100% CANADIAN BASED 100% CANADIAN
NO DUTIES OR CUSTOMS FEES NO CUSTOMS FEES
AUTHORIZED DEALER AUTH. DEALER
30-DAY HASSLE-FREE RETURNS 30-DAY RETURNS

MagnaFlowStainless Federal Catalytic Converter without Sensor Port (2.25" IN\/2.25" OUT)

AUTHORIZED DEALER

91005

Manufacturer Part Number
*Images are for illustrative purpose only. Actual Product may differ.
SKU: MAG-91005
Please select a vehicle to verify fitment.

Please Select a Vehicle

This will be used to show you compatible parts.

Auto Parts Finder

This product doesn't fit your selection!

The product shown on this page is not compatible with the selected vehicle

!
To ensure proper parts fitment, please browse compatible products or change your selection.


Change Current Selection
FREE Shipping*
Standard Warranty

Special Order
1-3 Weeks
CA $137.00
Stainless Federal Catalytic Converter without Sensor Port (2.25" IN\/2.25" OUT) is available to buy in increments of 1
AUTHORIZED DEALER

91005

Manufacturer Part Number
More Information
Manufacturer MagnaFlow
Manufacturer Part Number 91005
Manufacturer's Suggested Retail Price (MSRP) 105.52
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
This table represents all the 556 compatible vehicles for this part:
Make Model Year
Application Notes
Position Submodel Transmission Body Type Drive Type Engine Aspiration Additional Information
Audi V8 Quattro 1992
  • Left
  • Right
  • 4.2L V8 4172CC
  • Cutting and Welding Required During Installation
Audi V8 Quattro 1993
  • Left
  • Right
  • 4.2L V8 4172CC
  • Cutting and Welding Required During Installation
Audi V8 Quattro 1994
  • Left
  • Right
  • 4.2L V8 4172CC
  • Cutting and Welding Required During Installation
Buick Century 1989
  • 3.3L V6 204CID
  • Cutting and Welding Required During Installation
Buick Century 1990
  • 3.3L V6 204CID
  • Cutting and Welding Required During Installation
Buick Century 1991
  • 3.3L V6 204CID
  • Cutting and Welding Required During Installation
Buick Century 1992
  • 3.3L V6 204CID
  • Cutting and Welding Required During Installation
Buick Century 1993
  • 3.3L V6 204CID
  • Cutting and Welding Required During Installation
Buick Electra 1980
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Buick Electra 1986
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick Electra 1987
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick Electra 1988
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick Electra 1989
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick Electra 1990
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick LeSabre 1980
  • Base
  • Limited
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Buick LeSabre 1986
  • 3.8L V6 3800CC/231CID
  • 3L V6 181CID
  • Cutting and Welding Required During Installation
Buick LeSabre 1987
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick LeSabre 1988
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick LeSabre 1989
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick LeSabre 1990
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick LeSabre 1991
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick Reatta 1988
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick Reatta 1989
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick Reatta 1990
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick Regal 1994
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick Regal 1995
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick Riviera 1986
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick Riviera 1987
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick Riviera 1988
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick Riviera 1989
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick Riviera 1990
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Buick Skyhawk 1987
  • 2L L4 122CID
  • Turbocharged
  • M
  • Cutting and Welding Required During Installation
Buick Skylark 1988
  • 2.3L L4 138CID
  • Cutting and Welding Required During Installation
Buick Skylark 1989
  • 3.3L V6 204CID
  • 2.3L L4 138CID
  • Cutting and Welding Required During Installation
Buick Skylark 1990
  • 3.3L V6 204CID
  • 2.3L L4 138CID
  • Cutting and Welding Required During Installation
Buick Skylark 1991
  • 3.3L V6 204CID
  • 2.3L L4 138CID
  • Cutting and Welding Required During Installation
Buick Skylark 1992
  • 3.3L V6 204CID
  • Cutting and Welding Required During Installation
Buick Skylark 1993
  • 3.3L V6 204CID
  • Cutting and Welding Required During Installation
Chevrolet Camaro 1985
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet Camaro 1986
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet Camaro 1987
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet Camaro 1988
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet Camaro 1989
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet Caprice 1981
  • 3.8L V6 229CID
  • 3.8L V6 3800CC/231CID
  • without Air Tube
  • Cutting and Welding Required During Installation
  • with Straight Outlet Pipe
Chevrolet Caprice 1982
  • 3.8L V6 229CID
  • 3.8L V6 3800CC/231CID
  • without Air Tube
  • Cutting and Welding Required During Installation
Chevrolet Cavalier 1987
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet Cavalier 1988
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet Cavalier 1989
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet Cavalier 1990
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Chevrolet LLV 1987
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Chevrolet LLV 1988
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Chevrolet LLV 1989
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Chevrolet LLV 1990
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Chevrolet LLV 1991
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Chevrolet LLV 1992
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Chevrolet LLV 1993
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Chevrolet LLV 1994
  • 2.2L L4 2190CC/134CID
  • Cutting and Welding Required During Installation
Chevrolet LLV 1995
  • 2.2L L4 2190CC/134CID
  • Cutting and Welding Required During Installation
Chevrolet Lumina APV 1990
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Chevrolet Lumina APV 1991
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Chevrolet Lumina APV 1993
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Chevrolet Lumina APV 1994
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Chevrolet Lumina APV 1995
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Chevrolet S10 Blazer 1983
  • 2L L4 122CID
  • 1.9L L4 119CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet S10 Blazer 1984
  • 2L L4 122CID
  • 1.9L L4 119CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet S10 Blazer 1985
  • 2.5L L4 2474CC/151CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet S10 Blazer 1986
  • 2.5L L4 2474CC/151CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet S10 Blazer 1987
  • 2.5L L4 2474CC/151CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet S10 Blazer 1988
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Chevrolet S10 1982
  • 1.9L L4 119CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet S10 1983
  • 2L L4 122CID
  • 1.9L L4 119CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet S10 1984
  • 2L L4 122CID
  • 1.9L L4 119CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet S10 1985
  • 2.5L L4 2474CC/151CID
  • 1.9L L4 119CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet S10 1986
  • 2.5L L4 2474CC/151CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet S10 1987
  • 2.5L L4 2474CC/151CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Chevrolet S10 1988
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Chevrolet S10 1989
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Chevrolet S10 1990
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Chevrolet S10 1991
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Chevrolet S10 1992
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Chevrolet S10 1993
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Chevrolet Sprint 1991
  • 1L L3 993CC/61cCID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
  • CAN
Chrysler Cirrus 1995
  • 2.4L L4 2429CC/148CID
  • 2.5L V6 2497CC/152CID
  • Cutting and Welding Required During Installation
Chrysler Cordoba 1979
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Chrysler Daytona 1984
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
  • CAN
Chrysler Daytona 1985
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
  • CAN
Chrysler Daytona 1986
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
  • CAN
Chrysler Daytona 1992
  • Rear
  • 2.5L L4 2507CC/153CID
  • Naturally Aspirated
  • without Air Tube
  • CAN
  • Cutting and Welding Required During Installation
Chrysler Daytona 1993
  • Rear
  • 2.5L L4 2507CC/153CID
  • without Air Tube
  • CAN
  • Cutting and Welding Required During Installation
Chrysler E Class 1984
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Chrysler Imperial 1992
  • 3.8L V6 3778CC/231CID
  • Cutting and Welding Required During Installation
Chrysler Imperial 1993
  • 3.8L V6 3778CC/231CID
  • Cutting and Welding Required During Installation
Chrysler Laser 1984
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Chrysler Laser 1985
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Chrysler Laser 1986
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Chrysler LeBaron 1984
  • 2.2L L4 135CID
  • E
  • Cutting and Welding Required During Installation
Chrysler LeBaron 1985
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Chrysler LeBaron 1992
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Chrysler LeBaron 1993
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Chrysler LeBaron 1994
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Chrysler LeBaron 1995
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Chrysler Newport 1979
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Chrysler Newport 1980
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Chrysler Newport 1981
  • 5.2L V8 5211CC/318CID
  • without Air Tube
  • Cutting and Welding Required During Installation
Chrysler New Yorker 1979
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Chrysler New Yorker 1980
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Chrysler New Yorker 1984
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Chrysler New Yorker 1985
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Chrysler New Yorker 1986
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Chrysler New Yorker 1987
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Chrysler New Yorker 1988
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Chrysler New Yorker 1991
  • 3.8L V6 3778CC/231CID
  • Cutting and Welding Required During Installation
Chrysler New Yorker 1992
  • 3.3L V6 3301CC/201CID
  • 3.8L V6 3778CC/231CID
  • Cutting and Welding Required During Installation
Chrysler New Yorker 1993
  • 3.3L V6 3301CC/201CID
  • 3.8L V6 3778CC/231CID
  • Cutting and Welding Required During Installation
Chrysler Town & Country 1990
  • 3.3L V6 3301CC/201CID
  • Cutting and Welding Required During Installation
Chrysler Town & Country 1991
  • 3.3L V6 3301CC/201CID
  • Cutting and Welding Required During Installation
Chrysler Town & Country 1992
  • FWD
  • 3.3L V6 3301CC/201CID
  • Cutting and Welding Required During Installation
Chrysler Town & Country 1993
  • FWD
  • 3.3L V6 3301CC/201CID
  • Cutting and Welding Required During Installation
Chrysler Town & Country 1994
  • FWD
  • 3.8L V6 3778CC/231CID
  • Cutting and Welding Required During Installation
Chrysler Town & Country 1995
  • FWD
  • 3.8L V6 3778CC/231CID
  • Cutting and Welding Required During Installation
Dodge Avenger 1995
  • 2.5L V6 2497CC/152CID
