Canada Post's strikeCanada Post resumed its operationsNo unusual delay in transit expected
100% CANADIAN BASED 100% CANADIAN
NO DUTIES OR CUSTOMS FEES NO CUSTOMS FEES
AUTHORIZED DEALER AUTH. DEALER
30-DAY HASSLE-FREE RETURNS 30-DAY RETURNS

MagnaFlowStainless Federal Heavy Metal Catalytic Converter without Sensor Port (2" IN\/2" OUT)

AUTHORIZED DEALER

99004HM

Manufacturer Part Number
*Images are for illustrative purpose only. Actual Product may differ.
SKU: MAG-99004HM
Please select a vehicle to verify fitment.

Please Select a Vehicle

This will be used to show you compatible parts.

Auto Parts Finder

This product doesn't fit your selection!

The product shown on this page is not compatible with the selected vehicle

!
To ensure proper parts fitment, please browse compatible products or change your selection.


Change Current Selection
FREE Shipping*
Standard Warranty

Special Order
1-3 Weeks
CA $304.00
Stainless Federal Heavy Metal Catalytic Converter without Sensor Port (2" IN\/2" OUT) is available to buy in increments of 1
AUTHORIZED DEALER

99004HM

Manufacturer Part Number
More Information
Manufacturer MagnaFlow
Manufacturer Part Number 99004HM
Manufacturer's Suggested Retail Price (MSRP) 168.96
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
This table represents all the 422 compatible vehicles for this part:
Make Model Year
Application Notes
Position Transmission Drive Type Engine Aspiration Additional Information
BMW M6 1987
  • 3.5L L6 3453CC
  • Cutting and Welding Required During Installation
Buick Century 1996
  • 2.2L L4 2190CC/134CID
  • Cutting and Welding Required During Installation
Cadillac Escalade 1999
  • 5.7L V8 350CID
  • Dual Inlet Muffler
  • Cutting and Welding Required During Installation
Cadillac Escalade 2000
  • 5.7L V8 350CID
  • Dual Inlet Muffler
  • Cutting and Welding Required During Installation
Chevrolet C1500 Suburban 1996
  • 5.7L V8 350CID
  • Single Inlet Muffler
  • Cutting and Welding Required During Installation
Chevrolet C1500 Suburban 1997
  • 5.7L V8 350CID
  • Single Inlet Muffler
  • Cutting and Welding Required During Installation
Chevrolet C1500 Suburban 1998
  • 5.7L V8 350CID
  • Single Inlet Muffler
  • Cutting and Welding Required During Installation
Chevrolet C1500 Suburban 1999
  • 5.7L V8 350CID
  • Single Inlet Muffler
  • Cutting and Welding Required During Installation
Chevrolet C2500 Suburban 1996
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet C2500 Suburban 1997
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet C2500 Suburban 1998
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet C2500 Suburban 1999
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet C1500 1996
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet C1500 1997
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet C1500 1998
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet C1500 1999
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet C2500 1996
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet C2500 1997
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet C2500 1998
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet C2500 1999
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet C2500 2000
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet C3500 1996
  • Front
  • Rear
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
  • 8,501lbs. To 15,000lbs. Gross Vehicle Weight
Chevrolet C3500 1997
  • Front
  • Rear
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
  • 8,501lbs. To 15,000lbs. Gross Vehicle Weight
Chevrolet C3500 1998
  • Front
  • Rear
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
  • 8,501lbs. To 15,000lbs. Gross Vehicle Weight
Chevrolet C3500 1999
  • Front
  • Rear
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
  • 8,501lbs. To 15,000lbs. Gross Vehicle Weight
Chevrolet C3500 2000
  • Front
  • Rear
  • 5.7L V8 350CID
  • To 8,500lbs. Gross Vehicle Weight
  • Cutting and Welding Required During Installation
  • 8,501lbs. To 15,000lbs. Gross Vehicle Weight
Chevrolet K1500 Suburban 1996
  • 5.7L V8 350CID
  • Single Inlet Muffler
  • Cutting and Welding Required During Installation
Chevrolet K1500 Suburban 1997
  • 5.7L V8 350CID
  • Single Inlet Muffler
  • Cutting and Welding Required During Installation
Chevrolet K1500 Suburban 1998
  • 5.7L V8 350CID
  • Single Inlet Muffler
  • Cutting and Welding Required During Installation
Chevrolet K1500 Suburban 1999
  • 5.7L V8 350CID
  • Single Inlet Muffler
  • Cutting and Welding Required During Installation
Chevrolet K2500 Suburban 1996
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet K2500 Suburban 1997
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet K2500 Suburban 1998
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet K2500 Suburban 1999
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet K1500 1996
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet K1500 1997
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet K1500 1998
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet K1500 1999
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet K2500 1996
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet K2500 1997
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet K2500 1998
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet K2500 1999
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet K2500 2000
