Canada Post's strike - Transit times not affectedOther carriers used; except for P.O. Boxes
100% CANADIAN BASED 100% CANADIAN
NO DUTIES OR CUSTOMS FEES NO CUSTOMS FEES
AUTHORIZED DEALER AUTH. DEALER
30-DAY HASSLE-FREE RETURNS 30-DAY RETURNS

MagnaFlowStainless Federal Catalytic Converter without Sensor Port (2" IN\/2" OUT)

AUTHORIZED DEALER

94014

Manufacturer Part Number
*Images are for illustrative purpose only. Actual Product may differ.
SKU: MAG-94014
Please select a vehicle to verify fitment.

Please Select a Vehicle

This will be used to show you compatible parts.

Auto Parts Finder

This product doesn't fit your selection!

The product shown on this page is not compatible with the selected vehicle

!
To ensure proper parts fitment, please browse compatible products or change your selection.


Change Current Selection
FREE Shipping*
Standard Warranty

Special Order
1-3 Weeks
CA $173.00
Stainless Federal Catalytic Converter without Sensor Port (2" IN\/2" OUT) is available to buy in increments of 1
AUTHORIZED DEALER

94014

Manufacturer Part Number
More Information
Manufacturer MagnaFlow
Manufacturer Part Number 94014
Manufacturer's Suggested Retail Price (MSRP) 117.07
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
This table represents all the 428 compatible vehicles for this part:
Make Model Year
Application Notes
Position Submodel Transmission Drive Type Engine Aspiration Additional Information
Alfa Romeo Spider 1990
  • 2L L4 1961CC/120CID
  • Cutting and Welding Required During Installation
Alfa Romeo Spider 1991
  • 2L L4 1961CC/120CID
  • Cutting and Welding Required During Installation
Alfa Romeo Spider 1992
  • 2L L4 1961CC/120CID
  • Cutting and Welding Required During Installation
American Motors AMX 1980
  • Rear
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
American Motors Concord 1980
  • Rear
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
American Motors Concord 1981
  • Rear
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
American Motors Concord 1982
  • Rear
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
American Motors Concord 1983
  • Rear
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
American Motors Eagle 1981
  • Rear
  • DL SX4
  • SX4
  • 4.2L L6 258CID
  • 2.5L L4 151CID
  • Cutting and Welding Required During Installation
  • Air Tube
American Motors Eagle 1982
  • Rear
  • DL SX4
  • SX4
  • 4.2L L6 258CID
  • 2.5L L4 151CID
  • Cutting and Welding Required During Installation
  • Air Tube
American Motors Eagle 1983
  • Rear
  • DL SX4
  • SX4
  • 4.2L L6 258CID
  • 2.5L L4 150CID
  • 2.5L L4 151CID
  • Cutting and Welding Required During Installation
  • Air Tube
American Motors Eagle 1984
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
American Motors Eagle 1985
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
American Motors Eagle 1986
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
American Motors Eagle 1987
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
American Motors Eagle 1988
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
American Motors Spirit 1980
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
American Motors Spirit 1981
  • Rear
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
American Motors Spirit 1982
  • Rear
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
American Motors Spirit 1983
  • Rear
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
BMW 320i 1977
  • 2L L4 1990CC/121CID
  • Cutting and Welding Required During Installation
BMW 320i 1978
  • 2L L4 1990CC/121CID
  • Cutting and Welding Required During Installation
BMW 320i 1979
  • 2L L4 1990CC/121CID
  • Cutting and Welding Required During Installation
Buick Century 1982
  • 3L V6 181CID
  • Cutting and Welding Required During Installation
Buick Century 1983
  • 3L V6 181CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
  • CAN
Buick Century 1984
  • 3.8L V6 3800CC/231CID
  • 3L V6 181CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
  • CAN
Buick Century 1985
  • 3.8L V6 3800CC/231CID
  • 3L V6 181CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
  • CAN
Buick Skyhawk 1983
  • 1.8L L4 112CID
  • 2L L4 122CID
  • Air Tube
  • Cutting and Welding Required During Installation
Buick Skyhawk 1984
  • 1.8L L4 112CID
  • 2L L4 122CID
  • Naturally Aspirated
  • without Air Tube
  • Cutting and Welding Required During Installation
Buick Skylark 1982
  • 2.8L V6 173CID
  • X
  • Cutting and Welding Required During Installation
Buick Skylark 1983
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Buick Skylark 1984
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Buick Skylark 1985
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet Camaro 1982
  • 2.8L V6 173CID
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
  • Air Tube
Chevrolet Camaro 1983
  • 2.5L L4 2474CC/151CID
  • without Air Tube
  • Cutting and Welding Required During Installation
Chevrolet Cavalier 1983
  • 2L L4 122CID
  • Cutting and Welding Required During Installation
  • CAN
Chevrolet Cavalier 1984
  • 2L L4 122CID
  • without Air Tube
