Canada Post's strikeCanada Post resumed its operationsNo unusual delay in transit expected
100% CANADIAN BASED 100% CANADIAN
NO DUTIES OR CUSTOMS FEES NO CUSTOMS FEES
AUTHORIZED DEALER AUTH. DEALER
30-DAY HASSLE-FREE RETURNS 30-DAY RETURNS

MagnaFlowStainless Federal Heavy Metal Catalytic Converter without Sensor Port (2.25" IN\/2.25" OUT)

AUTHORIZED DEALER

99005HM

Manufacturer Part Number
*Images are for illustrative purpose only. Actual Product may differ.
SKU: MAG-99005HM
Please select a vehicle to verify fitment.

Please Select a Vehicle

This will be used to show you compatible parts.

Auto Parts Finder

This product doesn't fit your selection!

The product shown on this page is not compatible with the selected vehicle

!
To ensure proper parts fitment, please browse compatible products or change your selection.


Change Current Selection
FREE Shipping*
Standard Warranty

Special Order
1-3 Weeks
CA $304.00
Stainless Federal Heavy Metal Catalytic Converter without Sensor Port (2.25" IN\/2.25" OUT) is available to buy in increments of 1
AUTHORIZED DEALER

99005HM

Manufacturer Part Number
More Information
Manufacturer MagnaFlow
Manufacturer Part Number 99005HM
Manufacturer's Suggested Retail Price (MSRP) 168.96
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
This table represents all the 428 compatible vehicles for this part:
Make Model Year
Application Notes
Position Submodel Transmission Body Type Drive Type Engine Aspiration Additional Information
Audi S4 2000
  • Rear Left
  • Front Left
  • Rear Right
  • Front Right
  • 2.7L V6 2671CC
  • Cutting and Welding Required During Installation
Audi S4 2001
  • Rear Left
  • Front Left
  • Front Right
  • Rear Right
  • 2.7L V6 2671CC
  • Cutting and Welding Required During Installation
Audi S4 2002
  • Rear Left
  • Front Left
  • Front Right
  • Rear Right
  • 2.7L V6 2671CC
  • Cutting and Welding Required During Installation
BMW Z3 1996
  • 1.9L L4 1895CC
  • Cutting and Welding Required During Installation
BMW Z3 1997
  • 1.9L L4 1895CC
  • Cutting and Welding Required During Installation
BMW Z3 1998
  • 1.9L L4 1895CC
  • Cutting and Welding Required During Installation
Cadillac Catera 1997
  • Left
  • Right
  • 3L V6 2962CC/181CID
  • Cutting and Welding Required During Installation
Cadillac Catera 1998
  • Left
  • Right
  • 3L V6 2962CC/181CID
  • Cutting and Welding Required During Installation
Cadillac Catera 1999
  • Left
  • Right
  • 3L V6 2962CC/181CID
  • Cutting and Welding Required During Installation
Cadillac Catera 2000
  • Left
  • Right
  • 3L V6 2962CC/181CID
  • Cutting and Welding Required During Installation
Cadillac Catera 2001
  • Left
  • Right
  • 3L V6 2962CC/181CID
  • Cutting and Welding Required During Installation
Chevrolet Camaro 1996
  • Right
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet Camaro 1997
  • Right
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet Camaro 1998
  • Right
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet Camaro 1999
  • Right
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet Caprice 1996
  • Left
  • Right
  • 5.7L V8 350CID
  • 4.3L V8 265CID
  • Cutting and Welding Required During Installation
Chevrolet Impala 1996
  • Left
  • Right
  • SS
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet Tracker 1998
  • 1.6L L4 1588CC/98cCID
  • Cutting and Welding Required During Installation
Chevrolet Tracker 1999
  • Front
  • 1.6L L4 1588CC/98cCID
  • 2L L4 122CID
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Chevrolet Tracker 2000
  • Front
  • 1.6L L4 1588CC/98cCID
  • 2L L4 122CID
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Chevrolet Tracker 2001
  • Front
  • 2L L4 122CID
  • 1.6L L4 1588CC/98cCID
  • Cutting and Welding Required During Installation
  • CAN
Chevrolet Tracker 2002
  • Front
  • 2L L4 122CID
  • Cutting and Welding Required During Installation
Chevrolet Tracker 2003
  • Front
  • 2L L4 122CID
  • Cutting and Welding Required During Installation
Chevrolet Venture 1997
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Chevrolet Venture 1998
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Chevrolet Venture 1999
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Chevrolet Venture 2000
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Chrysler Cirrus 1996
  • 2.4L L4 2429CC/148CID
  • 2.5L V6 2497CC/152CID
  • Cutting and Welding Required During Installation
Chrysler Cirrus 1997
  • 2.4L L4 2429CC/148CID
  • 2.5L V6 2497CC/152CID
  • Cutting and Welding Required During Installation
Chrysler Cirrus 1998
  • 2.5L V6 2497CC/152CID
  • Cutting and Welding Required During Installation
Chrysler Cirrus 1999
  • 2.5L V6 2497CC/152CID
  • Cutting and Welding Required During Installation
Chrysler Cirrus 2000
  • 2.5L V6 2497CC/152CID
  • Cutting and Welding Required During Installation
Chrysler Grand Voyager 2000
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Chrysler Sebring 1995
  • Rear
  • 2.5L V6 2497CC/152CID
  • Cutting and Welding Required During Installation
Chrysler Sebring 1996
  • Rear
  • 2.5L V6 2497CC/152CID
  • Cutting and Welding Required During Installation
Chrysler Sebring 1997
  • JX
  • JXi
  • Convertible
  • 2.4L L4 2429CC/148CID
  • 2.5L V6 2497CC/152CID
  • Cutting and Welding Required During Installation
Chrysler Sebring 1998
  • JX
  • JXi
  • Convertible
  • 2.4L L4 2429CC/148CID
  • 2.5L V6 2497CC/152CID
  • Cutting and Welding Required During Installation
Chrysler Sebring 1999
  • Convertible
  • 2.5L V6 2497CC/152CID
  • Cutting and Welding Required During Installation
Chrysler Sebring 2000
  • Convertible
  • 2.5L V6 2497CC/152CID
  • Cutting and Welding Required During Installation
Chrysler Sebring 2001
  • Rear
  • Coupe
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Chrysler Sebring 2002
  • Rear
  • Coupe