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Chevrolet K3500 1996
  • Front
  • Rear
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
  • 8,501lbs. To 15,000lbs. Gross Vehicle Weight
Chevrolet K3500 1997
  • Front
  • Rear
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
  • 8,501lbs. To 15,000lbs. Gross Vehicle Weight
Chevrolet K3500 1998
  • Front
  • Rear
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
  • 8,501lbs. To 15,000lbs. Gross Vehicle Weight
Chevrolet K3500 1999
  • Front
  • Rear
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
  • 8,501lbs. To 15,000lbs. Gross Vehicle Weight
Chevrolet K3500 2000
  • Front
  • Rear
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
  • 8,501lbs. To 15,000lbs. Gross Vehicle Weight
Chevrolet Metro 1998
  • Rear
  • 1.3L L4 1295CC/79cCID
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Chevrolet Metro 1999
  • Rear
  • 1.3L L4 1295CC/79cCID
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Chevrolet Metro 2000
  • Rear
  • 1.3L L4 1295CC/79cCID
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Chevrolet Metro 2001
  • Rear
  • 1.3L L4 1295CC/79cCID
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Chevrolet Tahoe 1996
  • 5.7L V8 350CID
  • 4
  • Single Inlet Muffler
  • Cutting and Welding Required During Installation
  • Dual Inlet Muffler
Chevrolet Tahoe 1997
  • 5.7L V8 350CID
  • 4
  • Single Inlet Muffler
  • Cutting and Welding Required During Installation
  • Dual Inlet Muffler
Chevrolet Tahoe 1998
  • 5.7L V8 350CID
  • 4
  • Single Inlet Muffler
  • Cutting and Welding Required During Installation
  • Dual Inlet Muffler
Chevrolet Tahoe 1999
  • 5.7L V8 350CID
  • 4
  • Single Inlet Muffler
  • Cutting and Welding Required During Installation
  • Dual Inlet Muffler
Chevrolet Tahoe 2000
  • 5.7L V8 350CID
  • Single Inlet Muffler
  • Cutting and Welding Required During Installation
  • Dual Inlet Muffler
Chrysler Sebring 1995
  • Front
  • 2.5L V6 2497CC/152CID
  • Cutting and Welding Required During Installation
Chrysler Sebring 1996
  • Front
  • 2.5L V6 2497CC/152CID
  • 2L L4 1996CC/122CID
  • Cutting and Welding Required During Installation
Chrysler Sebring 1997
  • 2L L4 1996CC/122CID
  • Cutting and Welding Required During Installation
Chrysler Sebring 1998
  • 2L L4 1996CC/122CID
  • Cutting and Welding Required During Installation
Chrysler Sebring 1999
  • 2L L4 1996CC/122CID
  • Cutting and Welding Required During Installation
Daewoo Lanos 1999
  • Rear
  • 1.6L L4 1588CC/98cCID
  • Cutting and Welding Required During Installation
Daewoo Lanos 2000
  • Rear
  • 1.6L L4 1588CC/98cCID
  • Cutting and Welding Required During Installation
Daewoo Lanos 2001
  • Rear
  • 1.6L L4 1588CC/98cCID
  • Cutting and Welding Required During Installation
Daewoo Lanos 2002
  • Rear
  • 1.6L L4 1588CC/98cCID
  • Cutting and Welding Required During Installation
Daewoo Nubira 1999
  • Rear
  • Automatic
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Daewoo Nubira 2000
  • Rear
  • Automatic
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Daewoo Nubira 2001
  • Rear
  • Automatic
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Daewoo Nubira 2002
  • Rear
  • Automatic
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Dodge Avenger 1995
  • 2L L4 1996CC/122CID
  • Cutting and Welding Required During Installation
Dodge Avenger 1996
  • 2L L4 1996CC/122CID
  • Cutting and Welding Required During Installation
Dodge Avenger 1997
  • 2L L4 1996CC/122CID
  • Cutting and Welding Required During Installation
Dodge Avenger 1998
  • 2L L4 1996CC/122CID
  • Cutting and Welding Required During Installation
Dodge Avenger 1999
  • 2L L4 1996CC/122CID
  • Cutting and Welding Required During Installation
Dodge Dakota 1999
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Dodge Dakota 2000
  • RWD
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Dodge Dakota 2001
  • RWD
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Dodge Dakota 2002
  • RWD
  • 2.5L L4 2507CC/153CID
  • Cutting and Welding Required During Installation
Dodge Ram 1500 Pickup 2002
  • RWD
  • 4.7L V8 287CID
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Dodge Ram 1500 Pickup 2003
  • RWD
  • 4.7L V8 287CID
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Ford Aerostar 1996
  • Front
  • Rear
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Ford Aerostar 1997
  • Front
  • Rear
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Ford Aspire 1996
  • 1.3L L4 1295CC
  • Cutting and Welding Required During Installation
Ford Aspire 1997
  • 1.3L L4 1295CC
  • Cutting and Welding Required During Installation
Ford Contour 1996
  • Rear
  • Automatic
  • 2.5L V6 2450CC/155CID
  • Cutting and Welding Required During Installation
Ford Contour 1997
  • Rear
  • Automatic
  • 2.5L V6 2450CC/155CID
  • Cutting and Welding Required During Installation
Ford Crown Victoria 2003
  • Rear Left
  • Rear Right
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Ford Crown Victoria 2004
  • Rear Left
  • Rear Right
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Ford Crown Victoria 2005
  • Rear Left
  • Rear Right
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Ford Crown Victoria 2006
  • Rear Left
  • Rear Right
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Ford Crown Victoria 2007
  • Rear Left