  • Cutting and Welding Required During Installation
Chevrolet Celebrity 1982
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet Celebrity 1983
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet Celebrity 1984
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet Celebrity 1985
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet Celebrity 1986
  • 2.8L V6 173CID
  • X
  • CARB
  • Cutting and Welding Required During Installation
Chevrolet Chevette 1981
  • 1.6L L4 98cCID
  • Cutting and Welding Required During Installation
Chevrolet Chevette 1982
  • 1.6L L4 98cCID
  • Cutting and Welding Required During Installation
Chevrolet Chevette 1983
  • 1.6L L4 98cCID
  • Cutting and Welding Required During Installation
Chevrolet Chevette 1984
  • 1.6L L4 98cCID
  • Cutting and Welding Required During Installation
Chevrolet Chevette 1985
  • 1.6L L4 98cCID
  • Cutting and Welding Required During Installation
Chevrolet Chevette 1986
  • 1.6L L4 98cCID
  • Cutting and Welding Required During Installation
Chevrolet Chevette 1987
  • 1.6L L4 98cCID
  • Cutting and Welding Required During Installation
Chevrolet Citation 1982
  • 2.8L V6 173CID
  • X
  • Cutting and Welding Required During Installation
Chevrolet Citation 1983
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet Citation II 1984
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet Citation II 1985
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet Nova 1985
  • 1.6L L4 1588CC/98cCID
  • Cutting and Welding Required During Installation
Chevrolet Nova 1986
  • 1.6L L4 1588CC/98cCID
  • Cutting and Welding Required During Installation
Chevrolet Nova 1987
  • 1.6L L4 1588CC/98cCID
  • Cutting and Welding Required During Installation
Chevrolet Nova 1988
  • 1.6L L4 1588CC/98cCID
  • 4
  • Cutting and Welding Required During Installation
Chrysler Cordoba 1980
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Chrysler Cordoba 1981
  • 3.7L L6 3687CC/225CID
  • Air Tube
  • Cutting and Welding Required During Installation
Chrysler Cordoba 1982
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Chrysler Cordoba 1983
  • 3.7L L6 3687CC/225CID
  • Air Tube
  • Cutting and Welding Required During Installation
Chrysler Daytona 1987
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
  • CAN
Chrysler Daytona 1988
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
  • CAN
Chrysler Daytona 1989
  • Rear
  • 2.5L L4 2507CC/153CID
  • Naturally Aspirated
  • Air Tube
  • CAN
  • Cutting and Welding Required During Installation
Chrysler Daytona 1990
  • Rear
  • 2.5L L4 2507CC/153CID
  • Naturally Aspirated
  • Air Tube
  • CAN
  • Cutting and Welding Required During Installation
Chrysler Daytona 1991
  • Rear
  • 2.5L L4 2507CC/153CID
  • Naturally Aspirated
  • Air Tube
  • CAN
  • Cutting and Welding Required During Installation
Chrysler Daytona 1992
  • Rear
  • 2.5L L4 2507CC/153CID
  • Naturally Aspirated
  • Air Tube
  • CAN
  • Cutting and Welding Required During Installation
Chrysler Daytona 1993
  • Rear
  • 2.5L L4 2507CC/153CID
  • Air Tube
  • CAN
  • Cutting and Welding Required During Installation
Chrysler E Class 1983
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Chrysler E Class 1984
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Chrysler Fifth Avenue 1983
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Chrysler Laser 1984
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Chrysler Laser 1985
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Chrysler Laser 1986
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Chrysler LeBaron 1980
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Chrysler LeBaron 1982
  • Front
  • Rear
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Chrysler LeBaron 1983
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Chrysler LeBaron 1984
  • 2.2L L4 135CID
  • C
  • Cutting and Welding Required During Installation
  • D
Chrysler LeBaron 1985
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Chrysler LeBaron 1986
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Chrysler LeBaron 1987
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Chrysler LeBaron 1988
  • Base
  • GTS
  • Premium
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Chrysler LeBaron 1989
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Chrysler LeBaron 1990
  • 2.5L L4 2507CC/153CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Chrysler LeBaron 1991
  • 2.5L L4 2507CC/153CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Chrysler LeBaron 1992
  • 2.5L L4 2507CC/153CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Chrysler LeBaron 1993
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Chrysler New Yorker 1982
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Chrysler New Yorker 1983
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Chrysler New Yorker 1984
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Chrysler New Yorker 1986
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Chrysler New Yorker 1987
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Chrysler Town & Country 1986
