100% CANADIAN BASED 100% CANADIAN
NO DUTIES OR CUSTOMS FEES NO CUSTOMS FEES
AUTHORIZED DEALER AUTH. DEALER
30-DAY HASSLE-FREE RETURNS 30-DAY RETURNS

MagnaFlowStainless Federal Catalytic Converter without Sensor Port (2" IN\/2" OUT)

AUTHORIZED DEALER

53104

Manufacturer Part Number
*Images are for illustrative purpose only. Actual Product may differ.
SKU: MAG-53104
Please select a vehicle to verify fitment.

Please Select a Vehicle

This will be used to show you compatible parts.

Auto Parts Finder

This product doesn't fit your selection!

The product shown on this page is not compatible with the selected vehicle

!
To ensure proper parts fitment, please browse compatible products or change your selection.


Change Current Selection
FREE Shipping*
Standard Warranty

Special Order
1-3 Weeks
CA $121.00
Stainless Federal Catalytic Converter without Sensor Port (2" IN\/2" OUT) is available to buy in increments of 1
AUTHORIZED DEALER

53104

Manufacturer Part Number
More Information
Manufacturer MagnaFlow
Manufacturer Part Number 53104
Manufacturer's Suggested Retail Price (MSRP) 103.93
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
This table represents all the 148 compatible vehicles for this part:
Make Model Year
Application Notes
Position Submodel Transmission Body Type Drive Type Engine Additional Information
Acura EL 1997
  • 1.6L L4 1590CC/97cCID
  • Cutting and Welding Required During Installation
  • CAN
Acura EL 1998
  • 1.6L L4 1590CC/97cCID
  • Cutting and Welding Required During Installation
  • CAN
Acura NSX 1991
  • Right
  • Left
  • 3L V6 2977CC
  • Cutting and Welding Required During Installation
Acura NSX 1992
  • Right
  • Left
  • 3L V6 2977CC
  • Cutting and Welding Required During Installation
Acura NSX 1993
  • Right
  • Left
  • 3L V6 2977CC
  • Cutting and Welding Required During Installation
Acura NSX 1994
  • Right
  • Left
  • 3L V6 2977CC
  • Cutting and Welding Required During Installation
Audi Fox 1975
  • 1.6L L4 1588CC/97cCID
  • Cutting and Welding Required During Installation
Audi Fox 1976
  • 1.6L L4 1588CC/97cCID
  • Cutting and Welding Required During Installation
Audi Fox 1977
  • 1.6L L4 1588CC/97cCID
  • Cutting and Welding Required During Installation
Audi Fox 1978
  • 1.6L L4 1588CC/97cCID
  • Cutting and Welding Required During Installation
Audi Fox 1979
  • 1.6L L4 1588CC/97cCID
  • Cutting and Welding Required During Installation
Dodge Dakota 1987
  • 3.9L V6 3906CC/239CID
  • Pre-Converter
  • Cutting and Welding Required During Installation
Dodge Dakota 1988
  • 3.9L V6 3906CC/239CID
  • Pre-Converter
  • Cutting and Welding Required During Installation
Dodge Dakota 1989
  • 3.9L V6 3906CC/239CID
  • Pre-Converter
  • Cutting and Welding Required During Installation
Ford Focus 2011
  • Rear
  • 2L L4 1999CC/122CID
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Partial Zero Emissions Vehicles (PZEV)
  • Cutting and Welding Required During Installation
Ford Mustang 1987
  • Front
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Ford Mustang 1988
  • Front
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Ford Mustang 1989
  • Front
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Ford Mustang 1990
  • Front
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Ford Mustang 1991
  • Front
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Ford Mustang 1992
  • Front
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Ford Mustang 1993
  • Front
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Ford Taurus 1988
  • Front
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Ford Taurus 1989
  • Front Right
  • Front Left
  • SHO
  • 3.8L V6 232CID
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Ford Taurus 1990
  • Front Right
  • Front Left
  • SHO
  • 3.8L V6 232CID
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Ford Taurus 1991
  • SHO
  • 3.8L V6 232CID
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Ford Taurus 1992
  • SHO
  • 3.8L V6 232CID
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Ford Taurus 1993
  • Right
  • Left
  • SHO
  • 3.2L V6 195CID
  • 3.8L V6 232CID
