100% BASÉ AU CANADA 100% CANADIEN
SANS FRAIS DE COURTAGE EN DOUANE SANS FRAIS DE DOUANE
MARCHAND AUTORISÉ MARCHAND AUTORISÉ
30 JOURS – RETOURS SANS TRACAS 30 JOURS – RETOURS

MagnaFlowUniversal Stainless Steel CARB PRE-OBDII Catalytic Converter (2" IN\/2" OUT)

DISTRIBUTEUR AUTORISÉ

338104

Numéro de Pièce du Fabricant
*Les images sont à titre illustratif seulement. Le produit réel peut varier.
SKU: MAG-338104
Sélectionnez un véhicule pour vérifier la compatibilité.

Sélectionnez un Véhicule

Cela servira à vous montrer les pièces compatibles.

Auto Parts Finder

Ce produit n'est pas compatible avec votre sélection!

Le produit affiché sur cette page n'est pas compatible avec vehicle

!
Afin d'assurer la bonne compatibilité des pièces, veuillez parcourir des produits compatibles ou changer votre sélection.


Changer la Sélection Actuelle
Livraison GRATUITE*
Garantie Standard

Commande Spéciale
1-3 Semaines
401,00 CA $
Universal Stainless Steel CARB PRE-OBDII Catalytic Converter (2" IN\/2" OUT) doit être acheté par multiple de 1
DISTRIBUTEUR AUTORISÉ

