de Détail Suggéré du Fabricant (MSRP) 172,26
Rédigez votre propre commentaire
Seuls les utilisateurs sauvegardés peuvent soumettre leur avis. Veuillez vous connecter ou créer un compte
This table represents all the 143 compatible vehicles for this part:
Marque Modèle Année
Application Notes
Position Submodel Body Type Engine Aspiration Additional Information
Acura Legend 1993
  • Rear
  • 3.2L V6 3206CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Acura Legend 1994
  • Rear
  • GS
  • 3.2L V6 3206CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Acura Legend 1995
  • Rear
  • GS
  • 3.2L V6 3206CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Chevrolet Spectrum 1987
  • Rear
  • 1.5L L4 1471CC/92cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Chevrolet Spectrum 1988
  • Rear
  • 1.5L L4 1471CC/92cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Chrysler Conquest 1989
  • Rear
  • 2.6L L4 2555CC/156CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Daihatsu Charade 1989
  • Rear
  • 1L L3 993CC/61cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Daihatsu Charade 1990
  • Rear
  • 1.3L L4 1295CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Colt 1983
  • Rear
  • 1.4L L4 1410CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Colt 1985
  • Rear
  • 1.5L L4 1468CC/90cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Colt 1986
  • Rear
  • 1.5L L4 1468CC/90cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Conquest 1984
  • Rear
  • 2.6L L4 2555CC/156CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Conquest 1985
  • Rear
  • 2.6L L4 2555CC/156CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Conquest 1986
  • Rear
  • 2.6L L4 2555CC/156CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Stealth 1991
  • Rear
  • 3L V6 2972CC/181CID
  • Turbocharged
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Stealth 1992
  • Rear
  • 3L V6 2972CC/181CID
  • Turbocharged
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Stealth 1993
  • Rear
  • 3L V6 2972CC/181CID
  • Turbocharged
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Stealth 1994
  • Rear
  • 3L V6 2972CC/181CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Taurus 1989
  • Rear
  • 3.8L V6 232CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Taurus 1990
  • Rear
  • 3.8L V6 232CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Geo Prizm 1993
  • Rear
  • 1.8L L4 1762CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Geo Prizm 1994
  • Rear
  • 1.6L L4 1588CC/98cCID
  • 1.8L L4 1762CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Geo Prizm 1995
  • Rear
  • 1.6L L4 1588CC/98cCID
  • 1.8L L4 1762CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Geo Spectrum 1989
  • Rear
  • 1.5L L4 1471CC/92cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Hyundai Excel 1986
  • Rear
  • 1.5L L4 1468CC/90cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Hyundai Excel 1988
  • Rear
  • 1.5L L4 1468CC/90cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Isuzu Impulse 1991
  • Rear
  • 1.6L L4 1588CC
  • Turbocharged
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Isuzu Impulse 1992
  • Rear
  • 1.6L L4 1588CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Jaguar XJ6 1993
  • Rear
  • 4L L6 3980CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Jaguar XJ6 1994
  • Rear
  • 4L L6 3980CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Jaguar XJ6 1995
  • Rear
  • 4L L6 3980CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Jaguar XJ12 1976
  • Rear Left
  • Rear Right
  • 5.3L V12 5343CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Jaguar XJ12 1977
  • Rear Right
  • 5.3L V12 5343CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Jaguar XJ12 1978
  • Rear Right
  • 5.3L V12 5343CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Jaguar XJ12 1979
  • Rear Right
  • 5.3L V12 5343CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Jaguar XJS 1993
  • Rear
  • 4L L6 3980CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Jaguar XJS 1994
  • Rear
  • 4L L6 3980CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Lexus GS300 1993
  • Rear
  • 3L L6 2997CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Lexus GS300 1994
  • Rear
  • 3L L6 2997CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Lexus GS300 1995
  • Rear
  • 3L L6 2997CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Lexus LS400 1991
  • Rear
  • 4L V8 3969CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Lexus LS400 1992
  • Rear
  • 4L V8 3969CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Lexus LS400 1993
  • Rear
  • 4L V8 3969CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Lexus LS400 1994
  • Rear
  • 4L V8 3969CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Lexus SC300 1992
  • Rear
  • 3L L6 2997CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Lexus SC300 1993
  • Rear