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Chrysler Sebring 2003
  • Rear
  • Coupe
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Chrysler Sebring 2004
  • Rear
  • Coupe
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Chrysler Sebring 2005
  • Rear
  • Coupe
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Chrysler Town & Country 1996
  • 3.3L V6 3301CC/201CID
  • 3.8L V6 3778CC/231CID
  • Cutting and Welding Required During Installation
Chrysler Town & Country 1997
  • 3.3L V6 3301CC/201CID
  • 3.8L V6 3778CC/231CID
  • Cutting and Welding Required During Installation
Chrysler Town & Country 1998
  • 3.3L V6 3301CC/201CID
  • 3.8L V6 3778CC/231CID
  • Cutting and Welding Required During Installation
Chrysler Town & Country 1999
  • 3.3L V6 3301CC/201CID
  • 3.8L V6 3778CC/231CID
  • Cutting and Welding Required During Installation
Chrysler Town & Country 2000
  • 3.3L V6 3301CC/201CID
  • 3.8L V6 3778CC/231CID
  • Cutting and Welding Required During Installation
Chrysler Voyager 2000
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge Caravan 1996
  • 3.3L V6 3301CC/201CID
  • 3.8L V6 3778CC/231CID
  • 3L V6 2972CC/181CID
  • 2.4L L4 2429CC/148CID
  • Cutting and Welding Required During Installation
Dodge Caravan 1997
  • 3.3L V6 3301CC/201CID
  • 3.8L V6 3778CC/231CID
  • 3L V6 2972CC/181CID
  • 2.4L L4 2429CC/148CID
  • Cutting and Welding Required During Installation
Dodge Caravan 1998
  • 3.3L V6 3301CC/201CID
  • 3.8L V6 3778CC/231CID
  • 3L V6 2972CC/181CID
  • 2.4L L4 2429CC/148CID
  • Cutting and Welding Required During Installation
Dodge Caravan 1999
  • 3.3L V6 3301CC/201CID
  • 3.8L V6 3778CC/231CID
  • 3L V6 2972CC/181CID
  • 2.4L L4 2429CC/148CID
  • Cutting and Welding Required During Installation
Dodge Caravan 2000
  • 3.3L V6 3301CC/201CID
  • 3L V6 2972CC/181CID
  • 2.4L L4 2429CC/148CID
  • Cutting and Welding Required During Installation
Dodge Dakota 1996
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Dodge Dakota 1997
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Dodge Dakota 1998
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Dodge Grand Caravan 1996
  • 3.3L V6 3301CC/201CID
  • 3.8L V6 3778CC/231CID
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge Grand Caravan 1997
  • 3.3L V6 3301CC/201CID
  • 3.8L V6 3778CC/231CID
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge Grand Caravan 1998
  • 3.3L V6 3301CC/201CID
  • 3.8L V6 3778CC/231CID
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge Grand Caravan 1999
  • 3.3L V6 3301CC/201CID
  • 3.8L V6 3778CC/231CID
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge Grand Caravan 2000
  • 3.3L V6 3301CC/201CID
  • 3.8L V6 3778CC/231CID
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge Stratus 1996
  • 2.4L L4 2429CC/148CID
  • 2L L4 1996CC/122CID
  • 2.5L V6 2497CC/152CID
  • Cutting and Welding Required During Installation
Dodge Stratus 1997
  • 2.4L L4 2429CC/148CID
  • 2L L4 1996CC/122CID
  • 2.5L V6 2497CC/152CID
  • Cutting and Welding Required During Installation
Dodge Stratus 1998
  • 2.5L V6 2497CC/152CID
  • Cutting and Welding Required During Installation
Dodge Stratus 1999
  • 2.5L V6 2497CC/152CID
  • Cutting and Welding Required During Installation
Dodge Stratus 2000
  • 2.5L V6 2497CC/152CID
  • Cutting and Welding Required During Installation
Dodge Stratus 2001
  • Rear
  • Coupe
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge Stratus 2002
  • Rear
  • Coupe
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge Stratus 2003
  • Rear
  • Coupe
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge Stratus 2004
  • Rear
  • Coupe
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge Stratus 2005
  • Rear
  • Coupe
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Ford Aerostar 1996
  • Front
  • Rear
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford Aerostar 1997
  • Front
  • Rear
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford Crown Victoria 1995
  • Rear Left
  • Rear Right
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Ford Crown Victoria 1996
  • Rear Left
  • Rear Right
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Ford Crown Victoria 1997
  • Rear Left
  • Rear Right
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Ford Crown Victoria 1998
  • Rear Left
  • Rear Right
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Ford Crown Victoria 1999
  • Rear Left
  • Rear Right
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Ford Crown Victoria 2000
  • Rear Left
  • Rear Right
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Ford Crown Victoria 2001
  • Rear Left
  • Rear Right
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Ford Crown Victoria 2002
  • Rear Left
  • Rear Right
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline 1997
  • Left
  • Right
  • 4.2L V6 256CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline 1998
  • Left
  • Right
  • 4.2L V6 256CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline 1999
  • Left
  • Right
  • 4.2L V6 256CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline Club Wagon 1997
  • Left
  • Right
  • 4.2L V6 256CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline Club Wagon 1998
  • Left
  • Right
  • 4.2L V6 256CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline Club Wagon 1999
  • Left
  • Right
  • 4.2L V6 256CID
  • Cutting and Welding Required During Installation
Ford E-250 Econoline 1997
  • Left
  • Right
  • 4.2L V6 256CID
  • Cutting and Welding Required During Installation
Ford E-250 Econoline 1998
  • Left
  • Right
  • 4.2L V6 256CID
  • Cutting and Welding Required During Installation
Ford E-250 Econoline 1999
  • Left
  • Right
  • 4.2L V6 256CID
  • Cutting and Welding Required During Installation
Ford Escape 2005
  • Rear
  • Limited
  • XLS