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Chrysler Town & Country 1987
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Chrysler Town & Country 1988
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Dodge 400 1982
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge 400 1983
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge 600 1983
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge 600 1984
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge 600 1985
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge 600 1986
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge 600 1987
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge 600 1988
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge Aries 1981
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge Aries 1982
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge Aries 1983
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge Aries 1984
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge Aries 1985
  • 2.2L L4 135CID
  • C
  • Cutting and Welding Required During Installation
Dodge Aries 1986
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge Aries 1987
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge Aries 1988
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge Aries 1989
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge Caravan 1984
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge Caravan 1985
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge Caravan 1986
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge Caravan 1987
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge Charger 1983
  • Rear
  • 1.6L L4 1595CC/97cCID
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
  • Air Tube
Dodge Charger 1984
  • 1.6L L4 1595CC/97cCID
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge Charger 1985
  • Front
  • 2.2L L4 135CID
  • 1.6L L4 1595CC/97cCID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
  • Air Tube
Dodge Charger 1986
  • Front
  • 2.2L L4 135CID
  • 1.6L L4 1595CC/97cCID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
  • Air Tube
Dodge Dakota 1987
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge Dakota 1988
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge Daytona 1984
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge Daytona 1985
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge Daytona 1986
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge Daytona 1987
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Dodge Daytona 1988
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Dodge Daytona 1989
  • 2.5L L4 2507CC/153CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge Daytona 1990
  • 2.5L L4 2507CC/153CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge Daytona 1991
  • 2.5L L4 2507CC/153CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge Daytona 1992
  • 2.5L L4 2507CC/153CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge Daytona 1993
  • 2.5L L4 2507CC/153CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge Diplomat 1982
  • Rear
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Dodge Diplomat 1983
  • 3.7L L6 3687CC/225CID
  • Air Tube
  • Cutting and Welding Required During Installation
Dodge Lancer 1985
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge Lancer 1986
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge Lancer 1987
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge Lancer 1988
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge Lancer 1989
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge Mini Ram 1984
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge Mini Ram 1985
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge Mini Ram 1986
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge Mini Ram 1987
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge Mirada 1982
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Dodge Mirada 1983
  • 3.7L L6 3687CC/225CID
  • Air Tube
  • Cutting and Welding Required During Installation
Dodge Omni 1980
  • 1.7L L4 105CID
  • Cutting and Welding Required During Installation
Dodge Omni 1981
  • Front
  • Rear
  • 1.7L L4 105CID
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge Omni 1982
  • Front
  • Rear
  • 1.7L L4 105CID
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge Omni 1983
  • Rear
  • Front
  • 1.6L L4 1595CC/97cCID
  • 1.7L L4 105CID
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge Omni 1984
  • 1.6L L4 1595CC/97cCID
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge Omni 1985
  • 1.6L L4 1595CC/97cCID
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge Omni 1986
  • 1.6L L4 1595CC/97cCID
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge Omni 1987
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge Omni 1988
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge Omni 1989
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge Omni 1990
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge Rampage 1982