  • 3L L6 2997CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Lexus SC300 1994
  • Rear
  • 3L L6 2997CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Lexus SC300 1995
  • Rear
  • 3L L6 2997CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Lexus SC400 1992
  • Rear
  • 4L V8 3969CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Lexus SC400 1993
  • Rear
  • 4L V8 3969CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Lexus SC400 1994
  • Rear
  • 4L V8 3969CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Lincoln Continental 1988
  • Rear
  • 3.8L V6 232CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Lincoln Continental 1989
  • Rear
  • 3.8L V6 232CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Lincoln Continental 1990
  • Rear
  • 3.8L V6 232CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda 626 1984
  • Rear
  • 2L L4 1998CC/122CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda 626 1986
  • Rear
  • 2L L4 1998CC/122CID
  • Turbocharged
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda 626 1987
  • Rear
  • 2L L4 1998CC/122CID
  • Turbocharged
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda 626 1994
  • Rear
  • 2.5L V6 2497CC
  • 2L L4 1991CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda 626 1995
  • Rear
  • 2.5L V6 2497CC
  • 2L L4 1991CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda 929 1993
  • Rear
  • 3L V6 2954CC/180CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda 929 1994
  • Rear
  • 3L V6 2954CC/180CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda GLC 1984
  • Rear
  • Sedan
  • 1.5L L4 1490CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda GLC 1985
  • Rear
  • Hatchback
  • 1.5L L4 1490CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercury Sable 1989
  • Rear
  • 3.8L V6 232CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercury Sable 1990
  • Rear
  • 3.8L V6 232CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Merkur Scorpio 1989
  • Rear
  • 2.9L V6 177CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mitsubishi 3000GT 1991
  • Rear
  • 3L V6 2972CC/181CID
  • Turbocharged
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mitsubishi 3000GT 1992
  • Rear
  • 3L V6 2972CC/181CID
  • Turbocharged
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mitsubishi 3000GT 1993
  • Rear
  • 3L V6 2972CC/181CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mitsubishi 3000GT 1994
  • Rear
  • 3L V6 2972CC/181CID
  • Naturally Aspirated
  • Turbocharged
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mitsubishi Cordia 1984
  • Rear
  • 2L L4 1997CC/122CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mitsubishi Cordia 1986
  • Rear
  • 1.8L L4 1795CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mitsubishi Cordia 1987
  • Rear
  • 1.8L L4 1795CC
  • 2L L4 1997CC/122CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mitsubishi Diamante 1994
  • Rear
  • 3L V6 2972CC/181CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mitsubishi Galant 1988
  • Rear
  • 3L V6 2972CC/181CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mitsubishi Mirage 1985
  • Rear
  • 1.6L L4 1597CC/98cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mitsubishi Mirage 1986
  • Rear
  • 1.6L L4 1597CC/98cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mitsubishi Sigma 1989
  • Rear
  • 3L V6 2972CC/181CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mitsubishi Sigma 1990
  • Rear
  • 3L V6 2972CC/181CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mitsubishi Starion 1984
  • Rear
  • 2.6L L4 2555CC/156CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mitsubishi Starion 1986
  • Rear
  • 2.6L L4 2555CC/156CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mitsubishi Starion 1988
  • Rear
  • 2.6L L4 2555CC/156CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mitsubishi Tredia 1984
  • Rear
  • 1.8L L4 1795CC
  • 2L L4 1997CC/122CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mitsubishi Tredia 1986
  • Rear
  • 1.8L L4 1795CC
  • 2L L4 1997CC/122CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mitsubishi Tredia 1987
  • Rear
  • 1.8L L4 1795CC
  • 2L L4 1997CC/122CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mitsubishi Tredia 1988
  • Rear
  • 1.8L L4 1795CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan 240SX 1995
  • Rear
  • 2.4L L4 2389CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Nissan Altima 1995
  • Rear
  • 2.4L L4 2389CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Plymouth Colt 1984
  • Rear
  • 1.6L L4 1597CC/98cCID
  • 2L L4 1997CC/122CID
  • Turbocharged
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Plymouth Colt 1985
  • Rear
  • 1.5L L4 1468CC/90cCID
  • 2L L4 1997CC/122CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Plymouth Colt 1986
  • Rear
  • 2L L4 1997CC/122CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Plymouth Conquest 1986
  • Rear