  • XLT
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Ford Escort 1997
  • 2L L4 1989CC/121CID
  • Cutting and Welding Required During Installation
Ford Expedition 1997
  • Rear Right
  • Rear Left
  • 5.4L V8 330CID
  • Cutting and Welding Required During Installation
Ford Expedition 1998
  • Rear Right
  • Rear Left
  • 5.4L V8 330CID
  • Cutting and Welding Required During Installation
Ford Explorer 1996
  • Front Left
  • Front Right
  • Rear
  • Left
  • Right
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Ford Explorer 1997
  • Front Left
  • Front Right
  • Rear
  • Left
  • Right
  • 5L V8 302CID
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
  • E
Ford Explorer 1998
  • Front Left
  • Front Right
  • Rear
  • Left
  • Right
  • 5L V8 302CID
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
  • E
Ford Explorer 1999
  • Left
  • Right
  • 4L V6 245CID
  • E
  • Cutting and Welding Required During Installation
Ford Explorer 2000
  • Left
  • Right
  • 4L V6 245CID
  • E
  • Cutting and Welding Required During Installation
Ford Explorer 2001
  • Left
  • Right
  • 4L V6 245CID
  • E
  • Cutting and Welding Required During Installation
Ford Explorer 2002
  • Rear
  • XLT
  • XLS
  • Postal
  • Limited
  • Eddie Bauer
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford Explorer 2003
  • Rear
  • Eddie Bauer
  • Limited
  • Postal
  • XLS
  • XLT
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford Explorer Sport Trac 2003
  • Rear
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford Explorer Sport Trac 2004
  • Rear
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford Explorer Sport Trac 2005
  • Rear
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford F-250 Super Duty 1999
  • Rear Left
  • Rear Right
  • 5.4L V8 330CID
  • Cutting and Welding Required During Installation
  • To 15,000lbs. Gross Vehicle Weight
Ford F-150 1997
  • Rear Left
  • Rear Right
  • 5.4L V8 330CID
  • Cutting and Welding Required During Installation
Ford F-150 1998
  • Rear Left
  • Rear Right
  • 5.4L V8 330CID
  • Cutting and Welding Required During Installation
Ford F-250 1999
  • Rear Left
  • Rear Right
  • 5.4L V8 330CID
  • Cutting and Welding Required During Installation
Ford Fusion 2006
  • Rear
  • 3L V6 2968CC/181CID
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Ford Fusion 2007
  • Rear
  • FWD
  • 3L V6 2968CC/181CID
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Ford Fusion 2008
  • Rear
  • FWD
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Ford Fusion 2009
  • Rear
  • FWD
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Ford Mustang 2004
  • Rear Left
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Ford Mustang 2005
  • Rear Left
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford Mustang 2006
  • Rear Left
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford Mustang 2007
  • Rear Left
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford Mustang 2008
  • Rear Left
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford Mustang 2009
  • Rear Left
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford Mustang 2010
  • Rear Left
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford Probe 1996
  • Rear
  • 2.5L V6 2497CC
  • 2L L4 1989CC/122CID
  • Cutting and Welding Required During Installation
Ford Probe 1997
  • Rear
  • 2.5L V6 2497CC
  • 2L L4 1989CC/122CID
  • Cutting and Welding Required During Installation
Ford Ranger 1995
  • Left
  • 4L V6 245CID
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Ford Ranger 1996
  • Left
  • 2.3L L4 140CID
  • 4L V6 245CID
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Ford Ranger 1997
  • Left
  • 2.3L L4 140CID
  • 4L V6 245CID
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Ford Ranger 1998
  • Rear
  • Front Left
  • Front Right
  • 2.5L L4 153CID
  • 4L V6 245CID
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Ford Ranger 1999
  • Rear
  • Front Left
  • Front Right
  • 2.5L L4 153CID
  • 4L V6 245CID
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Ford Ranger 2000
  • Rear
  • Front Left
  • Front Right
  • 2.5L L4 153CID
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford Ranger 2001
  • Rear
  • Front Left
  • Front Right
  • Rear Forward
  • Rear Rearward
  • 2.5L L4 153CID
  • 4L V6 245CID
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Ford Ranger 2002
  • Rear Forward
  • Front Left
  • Front Right
  • Rear Rearward
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford Ranger 2003
  • Front Left
  • Front Right
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford Ranger 2004
  • Rear Forward
  • Front Left
  • Front Right
  • Rear Rearward
  • 4L V6 245CID
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Ford Taurus 1996
  • Rear
  • SHO
  • 3.4L V8 207CID
  • Cutting and Welding Required During Installation
Ford Taurus 1997
  • Rear
  • SHO
  • 3.4L V8 207CID
  • Cutting and Welding Required During Installation
Ford Taurus 1998
  • Rear
  • SHO
  • 3.4L V8 207CID
  • Cutting and Welding Required During Installation
Ford Taurus 1999
  • Rear
  • SHO
  • 3.4L V8 207CID
  • Cutting and Welding Required During Installation
Ford Taurus 2000
  • Rear
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Ford Taurus 2001
  • Rear
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Ford Taurus 2002
  • Rear
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Ford Taurus 2003
  • Rear
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Ford Taurus 2004
  • Rear
  • 3L V6 2968CC/181CID
  • 3L V6 2986CC/182CID
  • S
  • Cutting and Welding Required During Installation
Ford Taurus 2005
  • Rear
  • 3L V6 2968CC/181CID
  • 3L V6 2986CC/182CID
  • S
  • Cutting and Welding Required During Installation
  • U
Geo Tracker 1996
  • 1.6L L4 1588CC/98cCID
  • Cutting and Welding Required During Installation
Geo Tracker 1997
  • 1.6L L4 1588CC/98cCID
  • Cutting and Welding Required During Installation
Honda Passport 1996
  • 2.6L L4 2559CC
  • Cutting and Welding Required During Installation
Hyundai Santa Fe 2003
  • Rear
  • 3.5L V6 3500CC
  • Cutting and Welding Required During Installation
Hyundai Santa Fe 2004
  • Rear
  • 3.5L V6 3500CC
  • Cutting and Welding Required During Installation
Hyundai Santa Fe 2005
  • Rear
  • 3.5L V6 3500CC
  • 2.7L V6 2656CC
  • Cutting and Welding Required During Installation
Hyundai Santa Fe 2006
  • Rear
  • 2.7L V6 2656CC
  • 3.5L V6 3467CC
  • Cutting and Welding Required During Installation
Infiniti I30 2000
  • Rear
  • 3L V6 2988CC/182CID
  • Cutting and Welding Required During Installation
Infiniti I30 2001
  • Rear
  • 3L V6 2988CC/182CID
  • Cutting and Welding Required During Installation
Infiniti I35 2002
  • Rear
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Infiniti I35 2003
  • Rear
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Infiniti I35 2004
  • Rear
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Infiniti QX56 2004
  • Rear Right
  • Rear Left
  • 5.6L V8 5552CC
  • Cutting and Welding Required During Installation
Infiniti QX56 2005
  • Rear Right
  • Rear Left
  • 5.6L V8 5552CC
  • Cutting and Welding Required During Installation
Infiniti QX56 2006
  • Rear Right
  • Rear Left
  • 5.6L V8 5552CC
  • Cutting and Welding Required During Installation
Isuzu Trooper 1996
  • Right
  • Automatic
  • 3.2L V6 3165CC
  • Cutting and Welding Required During Installation
Isuzu Trooper 1997
  • Right
  • Automatic
  • 3.2L V6 3165CC
  • Cutting and Welding Required During Installation
Jeep Liberty 2005
  • Left
  • 3.7L V6 226CID
  • Cutting and Welding Required During Installation
Jeep Liberty 2006
  • Left
  • 3.7L V6 226CID
  • Cutting and Welding Required During Installation
Jeep Liberty 2007
  • Left
  • 3.7L V6 226CID
  • Cutting and Welding Required During Installation
Jeep Wrangler 1997
  • 4L L6 242CID
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep Wrangler 1998
  • 4L L6 242CID
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep Wrangler 1999
  • 4L L6 242CID
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep Wrangler 2004
  • Rear
  • 4L L6 242CID
  • Cutting and Welding Required During Installation
Jeep Wrangler 2005
  • Rear
  • 4L L6 242CID
  • Cutting and Welding Required During Installation
Jeep Wrangler 2006
  • Rear
  • 4L L6 242CID
  • Cutting and Welding Required During Installation
Kia Sedona 2002
  • Rear
  • 3.5L V6 3497CC
  • Cutting and Welding Required During Installation
Kia Sedona 2003
  • Rear
  • 3.5L V6 3497CC
  • Cutting and Welding Required During Installation
Kia Sedona 2004
  • Rear
  • 3.5L V6 3497CC
  • Cutting and Welding Required During Installation
Kia Sedona 2005
  • Rear
  • 3.5L V6 3497CC
  • Cutting and Welding Required During Installation
Kia Sportage 1998
  • Rear
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Kia Sportage 1999
  • Rear
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Kia Sportage 2000
  • Rear
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Land Rover Defender 90 1997
  • 4L V8 3950CC
  • Cutting and Welding Required During Installation
Land Rover Discovery 2003
  • 4.6L V8 4554CC/278CID
  • Cutting and Welding Required During Installation
Land Rover Discovery 2004
  • 4.6L V8 4554CC/278CID
  • Cutting and Welding Required During Installation
Land Rover LR3 2005
  • Left
  • Right
  • 4.4L V8 4394CC
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Land Rover LR3 2006
  • Left
  • Right
  • 4L V6 245CID
  • 4.4L V8 4394CC
  • Cutting and Welding Required During Installation
Land Rover LR3 2007
  • Left
  • Right
  • 4L V6 245CID
  • 4.4L V8 4394CC
  • Cutting and Welding Required During Installation
Land Rover LR3 2008
  • Left
  • Right
  • 4.4L V8 4394CC
  • Cutting and Welding Required During Installation
Land Rover Range Rover 1999
  • HSE
  • 4L V8 3950CC
  • 4.6L V8 4554CC/278CID
  • Cutting and Welding Required During Installation
Land Rover Range Rover 2000
  • HSE
  • 4.6L V8 4554CC/278CID
  • Cutting and Welding Required During Installation
Land Rover Range Rover 2001
  • HSE
  • 4.6L V8 4554CC/278CID
  • Cutting and Welding Required During Installation
Land Rover Range Rover 2002
  • HSE
  • 4.6L V8 4554CC/278CID
  • Cutting and Welding Required During Installation
Land Rover Range Rover Sport 2006
  • Left
  • Right
  • HSE
  • 4.4L V8 4394CC
  • Cutting and Welding Required During Installation
Land Rover Range Rover Sport 2007
  • Left
  • Right
  • 4.4L V8 4394CC
  • Cutting and Welding Required During Installation
Land Rover Range Rover Sport 2008
  • Left
  • Right
  • HSE
  • 4.2L V8
  • 4.4L V8 4394CC
  • Cutting and Welding Required During Installation
Lexus ES300 1999
  • Rear
  • 3L V6 2995CC
  • Cutting and Welding Required During Installation
Lexus ES300 2000
  • Rear
  • 3L V6 2995CC
  • Cutting and Welding Required During Installation
Lexus ES300 2001
  • Rear
  • 3L V6 2995CC
  • Cutting and Welding Required During Installation
Lexus GS300 1996
  • Rear
  • 3L L6 2997CC
  • Cutting and Welding Required During Installation
Lexus GS300 1997
  • Rear
  • 3L L6 2997CC
  • Cutting and Welding Required During Installation
Lexus GX470 2003
  • Right
  • Left
  • 4.7L V8 4663CC/285CID
  • Cutting and Welding Required During Installation
Lexus GX470 2004
  • Right
  • Left
  • 4.7L V8 4663CC/285CID
  • Cutting and Welding Required During Installation
Lexus LS400 1996
  • Rear
  • 4L V8 3969CC
  • Cutting and Welding Required During Installation
Lexus LS400 1997
  • Rear
  • 4L V8 3969CC
  • Cutting and Welding Required During Installation
Lexus RX300 1999
  • Right
  • 3L V6 2995CC
  • Cutting and Welding Required During Installation
Lexus RX300 2000
  • Right
  • 3L V6 2995CC
  • Cutting and Welding Required During Installation
Lexus RX300 2001
  • Right
  • 3L V6 2995CC
  • Cutting and Welding Required During Installation
Lexus RX300 2002
  • Right
  • 3L V6 2995CC
  • Cutting and Welding Required During Installation
Lexus RX300 2003
  • Right
  • 3L V6 2995CC
  • Cutting and Welding Required During Installation
Lexus SC400 1996
  • Rear
  • 4L V8 3969CC
  • Cutting and Welding Required During Installation
Lexus SC400 1997
  • Rear
  • 4L V8 3969CC
  • Cutting and Welding Required During Installation
Lincoln Continental 1998
  • Rear
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Lincoln Continental 1999
  • Rear
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Lincoln Continental 2000
  • Rear
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Lincoln Continental 2001
  • Rear
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Lincoln Continental 2002
  • Rear
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Lincoln Town Car 1995
  • Right
  • Left
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Lincoln Town Car 1996
  • Right
  • Left
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Lincoln Town Car 1997
  • Right
  • Left
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Lincoln Town Car 1998
  • Right
  • Left
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Lincoln Town Car 1999
  • Right
  • Left
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Lincoln Town Car 2000
  • Right
  • Left
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Lincoln Town Car 2001
  • Right
  • Left
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Lincoln Town Car 2002
  • Right
  • Left
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Lincoln Zephyr 2006
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Mazda 626 1996
  • Rear
  • 2.5L V6 2497CC
  • 2L L4 1991CC
  • Cutting and Welding Required During Installation
Mazda 626 1997
  • Rear
  • 2.5L V6 2497CC
  • 2L L4 1991CC
  • Cutting and Welding Required During Installation
Mazda B2500 1998
  • 2.5L L4 2492CC
  • Cutting and Welding Required During Installation
Mazda B2500 1999
  • 2.5L L4 2492CC
  • Cutting and Welding Required During Installation
Mazda B2500 2000
  • 2.5L L4 2492CC
  • Cutting and Welding Required During Installation
Mazda B2500 2001
  • 2.5L L4 2492CC
  • Cutting and Welding Required During Installation
Mazda Miata 1996
  • 1.8L L4 1839CC
  • Cutting and Welding Required During Installation
Mazda Miata 1997
  • 1.8L L4 1839CC
  • Cutting and Welding Required During Installation
Mazda MPV 1995
  • Rear
  • 3L V6 2954CC/180CID
  • Cutting and Welding Required During Installation
Mazda MPV 1996
  • Rear
  • 3L V6 2954CC/180CID
  • Cutting and Welding Required During Installation
Mazda MPV 1997
  • Rear
  • 3L V6 2954CC/180CID
  • Cutting and Welding Required During Installation
Mazda MPV 1998
  • Rear
  • 3L V6 2954CC/180CID
  • Cutting and Welding Required During Installation
Mazda MPV 2000
  • 2.5L V6 2450CC/155CID
  • Cutting and Welding Required During Installation
Mazda MPV 2001
  • 2.5L V6 2450CC/155CID
  • Cutting and Welding Required During Installation
Mazda MX-6 1996
  • Rear
  • 2.5L V6 2497CC
  • 2L L4 1991CC
  • Cutting and Welding Required During Installation
Mazda MX-6 1997
  • Rear
  • 2L L4 1991CC
  • Cutting and Welding Required During Installation
Mazda Tribute 2005
  • 3L V6 2968CC/181CID
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Mazda Tribute 2006
  • 3L V6 2968CC/181CID
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Mazda Tribute 2008
  • i
  • 3L V6 2968CC/181CID
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Mazda Tribute 2009
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Mercedes-Benz E320 1996
  • Left
  • Right
  • 3.2L L6 3199CC
  • Cutting and Welding Required During Installation
Mercedes-Benz E320 1997
  • Left
  • Right
  • 3.2L L6 3199CC
  • Cutting and Welding Required During Installation
Mercury Grand Marquis 1995
  • Right
  • Left
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Mercury Grand Marquis 1996
  • Right
  • Left
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Mercury Grand Marquis 1997
  • Right
  • Left
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Mercury Grand Marquis 1998
  • Right
  • Left
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Mercury Grand Marquis 1999
  • Right
  • Left
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Mercury Grand Marquis 2000
  • Right
  • Left
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Mercury Grand Marquis 2001
  • Right
  • Left
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Mercury Grand Marquis 2002
  • Right
  • Left
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Mercury Milan 2006
  • Rear
  • FWD
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Mercury Milan 2007
  • Rear
  • FWD
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Mercury Milan 2008
  • Rear
  • FWD
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Mercury Milan 2009
  • Rear
  • FWD
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Mercury Mountaineer 1997
  • Front Left
  • Front Right
  • Rear
  • 5L V8 302CID
  • Cutting and Welding Required During Installation
Mercury Mountaineer 1998
  • Front Left
  • Front Right
  • Rear
  • Left
  • Right
  • 5L V8 302CID
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
  • E
Mercury Mountaineer 1999
  • Rear Left
  • Rear Right
  • Left
  • Right
  • 5L V8 302CID
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
  • E
Mercury Mountaineer 2000
  • Rear Left
  • Rear Right
  • Left
  • Right
  • 5L V8 302CID
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
  • E
Mercury Mountaineer 2001
  • Rear Left
  • Rear Right
  • Left
  • Right
  • 5L V8 302CID
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
  • E
Mercury Sable 2000
  • Rear
  • 3L V6 2986CC/182CID
  • U
  • Cutting and Welding Required During Installation
Mercury Sable 2001
  • Rear
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Mercury Sable 2002
  • Rear
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Mercury Sable 2003
  • Rear
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Mercury Sable 2004
  • Rear
  • 3L V6 2968CC/181CID
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Mercury Sable 2005
  • Rear
  • 3L V6 2968CC/181CID
  • 3L V6 2986CC/182CID
  • S
  • Cutting and Welding Required During Installation
  • U
Mercury Tracer 1997
  • 2L L4 1989CC/121CID
  • Cutting and Welding Required During Installation
Mercury Tracer 1998
  • 2L L4 1989CC/121CID
  • Cutting and Welding Required During Installation
Mercury Tracer 1999
  • 2L L4 1989CC/121CID
  • Cutting and Welding Required During Installation
Mercury Villager 1999
  • Rear
  • 3.3L V6 3275CC
  • Cutting and Welding Required During Installation
Mercury Villager 2000
  • Rear
  • 3.3L V6 3275CC
  • Cutting and Welding Required During Installation
Mercury Villager 2001
  • Rear
  • 3.3L V6 3275CC
  • Cutting and Welding Required During Installation
Mercury Villager 2002
  • Rear
  • 3.3L V6 3275CC
  • Cutting and Welding Required During Installation
Mitsubishi 3000GT 1996
  • Rear
  • Right
  • 3L V6 2972CC/181CID
  • Naturally Aspirated
  • Turbocharged
  • Cutting and Welding Required During Installation
Mitsubishi 3000GT 1997
  • Rear
  • Right
  • 3L V6 2972CC/181CID
  • Naturally Aspirated
  • Turbocharged
  • Cutting and Welding Required During Installation
Mitsubishi 3000GT 1998
  • Rear
  • Right
  • 3L V6 2972CC/181CID
  • Naturally Aspirated
  • Turbocharged
  • Cutting and Welding Required During Installation
Mitsubishi 3000GT 1999
  • Rear
  • Right
  • 3L V6 2972CC/181CID
  • Naturally Aspirated
  • Turbocharged
  • Cutting and Welding Required During Installation
Mitsubishi Diamante 1996
  • Rear
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Mitsubishi Diamante 1998
  • Rear
  • 3.5L V6 3497CC/215CID
  • Cutting and Welding Required During Installation
Mitsubishi Diamante 1999
  • Rear
  • 3.5L V6 3497CC/215CID
  • Cutting and Welding Required During Installation
Mitsubishi Diamante 2000
  • Rear
  • 3.5L V6 3497CC/215CID
  • Cutting and Welding Required During Installation
Mitsubishi Diamante 2001
  • Rear
  • 3.5L V6 3497CC/215CID
  • Cutting and Welding Required During Installation
Mitsubishi Diamante 2002
  • Rear
  • 3.5L V6 3497CC/215CID
  • Cutting and Welding Required During Installation
Mitsubishi Eclipse 2000
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Mitsubishi Galant 1999
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Mitsubishi Galant 2000
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Mitsubishi Galant 2001
  • Rear
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Mitsubishi Galant 2002
  • Rear
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Mitsubishi Galant 2003
  • Rear
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Mitsubishi Montero 2001
  • Front Left
  • 3.5L V6 3497CC/215CID
  • Cutting and Welding Required During Installation
Mitsubishi Montero 2002
  • Front Left
  • 3.5L V6 3497CC/215CID
  • Cutting and Welding Required During Installation
Mitsubishi Montero Sport 1997
  • Rear
  • 3L V6 2972CC/181CID
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Mitsubishi Montero Sport 1998
  • Rear
  • 3L V6 2972CC/181CID
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Mitsubishi Montero Sport 1999
  • Rear
  • 3.5L V6 3497CC/215CID
  • 3L V6 2972CC/181CID
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Mitsubishi Montero Sport 2000
  • Rear
  • 3.5L V6 3497CC/215CID
  • 3L V6 2972CC/181CID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
Mitsubishi Montero Sport 2001
  • Rear
  • 3.5L V6 3497CC/215CID
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
  • Federal Emissions Equipped
Mitsubishi Montero Sport 2002
  • Rear
  • 3.5L V6 3497CC/215CID
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Mitsubishi Montero Sport 2003
  • Rear
  • 3.5L V6 3497CC/215CID
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Nissan Altima 1998
  • Rear
  • 2.4L L4 2389CC
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Nissan Altima 1999
  • Rear
  • 2.4L L4 2389CC
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Nissan Altima 2000
  • Rear
  • 2.4L L4 2389CC
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Nissan Altima 2001
  • Rear
  • 2.4L L4 2389CC
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Nissan Maxima 2000
  • Rear
  • 3L V6 2988CC/182CID
  • Cutting and Welding Required During Installation
Nissan Maxima 2001
  • Rear
  • 3L V6 2988CC/182CID
  • Cutting and Welding Required During Installation
Nissan Maxima 2002
  • Rear
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Nissan Maxima 2003
  • Rear
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Nissan Quest 1999
  • Rear
  • 3.3L V6 3275CC
  • Cutting and Welding Required During Installation
Nissan Quest 2000
  • Rear
  • 3.3L V6 3275CC
  • Cutting and Welding Required During Installation
Nissan Quest 2001
  • Rear
  • 3.3L V6 3275CC
  • Cutting and Welding Required During Installation
Nissan Quest 2002
  • Rear
  • 3.3L V6 3275CC
  • Cutting and Welding Required During Installation
Nissan Sentra 1997
  • 1.6L L4 1597CC/97cCID
  • Cutting and Welding Required During Installation
Nissan Sentra 1998
  • 1.6L L4 1597CC/97cCID
  • Cutting and Welding Required During Installation
Nissan Sentra 1999
  • 1.6L L4 1597CC/97cCID
  • Cutting and Welding Required During Installation
Nissan Sentra 2000
  • Rear
  • 1.8L L4 1769CC
  • Cutting and Welding Required During Installation
Nissan Sentra 2001
  • Rear
  • 1.8L L4 1769CC
  • Cutting and Welding Required During Installation
Nissan Sentra 2002
  • Rear
  • 2.5L L4 2488CC/152CID
  • 1.8L L4 1769CC
  • Cutting and Welding Required During Installation
Nissan Sentra 2003
  • 2.5L L4 2488CC/152CID
  • Cutting and Welding Required During Installation
Nissan Sentra 2004
  • 2.5L L4 2488CC/152CID
  • Cutting and Welding Required During Installation
Nissan Sentra 2005
  • 2.5L L4 2488CC/152CID
  • Cutting and Welding Required During Installation
Nissan Sentra 2006
  • 2.5L L4 2488CC/152CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Ciera 1996
  • 2.2L L4 2190CC/134CID
  • Cutting and Welding Required During Installation
Oldsmobile Silhouette 1997
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Oldsmobile Silhouette 1998
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Oldsmobile Silhouette 1999
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Oldsmobile Silhouette 2000
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Plymouth Breeze 1996
  • 2L L4 1996CC/122CID
  • Cutting and Welding Required During Installation
Plymouth Breeze 1997
  • 2L L4 1996CC/122CID
  • Cutting and Welding Required During Installation
Plymouth Grand Voyager 1996
  • 3.3L V6 3301CC/201CID
  • 3L V6 2972CC/181CID
  • 2.4L L4 2429CC/148CID
  • Cutting and Welding Required During Installation
Plymouth Grand Voyager 1997
  • 3.3L V6 3301CC/201CID
  • Cutting and Welding Required During Installation
Plymouth Grand Voyager 1998
  • 3.3L V6 3301CC/201CID
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Plymouth Grand Voyager 1999
  • 3.3L V6 3301CC/201CID
  • 3.8L V6 3778CC/231CID
  • Cutting and Welding Required During Installation
Plymouth Grand Voyager 2000
  • 3.3L V6 3301CC/201CID
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Plymouth Voyager 1996
  • 3.3L V6 3301CC/201CID
  • 3L V6 2972CC/181CID
  • 2.4L L4 2429CC/148CID
  • Cutting and Welding Required During Installation
Plymouth Voyager 1997
  • 3.3L V6 3301CC/201CID
  • 3L V6 2972CC/181CID
  • 2.4L L4 2429CC/148CID
  • Cutting and Welding Required During Installation
Plymouth Voyager 1998
  • 3.3L V6 3301CC/201CID
  • 2.4L L4 2429CC/148CID
  • Cutting and Welding Required During Installation
Plymouth Voyager 1999
  • 3.3L V6 3301CC/201CID
  • 3.8L V6 3778CC/231CID
  • 3L V6 2972CC/181CID
  • 2.4L L4 2429CC/148CID
  • Cutting and Welding Required During Installation
Plymouth Voyager 2000
  • 3.3L V6 3301CC/201CID
  • 3L V6 2972CC/181CID
  • 2.4L L4 2429CC/148CID
  • Cutting and Welding Required During Installation
Pontiac Firebird 1996
  • Left
  • Right
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Pontiac Firebird 1997
  • Left
  • Right
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Pontiac Firebird 1998
  • Right
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Pontiac Firebird 1999
  • Right
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Pontiac Montana 1999
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Pontiac Montana 2000
  • 3.4L V6 207CID
  • Cutting and Welding Required During Installation
Pontiac Sunrunner 1996
  • 1.6L L4 1588CC/98cCID
  • Cutting and Welding Required During Installation
  • CAN
Pontiac Sunrunner 1997
  • 1.6L L4 1588CC/98cCID
  • Cutting and Welding Required During Installation
  • CAN
Saab 9000 1996
  • 2.3L L4 2290CC
  • 3L V6 2961CC/181CID
  • Cutting and Welding Required During Installation
Saab 9000 1997
  • 2.3L L4 2290CC
  • 3L V6 2961CC/181CID
  • Cutting and Welding Required During Installation
Saab 9000 1998
  • 2.3L L4 2290CC
  • Cutting and Welding Required During Installation
Saturn SC1 1996
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SC1 1997
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SL 1996
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SL 1997
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SL1 1996
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SL1 1997
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SW1 1996
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SW1 1997
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Suzuki Sidekick 1996
  • 1.6L L4 1590CC/97cCID
  • 1.8L L4 1840CC
  • Cutting and Welding Required During Installation
Suzuki Sidekick 1997
  • 1.6L L4 1590CC/97cCID
  • 1.8L L4 1840CC
  • Cutting and Welding Required During Installation
Suzuki Sidekick 1998
  • 1.6L L4 1590CC/97cCID
  • 1.8L L4 1840CC
  • Cutting and Welding Required During Installation
Suzuki Vitara 1999
  • Front
  • 1.6L L4 1590CC/97cCID
  • 2L L4 2000CC
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Suzuki Vitara 2000
  • Front
  • 1.6L L4 1590CC/97cCID
  • 2L L4 2000CC
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Suzuki Vitara 2001
  • Front
  • 1.6L L4 1590CC/97cCID
  • 2L L4 2000CC
  • Cutting and Welding Required During Installation
Suzuki Vitara 2002
  • Front
  • 2L L4 2000CC
  • Cutting and Welding Required During Installation
Suzuki Vitara 2003
  • Front
  • 2L L4 2000CC
  • Cutting and Welding Required During Installation
Suzuki X-90 1996
  • 1.6L L4 1590CC/97cCID
  • Cutting and Welding Required During Installation
Suzuki X-90 1997
  • 1.6L L4 1590CC/97cCID
  • Cutting and Welding Required During Installation
Suzuki X-90 1998
  • 1.6L L4 1590CC/97cCID
  • Cutting and Welding Required During Installation
Toyota 4Runner 2003
  • Rear
  • 4.7L V8 4663CC/285CID
  • Cutting and Welding Required During Installation
Toyota 4Runner 2004
  • Rear
  • 4.7L V8 4663CC/285CID
  • Cutting and Welding Required During Installation
Toyota Avalon 1996
  • 3L V6 2995CC
  • Cutting and Welding Required During Installation
Toyota Avalon 1997
  • 3L V6 2995CC
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
Toyota Avalon 1998
  • 3L V6 2995CC
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
Toyota Avalon 1999
  • 3L V6 2995CC
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
Toyota Avalon 2000
  • Rear
  • 3L V6 2995CC
  • Cutting and Welding Required During Installation
Toyota Avalon 2001
  • Rear
  • 3L V6 2995CC
  • Cutting and Welding Required During Installation
Toyota Avalon 2002
  • Rear
  • 3L V6 2995CC
  • Cutting and Welding Required During Installation
Toyota Avalon 2003
  • Rear
  • 3L V6 2995CC
  • Cutting and Welding Required During Installation
Toyota Avalon 2004
  • Rear
  • 3L V6 2995CC
  • Cutting and Welding Required During Installation
Toyota Camry 1996
  • 3L V6 2995CC
  • Cutting and Welding Required During Installation
Toyota Camry 1997
  • 2.2L L4 2164CC
  • Cutting and Welding Required During Installation
Toyota Camry 1998
  • 2.2L L4 2164CC
  • Cutting and Welding Required During Installation
Toyota Camry 1999
  • 2.2L L4 2164CC
  • Cutting and Welding Required During Installation
Toyota Camry 2000
  • 2.2L L4 2164CC
  • GAS
  • Cutting and Welding Required During Installation
Toyota Camry 2001
  • Automatic
  • 3L V6 2995CC
  • 2.2L L4 2164CC
  • Cutting and Welding Required During Installation
  • GAS
Toyota Camry 2002
  • Rear
  • 3L V6 2995CC
  • 2.4L L4 2362CC/-CID
  • Cutting and Welding Required During Installation
  • Split Date To: 09/2003
Toyota Camry 2003
  • Rear
  • 3L V6 2995CC
  • 2.4L L4 2362CC/-CID
  • Cutting and Welding Required During Installation
  • Split Date To: 09/2003
Toyota Camry 2004
  • Rear
  • 3L V6 2995CC
  • 2.4L L4 2362CC/-CID
  • Cutting and Welding Required During Installation
  • Split Date To: 09/2003
Toyota Camry 2010
  • 2.5L L4 2494CC/152CID
  • Cutting and Welding Required During Installation
Toyota Celica 1988
  • GT
  • ST
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Toyota Celica 1989
  • GT
  • ST
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Toyota Celica 1990
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Toyota Highlander 2001
  • Right
  • Left
  • 3L V6 2995CC
  • Cutting and Welding Required During Installation
Toyota Highlander 2002
  • Right
  • Left
  • 3L V6 2995CC
  • Cutting and Welding Required During Installation
Toyota Highlander 2003
  • Right
  • Left
  • 3L V6 2995CC
  • Cutting and Welding Required During Installation
Toyota RAV4 1996
  • Rear
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Toyota RAV4 1997
  • Rear
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Toyota Sequoia 2001
  • Right
  • Left
  • 4.7L V8 4663CC/285CID
  • Cutting and Welding Required During Installation
Toyota Sequoia 2002
  • Right
  • Left
  • 4.7L V8 4663CC/285CID
  • Cutting and Welding Required During Installation
Toyota Sequoia 2003
  • Right
  • Left
  • 4.7L V8 4663CC/285CID
  • Cutting and Welding Required During Installation
Toyota Sequoia 2004
  • Right
  • Left
  • 4.7L V8 4663CC/285CID
  • Cutting and Welding Required During Installation
Toyota Sienna 1998
  • 3L V6 2995CC
  • Cutting and Welding Required During Installation
Toyota Sienna 1999
  • 3L V6 2995CC
  • Cutting and Welding Required During Installation
Toyota Sienna 2000
  • 3L V6 2995CC
  • Cutting and Welding Required During Installation
Toyota Sienna 2001
  • Rear
  • 3L V6 2995CC
  • Cutting and Welding Required During Installation
Toyota Sienna 2002
  • Rear
  • 3L V6 2995CC
  • Cutting and Welding Required During Installation
Toyota Sienna 2003
  • Rear
  • 3L V6 2995CC
  • Cutting and Welding Required During Installation
Toyota Solara 1999
  • Automatic
  • 3L V6 2995CC
  • Cutting and Welding Required During Installation
Toyota Solara 2000
  • Automatic
  • 3L V6 2995CC
  • 2.2L L4 2164CC
  • Cutting and Welding Required During Installation
Toyota Solara 2001
  • Automatic
  • 3L V6 2995CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Toyota Solara 2002
  • Automatic
  • 3L V6 2995CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Toyota Solara 2003
  • Rear
  • 3L V6 2995CC
  • Cutting and Welding Required During Installation
Toyota T100 1996
  • 4WD
  • 3.4L V6 3378CC
  • 2.7L L4 2694CC
  • Cutting and Welding Required During Installation
Toyota T100 1997
  • 4WD
  • 3.4L V6 3378CC
  • 2.7L L4 2694CC
  • Cutting and Welding Required During Installation
Toyota T100 1998
  • 4WD
  • 3.4L V6 3378CC
  • 2.7L L4 2694CC
  • Cutting and Welding Required During Installation
Toyota Tacoma 1995
  • 2.7L L4 2694CC
  • Cutting and Welding Required During Installation
Toyota Tacoma 1996
  • RWD
  • 3.4L V6 3378CC
  • 2.7L L4 2694CC
  • Cutting and Welding Required During Installation
Toyota Tacoma 1997
  • RWD
  • 3.4L V6 3378CC
  • 2.7L L4 2694CC
  • Cutting and Welding Required During Installation
Toyota Tacoma 1998
  • RWD
  • 3.4L V6 3378CC
  • 2.7L L4 2694CC
  • Cutting and Welding Required During Installation
Toyota Tacoma 1999
  • 2.7L L4 2694CC
  • Cutting and Welding Required During Installation
Toyota Tacoma 2000
  • 2.7L L4 2694CC
  • Cutting and Welding Required During Installation
Toyota Tacoma 2001
  • Rear
  • 3.4L V6 3378CC
  • 2.7L L4 2694CC
  • 2.4L L4 2438CC
  • Cutting and Welding Required During Installation
Toyota Tacoma 2002
  • Rear
  • 3.4L V6 3378CC
  • 2.7L L4 2694CC
  • 2.4L L4 2438CC
  • Cutting and Welding Required During Installation
Toyota Tacoma 2003
  • Rear
  • 3.4L V6 3378CC
  • 2.7L L4 2694CC
  • 2.4L L4 2438CC
  • Cutting and Welding Required During Installation
Toyota Tacoma 2004
  • Rear
  • 3.4L V6 3378CC
  • 2.7L L4 2694CC
  • 2.4L L4 2438CC
  • Cutting and Welding Required During Installation
Volvo 850 1996
  • Automatic
  • 2.4L L5 2435CC
  • Cutting and Welding Required During Installation
Volvo 850 1997
  • 2.4L L5 2435CC
  • Cutting and Welding Required During Installation
Volvo S70 1998
  • 2.4L L5 2435CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Volvo V70 1998
  • 2.3L L5 2319CC
  • Cutting and Welding Required During Installation