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Ford Taurus 1994
  • Right
  • Left
  • 3.2L V6 195CID
  • 3.8L V6 232CID
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Ford Taurus 1995
  • Right
  • Left
  • SE
  • GL
  • SHO
  • LX
  • 3.2L V6 195CID
  • 3.8L V6 232CID
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Ford Thunderbird 1984
  • Front Right
  • Front Left
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Ford Thunderbird 1985
  • Front Right
  • Front Left
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Ford Thunderbird 1986
  • Front Right
  • Front Left
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Ford Thunderbird 1987
  • Front Right
  • Front Left
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Ford Thunderbird 1988
  • Front Right
  • Front Left
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Geo Prizm 1993
  • Rear
  • 1.8L L4 1762CC
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Geo Prizm 1994
  • Rear
  • 1.8L L4 1762CC
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Geo Prizm 1995
  • Rear
  • 1.8L L4 1762CC
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Honda Passport 1994
  • Front
  • Automatic
  • 3.2L V6 3165CC
  • Cutting and Welding Required During Installation
Honda Passport 1995
  • Front
  • Automatic
  • 3.2L V6 3165CC
  • Cutting and Welding Required During Installation
Isuzu Rodeo 1994
  • Front
  • Automatic
  • 3.2L V6 3165CC
  • Cutting and Welding Required During Installation
Isuzu Rodeo 1995
  • Front
  • Automatic
  • 3.2L V6 3165CC
  • Cutting and Welding Required During Installation
Lincoln Continental 1986
  • Front Left
  • Front Right
  • 5L V8 302CID
  • Dual Exhaust
  • Cutting and Welding Required During Installation
Lincoln Continental 1987
  • Front Left
  • Front Right
  • 5L V8 302CID
  • Dual Exhaust
  • Cutting and Welding Required During Installation
Lincoln Continental 1988
  • Right
  • Left
  • Front Left
  • Front Right
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
  • Split Date To: To 11/1989
Lincoln Continental 1989
  • Right
  • Left
  • Front Left
  • Front Right
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
  • Split Date To: To 11/1989
Lincoln Continental 1990
  • Left
  • Right
  • Front Left
  • Front Right
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
  • Split Date From: From 11/1989
  • Split Date To: To 11/1989
Lincoln Continental 1991
  • Left
  • Right
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Lincoln Continental 1992
  • Left
  • Right
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Lincoln Continental 1993
  • Left
  • Right
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Lincoln Continental 1994
  • Left
  • Right
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Lincoln Mark VIII 1993
  • Front Left
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Lincoln Mark VIII 1994
  • Front Left
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Lincoln Mark VIII 1995
  • Front Left
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Mazda GLC 1981
  • 1.5L L4 1490CC
  • Cutting and Welding Required During Installation
Mazda GLC 1982
  • 1.5L L4 1490CC
  • Cutting and Welding Required During Installation
Mazda GLC 1983
  • Rear
  • Hatchback
  • Sedan
  • Wagon
  • 1.5L L4 1490CC
  • Cutting and Welding Required During Installation
Mazda GLC 1984
  • Rear
  • 1.5L L4 1490CC
  • Cutting and Welding Required During Installation
Mazda GLC 1985
  • Rear
  • 1.5L L4 1490CC
  • Cutting and Welding Required During Installation
Mercury Cougar 1984
  • Front
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Mercury Cougar 1985
  • Front
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Mercury Cougar 1986
  • Front
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Mercury Cougar 1987
  • Front
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Mercury Cougar 1988
  • Front
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Mercury Sable 1988
  • Front
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Mercury Sable 1989
  • Front Right
  • Front Left
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Mercury Sable 1990
  • Front Right
  • Front Left
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Mercury Sable 1991
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Mercury Sable 1992
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Mercury Sable 1993
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Mercury Sable 1994
  • 3.8L V6 232CID
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Mercury Sable 1995
  • 3.8L V6 232CID
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Merkur Scorpio 1988
  • Front
  • Rear
  • 2.9L V6 177CID
  • Cutting and Welding Required During Installation
Merkur Scorpio 1989
  • Front
  • Rear
  • 2.9L V6 177CID
  • Cutting and Welding Required During Installation
MG MGB 1975
  • 1.8L L4 1798CC/110CID
  • Cutting and Welding Required During Installation
MG MGB 1976
  • 1.8L L4 1798CC/110CID
  • Cutting and Welding Required During Installation
MG MGB 1977
  • 1.8L L4 1798CC/110CID
  • Cutting and Welding Required During Installation
MG MGB 1978
  • 1.8L L4 1798CC/110CID
  • Cutting and Welding Required During Installation
MG MGB 1979
  • 1.8L L4 1798CC/110CID
  • Cutting and Welding Required During Installation
MG MGB 1980
  • 1.8L L4 1798CC/110CID
  • Cutting and Welding Required During Installation
Nissan Sentra 2003
  • Rear
  • 1.8L L4 1769CC
  • Cutting and Welding Required During Installation
Nissan Sentra 2004
  • Rear
  • 1.8L L4 1769CC
  • Cutting and Welding Required During Installation
Nissan Sentra 2005
  • Rear
  • 1.8L L4 1769CC
  • Cutting and Welding Required During Installation
Nissan Sentra 2006
  • Rear
  • 1.8L L4 1769CC
  • Cutting and Welding Required During Installation
Pontiac Grand LeMans 1983
  • 3.8L V6 231CID
  • Cutting and Welding Required During Installation
  • CAN
Porsche 924 1977
  • 2L L4 1983CC
  • Cutting and Welding Required During Installation
Porsche 924 1978
  • 2L L4 1983CC
  • Cutting and Welding Required During Installation
Porsche 924 1979
  • 2L L4 1983CC
  • Cutting and Welding Required During Installation
Saab 9000 1989
  • 2L L4 1985CC
  • Cutting and Welding Required During Installation
  • CAN
Toyota Celica 1994
  • Rear
  • ST
  • 1.8L L4 1762CC
  • Cutting and Welding Required During Installation
Toyota Celica 1995
  • Rear
  • ST
  • 1.8L L4 1762CC
  • Cutting and Welding Required During Installation
Toyota Corolla 1993
  • Rear
  • 1.6L L4 1587CC
  • 1.8L L4 1762CC
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Toyota Corolla 1994
  • Rear
  • 1.6L L4 1587CC
  • 1.8L L4 1762CC
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Toyota Corolla 1995
  • Rear
  • 1.6L L4 1587CC
  • 1.8L L4 1762CC
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Toyota Matrix 2003
  • Rear
  • XRS
  • XR
  • Base
  • FWD
  • 1.8L L4 1795CC
  • 1.8L L4 1794CC
  • Cutting and Welding Required During Installation
Toyota Matrix 2004
  • Rear
  • XR
  • Base
  • FWD
  • 1.8L L4 1794CC
  • Cutting and Welding Required During Installation
Toyota Matrix 2005
  • Rear
  • XR
  • Base
  • FWD
  • 1.8L L4 1794CC
  • Cutting and Welding Required During Installation
Toyota Matrix 2006
  • Rear
  • Base
  • XR
  • FWD
  • 1.8L L4 1794CC
  • Cutting and Welding Required During Installation
Toyota Matrix 2007
  • Rear
  • 1.8L L4 1794CC
  • Cutting and Welding Required During Installation
Toyota Matrix 2008
  • Rear
  • 1.8L L4 1794CC
  • Cutting and Welding Required During Installation
Volkswagen Beetle 1975
  • 1.6L H4 1584CC/97cCID
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Volkswagen Beetle 1976
  • 1.6L H4 1584CC/97cCID
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Volkswagen Beetle 1977
  • 1.6L H4 1584CC/97cCID
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Volkswagen Beetle 1978
  • 1.6L H4 1584CC/97cCID
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Volkswagen Beetle 1979
  • 1.6L H4 1584CC/97cCID
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Volkswagen Dasher 1975
  • 1.5L L4 1471CC
  • Cutting and Welding Required During Installation
Volkswagen Dasher 1976
  • 1.6L L4 1588CC/97cCID
  • Cutting and Welding Required During Installation
Volkswagen Dasher 1977
  • 1.6L L4 1588CC/97cCID
  • Cutting and Welding Required During Installation
Volkswagen Dasher 1978
  • 1.6L L4 1588CC/97cCID
  • Cutting and Welding Required During Installation
Volkswagen Dasher 1979
  • 1.6L L4 1588CC/97cCID
  • Cutting and Welding Required During Installation
Volkswagen Dasher 1980
  • 1.6L L4 1588CC/97cCID
  • Cutting and Welding Required During Installation
Volkswagen Dasher 1981
  • 1.6L L4 1588CC/97cCID
  • Cutting and Welding Required During Installation
Volkswagen Jetta 1980
  • 1.6L L4 1588CC/97cCID
  • Cutting and Welding Required During Installation
Volkswagen Jetta 1981
  • 1.7L L4 1715CC
  • Cutting and Welding Required During Installation
Volkswagen Jetta 1982
  • 1.7L L4 1715CC
  • Cutting and Welding Required During Installation
  • USA
Volkswagen Jetta 1983
  • 1.7L L4 1715CC
  • Cutting and Welding Required During Installation
Volkswagen Jetta 1984
  • 1.7L L4 1715CC
  • 1.8L L4 1781CC
  • Cutting and Welding Required During Installation
Volkswagen Quantum 1982
  • 1.7L L4 1715CC
  • Cutting and Welding Required During Installation
Volkswagen Quantum 1983
  • 2.2L L5 2144CC
  • 1.7L L4 1715CC
  • Cutting and Welding Required During Installation
Volkswagen Quantum 1984
  • 2.2L L5 2144CC
  • Cutting and Welding Required During Installation
Volkswagen Quantum 1985
  • 1.8L L4 1781CC
  • 2.2L L5 2226CC
  • Cutting and Welding Required During Installation
Volkswagen Rabbit 1975
  • 1.5L L4 1471CC
  • Cutting and Welding Required During Installation
Volkswagen Rabbit 1976
  • 1.6L L4 1588CC/97cCID
  • Cutting and Welding Required During Installation
Volkswagen Rabbit 1977
  • 1.6L L4 1588CC/97cCID
  • Cutting and Welding Required During Installation
Volkswagen Rabbit 1978
  • 1.5L L4 1457CC
  • GAS
  • Cutting and Welding Required During Installation
Volkswagen Rabbit 1979
  • 1.5L L4 1457CC
  • GAS
  • Cutting and Welding Required During Installation
Volkswagen Rabbit 1980
  • 1.6L L4 1588CC/97cCID
  • 1.5L L4 1457CC
  • Cutting and Welding Required During Installation
Volkswagen Rabbit 1981
  • 1.7L L4 1715CC
  • Cutting and Welding Required During Installation
Volkswagen Rabbit 1982
  • 1.7L L4 1715CC
  • FI
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Volkswagen Rabbit 1983
  • 1.7L L4 1715CC
  • 1.8L L4 1781CC
  • FI
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Volkswagen Rabbit 1984
  • 1.7L L4 1715CC
  • 1.8L L4 1781CC
  • FI
  • Aftermarket Style
  • Cutting and Welding Required During Installation
Volkswagen Rabbit Pickup 1980
  • 1.6L L4 1588CC/97cCID
  • 1.5L L4 1457CC
  • Cutting and Welding Required During Installation
Volkswagen Rabbit Pickup 1981
  • 1.7L L4 1715CC
  • Cutting and Welding Required During Installation
Volkswagen Rabbit Pickup 1982
  • 1.7L L4 1715CC
  • Cutting and Welding Required During Installation
Volkswagen Rabbit Pickup 1983
  • 1.7L L4 1715CC
  • Cutting and Welding Required During Installation
Volkswagen Scirocco 1975
  • 1.5L L4 1471CC
  • Cutting and Welding Required During Installation
Volkswagen Scirocco 1976
  • 1.6L L4 1588CC/97cCID
  • Cutting and Welding Required During Installation
Volkswagen Scirocco 1977
  • 1.6L L4 1588CC/97cCID
  • Cutting and Welding Required During Installation
Volkswagen Scirocco 1978
  • 1.5L L4 1457CC
  • Cutting and Welding Required During Installation
Volkswagen Scirocco 1979
  • 1.6L L4 1588CC/97cCID
  • Cutting and Welding Required During Installation
Volkswagen Scirocco 1980
  • 1.6L L4 1588CC/97cCID
  • Cutting and Welding Required During Installation
Volkswagen Scirocco 1981
  • 1.7L L4 1715CC
  • Cutting and Welding Required During Installation
Volkswagen Scirocco 1982
  • 1.7L L4 1715CC
  • Cutting and Welding Required During Installation
Volkswagen Scirocco 1983
  • 1.7L L4 1715CC
  • Cutting and Welding Required During Installation
Volvo 760 1983
  • 2.8L V6 2849CC
  • Cutting and Welding Required During Installation
Volvo 760 1984
  • 2.8L V6 2849CC
  • Cutting and Welding Required During Installation
Volvo 760 1985
  • 2.8L V6 2849CC
  • Cutting and Welding Required During Installation
Volvo 760 1986
  • 2.8L V6 2849CC
  • Cutting and Welding Required During Installation