  • Rear Right
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Ford Escape 2001
  • Rear
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Ford Escape 2002
  • Rear
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Ford Escape 2003
  • Rear
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Ford Escape 2004
  • Rear
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Ford Escort 1996
  • 1.8L L4 112CID
  • Cutting and Welding Required During Installation
Ford Escort 1998
  • 2L L4 1989CC/121CID
  • P
  • Cutting and Welding Required During Installation
Ford Escort 1999
  • 2L L4 1989CC/121CID
  • P
  • Cutting and Welding Required During Installation
Ford Escort 2000
  • 2L L4 1989CC/121CID
  • P
  • Cutting and Welding Required During Installation
Ford Escort 2001
  • 2L L4 1989CC/121CID
  • P
  • Cutting and Welding Required During Installation
Ford Five Hundred 2005
  • Center
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Ford Five Hundred 2006
  • Center
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Ford Five Hundred 2007
  • Center
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Ford Focus 2000
  • 2L L4 1989CC/121CID
  • P
  • Cutting and Welding Required During Installation
Ford Focus 2001
  • 2L L4 1989CC/121CID
  • P
  • Cutting and Welding Required During Installation
Ford Focus 2002
  • 2L L4 1989CC/121CID
  • P
  • Cutting and Welding Required During Installation
Ford Focus 2003
  • 2L L4 1989CC/121CID
  • P
  • Cutting and Welding Required During Installation
Ford Focus 2004
  • 2L L4 1989CC/121CID
  • P
  • Cutting and Welding Required During Installation
Ford Freestyle 2005
  • Front
  • Center
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Ford Freestyle 2006
  • Front
  • Center
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Ford Freestyle 2007
  • Front
  • Center
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Ford Mustang 1996
  • Left
  • Right
  • Rear Left
  • Rear Right
  • 3.8L V6 232CID
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Ford Mustang 1997
  • Left
  • Right
  • Rear Left
  • Rear Right
  • 3.8L V6 232CID
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Ford Mustang 1998
  • Left
  • Right
  • Rear Left
  • Rear Right
  • 3.8L V6 232CID
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Ford Taurus 1996
  • Front
  • 3L V6 2986CC/182CID
  • U
  • Cutting and Welding Required During Installation
Ford Taurus 1997
  • Front
  • 3L V6 2986CC/182CID
  • U
  • Cutting and Welding Required During Installation
Ford Taurus 1998
  • Front
  • 3L V6 2986CC/182CID
  • U
  • Cutting and Welding Required During Installation
Ford Taurus 1999
  • Front
  • 3L V6 2986CC/182CID
  • U
  • Cutting and Welding Required During Installation
Ford Windstar 1995
  • Right
  • Left
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Ford Windstar 1996
  • Right
  • Left
  • 3.8L V6 232CID
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Ford Windstar 1997
  • Right
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Ford Windstar 1998
  • Left
  • Right
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Ford Windstar 1999
  • Left
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Ford Windstar 2000
  • Left
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Geo Metro 1995
  • Front
  • 1.3L L4 1295CC/79cCID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
Geo Metro 1996
  • Rear
  • Front
  • 1L L3 993CC/61cCID
  • 1.3L L4 1295CC/79cCID
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
  • Federal Emissions Equipped
Geo Metro 1997
  • Rear
  • Front
  • 1L L3 993CC/61cCID
  • 1.3L L4 1295CC/79cCID
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
  • Federal Emissions Equipped
GMC C1500 Suburban 1996
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC C1500 Suburban 1997
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC C1500 Suburban 1998
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC C1500 Suburban 1999
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC C2500 Suburban 1996
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC C2500 Suburban 1997
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC C2500 Suburban 1998
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC C2500 Suburban 1999
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC C1500 1996
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC C1500 1997
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC C1500 1998
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC C1500 1999
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC C2500 1996
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC C2500 1997
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC C2500 1998
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC C2500 1999
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC C2500 2000
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC C3500 1996
  • Left
  • Front Left
  • Rear Left
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
  • 8,501lbs. To 15,000lbs. Gross Vehicle Weight
GMC C3500 1997
  • Rear
  • Front Left
  • Front Right
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
  • 8,501lbs. To 15,000lbs. Gross Vehicle Weight
GMC C3500 1998
  • Rear
  • Front Left
  • Front Right
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
  • 8,501lbs. To 15,000lbs. Gross Vehicle Weight