338104

Numéro de Pièce du Fabricant
Plus d’information
Fabricant MagnaFlow
Numéro de Pièce du Fabricant 338104
Prix de Détail Suggéré du Fabricant (MSRP) 172,26
Rédigez votre propre commentaire
Seuls les utilisateurs sauvegardés peuvent soumettre leur avis. Veuillez vous connecter ou créer un compte
This table represents all the 132 compatible vehicles for this part:
Marque Modèle Année
Application Notes
Position Transmission Body Type Engine Aspiration Additional Information
BMW M3 1988
  • Rear Left
  • Rear Right
  • 2.3L L4 2302CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
BMW M3 1989
  • Rear Left
  • Rear Right
  • 2.3L L4 2302CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
BMW M3 1990
  • Rear Left
  • Rear Right
  • 2.3L L4 2302CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
BMW M3 1991
  • Rear Left
  • Rear Right
  • 2.3L L4 2302CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Chrysler Conquest 1987
  • Rear
  • 2.6L L4 2555CC/156CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Chrysler Conquest 1988
  • Rear
  • 2.6L L4 2555CC/156CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Chrysler Conquest 1989
  • Rear
  • 2.6L L4 2555CC/156CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Chrysler Sebring 1995
  • Rear
  • 2.5L V6 2497CC/152CID
  • N
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Daihatsu Charade 1990
  • Rear
  • 1L L3 993CC/61cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Daihatsu Charade 1991
  • Rear
  • 1L L3 993CC/61cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Daihatsu Charade 1992
  • Rear
  • 1L L3 993CC/61cCID
  • 1.3L L4 1295CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Avenger 1995
  • Rear
  • 2.5L V6 2497CC/152CID
  • N
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Colt 1981
  • Rear
  • 1.4L L4 1410CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Colt 1982
  • Rear
  • 1.4L L4 1410CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Colt 1983
  • Rear
  • 1.4L L4 1410CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Colt 1984
  • Rear
  • 1.4L L4 1410CC
  • 1.6L L4 1597CC/98cCID
  • 2L L4 1997CC/122CID
  • Turbocharged
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Colt 1985
  • Rear
  • 1.6L L4 1597CC/98cCID
  • 2L L4 1997CC/122CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Colt 1986
  • Rear
  • 1.5L L4 1468CC/90cCID
  • 1.6L L4 1597CC/98cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Conquest 1984
  • Rear
  • 2.6L L4 2555CC/156CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Geo Metro 1995
  • Rear
  • 1L L3 993CC/61cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Geo Prizm 1993
  • Rear
  • 1.6L L4 1588CC/98cCID
  • 1.8L L4 1762CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Geo Prizm 1994
  • Rear
  • 1.8L L4 1762CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Geo Prizm 1995
  • Rear
  • 1.6L L4 1588CC/98cCID
  • 1.8L L4 1762CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Hyundai Excel 1986
  • Rear
  • 1.5L L4 1468CC/90cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Hyundai Excel 1988
  • Rear
  • 1.5L L4 1468CC/90cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Hyundai Excel 1989
  • Rear
  • 1.5L L4 1468CC/90cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Jaguar XJ6 1990
  • Rear
  • 4L L6 3980CC
  • Certification Level : PRE-OBDII
  • USA
  • OE Spec
  • Cutting and Welding Required During Installation
  • CAN
Jaguar XJ6 1991
  • Rear
  • 4L L6 3980CC
  • Certification Level : PRE-OBDII
  • USA
  • OE Spec
  • Cutting and Welding Required During Installation
  • CAN
Jaguar XJ6 1992
  • Rear
  • 4L L6 3980CC
  • Certification Level : PRE-OBDII
  • USA
  • OE Spec
  • Cutting and Welding Required During Installation
  • CAN
Jaguar XJ6 1993
  • Rear
  • 4L L6 3980CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Jaguar XJS 1993
  • Rear
  • 4L L6 3980CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Jaguar XJS 1994
  • Rear
  • 4L L6 3980CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda 626 1983
  • Rear
  • 2L L4 1970CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda 626 1984
  • Rear
  • 2L L4 1998CC/122CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda 626 1985
  • Rear
  • 2L L4 1998CC/122CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda 626 1995
  • Rear
  • 2L L4 1991CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda GLC 1983
  • Rear
  • Hatchback
  • Wagon
  • 1.5L L4 1490CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda GLC 1984
  • Rear
  • Sedan
  • 1.5L L4 1490CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda GLC 1985
  • Rear
  • Hatchback
  • 1.5L L4 1490CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda MX-3 1994
  • Rear
  • 1.8L V6 1845CC
  • 1.6L L4 1597CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda MX-3 1995
  • Rear
  • 1.6L L4 1597CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mazda MX-6 1995
  • Rear
  • 2L L4 1991CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercedes-Benz 300E 1993
  • Rear
  • 2.8L L6 2799CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercedes-Benz 300SE 1992
  • Rear
  • 3.2L L6 3199CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercedes-Benz 300SE 1993
  • Rear
  • 3.2L L6 3199CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercedes-Benz C220 1994
  • Rear
  • 2.2L L4 2199CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercedes-Benz C280 1994
  • Rear
  • 2.8L L6 2799CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercury Mystique 1995
  • Rear
  • Automatic
  • 2.5L V6 2450CC/155CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Merkur Scorpio 1988
  • Rear
  • 2.9L V6 177CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Merkur Scorpio 1989
  • Rear
  • 2.9L V6 177CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mitsubishi Cordia 1983
  • Rear
  • 1.8L L4 1795CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mitsubishi Cordia 1984
  • Rear
  • 1.8L L4 1795CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mitsubishi Cordia 1985
  • Rear
  • 1.8L L4 1795CC
  • 2L L4 1997CC/122CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mitsubishi Cordia 1986
  • Rear
  • 1.8L L4 1795CC
  • 2L L4 1997CC/122CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mitsubishi Cordia 1987
  • Rear
  • 1.8L L4 1795CC
  • 2L L4 1997CC/122CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mitsubishi Cordia 1988
  • Rear
  • 1.8L L4 1795CC
  • 2L L4 1997CC/122CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mitsubishi Galant 1988
  • Rear
  • 3L V6 2972CC/181CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mitsubishi Mirage 1985
  • Rear
  • 1.5L L4 1468CC/90cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mitsubishi Mirage 1986
  • Rear
  • 1.5L L4 1468CC/90cCID
  • 1.6L L4 1597CC/98cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mitsubishi Precis 1987
  • Rear
  • 1.5L L4 1468CC/90cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mitsubishi Precis 1988
  • Rear
  • 1.5L L4 1468CC/90cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mitsubishi Precis 1989
  • Rear
  • 1.5L L4 1468CC/90cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mitsubishi Starion 1983
  • Rear
  • 2.6L L4 2555CC/156CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mitsubishi Starion 1985
  • Rear
  • 2.6L L4 2555CC/156CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mitsubishi Starion 1986
  • Rear
  • 2.6L L4 2555CC/156CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mitsubishi Starion 1987
  • Rear
  • 2.6L L4 2555CC/156CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mitsubishi Starion 1989
  • Rear
  • 2.6L L4 2555CC/156CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mitsubishi Tredia 1984
  • Rear
  • 1.8L L4 1795CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mitsubishi Tredia 1985
  • Rear
  • 1.8L L4 1795CC
  • 2L L4 1997CC/122CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mitsubishi Tredia 1987
  • Rear
  • 2L L4 1997CC/122CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mitsubishi Tredia 1988
  • Rear
  • 2L L4 1997CC/122CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Plymouth Champ 1981
  • Rear
  • 1.4L L4 1410CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Plymouth Champ 1982
  • Rear
  • 1.4L L4 1410CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Plymouth Colt 1983
  • Rear
  • 1.4L L4 1410CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Plymouth Colt 1984
  • Rear
  • 1.4L L4 1410CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Plymouth Colt 1985
  • Rear
  • 1.5L L4 1468CC/90cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Plymouth Colt 1986
  • Rear
  • 1.5L L4 1468CC/90cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Plymouth Conquest 1984
  • Rear
  • 2.6L L4 2555CC/156CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Plymouth Conquest 1985
  • Rear
  • 2.6L L4 2555CC/156CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru DL 1985
  • Rear
  • 1.8L H4 1781CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru DL 1986
  • Rear
  • 1.8L H4 1781CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru DL 1988
  • Rear
  • 1.8L H4 1781CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru DL 1989
  • Rear
  • 1.8L H4 1781CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru GL-10 1985
  • Rear
  • 1.8L H4 1781CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru GL-10 1986
  • Rear
  • 1.8L H4 1781CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru GL-10 1987
  • Rear
  • 1.8L H4 1781CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru GL-10 1989
  • Rear
  • 1.8L H4 1781CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru GL 1983
  • Rear
  • 1.8L H4 1781CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru GL 1984
  • Rear
  • 1.8L H4 1781CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru GL 1985
  • Rear
  • 1.8L H4 1781CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru GL 1986
  • Rear
  • 1.8L H4 1781CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru GL 1988
  • Rear
  • 1.8L H4 1781CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru Impreza 1993
  • Rear
  • 1.8L H4 1781CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru Impreza 1994
  • Rear
  • 1.8L H4 1781CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru Impreza 1995
  • Rear
  • 1.8L H4 1781CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru Justy 1989
  • Rear
  • 1.2L L3 1189CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru Justy 1990
  • Rear
  • 1.2L L3 1189CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru Justy 1991
  • Rear
  • 1.2L L3 1189CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru Legacy 1990
  • Rear
  • 2.2L H4 2212CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru Legacy 1991
  • Rear
  • 2.2L H4 2212CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru Legacy 1992
  • Rear
  • 2.2L H4 2212CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru Legacy 1993
  • Rear
  • 2.2L H4 2212CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru Legacy 1994
  • Rear
  • 2.2L H4 2212CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru Loyale 1990
  • Rear
  • 1.8L H4 1781CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru Loyale 1991
  • Rear
  • 1.8L H4 1781CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru Loyale 1992
  • Rear
  • 1.8L H4 1781CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru Loyale 1993
  • Rear
  • 1.8L H4 1781CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru Loyale 1994
  • Rear
  • 1.8L H4 1781CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru XT 1986
  • Rear
  • 1.8L H4 1781CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru XT 1987
  • Rear
  • 1.8L H4 1781CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru XT 1989
  • Rear
  • 1.8L H4 1781CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru XT 1990
  • Rear
  • 1.8L H4 1781CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru XT 1991
  • Rear
  • 1.8L H4 1781CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Suzuki Esteem 1995
  • Rear
  • 1.6L L4 1590CC/97cCID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Camry 1987
  • Rear
  • 2L L4 1998CC/122CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Camry 1991
  • Rear
  • 2L L4 1998CC/122CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Camry 1992
  • Rear
  • 2.2L L4 2164CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Camry 1993
  • Rear
  • 2.2L L4 2164CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Camry 1994
  • Rear
  • 2.2L L4 2164CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Camry 1995
  • Rear
  • 2.2L L4 2164CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Celica 1979
  • Rear
  • 2.6L L6 2563CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Celica 1980
  • Rear
  • 2.6L L6 2563CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Celica 1981
  • Rear
  • 2.8L L6 2759CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Celica 1990
  • Rear
  • 2.2L L4 2164CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Celica 1991
  • Rear
  • 2.2L L4 2164CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Celica 1992
  • Rear
  • 2.2L L4 2164CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota Celica 1993
  • Rear
  • 2.2L L4 2164CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota MR2 1991
  • Rear
  • 2L L4 1998CC/122CID
  • 2.2L L4 2164CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota MR2 1992
  • Rear
  • 2L L4 1998CC/122CID
  • 2.2L L4 2164CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota MR2 1993
  • Rear
  • 2L L4 1998CC/122CID
  • 2.2L L4 2164CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota MR2 1994
  • Rear
  • 2L L4 1998CC/122CID
  • 2.2L L4 2164CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Toyota MR2 1995
  • Rear
  • 2L L4 1998CC/122CID
  • 2.2L L4 2164CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation