100% BASÉ AU CANADA 100% CANADIEN
SANS FRAIS DE COURTAGE EN DOUANE SANS FRAIS DE DOUANE
MARCHAND AUTORISÉ MARCHAND AUTORISÉ
30 JOURS – RETOURS SANS TRACAS 30 JOURS – RETOURS

MagnaFlowUniversal Stainless Steel CARB PRE-OBDII Catalytic Converter with 1x O2 Sensor Port (2.5" IN\/2.5" OUT)

DISTRIBUTEUR AUTORISÉ

338037

Numéro de Pièce du Fabricant
*Les images sont à titre illustratif seulement. Le produit réel peut varier.
SKU: MAG-338037
Sélectionnez un véhicule pour vérifier la compatibilité.

Sélectionnez un Véhicule

Cela servira à vous montrer les pièces compatibles.

Auto Parts Finder

Ce produit n'est pas compatible avec votre sélection!

Le produit affiché sur cette page n'est pas compatible avec vehicle

!
Afin d'assurer la bonne compatibilité des pièces, veuillez parcourir des produits compatibles ou changer votre sélection.


Changer la Sélection Actuelle
Livraison GRATUITE*
Garantie Standard

Commande Spéciale
1-3 Semaines
401,00 CA $
Universal Stainless Steel CARB PRE-OBDII Catalytic Converter with 1x O2 Sensor Port (2.5" IN\/2.5" OUT) doit être acheté par multiple de 1
DISTRIBUTEUR AUTORISÉ

338037

Numéro de Pièce du Fabricant
Plus d’information
Fabricant MagnaFlow
Numéro de Pièce du Fabricant 338037
Prix de Détail Suggéré du Fabricant (MSRP) 192,17
Rédigez votre propre commentaire
Seuls les utilisateurs sauvegardés peuvent soumettre leur avis. Veuillez vous connecter ou créer un compte
This table represents all the 86 compatible vehicles for this part:
Marque Modèle Année
Application Notes
Position Engine Additional Information
Chrysler Concorde 1993
  • Rear
  • 3.3L V6 3301CC/201CID
  • 3.5L V6 3497CC/215CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Chrysler Concorde 1994
  • Rear
  • 3.3L V6 3301CC/201CID
  • 3.5L V6 3497CC/215CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Chrysler Concorde 1995
  • Rear
  • 3.3L V6 3301CC/201CID
  • 3.5L V6 3497CC/215CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Chrysler LHS 1994
  • Rear
  • 3.5L V6 3497CC/215CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Chrysler LHS 1995
  • Rear
  • 3.5L V6 3497CC/215CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Chrysler New Yorker 1994
  • Rear
  • 3.5L V6 3497CC/215CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Chrysler New Yorker 1995
  • Rear
  • 3.5L V6 3497CC/215CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Intrepid 1993
  • Rear
  • 3.3L V6 3301CC/201CID
  • 3.5L V6 3497CC/215CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Intrepid 1994
  • Rear
  • 3.3L V6 3301CC/201CID
  • 3.5L V6 3497CC/215CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Dodge Intrepid 1995
  • Rear
  • 3.3L V6 3301CC/201CID
  • 3.5L V6 3497CC/215CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Eagle Vision 1993
  • Rear
  • 3.3L V6 3301CC/201CID
  • 3.5L V6 3497CC/215CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Eagle Vision 1994
  • Rear
  • 3.3L V6 3301CC/201CID
  • 3.5L V6 3497CC/215CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Eagle Vision 1995
  • Rear
  • 3.3L V6 3301CC/201CID
  • 3.5L V6 3497CC/215CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Thunderbird 1991
  • Rear
  • 5L V8 302CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Thunderbird 1992
  • Rear
  • 5L V8 302CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Ford Thunderbird 1993
  • Rear
  • 5L V8 302CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Jaguar Vanden Plas 1982
  • Rear
  • 4.2L L6 4235CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Jaguar Vanden Plas 1983
  • Rear
  • 4.2L L6 4235CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Jaguar Vanden Plas 1984
  • Rear
  • 4.2L L6 4235CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Jaguar Vanden Plas 1985
  • Rear
  • 4.2L L6 4235CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Jaguar Vanden Plas 1986
  • Rear
  • 4.2L L6 4235CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Jaguar Vanden Plas 1987
  • Rear
  • 4.2L L6 4235CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Jaguar Vanden Plas 1988
  • Rear
  • 3.6L L6 3590CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Jaguar Vanden Plas 1989
  • Rear
  • 3.6L L6 3590CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Jaguar Vanden Plas 1990
  • Rear
  • 4L L6 3980CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Jaguar Vanden Plas 1991
  • Rear
  • 4L L6 3980CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Jaguar Vanden Plas 1992
  • Rear
  • 4L L6 3980CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Jaguar Vanden Plas 1993
  • Rear
  • 4L L6 3980CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Jaguar Vanden Plas 1994
  • Rear
  • 4L L6 3980CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Jaguar Vanden Plas 1995
  • Rear
  • 4L L6 3980CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Jaguar XJ6 1975
  • Rear
  • 4.2L L6 4235CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Jaguar XJ6 1976
  • Rear
  • 4.2L L6 4235CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Jaguar XJ6 1977
  • Rear
  • 4.2L L6 4235CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Jaguar XJ6 1978
  • Rear
  • 4.2L L6 4235CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Jaguar XJ6 1979
  • Rear
  • 4.2L L6 4235CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Jaguar XJ6 1981
  • Rear
  • 4.2L L6 4235CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Jaguar XJ6 1982
  • Rear
  • 4.2L L6 4235CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Jaguar XJ6 1983
  • Rear
  • 4.2L L6 4235CC
  • Certification Level : PRE-OBDII
  • USA
  • OE Spec
  • Cutting and Welding Required During Installation
  • CAN
Jaguar XJ6 1984
  • Rear
  • 4.2L L6 4235CC
  • Certification Level : PRE-OBDII
  • USA
  • OE Spec
  • Cutting and Welding Required During Installation
  • CAN
Jaguar XJ6 1985
  • Rear
  • 4.2L L6 4235CC
  • Certification Level : PRE-OBDII
  • USA
  • OE Spec
  • Cutting and Welding Required During Installation
  • CAN
Jaguar XJ6 1986
  • Rear
  • 4.2L L6 4235CC
  • Certification Level : PRE-OBDII
  • USA
  • OE Spec
  • Cutting and Welding Required During Installation
  • CAN
Jaguar XJ6 1987
  • Rear
  • 4.2L L6 4235CC
  • Certification Level : PRE-OBDII
  • USA
  • OE Spec
  • Cutting and Welding Required During Installation
  • CAN
Jaguar XJ6 1988
  • Rear
  • 3.6L L6 3590CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Jaguar XJ6 1989
  • Rear
  • 3.6L L6 3590CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercedes-Benz 190E 1987
  • Rear
  • 2.6L L6 2599CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercedes-Benz 190E 1988
  • Rear
  • 2.6L L6 2599CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercedes-Benz 190E 1989
  • Rear
  • 2.6L L6 2599CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercedes-Benz 260E 1987
  • Rear
  • 2.6L L6 2599CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercedes-Benz 260E 1988
  • Rear
  • 2.6L L6 2599CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercedes-Benz 260E 1989
  • Rear
  • 2.6L L6 2599CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercedes-Benz 280CE 1980
  • Rear
  • 2.8L L6 2746CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercedes-Benz 300SE 1988
  • Rear
  • 3L L6 2962CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercedes-Benz 300SE 1989
  • Rear
  • 3L L6 2962CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercedes-Benz 300SE 1990
  • Rear
  • 3L L6 2962CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercedes-Benz 300SE 1991
  • Rear
  • 3L L6 2962CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercedes-Benz 300SEL 1988
  • Rear
  • 3L L6 2962CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercedes-Benz 300SEL 1989
  • Rear
  • 3L L6 2962CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercedes-Benz 300SEL 1990
  • Rear
  • 3L L6 2962CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercedes-Benz 300SEL 1991
  • Rear
  • 3L L6 2962CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercedes-Benz 300SL 1990
  • Rear
  • 3L L6 2962CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercedes-Benz 300SL 1991
  • Rear
  • 3L L6 2962CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercedes-Benz 300SL 1992
  • Rear
  • 3L L6 2962CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercedes-Benz 300SL 1993
  • Rear
  • 3L L6 2962CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercedes-Benz 560SEC 1986
  • Rear
  • 5.6L V8 5547CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercedes-Benz 560SEC 1987
  • Rear
  • 5.6L V8 5547CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercedes-Benz 560SEC 1988
  • Rear
  • 5.6L V8 5547CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercedes-Benz 560SEC 1989
  • Rear
  • 5.6L V8 5547CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercedes-Benz 560SEC 1990
  • Rear
  • 5.6L V8 5547CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercedes-Benz 560SEC 1991
  • Rear
  • 5.6L V8 5547CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercedes-Benz 560SEL 1986
  • Rear
  • 5.6L V8 5547CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercedes-Benz 560SEL 1987
  • Rear
  • 5.6L V8 5547CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercedes-Benz 560SEL 1988
  • Rear
  • 5.6L V8 5547CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercedes-Benz 560SEL 1989
  • Rear
  • 5.6L V8 5547CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercedes-Benz 560SEL 1990
  • Rear
  • 5.6L V8 5547CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercedes-Benz 560SEL 1991
  • Rear
  • 5.6L V8 5547CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercedes-Benz 560SL 1986
  • Rear
  • 5.6L V8 5547CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercedes-Benz 560SL 1987
  • Rear
  • 5.6L V8 5547CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercedes-Benz 560SL 1988
  • Rear
  • 5.6L V8 5547CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercedes-Benz 560SL 1989
  • Rear
  • 5.6L V8 5547CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercury Cougar 1991
  • Rear
  • 5L V8 302CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercury Cougar 1992
  • Rear
  • 5L V8 302CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Mercury Cougar 1993
  • Rear
  • 5L V8 302CID
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru SVX 1992
  • Rear
  • 3.3L H6 3318CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru SVX 1993
  • Rear
  • 3.3L H6 3318CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru SVX 1994
  • Rear
  • 3.3L H6 3318CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation
Subaru SVX 1995
  • Rear
  • 3.3L H6 3318CC
  • Certification Level : PRE-OBDII
  • OE Spec
  • Cutting and Welding Required During Installation