GMC C3500 1999
  • Rear
  • Front Left
  • Front Right
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
  • 8,501lbs. To 15,000lbs. Gross Vehicle Weight
GMC C3500 2000
  • Rear
  • Front Left
  • Front Right
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
  • 8,501lbs. To 15,000lbs. Gross Vehicle Weight
GMC K1500 Suburban 1996
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
  • Single Inlet Muffler
GMC K1500 Suburban 1997
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
  • Single Inlet Muffler
GMC K1500 Suburban 1998
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
  • Single Inlet Muffler
GMC K1500 Suburban 1999
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC K2500 Suburban 1996
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC K2500 Suburban 1997
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC K2500 Suburban 1998
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC K2500 Suburban 1999
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC K1500 1996
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC K1500 1997
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC K1500 1998
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC K1500 1999
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC K2500 1996
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC K2500 1997
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC K2500 1998
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC K2500 1999
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC K2500 2000
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC K3500 1996
  • Left
  • Front Left
  • Rear Left
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
  • 8,501lbs. To 15,000lbs. Gross Vehicle Weight
GMC K3500 1997
  • Left
  • Front Left
  • Rear Left
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
  • 8,501lbs. To 15,000lbs. Gross Vehicle Weight
GMC K3500 1998
  • Left
  • Front Left
  • Rear Left
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
  • 8,501lbs. To 15,000lbs. Gross Vehicle Weight
GMC K3500 1999
  • Left
  • Front Left
  • Rear Left
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
  • 8,501lbs. To 15,000lbs. Gross Vehicle Weight
GMC K3500 2000
  • Left
  • Front Left
  • Rear Left
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
  • 8,501lbs. To 15,000lbs. Gross Vehicle Weight
GMC Yukon 1996
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC Yukon 1997
  • 5.7L V8 350CID
  • Single Inlet Muffler
  • Cutting and Welding Required During Installation
GMC Yukon 1998
  • 5.7L V8 350CID
  • Single Inlet Muffler
  • Cutting and Welding Required During Installation
GMC Yukon 1999
  • Left
  • Right
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
GMC Yukon 2000
  • Left
  • Right
  • 5.7L V8 350CID
  • Dual Inlet Muffler
  • Cutting and Welding Required During Installation
Hyundai Sonata 1996
  • 3L V6 2972CC
  • 2L L4 1997CC
  • Cutting and Welding Required During Installation
Hyundai Sonata 1997
  • 3L V6 2972CC
  • 2L L4 1997CC
  • Cutting and Welding Required During Installation
Hyundai Sonata 1998
  • 3L V6 2972CC
  • 2L L4 1997CC
  • Cutting and Welding Required During Installation
Hyundai Sonata 1999
  • Rear
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Hyundai Sonata 2000
  • Rear
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Hyundai Sonata 2001
  • Rear
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Hyundai Sonata 2002
  • Rear
  • 2.4L L4 2351CC
  • 2.7L V6 2656CC
  • Cutting and Welding Required During Installation
Hyundai Sonata 2003
  • Rear
  • 2.4L L4 2351CC
  • 2.7L V6 2656CC
  • Cutting and Welding Required During Installation
Hyundai Sonata 2004
  • Rear
  • 2.4L L4 2351CC
  • 2.7L V6 2656CC
  • Cutting and Welding Required During Installation
Hyundai Sonata 2005
  • Rear
  • 2.4L L4 2351CC
  • 2.7L V6 2656CC
  • Cutting and Welding Required During Installation
Hyundai Tucson 2005
  • 2.7L V6 2656CC
  • Cutting and Welding Required During Installation
Hyundai Tucson 2006
  • 2.7L V6 2656CC
  • Cutting and Welding Required During Installation
Hyundai Tucson 2007
  • 2.7L V6 2656CC
  • Cutting and Welding Required During Installation
Hyundai Tucson 2008
  • 2.7L V6 2656CC
  • Cutting and Welding Required During Installation
Hyundai Tucson 2009
  • 2.7L V6 2656CC
  • Cutting and Welding Required During Installation
Infiniti QX4 1997
  • Rear Left
  • Rear Right
  • 3.3L V6 3275CC
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Infiniti QX4 2001
  • Left
  • Right
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Infiniti QX4 2002
  • Left
  • Right
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Infiniti QX4 2003
  • Left
  • Right
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Isuzu Oasis 1996
  • 2.2L L4 2156CC
  • Cutting and Welding Required During Installation
Isuzu Oasis 1997
  • 2.2L L4 2156CC
  • Cutting and Welding Required During Installation
Isuzu Oasis 1998
  • 2.3L L4 2254CC
  • Cutting and Welding Required During Installation
Isuzu Oasis 1999
  • 2.3L L4 2234CC
  • Cutting and Welding Required During Installation
Jaguar S-Type 2000
  • Left
  • Right
  • 4L V8 3996CC/244CID
  • Cutting and Welding Required During Installation
Jaguar S-Type 2001
  • Left
  • Right
  • 4L V8 3996CC/244CID
  • Cutting and Welding Required During Installation
Jaguar S-Type 2002
  • Left
  • Right
  • 4L V8 3996CC/244CID
  • Cutting and Welding Required During Installation
Kia Optima 2002
  • Rear
  • 2.4L L4 2351CC
  • 2.7L V6 2656CC
  • Cutting and Welding Required During Installation
Kia Optima 2003
  • Rear
  • 2.4L L4 2351CC
  • 2.7L V6 2656CC
  • Cutting and Welding Required During Installation
Kia Optima 2004
  • Rear
  • 2.4L L4 2351CC
  • 2.7L V6 2656CC
  • Cutting and Welding Required During Installation
Kia Optima 2005
  • Rear
  • 2.4L L4 2351CC
  • 2.7L V6 2656CC
  • Cutting and Welding Required During Installation
Kia Optima 2006
  • 2.7L V6 2656CC
  • Cutting and Welding Required During Installation
Kia Sephia 1998
  • Rear
  • 1.8L L4 1793CC
  • Cutting and Welding Required During Installation
Kia Sephia 1999
  • Rear
  • 1.8L L4 1793CC
  • Cutting and Welding Required During Installation
Kia Sephia 2000
  • Rear
  • 1.8L L4 1793CC
  • Cutting and Welding Required During Installation
Kia Sephia 2001
  • Rear
  • 1.8L L4 1793CC
  • Cutting and Welding Required During Installation
Kia Spectra 2000
  • Rear
  • 1.8L L4 1793CC
  • Cutting and Welding Required During Installation
Kia Spectra 2001
  • Rear
  • 1.8L L4 1793CC
  • Cutting and Welding Required During Installation
Kia Spectra 2002
  • 1.8L L4 1793CC
  • Cutting and Welding Required During Installation
Kia Spectra 2003
  • 1.8L L4 1793CC
  • Cutting and Welding Required During Installation
Kia Spectra 2004
  • 2L L4 1975CC
  • 1.8L L4 1793CC
  • Cutting and Welding Required During Installation
Kia Spectra 2005
  • 2L L4 1975CC
  • Cutting and Welding Required During Installation
Kia Spectra 2006
  • 2L L4 1975CC
  • Cutting and Welding Required During Installation
Kia Spectra 2007
  • 2L L4 1975CC
  • Cutting and Welding Required During Installation
Kia Spectra5 2005
  • Automatic
  • 2L L4 1975CC
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
Kia Spectra5 2006
  • Automatic
  • 2L L4 1975CC
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
Kia Spectra5 2007
  • Automatic
  • 2L L4 1975CC
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
Kia Sportage 1995
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Kia Sportage 1996
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Kia Sportage 1997
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Kia Sportage 2001
  • Rear
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Kia Sportage 2002
  • Rear
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Kia Sportage 2005
  • 2.7L V6 2656CC
  • Cutting and Welding Required During Installation
Kia Sportage 2006
  • 2.7L V6 2656CC
  • Cutting and Welding Required During Installation
Kia Sportage 2007
  • 2.7L V6 2656CC
  • Cutting and Welding Required During Installation
Kia Sportage 2008
  • 2.7L V6 2656CC
  • Cutting and Welding Required During Installation
Kia Sportage 2009
  • 2.7L V6 2656CC
  • Cutting and Welding Required During Installation
Kia Sportage 2010
  • 2.7L V6 2656CC
  • Cutting and Welding Required During Installation
Land Rover Range Rover 1996
  • Left
  • Right
  • 4L V8 3950CC
  • 4.6L V8 4554CC/278CID
  • Cutting and Welding Required During Installation
Land Rover Range Rover 1997
  • Left
  • Right
  • 4L V8 3950CC
  • 4.6L V8 4554CC/278CID
  • Cutting and Welding Required During Installation
Lexus LS400 1996
  • Front Left
  • 4L V8 3969CC
  • Cutting and Welding Required During Installation
Lexus LS400 1997
  • Front Left
  • 4L V8 3969CC
  • Cutting and Welding Required During Installation
Lexus LS400 1998
  • Left
  • 4L V8 3969CC
  • Cutting and Welding Required During Installation
Lexus LS400 1999
  • Left
  • 4L V8 3969CC
  • Cutting and Welding Required During Installation
Lexus SC400 1996
  • Left
  • 4L V8 3969CC
  • Cutting and Welding Required During Installation
Lexus SC400 1997
  • Left
  • 4L V8 3969CC
  • Cutting and Welding Required During Installation
Lexus SC400 1998
  • Left
  • 4L V8 3969CC
  • Cutting and Welding Required During Installation
Lexus SC400 1999
  • Left
  • 4L V8 3969CC
  • Cutting and Welding Required During Installation
Lexus SC400 2000
  • Left
  • 4L V8 3969CC
  • Cutting and Welding Required During Installation
Lincoln Continental 1995
  • Front Left
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Lincoln Continental 1996
  • Front Left
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Lincoln Continental 1997
  • Front Left
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Lincoln Continental 1998
  • Front Left
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Lincoln Continental 1999
  • Front Left
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Lincoln Continental 2000
  • Front Left
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Lincoln Continental 2001
  • Front Left
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Lincoln Continental 2002
  • Front Left
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Lincoln LS 2000
  • Left
  • Right
  • 3.9L V8 242CID
  • Cutting and Welding Required During Installation
Lincoln LS 2001
  • Left
  • Right
  • 3.9L V8 242CID
  • Cutting and Welding Required During Installation
Lincoln LS 2002
  • Left
  • Right
  • 3.9L V8 242CID
  • Cutting and Welding Required During Installation
Lincoln Town Car 2003
  • Rear Left
  • Rear Right
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Lincoln Town Car 2004
  • Rear Left
  • Rear Right
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Lincoln Town Car 2005
  • Rear Left
  • Rear Right
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Lincoln Town Car 2006
  • Rear Left
  • Rear Right
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Mazda 5 2006
  • 2.3L L4 2260CC
  • Cutting and Welding Required During Installation
Mazda 5 2007
  • 2.3L L4 2260CC
  • Cutting and Welding Required During Installation
Mazda 6 2003
  • Rear Left
  • Rear Right
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Mazda 6 2004
  • Rear Left
  • Rear Right
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Mazda 6 2005
  • Rear Left
  • Rear Right
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Mazda B2300 1996
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Mazda B2300 1997
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Mazda B3000 1996
  • Rear
  • Front
  • 3L V6 2986CC/182CID
  • Cutting and Welding Required During Installation
Mazda B4000 1995
  • Rear
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Mazda B4000 1996
  • Front
  • Rear
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Mazda B4000 1997
  • Front
  • Rear
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Mazda B4000 1998
  • Rear
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Mazda B4000 1999
  • Rear
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Mazda Miata 1999
  • Automatic
  • 1.8L L4 1839CC
  • Cutting and Welding Required During Installation
Mazda Miata 2000
  • Automatic
  • 1.8L L4 1839CC
  • Cutting and Welding Required During Installation
Mazda Miata 2001
  • Automatic
  • 1.8L L4 1839CC
  • Cutting and Welding Required During Installation
Mazda Miata 2002
  • Automatic
  • 1.8L L4 1839CC
  • Cutting and Welding Required During Installation
Mazda Miata 2003
  • Automatic
  • 1.8L L4 1839CC
  • Cutting and Welding Required During Installation
Mazda Miata 2004
  • Automatic
  • 1.8L L4 1839CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Mazda Miata 2005
  • Automatic
  • 1.8L L4 1839CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Mazda Millenia 2001
  • 2.5L V6 2497CC
  • Cutting and Welding Required During Installation
Mazda Millenia 2002
  • 2.5L V6 2450CC/155CID
  • Cutting and Welding Required During Installation
Mazda MPV 1995
  • Front
  • 3L V6 2954CC/180CID
  • Cutting and Welding Required During Installation
Mazda MPV 1996
  • Front
  • 3L V6 2954CC/180CID
  • Cutting and Welding Required During Installation
Mazda MPV 1997
  • Front
  • 3L V6 2954CC/180CID
  • Cutting and Welding Required During Installation
Mazda MPV 1998
  • Front
  • 3L V6 2954CC/180CID
  • Cutting and Welding Required During Installation
Mazda Protege 1995
  • Rear
  • 1.5L L4 1489CC
  • Cutting and Welding Required During Installation
Mazda Protege 1996
  • Rear
  • 1.5L L4 1489CC
  • 1.8L L4 1839CC
  • Cutting and Welding Required During Installation
Mazda Protege 1997
  • Rear
  • 1.5L L4 1489CC
  • 1.8L L4 1839CC
  • Cutting and Welding Required During Installation
Mazda Protege 1998
  • Rear
  • 1.5L L4 1489CC
  • 1.8L L4 1839CC
  • Cutting and Welding Required During Installation
Mazda Protege 2001
  • Rear
  • 2L L4 2000CC
  • Cutting and Welding Required During Installation
Mazda Protege 2002
  • Rear
  • 2L L4 2000CC
  • Cutting and Welding Required During Installation
Mazda Protege 2003
  • Rear
  • 2L L4 2000CC
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Mazda Protege5 2002
  • Rear
  • 2L L4 2000CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Mazda Protege5 2003
  • Rear
  • 2L L4 2000CC
  • Cutting and Welding Required During Installation
Mazda Tribute 2001
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Mazda Tribute 2002
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Mazda Tribute 2003
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Mazda Tribute 2004
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Mercedes-Benz ML320 2003
  • Rear Left
  • 3.2L V6 3199CC
  • Cutting and Welding Required During Installation
Mercury Cougar 1999
  • Rear
  • Standard
  • 2.5L V6 2450CC/155CID
  • Cutting and Welding Required During Installation
Mercury Cougar 2000
  • Rear
  • Standard
  • 2.5L V6 2450CC/155CID
  • Cutting and Welding Required During Installation
Mercury Cougar 2001
  • Rear
  • 2.5L V6 2450CC/155CID
  • Cutting and Welding Required During Installation
Mercury Cougar 2002
  • Rear
  • Standard
  • 2.5L V6 2450CC/155CID
  • Cutting and Welding Required During Installation
Mercury Grand Marquis 2003
  • Left
  • Right
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Mercury Grand Marquis 2004
  • Left
  • Right
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Mercury Grand Marquis 2005
  • Left
  • Right
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Mercury Grand Marquis 2006
  • Left
  • Right
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Mercury Grand Marquis 2007
  • Left
  • Right
  • 4.6L V8 281CID
  • Cutting and Welding Required During Installation
Mercury Montego 2005
  • Center
  • Front
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Mercury Montego 2006
  • Center
  • Front
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Mercury Montego 2007
  • Center
  • Front
  • 3L V6 2968CC/181CID
  • Cutting and Welding Required During Installation
Mercury Mystique 1996
  • Rear
  • Automatic
  • 2.5L V6 2450CC/155CID
  • Cutting and Welding Required During Installation