  • Cutting and Welding Required During Installation
Dodge Caravan 1987
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge Caravan 1988
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge Caravan 1989
  • 2.5L L4 2507CC/153CID
  • 3L V6 2972CC/181CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge Caravan 1990
  • 3.3L V6 3301CC/201CID
  • 2.5L L4 2507CC/153CID
  • 3L V6 2972CC/181CID
  • Turbocharged
  • Cutting and Welding Required During Installation
  • CAN
Dodge Caravan 1991
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge Caravan 1992
  • 3.3L V6 3301CC/201CID
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge Caravan 1993
  • 3.3L V6 3301CC/201CID
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge Caravan 1994
  • FWD
  • 3.3L V6 3301CC/201CID
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge Caravan 1995
  • 3.3L V6 3301CC/201CID
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge Charger 1977
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Dodge Charger 1985
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge Charger 1986
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge Charger 1987
  • 2.2L L4 135CID
  • Cutting and Welding Required During Installation
Dodge D100 1984
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Dodge Daytona 1984
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge Daytona 1985
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge Daytona 1986
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge Daytona 1992
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge Daytona 1993
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge Dynasty 1992
  • 3.3L V6 3301CC/201CID
  • Cutting and Welding Required During Installation
Dodge Dynasty 1993
  • 3.3L V6 3301CC/201CID
  • Cutting and Welding Required During Installation
Dodge Grand Caravan 1988
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge Grand Caravan 1989
  • 3L V6 2972CC/181CID
  • 2.5L L4 2507CC/153CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge Grand Caravan 1990
  • 3.3L V6 3301CC/201CID
  • Cutting and Welding Required During Installation
Dodge Grand Caravan 1991
  • FWD
  • 3.3L V6 3301CC/201CID
  • Cutting and Welding Required During Installation
Dodge Grand Caravan 1992
  • FWD
  • 3.3L V6 3301CC/201CID
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge Grand Caravan 1993
  • FWD
  • 3.3L V6 3301CC/201CID
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge Grand Caravan 1994
  • FWD
  • 3.3L V6 3301CC/201CID
  • 3.8L V6 3778CC/231CID
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge Grand Caravan 1995
  • FWD
  • 3.3L V6 3301CC/201CID
  • 3.8L V6 3778CC/231CID
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge Lancer 1985
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge Lancer 1986
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge Lancer 1987
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge Lancer 1988
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge Lancer 1989
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge Mini Ram 1987
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge Mini Ram 1988
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge Monaco 1990
  • 3L V6 2972CC/182CID
  • Cutting and Welding Required During Installation
Dodge Monaco 1991
  • 3L V6 2972CC/182CID
  • Cutting and Welding Required During Installation
Dodge Monaco 1992
  • 3L V6 2972CC/182CID
  • Cutting and Welding Required During Installation
Dodge Shadow 1987
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge Shadow 1989
  • 2.5L L4 2507CC/153CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge Shadow 1990
  • 2.5L L4 2507CC/153CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge Shadow 1991
  • 2.5L L4 2507CC/153CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge Shadow 1992
  • 2.5L L4 2507CC/153CID
  • 3L V6 2972CC/181CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Dodge Shadow 1993
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge Shadow 1994
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge Spirit 1992
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge Spirit 1993
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge Spirit 1994
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge Spirit 1995
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge St. Regis 1981
  • 5.2L V8 5211CC/318CID
  • without Air Tube
  • Cutting and Welding Required During Installation
Dodge Stealth 1991
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge Stealth 1992
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge Stealth 1993
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge Stealth 1994
  • Rear
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge Stealth 1995
  • Rear
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge Stealth 1996
  • Rear
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Dodge Stratus 1995
  • 2.4L L4 2429CC/148CID
  • 2L L4 1996CC/122CID
  • 2.5L V6 2497CC/152CID
  • Cutting and Welding Required During Installation
Eagle Medallion 1988
  • 2.2L L4 2163CC/132CID
  • Cutting and Welding Required During Installation
Eagle Medallion 1989
  • 2.2L L4 2163CC/132CID
  • Cutting and Welding Required During Installation
Eagle Premier 1988
  • 2.5L L4 150CID
  • 3L V6 2972CC/182CID
  • Cutting and Welding Required During Installation
Eagle Premier 1989
  • 2.5L L4 150CID
  • 3L V6 2972CC/182CID
  • Cutting and Welding Required During Installation
Eagle Premier 1990
  • 3L V6 2972CC/182CID
  • Cutting and Welding Required During Installation
Eagle Premier 1991
  • 3L V6 2972CC/182CID
  • Cutting and Welding Required During Installation
Eagle Premier 1992
  • 3L V6 2972CC/182CID
  • Cutting and Welding Required During Installation
Ford Aerostar 1986
  • Front
  • Rear
  • 2.8L V6 171CID
  • Cutting and Welding Required During Installation
Ford Aerostar 1990
  • