Canada Post's strikeCanada Post resumed its operationsNo unusual delay in transit expected
100% CANADIAN BASED 100% CANADIAN
NO DUTIES OR CUSTOMS FEES NO CUSTOMS FEES
AUTHORIZED DEALER AUTH. DEALER
30-DAY HASSLE-FREE RETURNS 30-DAY RETURNS

MagnaFlowStainless Federal Heavy Metal Catalytic Converter without Sensor Port (2.5" IN\/2.5" OUT)

AUTHORIZED DEALER

99006HM

Manufacturer Part Number
*Images are for illustrative purpose only. Actual Product may differ.
SKU: MAG-99006HM
Please select a vehicle to verify fitment.

Please Select a Vehicle

This will be used to show you compatible parts.

Auto Parts Finder

This product doesn't fit your selection!

The product shown on this page is not compatible with the selected vehicle

!
To ensure proper parts fitment, please browse compatible products or change your selection.


Change Current Selection
FREE Shipping*
Standard Warranty

Special Order
1-3 Weeks
CA $304.00
Stainless Federal Heavy Metal Catalytic Converter without Sensor Port (2.5" IN\/2.5" OUT) is available to buy in increments of 1
AUTHORIZED DEALER

99006HM

Manufacturer Part Number
More Information
Manufacturer MagnaFlow
Manufacturer Part Number 99006HM
Manufacturer's Suggested Retail Price (MSRP) 168.96
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
This table represents all the 474 compatible vehicles for this part:
Make Model Year
Application Notes
Position Submodel Transmission Body Type Drive Type Engine Additional Information
Buick Rainier 2004
  • 4.2L L6 256CID
  • Cutting and Welding Required During Installation
Buick Rainier 2005
  • 4.2L L6 256CID
  • Cutting and Welding Required During Installation
Buick Rainier 2006
  • 4.2L L6 256CID
  • Cutting and Welding Required During Installation
Buick Rainier 2007
  • 4.2L L6 256CID
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
Cadillac Escalade 2002
  • Right
  • Left
  • RWD
  • 6L V8 5967CC/364CID
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
Cadillac Escalade 2003
  • Right
  • Left
  • RWD
  • 6L V8 5967CC/364CID
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
Cadillac Escalade 2004
  • Right
  • Left
  • RWD
  • 6L V8 5967CC/364CID
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
Cadillac Escalade 2005
  • Right
  • Left
  • RWD
  • 6L V8 5967CC/364CID
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
Cadillac Escalade 2006
  • Right
  • Left
  • 6L V8 5967CC/364CID
  • Cutting and Welding Required During Installation
Chevrolet Avalanche 2007
  • Left
  • Right
  • 5.3L V8 5328CC/325CID
  • 6L V8 5967CC/364CID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
Chevrolet Avalanche 2009
  • Left
  • Right
  • 5.3L V8 5328CC/325CID
  • 6L V8 5967CC/364CID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
Chevrolet Avalanche 1500 2002
  • Left
  • Right
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
Chevrolet Avalanche 1500 2003
  • Left
  • Right
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
Chevrolet Avalanche 1500 2004
  • Left
  • Right
  • RWD
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
Chevrolet Avalanche 1500 2005
  • Left
  • Right
  • RWD
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
Chevrolet Avalanche 1500 2006
  • Left
  • Right
  • RWD
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
Chevrolet Blazer 1996
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet Blazer 1997
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet Blazer 1998
  • Rear
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet Blazer 1999
  • Rear
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet Blazer 2001
  • Rear
  • RWD
  • 4.3L V6 262CID
  • 4
  • Cutting and Welding Required During Installation
Chevrolet Blazer 2002
  • Rear
  • RWD
  • 4.3L V6 262CID
  • 4
  • Cutting and Welding Required During Installation
Chevrolet Blazer 2003
  • Rear
  • RWD
  • 4.3L V6 262CID
  • 4
  • Cutting and Welding Required During Installation
Chevrolet Blazer 2004
  • Rear
  • RWD
  • 4.3L V6 262CID
  • 4
  • Cutting and Welding Required During Installation
Chevrolet Blazer 2005
  • Rear
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet Colorado 2004
  • Rear
  • Sport
  • Sport LS
  • Z85 LS
  • Z85
  • 2.8L L4 2770CC/169CID
  • 3.5L L5 3460CC/211CID
  • with Sport Chassis
  • Cutting and Welding Required During Installation
Chevrolet Colorado 2005
  • Rear
  • Sport
  • Sport LS
  • Z85 LS
  • Z85
  • 2.8L L4 2770CC/169CID
  • 3.5L L5 3460CC/211CID
  • with Sport Chassis
  • Cutting and Welding Required During Installation
Chevrolet Colorado 2007
  • Rear
  • 3.7L L5
  • 2.9L L4
  • Cutting and Welding Required During Installation
Chevrolet Colorado 2008
  • Rear
  • 3.7L L5
  • 2.9L L4
  • Cutting and Welding Required During Installation
Chevrolet Colorado 2009
  • Rear
  • 3.7L L5
  • 2.9L L4
  • Cutting and Welding Required During Installation
Chevrolet Corvette 1996
  • Left
  • Right
  • 5.7L V8 350CID
  • 5.7L V8 5733CC/350CID
  • Cutting and Welding Required During Installation
Chevrolet Express 1500 1996
  • Left
  • Right
  • 5.7L V8 350CID
  • To 8,500lbs. Gross Vehicle Weight
  • Cutting and Welding Required During Installation
Chevrolet Express 1500 1997
  • Left
  • Right
  • 5.7L V8 350CID
  • To 8,500lbs. Gross Vehicle Weight
  • Cutting and Welding Required During Installation
Chevrolet Express 1500 1998
  • Left
  • Right
  • 5.7L V8 350CID
  • To 8,500lbs. Gross Vehicle Weight
  • Cutting and Welding Required During Installation
Chevrolet Express 1500 1999
  • Left
  • Right
  • 5.7L V8 350CID
  • To 8,500lbs. Gross Vehicle Weight
  • Cutting and Welding Required During Installation
Chevrolet Express 1500 2000
  • Left
  • Right
  • 5.7L V8 350CID
  • To 8,500lbs. Gross Vehicle Weight
  • Cutting and Welding Required During Installation
Chevrolet Express 1500 2001
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet Express 1500 2002
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet Express 1500 2003
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
Chevrolet Express 1500 2004
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
Chevrolet Express 1500 2005
  • Left
  • Right
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
Chevrolet Express 1500 2006
  • Left
  • Right
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
Chevrolet Express 2500 1996
  • Left
  • Right
  • 5.7L V8 350CID
  • Over 8,500lbs. Gross Vehicle Weight
  • Cutting and Welding Required During Installation
  • To 8,500lbs. Gross Vehicle Weight
Chevrolet Express 2500 1997
  • Left
  • Right
  • 5.7L V8 350CID
  • To 8,500lbs. Gross Vehicle Weight
  • Cutting and Welding Required During Installation
Chevrolet Express 2500 1998
  • Left
  • Right
  • 5.7L V8 350CID
  • To 8,500lbs. Gross Vehicle Weight
  • Cutting and Welding Required During Installation
Chevrolet Express 2500 1999
  • Left
  • Right
  • 5.7L V8 350CID
  • To 8,500lbs. Gross Vehicle Weight
  • Cutting and Welding Required During Installation
Chevrolet Express 2500 2000
  • Right
  • Left
  • 5.7L V8 350CID
  • To 8,500lbs. Gross Vehicle Weight
  • Cutting and Welding Required During Installation
Chevrolet Express 2500 2003
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
Chevrolet Express 2500 2004
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
Chevrolet Express 2500 2005
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
Chevrolet Express 3500 1996
  • Left
  • Right
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet Express 3500 1997
  • Left
  • Right
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet Express 3500 1998
  • Left
  • Right
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet Express 3500 1999
  • Left
  • Right
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet Express 3500 2000
  • Left
  • Right
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet G30 1996
  • Left
  • Right
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet S10 1996
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet S10 1997
  • 4WD
  • RWD
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet S10 1998
  • RWD
  • 4WD
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet S10 1999
  • RWD
  • 4WD
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet S10 2000
  • Automatic
  • RWD
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet S10 2001
  • Automatic
  • RWD
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet S10 2002
  • Automatic
  • RWD
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet S10 2003
  • Automatic
  • RWD
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet Silverado 1500 Classic 2007
  • Left
  • Right
  • 4.8L V8 294CID
  • 5.3L V8 5328CC/325CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Chevrolet Silverado 1500 1999
  • Left
  • Right
  • 5.3L V8 5328CC/325CID
  • 4.3L V6 262CID
  • 4.8L V8 294CID
  • Cutting and Welding Required During Installation
Chevrolet Silverado 1500 2000
  • Left
  • Right
  • 5.3L V8 5328CC/325CID
  • 4.3L V6 262CID
  • 4.8L V8 294CID
  • Cutting and Welding Required During Installation
Chevrolet Silverado 1500 2001
  • Left
  • Right
  • 5.3L V8 5328CC/325CID
  • 4.3L V6 262CID
  • 4.8L V8 294CID
  • Cutting and Welding Required During Installation
Chevrolet Silverado 1500 2002
  • Left
  • Right
  • 5.3L V8 5328CC/325CID
  • 4.3L V6 262CID
  • 4.8L V8 294CID
  • Cutting and Welding Required During Installation
Chevrolet Silverado 1500 2003
  • Left
  • Right
  • 5.3L V8 5328CC/325CID
  • 4.3L V6 262CID
  • 4.8L V8 294CID
  • Cutting and Welding Required During Installation
Chevrolet Silverado 1500 2004
  • Left
  • Right
  • 5.3L V8 5328CC/325CID
  • 4.3L V6 262CID
  • 4.8L V8 294CID
  • Cutting and Welding Required During Installation
Chevrolet Silverado 1500 2005
  • Left
  • Right
  • 5.3L V8 5328CC/325CID
  • 4.3L V6 262CID
  • 4.8L V8 294CID
  • Cutting and Welding Required During Installation
Chevrolet Silverado 1500 2006
  • Left
  • Right
  • 4.3L V6 262CID
  • 4.8L V8 294CID
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
Chevrolet Silverado 1500 2007
  • Right
  • Left
  • 4.3L V6 262CID
  • 4.8L V8 294CID
  • 5.3L V8 5328CC/325CID
  • Federal Emissions Equipped (Tier 1)
  • Cutting and Welding Required During Installation
  • Federal Emissions Equipped
Chevrolet Silverado 1500 2009
  • Left
  • Right
  • 4.3L V6 262CID
  • 4.8L V8 294CID
  • 5.3L V8 5328CC/325CID
  • 6L V8 5967CC/364CID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
Chevrolet Silverado 1500 2010
  • Left
  • Right
  • 4.3L V6 262CID
  • 4.8L V8 294CID
  • 5.3L V8 5328CC/325CID
  • 6L V8 5967CC/364CID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
Chevrolet Silverado 1500 2011
  • Left
  • Right
  • 4.3L V6 262CID
  • 4.8L V8 294CID
  • 5.3L V8 5328CC/325CID
  • 6L V8 5967CC/364CID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
Chevrolet Silverado 1500 2012
  • Right
  • Left
  • 4.3L V6 262CID
  • 4.8L V8 294CID
  • 5.3L V8 5328CC/325CID
  • 6L V8 5967CC/364CID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
Chevrolet Silverado 1500 2013
  • Right
  • Left
  • 4.3L V6 262CID
  • 4.8L V8 294CID
  • 5.3L V8 5328CC/325CID
  • 6L V8 5967CC/364CID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
Chevrolet Silverado 2500 1999
  • Left
  • Right
  • 5.3L V8 5328CC/325CID
  • 6L V8 5967CC/364CID
  • Cutting and Welding Required During Installation
Chevrolet Silverado 2500 2000
  • Left
  • Right
  • 5.3L V8 5328CC/325CID
  • 6L V8 5967CC/364CID
  • Cutting and Welding Required During Installation
Chevrolet SSR 2003
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
Chevrolet SSR 2004
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
Chevrolet SSR 2005
  • 6L V8 5967CC/364CID
  • Cutting and Welding Required During Installation
Chevrolet SSR 2006
  • 6L V8 5967CC/364CID
  • Cutting and Welding Required During Installation
Chevrolet Suburban 1500 2000
  • Left
  • Right
  • RWD
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
Chevrolet Suburban 1500 2001
  • Left
  • Right
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
Chevrolet Suburban 1500 2002
  • Left
  • Right
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
Chevrolet Suburban 1500 2003
  • Left
  • Right
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
Chevrolet Suburban 1500 2004
  • Left
  • Right
  • RWD
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
Chevrolet Suburban 1500 2005
  • Left
  • Right
  • RWD
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
Chevrolet Suburban 1500 2006
  • Right
  • Left
  • RWD
  • 6L V8 5967CC/364CID
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
Chevrolet Suburban 1500 2009
  • Left
  • Right
  • 5.3L V8 5328CC/325CID
  • 6L V8 5967CC/364CID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
Chevrolet Suburban 1500 2010
  • Right
  • Left
  • 5.3L V8 5328CC/325CID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
Chevrolet Suburban 1500 2011
  • Right
  • Left
  • 5.3L V8 5328CC/325CID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
Chevrolet Suburban 1500 2012
  • Left
  • Right
  • 5.3L V8 5328CC/325CID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
Chevrolet Suburban 1500 2013
  • Left
  • Right
  • 5.3L V8 5328CC/325CID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
Chevrolet Tahoe 2000
  • Left
  • Right
  • 5.3L V8 5328CC/325CID
  • 4.8L V8 294CID
  • Cutting and Welding Required During Installation
Chevrolet Tahoe 2001
  • Left
  • Right
  • 5.3L V8 5328CC/325CID
  • 4.8L V8 294CID
  • Cutting and Welding Required During Installation
Chevrolet Tahoe 2002
  • Left
  • Right
  • 5.3L V8 5328CC/325CID
  • 4.8L V8 294CID
  • Cutting and Welding Required During Installation
Chevrolet Tahoe 2003
  • Left
  • Right
  • 5.3L V8 5328CC/325CID
  • 4.8L V8 294CID
  • Cutting and Welding Required During Installation
Chevrolet Tahoe 2004
  • Left
  • Right
  • 5.3L V8 5328CC/325CID
  • 4.8L V8 294CID
  • Cutting and Welding Required During Installation
Chevrolet Tahoe 2005
  • Left
  • Right
  • 5.3L V8 5328CC/325CID
  • 4.8L V8 294CID
  • Cutting and Welding Required During Installation
Chevrolet Tahoe 2006
  • Left
  • Right
  • 4.8L V8 294CID
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
Chevrolet Tahoe 2009
  • Left
  • Right
  • 4.8L V8 294CID
  • 5.3L V8 5328CC/325CID
  • 6.2L V8 6162CC/376CID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
Chevrolet Tahoe 2012
  • Left
  • Right
  • 5.3L V8 5328CC/325CID
  • 6L V8 5967CC/364CID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
Chevrolet Tahoe 2013
  • Left
  • Right
  • 5.3L V8 5328CC/325CID
  • 6L V8 5967CC/364CID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
Chevrolet Trailblazer 2002
  • 4.2L L6 256CID
  • Cutting and Welding Required During Installation
Chevrolet Trailblazer 2003
  • 4.2L L6 256CID
  • Cutting and Welding Required During Installation
Chevrolet Trailblazer 2004
  • 4.2L L6 256CID
  • Cutting and Welding Required During Installation
Chevrolet Trailblazer 2005
  • 4.2L L6 256CID
  • Cutting and Welding Required During Installation
Chevrolet Trailblazer 2006
  • 6L V8 5967CC/364CID
  • 4.2L L6 256CID
  • Cutting and Welding Required During Installation
Chevrolet Trailblazer 2007
  • 6L V8 5967CC/364CID
  • 4.2L L6 256CID
  • Cutting and Welding Required During Installation
Chevrolet Trailblazer 2008
  • 6L V8 5967CC/364CID
  • 4.2L L6 256CID
  • Cutting and Welding Required During Installation
Chevrolet Trailblazer 2009
  • 6L V8 5967CC/364CID
  • Cutting and Welding Required During Installation
Chevrolet Trailblazer EXT 2002
  • 4.2L L6 256CID
  • Cutting and Welding Required During Installation
Chevrolet Trailblazer EXT 2003
  • 4.2L L6 256CID
  • Cutting and Welding Required During Installation
Chevrolet Trailblazer EXT 2004
  • 4.2L L6 256CID
  • Cutting and Welding Required During Installation
Chevrolet Trailblazer EXT 2005
  • 4.2L L6 256CID
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
Chevrolet Trailblazer EXT 2006
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
Dodge Dakota 1996
  • Standard Cab Pickup
  • 3.9L V6 3906CC/239CID
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
  • 78
Dodge Dakota 1997
  • 3.9L V6 3906CC/239CID
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Dodge Dakota 1998
  • 3.9L V6 3906CC/239CID
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge Dakota 1999
  • 3.9L V6 3906CC/239CID
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge Dakota 2000
  • RWD
  • 4WD
  • 4.7L V8 287CID
  • 3.9L V6 3906CC/239CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Federal Emissions Equipped
Dodge Dakota 2001
  • RWD
  • 4WD
  • 4.7L V8 287CID
  • 3.9L V6 3906CC/239CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Federal Emissions Equipped
Dodge Dakota 2002
  • RWD
  • 4WD
  • 4.7L V8 287CID
  • 3.9L V6 3906CC/239CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Federal Emissions Equipped
Dodge Dakota 2003
  • RWD
  • 4WD
  • 4.7L V8 287CID
  • 3.9L V6 3906CC/239CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Federal Emissions Equipped
Dodge Durango 1998
  • 4WD
  • 3.9L V6 3906CC/239CID
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge Durango 1999
  • RWD
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge Durango 2000
  • 4.7L V8 287CID
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge Durango 2001
  • 4.7L V8 287CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge Durango 2002
  • 4.7L V8 287CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge Durango 2003
  • 4.7L V8 287CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge Neon 1996
  • 2L L4 1996CC/122CID
  • Cutting and Welding Required During Installation
Dodge Neon 1997
  • 2L L4 1996CC/122CID
  • Cutting and Welding Required During Installation
Dodge Neon 1998
  • 2L L4 1996CC/122CID
  • Cutting and Welding Required During Installation
Dodge Neon 1999
  • 2L L4 1996CC/122CID
  • Cutting and Welding Required During Installation
Dodge Ram 1500 Pickup 2002
  • Rear
  • 3.7L V6 226CID
  • 4.7L V8 287CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge Ram 1500 Pickup 2003
  • Rear
  • 3.7L V6 226CID
  • 4.7L V8 287CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge Ram 1500 Pickup 2006
  • 5.7L V8 345CID
  • Solid Front Axle
  • Cutting and Welding Required During Installation
Ford Bronco 1996
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline 1996
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline 1997
  • Left
  • Right
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline 1998
  • Left
  • Right
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline 1999
  • Left
  • Right
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline Club Wagon 1996
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline Club Wagon 1997
  • Left
  • Right
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline Club Wagon 1998
  • Left
  • Right
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Ford E-150 Econoline Club Wagon 1999
  • Left
  • Right
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Ford E-250 Econoline 1996
  • Rear
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • To 8,500lbs. Gross Vehicle Weight
  • Cutting and Welding Required During Installation
Ford E-350 Econoline 1996
  • Rear
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-350 Econoline Club Wagon 1996
  • Rear
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-350 Super Duty 2005
  • Left
  • Right
  • 5.4L V8 330CID
  • Cutting and Welding Required During Installation
Ford E-350 Super Duty 2006
  • Left
  • Right
  • 5.4L V8 330CID
  • Cutting and Welding Required During Installation
Ford E-350 Super Duty 2007
  • Left
  • Right
  • 5.4L V8 330CID
  • Cutting and Welding Required During Installation
Ford E-250 2005
  • Left
  • Right
  • 5.4L V8 330CID
  • Cutting and Welding Required During Installation
Ford E-250 2006
  • Left
  • Right
  • 5.4L V8 330CID
  • Cutting and Welding Required During Installation
Ford E-250 2007
  • Left
  • Right
  • 5.4L V8 330CID
  • Cutting and Welding Required During Installation
Ford Expedition 2003
  • Rear Left
  • Rear Right
  • 5.4L V8 330CID
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Ford Expedition 2004
  • Rear Right
  • Rear Left
  • 5.4L V8 330CID
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Ford Explorer 1996
  • Front
  • Rear
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford Explorer 1997
  • Front
  • Rear
  • 4L V6 245CID
  • X
  • Cutting and Welding Required During Installation
Ford Explorer 1998
  • Front
  • Rear
  • 4L V6 245CID
  • X
  • Cutting and Welding Required During Installation
Ford Explorer 1999
  • Front
  • Rear
  • 4L V6 245CID
  • X
  • Cutting and Welding Required During Installation
Ford Explorer 2000
  • Front
  • Rear
  • 4L V6 245CID
  • X
  • Cutting and Welding Required During Installation
Ford Explorer 2002
  • Rear
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Ford Explorer 2003
  • Rear
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Ford Explorer 2004
  • Rear
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Ford Explorer 2005
  • Rear
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Ford F-250 HD 1997
  • Rear
  • 5.8L V8 351CID
  • To 8,500lbs. Gross Vehicle Weight
  • Cutting and Welding Required During Installation
Ford F-150 1996
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford F-150 1997
  • Rear Left
  • 4.2L V6 256CID
  • Cutting and Welding Required During Installation
Ford F-150 1998
  • Rear Left
  • Rear Right
  • 4.2L V6 256CID
  • Cutting and Welding Required During Installation
Ford F-150 1999
  • Left
  • Right
  • Rear Left
  • Rear Right
  • 5.4L V8 330CID
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Ford F-150 2000
  • Rear Left
  • Rear Right
  • 5.4L V8 330CID
  • Cutting and Welding Required During Installation
Ford F-150 2001
  • Left
  • Right
  • 5.4L V8 330CID
  • Cutting and Welding Required During Installation
Ford F-150 2002
  • Rear Left
  • Rear Right
  • 5.4L V8 330CID
  • Cutting and Welding Required During Installation
Ford F-150 2003
  • Rear Left
  • Rear Right
  • 5.4L V8 330CID
  • Cutting and Welding Required During Installation
Ford F-150 2004
  • Rear Left
  • Rear Right
  • RWD
  • 5.4L V8 330CID
  • Cutting and Welding Required During Installation
Ford F-150 2005
  • Rear Left
  • Rear Right
  • RWD
  • 5.4L V8 330CID
  • Cutting and Welding Required During Installation
Ford F-150 2006
  • Rear Left
  • Rear Right
  • RWD
  • 5.4L V8 330CID
  • Cutting and Welding Required During Installation
Ford F-250 1996
  • Rear
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
  • To 8,500lbs. Gross Vehicle Weight
Ford F-250 1999
  • Rear Left
  • Rear Right
  • RWD
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Ford F-350 1996
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford Five Hundred 2005
  • Rear
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Ford Five Hundred 2006
  • Rear
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Ford Five Hundred 2007
  • Rear
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Ford Focus 2000
  • Standard
  • 2L L4 1989CC/121CID
  • 3
  • Cutting and Welding Required During Installation
Ford Focus 2001
  • Standard
  • 2L L4 1989CC/121CID
  • 3
  • Cutting and Welding Required During Installation
Ford Focus 2002
  • Standard
  • 2L L4 1989CC/121CID
  • 3
  • Cutting and Welding Required During Installation
Ford Focus 2003
  • Standard
  • 2L L4 1989CC/121CID
  • 3
  • Cutting and Welding Required During Installation
Ford Focus 2004
  • Standard
  • 2L L4 1989CC/121CID
  • 3
  • Cutting and Welding Required During Installation
Ford Freestyle 2005
  • Rear
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Ford Freestyle 2006
  • Rear
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Ford Freestyle 2007
  • Rear
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Ford Ranger 2002
  • Rear Forward
  • Rear Rearward
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Ford Ranger 2003
  • Rear
  • 4L V6 245CID
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
GMC Canyon 2007
  • Rear
  • 3.7L L5
  • 2.9L L4
  • Cutting and Welding Required During Installation
GMC Canyon 2008
  • Rear
  • 3.7L L5
  • 2.9L L4
  • Cutting and Welding Required During Installation
GMC Canyon 2009
  • Rear
  • 3.7L L5
  • 2.9L L4
  • Cutting and Welding Required During Installation
GMC Envoy 2002
  • 4.2L L6 256CID
  • Cutting and Welding Required During Installation
GMC Envoy 2003
  • 4.2L L6 256CID
  • Cutting and Welding Required During Installation
GMC Envoy 2004
  • 4.2L L6 256CID
  • Cutting and Welding Required During Installation
GMC Envoy 2005
  • 4.2L L6 256CID
  • Cutting and Welding Required During Installation
GMC Envoy 2006
  • 4.2L L6 256CID
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
GMC Envoy 2007
  • 4.2L L6 256CID
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
GMC Envoy 2008
  • SLT
  • SLE
  • 4.2L L6 256CID
  • Cutting and Welding Required During Installation
GMC Envoy 2009
  • 4.2L L6 256CID
  • Cutting and Welding Required During Installation
GMC Envoy XL 2002
  • 4.2L L6 256CID
  • Cutting and Welding Required During Installation
GMC Envoy XL 2003
  • 4.2L L6 256CID
  • Cutting and Welding Required During Installation
GMC Envoy XL 2004
  • Front Right
  • Front Left
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
GMC Envoy XL 2005
  • Front Right
  • Front Left
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
GMC Jimmy 1996
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC Jimmy 1997
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC Jimmy 1998
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC Jimmy 1999
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC Jimmy 2000
  • Rear
  • RWD
  • 4.3L V6 262CID
  • 4
  • Cutting and Welding Required During Installation
GMC Jimmy 2001
  • Rear
  • RWD
  • 4.3L V6 262CID
  • 4
  • Cutting and Welding Required During Installation
GMC Savana 1500 1996
  • Left
  • Right
  • 5.7L V8 350CID
  • To 8,500lbs. Gross Vehicle Weight
  • Cutting and Welding Required During Installation
GMC Savana 1500 1997
  • Left
  • Right
  • 5.7L V8 350CID
  • To 8,500lbs. Gross Vehicle Weight
  • Cutting and Welding Required During Installation
GMC Savana 1500 1998
  • Left
  • Right
  • 5.7L V8 350CID
  • To 8,500lbs. Gross Vehicle Weight
  • Cutting and Welding Required During Installation
GMC Savana 1500 1999
  • Left
  • Right
  • 5.7L V8 350CID
  • To 8,500lbs. Gross Vehicle Weight
  • Cutting and Welding Required During Installation
GMC Savana 1500 2000
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC Savana 1500 2001
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC Savana 1500 2002
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC Savana 1500 2003
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
GMC Savana 1500 2004
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
GMC Savana 1500 2005
  • Left
  • Right
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
GMC Savana 1500 2006
  • Left
  • Right
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
GMC Savana 2500 1996
  • Left
  • Right
  • 5.7L V8 350CID
  • To 8,500lbs. Gross Vehicle Weight
  • Cutting and Welding Required During Installation
GMC Savana 2500 1997
  • Left
  • Right
  • 5.7L V8 350CID
  • To 8,500lbs. Gross Vehicle Weight
  • Cutting and Welding Required During Installation
GMC Savana 2500 1998
  • Left
  • Right
  • 5.7L V8 350CID
  • To 8,500lbs. Gross Vehicle Weight
  • Cutting and Welding Required During Installation
GMC Savana 2500 1999
  • Left
  • Right
  • 5.7L V8 350CID
  • To 8,500lbs. Gross Vehicle Weight
  • Cutting and Welding Required During Installation
GMC Savana 2500 2000
  • Right
  • 5.7L V8 350CID
  • To 8,500lbs. Gross Vehicle Weight
  • Cutting and Welding Required During Installation
GMC Savana 2500 2003
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
GMC Savana 2500 2004
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
GMC Savana 2500 2005
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
GMC Savana 3500 2000
  • Left
  • Right
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC Sierra 1500 Classic 2007
  • Left
  • Right
  • 5.3L V8 5328CC/325CID
  • 4.8L V8 294CID
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC Sierra 1500 1999
  • Left
  • Right
  • 5.3L V8 5328CC/325CID
  • 4.3L V6 262CID
  • 4.8L V8 294CID
  • Cutting and Welding Required During Installation
GMC Sierra 1500 2000
  • Left
  • Right
  • 5.3L V8 5328CC/325CID
  • 4.3L V6 262CID
  • 4.8L V8 294CID
  • Cutting and Welding Required During Installation
GMC Sierra 1500 2001
  • Left
  • Right
  • 5.3L V8 5328CC/325CID
  • 4.3L V6 262CID
  • 4.8L V8 294CID
  • Cutting and Welding Required During Installation
GMC Sierra 1500 2002
  • Left
  • Right
  • 5.3L V8 5328CC/325CID
  • 4.3L V6 262CID
  • 4.8L V8 294CID
  • Cutting and Welding Required During Installation
GMC Sierra 1500 2003
  • Left
  • Right
  • 5.3L V8 5328CC/325CID
  • 4.3L V6 262CID
  • 4.8L V8 294CID
  • Cutting and Welding Required During Installation
GMC Sierra 1500 2004
  • Left
  • Right
  • 5.3L V8 5328CC/325CID
  • 4.3L V6 262CID
  • 4.8L V8 294CID
  • Cutting and Welding Required During Installation
GMC Sierra 1500 2005
  • Left
  • Right
  • 5.3L V8 5328CC/325CID
  • 4.3L V6 262CID
  • 4.8L V8 294CID
  • Cutting and Welding Required During Installation
GMC Sierra 1500 2006
  • Left
  • Right
  • 4.3L V6 262CID
  • 4.8L V8 294CID
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
GMC Sierra 1500 2007
  • Right
  • Left
  • 4.3L V6 262CID
  • 4.8L V8 294CID
  • 5.3L V8 5328CC/325CID
  • Federal Emissions Equipped (Tier 1)
  • Cutting and Welding Required During Installation
  • Federal Emissions Equipped
GMC Sierra 1500 2009
  • Left
  • Right
  • 4.3L V6 262CID
  • 4.8L V8 294CID
  • 5.3L V8 5328CC/325CID
  • 6L V8 5967CC/364CID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
GMC Sierra 1500 2010
  • Left
  • Right
  • 4.3L V6 262CID
  • 4.8L V8 294CID
  • 5.3L V8 5328CC/325CID
  • 6L V8 5967CC/364CID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
GMC Sierra 2500 1999
  • Left
  • Right
  • 5.3L V8 5328CC/325CID
  • 6L V8 5967CC/364CID
  • Cutting and Welding Required During Installation
GMC Sierra 2500 2000
  • Left
  • Right
  • 5.3L V8 5328CC/325CID
  • 6L V8 5967CC/364CID
  • Cutting and Welding Required During Installation
GMC Sonoma 1996
  • RWD
  • 4WD
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC Sonoma 1997
  • RWD
  • 4WD
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC Sonoma 1998
  • RWD
  • 4WD
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC Sonoma 1999
  • RWD
  • 4WD
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC Sonoma 2000
  • Automatic
  • RWD
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC Sonoma 2001
  • Automatic
  • RWD
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC Sonoma 2002
  • Automatic
  • RWD
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC Sonoma 2003
  • Automatic
  • RWD
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
GMC Yukon 2000
  • Left
  • Right
  • 5.7L V8 350CID
  • 5.3L V8 5328CC/325CID
  • 4.8L V8 294CID
  • Single Inlet Muffler
  • Cutting and Welding Required During Installation
GMC Yukon 2001
  • Left
  • Right
  • 5.3L V8 5328CC/325CID
  • 4.8L V8 294CID
  • Cutting and Welding Required During Installation
GMC Yukon 2002
  • Left
  • Right
  • 5.3L V8 5328CC/325CID
  • 6L V8 5967CC/364CID
  • 4.8L V8 294CID
  • Cutting and Welding Required During Installation
GMC Yukon 2003
  • Left
  • Right
  • 5.3L V8 5328CC/325CID
  • 6L V8 5967CC/364CID
  • 4.8L V8 294CID
  • Cutting and Welding Required During Installation
GMC Yukon 2004
  • Left
  • Right
  • 5.3L V8 5328CC/325CID
  • 6L V8 5967CC/364CID
  • 4.8L V8 294CID
  • Cutting and Welding Required During Installation
GMC Yukon 2005
  • Left
  • Right
  • 5.3L V8 5328CC/325CID
  • 6L V8 5967CC/364CID
  • 4.8L V8 294CID
  • Cutting and Welding Required During Installation
GMC Yukon 2006
  • Right
  • Left
  • 6L V8 5967CC/364CID
  • 4.8L V8 294CID
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
GMC Yukon 2007
  • Right
  • Left
  • 4.8L V8 294CID
  • 5.3L V8 5328CC/325CID
  • 6.2L V8 6162CC/376CID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
GMC Yukon 2008
  • Right
  • Left
  • 4.8L V8 294CID
  • 5.3L V8 5328CC/325CID
  • 6.2L V8 6162CC/376CID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
GMC Yukon 2009
  • Left
  • Right
  • 4.8L V8 294CID
  • 5.3L V8 5328CC/325CID
  • 6.2L V8 6162CC/376CID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
GMC Yukon 2010
  • Right
  • Left
  • 5.3L V8 5328CC/325CID
  • 6L V8 5967CC/364CID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
GMC Yukon 2012
  • Right
  • Left
  • 5.3L V8 5328CC/325CID
  • 6L V8 5967CC/364CID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
GMC Yukon 2013
  • Right
  • Left
  • 5.3L V8 5328CC/325CID
  • 6L V8 5967CC/364CID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
GMC Yukon XL 1500 2000
  • Left
  • Right
  • RWD
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
GMC Yukon XL 1500 2001
  • Left
  • Right
  • RWD
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
GMC Yukon XL 1500 2002
  • Left
  • Right
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
GMC Yukon XL 1500 2004
  • Left
  • Right
  • RWD
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
GMC Yukon XL 1500 2005
  • Left
  • Right
  • RWD
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
GMC Yukon XL 1500 2006
  • Left
  • Right
  • RWD
  • 5.3L V8 5328CC/325CID
  • Cutting and Welding Required During Installation
GMC Yukon XL 1500 2009
  • Left
  • Right
  • 5.3L V8 5328CC/325CID
  • 6L V8 5967CC/364CID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
GMC Yukon XL 1500 2010
  • Left
  • Right
  • 5.3L V8 5328CC/325CID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
GMC Yukon XL 1500 2011
  • Right
  • Left
  • 5.3L V8 5328CC/325CID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
GMC Yukon XL 1500 2012
  • Right
  • Left
  • 5.3L V8 5328CC/325CID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
GMC Yukon XL 1500 2013
  • Right
  • Left
  • 5.3L V8 5328CC/325CID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
GMC Yukon XL 2500 2000
  • Left
  • 6L V8 5967CC/364CID
  • Cutting and Welding Required During Installation
Honda Passport 1996
  • Standard
  • 3.2L V6 3165CC
  • Cutting and Welding Required During Installation
Honda Passport 1997
  • Standard
  • 3.2L V6 3165CC
  • Cutting and Welding Required During Installation
Hummer H2 2003
  • Right
  • Left
  • 6L V8 5967CC/364CID
  • Cutting and Welding Required During Installation
Hummer H2 2004
  • Right
  • Left
  • 6L V8 5967CC/364CID
  • Cutting and Welding Required During Installation
Hummer H2 2005
  • Right
  • Left
  • 6L V8 5967CC/364CID
  • Cutting and Welding Required During Installation
Hummer H2 2006
  • Right
  • Left
  • 6L V8 5967CC/364CID
  • Cutting and Welding Required During Installation
Hummer H3 2006
  • Rear
  • 3.5L L5 3460CC/211CID
  • Cutting and Welding Required During Installation
Isuzu Ascender 2004
  • 4.2L L6 256CID
  • Cutting and Welding Required During Installation
Isuzu Ascender 2005
  • 4.2L L6 256CID
  • Cutting and Welding Required During Installation
Isuzu Ascender 2006
  • 4.2L L6 256CID
  • Cutting and Welding Required During Installation
Isuzu Ascender 2007
  • 4.2L L6 256CID
  • Cutting and Welding Required During Installation
Isuzu Ascender 2008
  • 4.2L L6 256CID
  • Cutting and Welding Required During Installation
Isuzu Hombre 1997
  • 4.3L V6 4294CC
  • Cutting and Welding Required During Installation
Isuzu Hombre 1998
  • 4.3L V6 4294CC
  • Cutting and Welding Required During Installation
Isuzu Hombre 1999
  • 4.3L V6 4294CC
  • Cutting and Welding Required During Installation
Isuzu Hombre 2000
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Isuzu i-280 2006
  • Rear
  • 2.8L L4 2770CC/169CID
  • Cutting and Welding Required During Installation
Isuzu i-290 2007
  • Rear
  • 2.9L L4
  • Cutting and Welding Required During Installation
Isuzu i-290 2008
  • Rear
  • 2.9L L4
  • Cutting and Welding Required During Installation
Isuzu i-350 2006
  • Rear
  • 3.5L L5 3460CC/211CID
  • Cutting and Welding Required During Installation
Isuzu i-370 2007
  • Rear
  • 3.7L L5
  • Cutting and Welding Required During Installation
Isuzu i-370 2008
  • Rear
  • 3.7L L5
  • Cutting and Welding Required During Installation
Isuzu Rodeo 1996
  • Rear
  • Standard
  • 2.6L L4 2559CC
  • 3.2L V6 3165CC
  • Cutting and Welding Required During Installation
Isuzu Rodeo 1997
  • Rear
  • Standard
  • 2.6L L4 2559CC
  • 3.2L V6 3165CC
  • Cutting and Welding Required During Installation
Isuzu Trooper 1996
  • Standard
  • 3.2L V6 3165CC
  • Cutting and Welding Required During Installation
Isuzu Trooper 1997
  • Standard
  • 3.2L V6 3165CC
  • Cutting and Welding Required During Installation
Isuzu Trooper 1998
  • Standard
  • 3.5L V6 3475CC
  • Cutting and Welding Required During Installation
Isuzu Trooper 1999
  • Standard
  • 3.5L V6 3475CC
  • Cutting and Welding Required During Installation
Jeep Cherokee 1996
  • 4L L6 242CID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
Jeep Cherokee 1997
  • 4L L6 242CID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
Jeep Cherokee 1998
  • 4L L6 242CID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
Jeep Cherokee 1999
  • 4L L6 242CID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
Jeep Cherokee 2000
  • Rear
  • 4L L6 242CID
  • Cutting and Welding Required During Installation
  • Split Date From: From 01/20/2000
Jeep Grand Cherokee 1996
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Jeep Grand Cherokee 1997
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Jeep Grand Cherokee 1998
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Jeep Grand Cherokee 1999
  • Rear
  • 4.7L V8 287CID
  • 4L L6 242CID
  • Cutting and Welding Required During Installation
Jeep Grand Cherokee 2000
  • Rear
  • 4.7L V8 287CID
  • 4L L6 242CID
  • Cutting and Welding Required During Installation
Jeep Grand Cherokee 2001
  • Rear
  • 4.7L V8 287CID
  • 4L L6 242CID
  • Cutting and Welding Required During Installation
Jeep Wrangler 2000
  • Rear
  • 4L L6 242CID
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep Wrangler 2001
  • Rear
  • 4L L6 242CID
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep Wrangler 2002
  • Rear
  • 4L L6 242CID
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep Wrangler 2003
  • Rear
  • 4L L6 242CID
  • 2.4L L4 148CID
  • Cutting and Welding Required During Installation
Jeep Wrangler 2004
  • 2.4L L4 148CID
  • Cutting and Welding Required During Installation
Kia Sorento 2003
  • Rear
  • 3.5L V6 3497CC
  • Cutting and Welding Required During Installation
Kia Sorento 2004
  • Rear
  • 3.5L V6 3497CC
  • Cutting and Welding Required During Installation
Kia Sorento 2005
  • Rear
  • 3.5L V6 3497CC
  • Cutting and Welding Required During Installation
Kia Sorento 2006
  • Rear
  • 3.5L V6 3497CC
  • Cutting and Welding Required During Installation
Lexus GS300 1996
  • Front
  • 3L L6 2997CC
  • Cutting and Welding Required During Installation
Lexus GS300 1997
  • Front
  • 3L L6 2997CC
  • Cutting and Welding Required During Installation
Lexus GS300 2000
  • 3L L6 2997CC
  • Cutting and Welding Required During Installation
Lexus GS300 2001
  • 3L L6 2997CC
  • Cutting and Welding Required During Installation
Lexus GS300 2002
  • 3L L6 2997CC
  • Cutting and Welding Required During Installation
Lexus GS300 2003
  • 3L L6 2997CC
  • Cutting and Welding Required During Installation
Lexus GS300 2004
  • 3L L6 2997CC
  • Cutting and Welding Required During Installation
Lexus GS300 2005
  • 3L L6 2997CC
  • Cutting and Welding Required During Installation
Lexus GS430 2001
  • Rear
  • 4.3L V8 4293CC
  • Cutting and Welding Required During Installation
Lexus GS430 2002
  • Rear
  • 4.3L V8 4293CC
  • Cutting and Welding Required During Installation
Lexus GS430 2003
  • Rear
  • 4.3L V8 4293CC
  • Cutting and Welding Required During Installation
Lexus GS430 2004
  • Rear
  • 4.3L V8 4293CC
  • Cutting and Welding Required During Installation
Lexus GS430 2005
  • Rear
  • 4.3L V8 4293CC
  • Cutting and Welding Required During Installation
Lexus GS430 2006
  • Rear
  • 4.3L V8 4293CC
  • Cutting and Welding Required During Installation
Lexus GS430 2007
  • Rear
  • 4.3L V8 4293CC
  • Cutting and Welding Required During Installation
Lexus IS300 2001
  • Rear
  • 3L L6 2997CC
  • Cutting and Welding Required During Installation
Lexus IS300 2002
  • Rear
  • 3L L6 2997CC
  • Cutting and Welding Required During Installation
Lexus IS300 2003
  • Rear
  • 3L L6 2997CC
  • Cutting and Welding Required During Installation
Lexus IS300 2004
  • Rear
  • 3L L6 2997CC
  • Cutting and Welding Required During Installation
Lexus IS300 2005
  • Rear
  • 3L L6 2997CC
  • Cutting and Welding Required During Installation
Lexus LS430 2001
  • Rear
  • 4.3L V8 4293CC
  • Cutting and Welding Required During Installation
Lexus LS430 2002
  • Rear
  • 4.3L V8 4293CC
  • Cutting and Welding Required During Installation
Lexus LS430 2003
  • Rear
  • 4.3L V8 4293CC
  • Cutting and Welding Required During Installation
Lexus LS430 2004
  • Rear
  • 4.3L V8 4293CC
  • Cutting and Welding Required During Installation
Lexus LS430 2005
  • Rear
  • 4.3L V8 4293CC
  • Cutting and Welding Required During Installation
Lexus LS430 2006
  • Rear
  • 4.3L V8 4293CC
  • Cutting and Welding Required During Installation
Lexus LX450 1996
  • Front
  • Rear
  • 4.5L L6 4477CC
  • Cutting and Welding Required During Installation
Lexus LX450 1997
  • Front
  • Rear
  • 4.5L L6 4477CC
  • Cutting and Welding Required During Installation
Lexus RX300 1999
  • Rear
  • 3L V6 2995CC
  • Cutting and Welding Required During Installation
Lexus RX300 2000
  • Rear
  • 3L V6 2995CC
  • Cutting and Welding Required During Installation
Lexus RX300 2001
  • Rear
  • 3L V6 2995CC
  • Cutting and Welding Required During Installation
Lexus RX300 2002
  • Rear
  • 3L V6 2995CC
  • Cutting and Welding Required During Installation
Lexus RX300 2003
  • Rear
  • 3L V6 2995CC
  • Cutting and Welding Required During Installation
Lexus SC300 1992
  • Front
  • 3L L6 2997CC
  • Cutting and Welding Required During Installation
Lexus SC300 1993
  • Front
  • 3L L6 2997CC
  • Cutting and Welding Required During Installation
Lexus SC300 1994
  • Front
  • 3L L6 2997CC
  • Cutting and Welding Required During Installation
Lexus SC300 1995
  • Front
  • 3L L6 2997CC
  • Cutting and Welding Required During Installation
Lexus SC300 1996
  • Front
  • 3L L6 2997CC
  • Cutting and Welding Required During Installation
Lexus SC300 1997
  • Front
  • 3L L6 2997CC
  • Cutting and Welding Required During Installation
Lexus SC300 1998
  • Front
  • 3L L6 2997CC
  • Cutting and Welding Required During Installation
Lexus SC430 2002
  • Rear
  • 4.3L V8 4293CC
  • Cutting and Welding Required During Installation
Lexus SC430 2003
  • Rear
  • 4.3L V8 4293CC
  • Cutting and Welding Required During Installation
Lexus SC430 2004
  • Rear
  • 4.3L V8 4293CC
  • Cutting and Welding Required During Installation
Lexus SC430 2005
  • Rear
  • 4.3L V8 4293CC
  • Cutting and Welding Required During Installation
Lexus SC430 2006
  • Rear
  • 4.3L V8 4293CC
  • Cutting and Welding Required During Installation
Lexus SC430 2007
  • Rear
  • 4.3L V8 4293CC
  • Cutting and Welding Required During Installation
Lexus SC430 2008
  • Rear
  • 4.3L V8 4293CC
  • Cutting and Welding Required During Installation
Lexus SC430 2009
  • Rear
  • 4.3L V8 4293CC
  • Cutting and Welding Required During Installation
Lexus SC430 2010
  • Rear
  • 4.3L V8 4293CC
  • Cutting and Welding Required During Installation
Lincoln Aviator 2003
  • Rear
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Lincoln Aviator 2004
  • Rear
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Lincoln Aviator 2005
  • Rear
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Lincoln Blackwood 2002
  • Right
  • Left
  • 5.4L V8 330CID
  • Cutting and Welding Required During Installation
Lincoln Navigator 1998
  • Rear Left
  • 5.4L V8 330CID
  • Cutting and Welding Required During Installation
Lincoln Navigator 1999
  • Right
  • Left
  • 5.4L V8 330CID
  • Cutting and Welding Required During Installation
Lincoln Navigator 2000
  • Right
  • Left
  • 5.4L V8 330CID
  • Cutting and Welding Required During Installation
Lincoln Navigator 2001
  • Rear Right
  • Rear Left
  • 5.4L V8 330CID
  • Cutting and Welding Required During Installation
Lincoln Navigator 2002
  • Right
  • Left
  • 5.4L V8 330CID
  • Cutting and Welding Required During Installation
Lincoln Navigator 2003
  • Rear
  • 5.4L V8 330CID
  • Cutting and Welding Required During Installation
Lincoln Navigator 2004
  • Rear
  • 5.4L V8 330CID
  • Cutting and Welding Required During Installation
Mazda B3000 1995
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Mazda B3000 1996
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Mazda B3000 1998
  • Rear
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Mazda B3000 1999
  • Rear
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Mazda B3000 2000
  • Rear
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Mazda B3000 2001
  • Rear Forward
  • Rear Rearward
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Mazda B3000 2002
  • Rear Forward
  • Rear Rearward
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Mazda B3000 2003
  • Rear
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Mazda B4000 1995
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Mazda B4000 1996
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Mazda B4000 1997
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Mazda B4000 2001
  • Rear
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Mazda B4000 2002
  • Rear
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Mazda B4000 2003
  • Rear
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Mercury Montego 2005
  • Rear
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Mercury Montego 2006
  • Rear
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Mercury Montego 2007
  • Rear
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Mercury Mountaineer 2002
  • Rear
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Mercury Mountaineer 2003
  • Rear
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Mercury Mountaineer 2004
  • Rear
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Mercury Mountaineer 2005
  • Rear
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Mitsubishi Montero 2001
  • Rear
  • 3.5L V6 3497CC/215CID
  • Cutting and Welding Required During Installation
Mitsubishi Montero 2002
  • Rear
  • 3.5L V6 3497CC/215CID
  • Cutting and Welding Required During Installation
Mitsubishi Montero Sport 2000
  • Rear
  • 3.5L V6 3497CC/215CID
  • 3L V6 2972CC/181CID
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Mitsubishi Montero Sport 2001
  • Rear
  • 3L V6 2972CC/181CID
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Nissan Frontier 1998
  • 2.4L L4 2389CC
  • Cutting and Welding Required During Installation
Nissan Frontier 1999
  • 2.4L L4 2389CC
  • Cutting and Welding Required During Installation
Nissan Frontier 2000
  • 2.4L L4 2389CC
  • Cutting and Welding Required During Installation
Nissan Frontier 2001
  • Rear
  • 2.4L L4 2389CC
  • Cutting and Welding Required During Installation
Nissan Frontier 2002
  • Rear
  • 2.4L L4 2389CC
  • Cutting and Welding Required During Installation
Nissan Frontier 2003
  • Rear
  • 2.4L L4 2389CC
  • Cutting and Welding Required During Installation
Nissan Frontier 2004
  • Rear
  • 2.4L L4 2389CC
  • Cutting and Welding Required During Installation
Nissan Titan 2004
  • Right
  • Left
  • 5.6L V8 5552CC
  • Cutting and Welding Required During Installation
Nissan Titan 2005
  • Right
  • Left
  • 5.6L V8 5552CC
  • Cutting and Welding Required During Installation
Nissan Titan 2006
  • Right
  • Left
  • 5.6L V8 5552CC
  • Cutting and Welding Required During Installation
Nissan Titan 2007
  • Left
  • Right
  • 5.6L V8 5552CC
  • Cutting and Welding Required During Installation
Nissan Titan 2008
  • Left
  • Right
  • 5.6L V8 5552CC
  • Cutting and Welding Required During Installation
Nissan Titan 2009
  • Left
  • Right
  • 5.6L V8 5552CC
  • Cutting and Welding Required During Installation
Nissan Titan 2010
  • Left
  • Right
  • 5.6L V8 5552CC
  • Cutting and Welding Required During Installation
Nissan Xterra 2000
  • 2.4L L4 2389CC
  • Cutting and Welding Required During Installation
Nissan Xterra 2001
  • Rear
  • 2.4L L4 2389CC
  • Cutting and Welding Required During Installation
Nissan Xterra 2002
  • Rear
  • 2.4L L4 2389CC
  • Cutting and Welding Required During Installation
Nissan Xterra 2003
  • Rear
  • 2.4L L4 2389CC
  • Cutting and Welding Required During Installation
Nissan Xterra 2004
  • Rear
  • 2.4L L4 2389CC
  • Cutting and Welding Required During Installation
Oldsmobile Aurora 1996
  • 4L V8 244CID
  • Cutting and Welding Required During Installation
Oldsmobile Aurora 1997
  • 4L V8 244CID
  • Cutting and Welding Required During Installation
Oldsmobile Aurora 1998
  • 4L V8 244CID
  • Cutting and Welding Required During Installation
Oldsmobile Aurora 1999
  • 4L V8 244CID
  • Cutting and Welding Required During Installation
Oldsmobile Bravada 1996
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Oldsmobile Bravada 1997
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Oldsmobile Bravada 1998
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Oldsmobile Bravada 1999
  • 4.3L V6 262CID
  • Cutting and Welding Required During Installation
Oldsmobile Bravada 2002
  • 4.2L L6 256CID
  • Cutting and Welding Required During Installation
Oldsmobile Bravada 2003
  • 4.2L L6 256CID
  • Cutting and Welding Required During Installation
Oldsmobile Bravada 2004
  • 4.2L L6 256CID
  • Cutting and Welding Required During Installation
Plymouth Neon 1996
  • 2L L4 1996CC/122CID
  • Cutting and Welding Required During Installation
Plymouth Neon 1997
  • 2L L4 1996CC/122CID
  • Cutting and Welding Required During Installation
Plymouth Neon 1998
  • 2L L4 1996CC/122CID
  • Cutting and Welding Required During Installation
Plymouth Neon 1999
  • 2L L4 1996CC/122CID
  • Cutting and Welding Required During Installation
Toyota 4Runner 1996
  • 3.4L V6 3378CC
  • Cutting and Welding Required During Installation
Toyota 4Runner 1997
  • 3.4L V6 3378CC
  • Cutting and Welding Required During Installation
Toyota 4Runner 1998
  • 3.4L V6 3378CC
  • Cutting and Welding Required During Installation
Toyota 4Runner 1999
  • Rear
  • 3.4L V6 3378CC
  • Cutting and Welding Required During Installation
Toyota 4Runner 2000
  • Rear
  • 3.4L V6 3378CC
  • Cutting and Welding Required During Installation
Toyota 4Runner 2001
  • Rear
  • 3.4L V6 3378CC
  • Cutting and Welding Required During Installation
Toyota 4Runner 2002
  • Rear
  • 3.4L V6 3378CC
  • Cutting and Welding Required During Installation
Toyota Highlander 2001
  • Rear
  • 3L V6 2995CC
  • Cutting and Welding Required During Installation
Toyota Highlander 2002
  • Rear
  • 3L V6 2995CC
  • Cutting and Welding Required During Installation
Toyota Highlander 2003
  • Rear
  • 3L V6 2995CC
  • Cutting and Welding Required During Installation
Toyota Land Cruiser 1995
  • Front
  • Rear
  • 4.5L L6 4477CC
  • Cutting and Welding Required During Installation
Toyota Land Cruiser 1996
  • Front
  • Rear
  • 4.5L L6 4477CC
  • Cutting and Welding Required During Installation
Toyota Land Cruiser 1997
  • Front
  • Rear
  • 4.5L L6 4477CC
  • Cutting and Welding Required During Installation
Toyota Tundra 2007
  • Front Left
  • Rear Left
  • Front Right
  • Rear Right
  • 5.7L V8 5663CC/345CID
  • Cutting and Welding Required During Installation
Volkswagen GTI 2006
  • Rear
  • 2L L4 1984CC/121CID
  • Cutting and Welding Required During Installation
Volkswagen GTI 2007
  • 2L L4 1984CC/121CID
  • Cutting and Welding Required During Installation
Volkswagen GTI 2008
  • 2L L4 1984CC/121CID
  • Cutting and Welding Required During Installation
Volkswagen Jetta 2006
  • 2L L4 1984CC/121CID
  • Cutting and Welding Required During Installation
Volkswagen Jetta 2007
  • 2L L4 1984CC/121CID
  • Cutting and Welding Required During Installation
Volvo 850 1996
  • 2.3L L5 2319CC
  • Cutting and Welding Required During Installation
Volvo 850 1997
  • 2.3L L5 2319CC
  • Cutting and Welding Required During Installation