Mercury Mystique 1997
  • Rear
  • Automatic
  • 2.5L V6 2450CC/155CID
  • Cutting and Welding Required During Installation
Mercury Mystique 1998
  • Rear
  • Automatic
  • Standard
  • 2.5L V6 2450CC/155CID
  • Cutting and Welding Required During Installation
Mercury Mystique 1999
  • Rear
  • Automatic
  • Standard
  • 2.5L V6 2450CC/155CID
  • Cutting and Welding Required During Installation
Mercury Mystique 2000
  • Rear
  • Automatic
  • Standard
  • 2.5L V6 2450CC/155CID
  • Cutting and Welding Required During Installation
Mercury Sable 1996
  • Front
  • 3L V6 2986CC/182CID
  • U
  • Cutting and Welding Required During Installation
Mercury Sable 1997
  • Front
  • 3L V6 2986CC/182CID
  • U
  • Cutting and Welding Required During Installation
Mercury Sable 1998
  • Front
  • 3L V6 2986CC/182CID
  • U
  • Cutting and Welding Required During Installation
Mercury Sable 1999
  • Front
  • 3L V6 2986CC/182CID
  • U
  • Cutting and Welding Required During Installation
Mercury Tracer 1996
  • 1.8L L4 112CID
  • Cutting and Welding Required During Installation
Mitsubishi Eclipse 2000
  • Rear
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Mitsubishi Eclipse 2001
  • Rear
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Mitsubishi Eclipse 2002
  • Rear
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Mitsubishi Eclipse 2003
  • Rear
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Mitsubishi Eclipse 2004
  • Rear
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Mitsubishi Eclipse 2005
  • Rear
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Mitsubishi Galant 1999
  • Rear
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Mitsubishi Galant 2000
  • Rear
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Mitsubishi Galant 2001
  • Rear
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Mitsubishi Galant 2002
  • Rear
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Mitsubishi Galant 2003
  • Rear
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Mitsubishi Montero 1996
  • Rear
  • 3.5L V6 3497CC/215CID
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Mitsubishi Montero 1997
  • Rear
  • 3.5L V6 3497CC/215CID
  • Cutting and Welding Required During Installation
Mitsubishi Montero 1998
  • Rear
  • 3.5L V6 3497CC/215CID
  • Cutting and Welding Required During Installation
Mitsubishi Montero 1999
  • Rear
  • 3.5L V6 3497CC/215CID
  • Cutting and Welding Required During Installation
Mitsubishi Montero 2000
  • Rear
  • 3.5L V6 3497CC/215CID
  • Cutting and Welding Required During Installation
Mitsubishi Montero Sport 1997
  • Rear
  • 2.4L L4 2351CC
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
  • Federal Emissions Equipped
Mitsubishi Montero Sport 1998
  • Rear
  • 2.4L L4 2351CC
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
  • Federal Emissions Equipped
Mitsubishi Montero Sport 1999
  • Rear
  • 2.4L L4 2351CC
  • 3.5L V6 3497CC/215CID
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
  • Federal Emissions Equipped
Nissan 200SX 1997
  • 1.6L L4 1597CC/97cCID
  • Cutting and Welding Required During Installation
Nissan 200SX 1998
  • 1.6L L4 1597CC/97cCID
  • Cutting and Welding Required During Installation
Nissan Frontier 2001
  • Rear Right
  • 3.3L V6 3275CC
  • Cutting and Welding Required During Installation
Nissan Pathfinder 2001
  • Rear Left
  • Rear Right
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Nissan Pathfinder 2002
  • Rear Left
  • Rear Right
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Nissan Pathfinder 2003
  • Rear Left
  • Rear Right
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Nissan Pathfinder 2004
  • Rear Left
  • Rear Right
  • 3.5L V6 3498CC
  • Cutting and Welding Required During Installation
Nissan Xterra 2000
  • Rear Left
  • Rear Right
  • 3.3L V6 3275CC
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Nissan Xterra 2001
  • Rear Left
  • Rear Right
  • 3.3L V6 3275CC
  • Cutting and Welding Required During Installation
Nissan Xterra 2002
  • Rear Left
  • Rear Right
  • Left
  • Right
  • 3.3L V6 3275CC
  • Cutting and Welding Required During Installation
Nissan Xterra 2003
  • Left
  • Right
  • Rear Left
  • Rear Right
  • 3.3L V6 3275CC
  • Cutting and Welding Required During Installation
Nissan Xterra 2004
  • Rear Left
  • Rear Right
  • Right
  • Left
  • 3.3L V6 3275CC
  • Cutting and Welding Required During Installation
Pontiac Firefly 1999
  • 1.3L L4 1295CC/79cCID
  • Cutting and Welding Required During Installation
  • CAN
Saturn SC1 1998
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SC1 1999
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SC1 2000
  • Rear
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SC1 2001
  • Rear
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SC1 2002
  • Rear
  • 1.9L L4 116CID
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Saturn SC2 1996
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SC2 1997
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SC2 1998
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SC2 1999
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SC2 2000
  • Rear
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SC2 2001
  • Rear
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SC2 2002
  • Rear
  • 1.9L L4 116CID
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Saturn SL 1998
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SL 1999
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SL 2000
  • Rear
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SL 2001
  • Rear
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SL 2002
  • Rear
  • 1.9L L4 116CID
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Saturn SL1 1998
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SL1 1999
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SL1 2000
  • Rear
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SL1 2001
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SL1 2002
  • 1.9L L4 116CID
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Saturn SL2 1996
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SL2 1997
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SL2 1998
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SL2 1999
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SL2 2000
  • Rear
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SL2 2001
  • Rear
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SL2 2002
  • Rear
  • 1.9L L4 116CID
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Saturn SW1 1998
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SW1 1999
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SW2 1996
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SW2 1997
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SW2 1998
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SW2 1999
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SW2 2001
  • Rear
  • 1.9L L4 116CID
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
Suzuki Esteem 1996
  • Rear
  • 1.6L L4 1590CC/97cCID
  • Cutting and Welding Required During Installation
Suzuki Esteem 1997
  • Rear
  • 1.6L L4 1590CC/97cCID
  • Cutting and Welding Required During Installation
Suzuki Esteem 1998
  • Rear
  • 1.6L L4 1590CC/97cCID
  • Cutting and Welding Required During Installation
Suzuki Esteem 1999
  • Rear
  • 1.6L L4 1590CC/97cCID
  • 1.8L L4 1790CC
  • Cutting and Welding Required During Installation
Suzuki Esteem 2000
  • Rear
  • 1.6L L4 1590CC/97cCID
  • 1.8L L4 1790CC
  • Cutting and Welding Required During Installation
Suzuki Esteem 2001
  • Rear
  • 1.8L L4 1790CC
  • Cutting and Welding Required During Installation
Suzuki Esteem 2002
  • Rear
  • 1.8L L4 1790CC
  • Cutting and Welding Required During Installation
Suzuki Swift 1995
  • Front
  • 1.3L L4 1298CC/79cCID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
Suzuki Swift 1996
  • Front
  • 1.3L L4 1298CC/79cCID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
Suzuki Swift 1997
  • Front
  • 1.3L L4 1298CC/79cCID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
Suzuki Swift 1998
  • Front
  • Rear
  • 1.3L L4 1298CC/79cCID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
  • California Emissions Equipped Vehicles Registered Outside Of California
Suzuki Swift 1999
  • Front
  • Rear
  • 1.3L L4 1298CC/79cCID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
  • California Emissions Equipped Vehicles Registered Outside Of California
Suzuki Swift 2000
  • Front
  • Rear
  • 1.3L L4 1298CC/79cCID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
  • California Emissions Equipped Vehicles Registered Outside Of California
Suzuki Swift 2001
  • Front
  • Rear
  • 1.3L L4 1298CC/79cCID
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
  • California Emissions Equipped Vehicles Registered Outside Of California
Toyota Camry 2011
  • 2.5L L4 2494CC/152CID
  • Cutting and Welding Required During Installation
Toyota Paseo 1996
  • 1.5L L4 1497CC
  • Cutting and Welding Required During Installation
Toyota Paseo 1997
  • 1.5L L4 1497CC
  • Cutting and Welding Required During Installation
Toyota Paseo 1998
  • 1.5L L4 1497CC
  • Cutting and Welding Required During Installation
Toyota Previa 1996
  • Front
  • Rear
  • 2.4L L4 2438CC
  • Cutting and Welding Required During Installation
Toyota Previa 1997
  • Front
  • Rear
  • 2.4L L4 2438CC
  • Cutting and Welding Required During Installation
Toyota RAV4 1998
  • Rear
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Toyota RAV4 1999
  • Rear
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Toyota RAV4 2000
  • Rear
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Toyota Tercel 1996
  • 1.5L L4 1497CC
  • Cutting and Welding Required During Installation
Toyota Tercel 1997
  • 1.5L L4 1497CC
  • Cutting and Welding Required During Installation
Toyota Tercel 1998
  • 1.5L L4 1497CC
  • Cutting and Welding Required During Installation
Toyota Tundra 2000
  • Front Left
  • Front Right
  • Right
  • Left
  • 4.7L V8 4663CC/285CID
  • Cutting and Welding Required During Installation
Toyota Tundra 2001
  • Front Left
  • Front Right
  • Left
  • Right
  • 4.7L V8 4663CC/285CID
  • Cutting and Welding Required During Installation
Toyota Tundra 2002
  • Front Left
  • Front Right
  • Left
  • Right
  • 4.7L V8 4663CC/285CID
  • Cutting and Welding Required During Installation
Toyota Tundra 2003
  • Left
  • Right
  • 4.7L V8 4663CC/285CID
  • Cutting and Welding Required During Installation
Toyota Tundra 2004
  • Left
  • Right
  • 4.7L V8 4663CC/285CID
  • Cutting and Welding Required During Installation
Volkswagen EuroVan 1996
  • 2.5L L5 2459CC/150CID
  • Cutting and Welding Required During Installation
  • CAN