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge Rampage 1983
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge Rampage 1984
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge Shadow 1987
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge Shadow 1988
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge Shadow 1989
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge Shadow 1990
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge Shadow 1991
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge Shadow 1992
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge Shadow 1993
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge Shadow 1994
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge Spirit 1989
  • 2.5L L4 2507CC/153CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge Spirit 1990
  • 2.5L L4 2507CC/153CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge Spirit 1991
  • 2.5L L4 2507CC/153CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge Spirit 1992
  • 2.5L L4 2507CC/153CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Dodge Spirit 1993
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Dodge Spirit 1994
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Dodge Spirit 1995
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Ford Escort 1981
  • 1.6L L4 1598CC/98cCID
  • Cutting and Welding Required During Installation
Ford Escort 1982
  • 1.6L L4 1598CC/98cCID
  • Cutting and Welding Required During Installation
Ford EXP 1982
  • 1.6L L4 1598CC/98cCID
  • Cutting and Welding Required During Installation
Ford Festiva 1988
  • 1.3L L4 1295CC
  • Cutting and Welding Required During Installation
Ford Festiva 1989
  • Standard
  • 1.3L L4 1295CC
  • Cutting and Welding Required During Installation
Ford LTD 1980
  • Left
  • Right
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford LTD 1981
  • Left
  • Right
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.2L V8 255CID
  • Cutting and Welding Required During Installation
Ford LTD 1982
  • Left
  • Right
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.2L V8 255CID
  • Cutting and Welding Required During Installation
Ford LTD 1983
  • Left
  • Right
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford LTD 1984
  • Left
  • Right
  • 5L V8 302CID
  • 5.8L V8 351CID
  • F
  • FI
  • Cutting and Welding Required During Installation
Ford LTD 1985
  • Left
  • Right
  • 5L V8 302CID
  • 5.8L V8 351CID
  • F
  • FI
  • Cutting and Welding Required During Installation
Ford LTD 1986
  • Left
  • Right
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford LTD Crown Victoria 1987
  • Left
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford LTD Crown Victoria 1988
  • Left
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford LTD Crown Victoria 1989
  • Left
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford LTD Crown Victoria 1990
  • Left
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford LTD Crown Victoria 1991
  • Left
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford Mustang 1981
  • Rear
  • 4.2L V8 255CID
  • Air Tube
  • USA
  • Cutting and Welding Required During Installation
Ford Mustang 1983
  • 2.3L L4 140CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Ford Pinto 1980
  • Rear
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Ford Ranger 1983
  • 2L L4 1989CC/122CID
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
  • Excluding High Altitude Package
Ford Ranger 1984
  • 2L L4 1989CC/122CID
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
  • Excluding High Altitude Package
Ford Ranger 1985
  • 2L L4 1989CC/122CID
  • Cutting and Welding Required During Installation
Ford Ranger 1986
  • 2L L4 1989CC/122CID
  • Cutting and Welding Required During Installation
Ford Ranger 1987
  • 2L L4 1989CC/122CID
  • Cutting and Welding Required During Installation
Ford Ranger 1988
  • 2L L4 1989CC/122CID
  • Cutting and Welding Required During Installation
Ford Ranger 1989
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Ford Ranger 1990
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Ford Ranger 1991
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Ford Ranger 1992
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Ford Ranger 1993
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Ford Ranger 1994
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Ford Thunderbird 1983
  • Right
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Ford Thunderbird 1984
  • Right
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Ford Thunderbird 1985
  • Right
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Hyundai Pony 1983
  • 1.4L L4 1393CC/85cCID
  • Cutting and Welding Required During Installation
  • CAN
Hyundai Pony 1984
  • 1.4L L4 1393CC/85cCID
  • Cutting and Welding Required During Installation
  • CAN
Hyundai Pony 1985
  • 1.4L L4 1393CC/85cCID
  • Cutting and Welding Required During Installation
  • CAN
Hyundai Pony 1986
  • 1.4L L4 1393CC/85cCID
  • Cutting and Welding Required During Installation
  • CAN
Hyundai Pony 1987
  • 1.4L L4 1393CC/85cCID
  • Cutting and Welding Required During Installation
  • CAN
Hyundai Stellar 1985
  • 1.6L L4 1596CC
  • Cutting and Welding Required During Installation
  • CAN
Hyundai Stellar 1986
  • 1.6L L4 1596CC
  • Cutting and Welding Required During Installation
  • CAN
Hyundai Stellar 1987
  • 2L L4 1997CC
  • Cutting and Welding Required During Installation
  • CAN
Jeep Cherokee 1981
  • 4.2L L6 258CID
  • Air Tube
  • Cutting and Welding Required During Installation
Jeep Cherokee 1982
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
Jeep Cherokee 1983
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
Jeep Cherokee 1984
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep Cherokee 1985
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep CJ5 1982
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
Jeep CJ5 1983
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
Jeep CJ7 1982
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
Jeep CJ7 1983
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
Jeep CJ7 1984
  • 4.2L L6 258CID
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep CJ7 1985
  • 4.2L L6 258CID
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep CJ7 1986
  • 4.2L L6 258CID
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep Grand Wagoneer 1984
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
Jeep Grand Wagoneer 1985
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
Jeep Grand Wagoneer 1986
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
Jeep J10 1982
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
Jeep J10 1983
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
Jeep J10 1984
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
Jeep J10 1985
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
Jeep J10 1986
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
Jeep J10 1987
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
Jeep Scrambler 1982
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
Jeep Scrambler 1983
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
Jeep Scrambler 1984
  • 4.2L L6 258CID
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep Scrambler 1985
  • 4.2L L6 258CID
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep Wagoneer 1981
  • 4.2L L6 258CID
  • Air Tube
  • Cutting and Welding Required During Installation
Jeep Wagoneer 1982
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
Jeep Wagoneer 1983
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
Jeep Wagoneer 1984
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep Wagoneer 1985
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep Wrangler 1987
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
Jeep Wrangler 1988
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
Jeep Wrangler 1989
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
Jeep Wrangler 1990
  • 4.2L L6 258CID
  • Cutting and Welding Required During Installation
Laforza Laforza 1989
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Laforza Laforza 1990
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Lincoln Mark VI 1980
  • Left
  • Right
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Lincoln Mark VI 1981
  • Left
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Lincoln Mark VI 1982
  • Left
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Lincoln Mark VI 1983
  • Left
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Lincoln Mark VII 1984
  • Right
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Lincoln Mark VII 1985
  • Right
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Lincoln Town Car 1981
  • Left
  • Right
  • 5L V8 302CID
  • Air Tube
  • Cutting and Welding Required During Installation
Lincoln Town Car 1982
  • Left
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Lincoln Town Car 1983
  • Left
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Lincoln Town Car 1984
  • Left
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Lincoln Town Car 1985
  • Left
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Mazda RX-7 1981
  • Rear
  • 1.1L R2 1146CC
  • Cutting and Welding Required During Installation
Mazda RX-7 1982
  • Rear
  • 1.1L R2 1146CC
  • Cutting and Welding Required During Installation
Mazda RX-7 1983
  • Rear
  • 1.1L R2 1146CC
  • Cutting and Welding Required During Installation
Mazda RX-7 1984
  • Rear
  • N/A
  • 1.1L R2 1146CC
  • 1.3L R2 1308CC
  • Cutting and Welding Required During Installation
Mazda RX-7 1985
  • Rear
  • Front Forward
  • 1.1L R2 1146CC
  • 1.3L R2 1308CC
  • Cutting and Welding Required During Installation
Mazda RX-7 1986
  • Rear
  • 1.3L R2 1308CC
  • Cutting and Welding Required During Installation
Mazda RX-7 1987
  • Rear
  • 1.3L R2 1308CC
  • Cutting and Welding Required During Installation
Mazda RX-7 1988
  • Rear
  • 1.3L R2 1308CC
  • Cutting and Welding Required During Installation
Mazda RX-7 1989
  • Rear
  • 1.3L R2 1308CC
  • Cutting and Welding Required During Installation
Mazda RX-7 1990
  • Rear
  • 1.3L R2 1308CC
  • Cutting and Welding Required During Installation
Mazda RX-7 1991
  • Rear
  • 1.3L R2 1308CC
  • Cutting and Welding Required During Installation
Mercury Bobcat 1980
  • Rear
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Mercury Capri 1983
  • Rear
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Mercury Cougar 1983
  • Right
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Mercury Cougar 1984
  • Right
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Mercury Cougar 1985
  • Right
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Mercury Grand Marquis 1980
  • Left
  • Right
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Mercury Grand Marquis 1981
  • Left
  • Right
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.2L V8 255CID
  • Cutting and Welding Required During Installation
Mercury Grand Marquis 1982
  • Left
  • 5L V8 302CID
  • 4.2L V8 255CID
  • Cutting and Welding Required During Installation
Mercury Grand Marquis 1983
  • Left
  • Right
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
  • CAN
Mercury Grand Marquis 1984
  • Left
  • Right
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
  • CAN
Mercury Grand Marquis 1985
  • Left
  • Right
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
  • CAN
Mercury Grand Marquis 1986
  • Left
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Mercury Grand Marquis 1989
  • Right
  • Left
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Replaces Both Front and Rear OE Converters
  • Air Tube
  • Cutting and Welding Required During Installation
  • CAN
Mercury LN7 1982
  • 1.6L L4 1598CC/98cCID
  • Cutting and Welding Required During Installation
Mercury Lynx 1981
  • 1.6L L4 1598CC/98cCID
  • Cutting and Welding Required During Installation
Mercury Lynx 1982
  • 1.6L L4 1598CC/98cCID
  • Cutting and Welding Required During Installation
Mercury Marquis 1980
  • Left
  • Right
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Mercury Marquis 1981
  • Left
  • Right
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.2L V8 255CID
  • Cutting and Welding Required During Installation
Mercury Marquis 1982
  • Left
  • 5L V8 302CID
  • 4.2L V8 255CID
  • Cutting and Welding Required During Installation
Mitsubishi Galant 1987
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Nissan Micra 1984
  • 1.2L L4 1229CC/75cCID
  • Cutting and Welding Required During Installation
  • CAN
Nissan Micra 1985
  • 1.2L L4 1229CC/75cCID
  • Cutting and Welding Required During Installation
  • CAN
Nissan Micra 1986
  • 1.2L L4 1229CC/75cCID
  • Cutting and Welding Required During Installation
  • CAN
Nissan Micra 1987
  • 1.2L L4 1229CC/75cCID
  • Cutting and Welding Required During Installation
  • CAN
Nissan Multi 1986
  • 2L L4 1974CC/122CID
  • Cutting and Welding Required During Installation
  • CAN
Nissan Multi 1987
  • 2L L4 1974CC/122CID
  • Cutting and Welding Required During Installation
  • CAN
Nissan Multi 1988
  • 2L L4 1974CC/122CID
  • Cutting and Welding Required During Installation
  • CAN
Nissan Sentra 1987
  • 1.6L L4 1597CC/97cCID
  • FI
  • Cutting and Welding Required During Installation
Nissan Sentra 1988
  • 1.6L L4 1597CC/97cCID
  • Cutting and Welding Required During Installation
Nissan Sentra 1989
  • 1.6L L4 1597CC/97cCID
  • Cutting and Welding Required During Installation
Nissan Sentra 1990
  • 4WD
  • FWD
  • 1.6L L4 1597CC/97cCID
  • Cutting and Welding Required During Installation
  • CAN
Oldsmobile Cutlass Ciera 1982
  • 3L V6 181CID
  • 2.5L L4 2474CC/151CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
  • without Air Tube
  • Air Tube
  • CAN
Oldsmobile Cutlass Ciera 1983
  • 3L V6 181CID
  • 2.5L L4 2474CC/151CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
  • without Air Tube
  • Air Tube
  • CAN
Oldsmobile Cutlass Ciera 1984
  • 3.8L V6 3800CC/231CID
  • 3L V6 181CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
  • CAN
Oldsmobile Cutlass Ciera 1985
  • 3.8L V6 3800CC/231CID
  • 3L V6 181CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
  • CAN
Oldsmobile Cutlass Ciera 1986
  • 2.8L V6 173CID
  • X
  • CARB
  • Cutting and Welding Required During Installation
Oldsmobile Firenza 1983
  • 1.8L L4 112CID
  • 2L L4 122CID
  • without Air Tube
  • Cutting and Welding Required During Installation
  • Air Tube
  • CAN
Oldsmobile Firenza 1984
  • 1.8L L4 112CID
  • 2L L4 122CID
  • without Air Tube
  • Cutting and Welding Required During Installation
Oldsmobile Firenza 1986
  • 1.8L L4 112CID
  • 2L L4 122CID
  • without Air Tube
  • Cutting and Welding Required During Installation
Oldsmobile Omega 1981
  • 2.5L L4 2474CC/151CID
  • 2.8L V6 173CID
  • Air Tube
  • Cutting and Welding Required During Installation
Oldsmobile Omega 1982
  • 2.8L V6 173CID
  • X
  • Cutting and Welding Required During Installation
Oldsmobile Omega 1983
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Oldsmobile Omega 1984
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Peugeot 504 1980
  • 2.3L L4 2304CC
  • Cutting and Welding Required During Installation
Peugeot 504 1981
  • 2.3L L4 2304CC
  • Cutting and Welding Required During Installation
Peugeot 504 1982
  • 2.3L L4 2304CC
  • Cutting and Welding Required During Installation
Peugeot 504 1983
  • 2.3L L4 2304CC
  • Cutting and Welding Required During Installation
Peugeot 505 1986
  • 2L L4 1971CC
  • without Air Tube
  • Cutting and Welding Required During Installation
Plymouth Acclaim 1989
  • 2.5L L4 2507CC/153CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Plymouth Acclaim 1990
  • 2.5L L4 2507CC/153CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Plymouth Acclaim 1991
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Plymouth Acclaim 1992
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Plymouth Acclaim 1993
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Plymouth Acclaim 1994
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Plymouth Acclaim 1995
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Plymouth Arrow 1980
  • 1.6L L4 1597CC/98cCID
  • Cutting and Welding Required During Installation
Plymouth Caravelle 1981
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
  • CAN
Plymouth Caravelle 1982
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
  • CAN
Plymouth Caravelle 1983
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
  • CAN
Plymouth Caravelle 1984
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
  • CAN
Plymouth Caravelle 1985
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Plymouth Caravelle 1986
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Plymouth Caravelle 1987
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Plymouth Caravelle 1988
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Plymouth Gran Fury 1982
  • Rear
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Plymouth Gran Fury 1983
  • Rear
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Plymouth Horizon 1980
  • 1.7L L4 105CID
  • Cutting and Welding Required During Installation
Plymouth Horizon 1981
  • Front
  • Rear
  • 1.7L L4 105CID
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Plymouth Horizon 1982
  • Front
  • Rear
  • 1.7L L4 105CID
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Plymouth Horizon 1983
  • Rear
  • Front
  • 1.6L L4 1595CC/97cCID
  • 1.7L L4 105CID
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Plymouth Horizon 1984
  • 1.6L L4 1595CC/97cCID
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Plymouth Horizon 1985
  • 1.6L L4 1595CC/97cCID
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Plymouth Horizon 1986
  • 1.6L L4 1595CC/97cCID
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Plymouth Horizon 1987
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Plymouth Horizon 1988
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Plymouth Horizon 1989
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Plymouth Horizon 1990
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Plymouth Reliant 1981
  • Rear
  • 2.2L L4 135CID
  • with Single Converter
  • Cutting and Welding Required During Installation
  • 2 Converters
Plymouth Reliant 1982
  • Rear
  • 2.2L L4 135CID
  • with Single Converter
  • Cutting and Welding Required During Installation
  • 2 Converters
Plymouth Reliant 1983
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Plymouth Reliant 1984
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Plymouth Reliant 1985
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Plymouth Reliant 1986
  • Automatic
  • Standard
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Plymouth Reliant 1987
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Plymouth Reliant 1988
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Plymouth Reliant 1989
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Plymouth Scamp 1983
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Plymouth Sundance 1987
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Plymouth Sundance 1988
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Plymouth Sundance 1989
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Plymouth Sundance 1990
  • Automatic
  • Standard
  • 2.2L L4 135CID
  • 2.5L L4 2507CC/153CID
  • Naturally Aspirated
  • Air Tube
  • Cutting and Welding Required During Installation
  • without Air Tube
Plymouth Sundance 1991
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Plymouth Sundance 1992
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Plymouth Sundance 1993
  • 2.2L L4 135CID
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
  • Air Tube
Plymouth Sundance 1994
  • 2.5L L4 2507CC/153CID
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Plymouth Turismo 1984
  • Front
  • 1.6L L4 1595CC/97cCID
  • Air Tube
  • Cutting and Welding Required During Installation
Plymouth Turismo 1985
  • Front
  • 1.6L L4 1595CC/97cCID
  • Air Tube
  • Cutting and Welding Required During Installation
  • CAN
Plymouth Voyager 1984
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Plymouth Voyager 1985
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Plymouth Voyager 1986
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Plymouth Voyager 1987
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Pontiac 6000 1982
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Pontiac 6000 1983
  • 2.8L V6 173CID
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
  • without Air Tube
  • Air Tube
Pontiac 6000 1984
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Pontiac 6000 1985
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Pontiac 6000 1986
  • 2.8L V6 173CID
  • CARB
  • Cutting and Welding Required During Installation
Pontiac Acadian 1981
  • 1.6L L4 1606CC/98cCID
  • Cutting and Welding Required During Installation
  • CAN
Pontiac Acadian 1982
  • 1.6L L4 1606CC/98cCID
  • Cutting and Welding Required During Installation
  • CAN
Pontiac Acadian 1983
  • 1.6L L4 98cCID
  • Cutting and Welding Required During Installation
  • CAN
Pontiac Acadian 1984
  • 1.6L L4 98cCID
  • Cutting and Welding Required During Installation
  • CAN
Pontiac Acadian 1985
  • 1.6L L4 98cCID
  • Cutting and Welding Required During Installation
  • CAN
Pontiac Acadian 1986
  • 1.6L L4 98cCID
  • Cutting and Welding Required During Installation
  • CAN
Pontiac Acadian 1987
  • 1.6L L4 98cCID
  • Cutting and Welding Required During Installation
  • CAN
Pontiac Firebird 1982
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Pontiac Firefly 1988
  • 1L L3 993CC/61cCID
  • Cutting and Welding Required During Installation
  • CAN
Pontiac Firefly 1989
  • 1L L3 993CC/61cCID
  • Cutting and Welding Required During Installation
  • CAN
Pontiac Optima 1989
  • 2L L4 122CID
  • Cutting and Welding Required During Installation
  • CAN
Pontiac Phoenix 1982
  • 2.8L V6 173CID
  • X
  • Cutting and Welding Required During Installation
Pontiac Phoenix 1983
  • 2.5L L4 2474CC/151CID
  • 2.8L V6 173CID
  • without Air Tube
  • Cutting and Welding Required During Installation
  • Air Tube
Pontiac Phoenix 1984
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Pontiac T1000 1981
  • 1.6L L4 98cCID
  • Cutting and Welding Required During Installation
Pontiac T1000 1982
  • 1.6L L4 98cCID
  • Cutting and Welding Required During Installation
Pontiac T1000 1983
  • 1.6L L4 98cCID
  • Cutting and Welding Required During Installation
Pontiac T1000 1984
  • 1.6L L4 98cCID
  • Cutting and Welding Required During Installation
Pontiac T1000 1985
  • 1.6L L4 98cCID
  • Cutting and Welding Required During Installation
Pontiac T1000 1986
  • 1.6L L4 98cCID
  • Cutting and Welding Required During Installation
Pontiac T1000 1987
  • 1.6L L4 98cCID
  • Cutting and Welding Required During Installation
Toyota Corolla 1983
  • 1.6L L4 1587CC
  • Cutting and Welding Required During Installation
Toyota Corolla 1984
  • Sport DLX
  • Sport SR5
  • 1.6L L4 1587CC
  • Cutting and Welding Required During Installation
Toyota Corolla 1985
  • Sport DLX
  • Sport SR5
  • LE Limited
  • LE
  • DLX
  • 1.6L L4 1587CC
  • Cutting and Welding Required During Installation
Toyota Corolla 1986
  • Sport DLX
  • Sport SR5
  • DLX
  • LE
  • LE Limited
  • 1.6L L4 1587CC
  • Cutting and Welding Required During Installation
Toyota Corolla 1987
  • Sport DLX
  • Sport SR5
  • DLX
  • FX
  • LE
  • 1.6L L4 1587CC
  • Cutting and Welding Required During Installation
Toyota Corolla 1988
  • FX16 GTS
  • GTS
  • 1.6L L4 1587CC
  • Air Tube
  • Cutting and Welding Required During Installation
Toyota Tercel 1983
  • 1.5L L4 1452CC
  • Cutting and Welding Required During Installation
Toyota Tercel 1984
  • 1.5L L4 1452CC
  • Cutting and Welding Required During Installation
Toyota Tercel 1985
  • 1.5L L4 1452CC
  • Cutting and Welding Required During Installation
Toyota Tercel 1986
  • 1.5L L4 1452CC
  • Cutting and Welding Required During Installation
Toyota Tercel 1987
  • 1.5L L4 1456CC
  • 1.5L L4 1452CC
  • Cutting and Welding Required During Installation
Toyota Tercel 1988
  • 1.5L L4 1456CC
  • 1.5L L4 1452CC
  • Cutting and Welding Required During Installation
Toyota Tercel 1989
  • 1.5L L4 1456CC
  • Cutting and Welding Required During Installation
Toyota Tercel 1990
  • 1.5L L4 1456CC
  • Cutting and Welding Required During Installation
Volkswagen Rabbit 1982
  • 1.7L L4 1715CC
  • CARB
  • Cutting and Welding Required During Installation
Volkswagen Rabbit 1983
  • 1.7L L4 1715CC
  • CARB
  • Cutting and Welding Required During Installation
Volkswagen Rabbit 1984
  • 1.7L L4 1715CC
  • CARB
  • Cutting and Welding Required During Installation
Yugo GV 1986
  • 1.1L L4 1116CC
  • Cutting and Welding Required During Installation
Yugo GV 1987
  • 1.1L L4 1116CC
  • Cutting and Welding Required During Installation
Yugo GV 1988
  • 1.1L L4 1116CC
  • Cutting and Welding Required During Installation
Yugo GV 1989
  • 1.1L L4 1116CC
  • Cutting and Welding Required During Installation
Yugo GVL 1988
  • 1.1L L4 1116CC
  • Cutting and Welding Required During Installation
Yugo GVL 1989
  • 1.1L L4 1116CC
  • Cutting and Welding Required During Installation
Yugo GVS 1988
  • 1.1L L4 1116CC
  • Cutting and Welding Required During Installation
Yugo GVX 1988
  • 1.3L L4 1301CC
  • Cutting and Welding Required During Installation
Yugo GVX 1989
  • 1.3L L4 1301CC
  • Cutting and Welding Required During Installation