  • 2.6L L4 2555CC/156CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru GL-10 1986
  • Rear
  • 1.8L H4 1781CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru GL-10 1987
  • Rear
  • 1.8L H4 1781CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru GL-10 1988
  • Rear
  • 1.8L H4 1781CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru GL-10 1989
  • Rear
  • 1.8L H4 1781CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru GL 1987
  • Rear
  • 1.8L H4 1781CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru GL 1989
  • Rear
  • 1.8L H4 1781CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru Justy 1988
  • Rear
  • 1.2L L3 1189CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru Justy 1993
  • Rear
  • 1.2L L3 1189CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru Justy 1994
  • Rear
  • 1.2L L3 1189CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru Legacy 1990
  • Rear
  • 2.2L H4 2212CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru Legacy 1991
  • Rear
  • 2.2L H4 2212CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru Legacy 1992
  • Rear
  • 2.2L H4 2212CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru Legacy 1993
  • Rear
  • 2.2L H4 2212CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru Legacy 1994
  • Rear
  • 2.2L H4 2212CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru Loyale 1990
  • Rear
  • 1.8L H4 1781CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru Loyale 1991
  • Rear
  • 1.8L H4 1781CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru Loyale 1992
  • Rear
  • 1.8L H4 1781CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru Loyale 1993
  • Rear
  • 1.8L H4 1781CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru Loyale 1994
  • Rear
  • 1.8L H4 1781CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru XT 1989
  • Rear
  • 2.7L H6 2672CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru XT 1990
  • Rear
  • 2.7L H6 2672CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru XT 1991
  • Rear
  • 2.7L H6 2672CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Suzuki Esteem 1995
  • Rear
  • 1.6L L4 1590CC/97cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Camry 1988
  • Rear
  • 2L L4 1998CC/122CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Camry 1989
  • Rear
  • 2L L4 1998CC/122CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Camry 1990
  • Rear
  • 2L L4 1998CC/122CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Camry 1991
  • Rear
  • 2L L4 1998CC/122CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Camry 1992
  • Rear
  • 2.2L L4 2164CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Camry 1993
  • Rear
  • 2.2L L4 2164CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Camry 1994
  • Rear
  • 2.2L L4 2164CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Camry 1995
  • Rear
  • 2.2L L4 2164CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Celica 1979
  • Rear
  • 2.6L L6 2563CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Celica 1980
  • Rear
  • 2.6L L6 2563CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Celica 1981
  • Rear
  • 2.8L L6 2759CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Celica 1990
  • Rear
  • 2L L4 1998CC/122CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Celica 1991
  • Rear
  • 2L L4 1998CC/122CID
  • 2.2L L4 2164CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Celica 1992
  • Rear
  • 2L L4 1998CC/122CID
  • 2.2L L4 2164CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Celica 1993
  • Rear
  • 2L L4 1998CC/122CID
  • 2.2L L4 2164CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Cressida 1981
  • Rear
  • 2.8L L6 2759CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Cressida 1982
  • Rear
  • 2.8L L6 2759CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota MR2 1991
  • Rear
  • 2L L4 1998CC/122CID
  • 2.2L L4 2164CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota MR2 1992
  • Rear
  • 2L L4 1998CC/122CID
  • 2.2L L4 2164CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota MR2 1993
  • Rear
  • 2L L4 1998CC/122CID
  • 2.2L L4 2164CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota MR2 1994
  • Rear
  • 2L L4 1998CC/122CID
  • 2.2L L4 2164CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota MR2 1995
  • Rear
  • 2L L4 1998CC/122CID
  • 2.2L L4 2164CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Supra 1987
  • Rear
  • 3L L6 2954CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Supra 1988
  • Rear
  • 3L L6 2954CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Supra 1989
  • Rear
  • 3L L6 2954CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Supra 1990
  • Rear
  • 3L L6 2954CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Supra 1991
  • Rear
  • 3L L6 2954CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Supra 1992
  • Rear
  • 3L L6 2954CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation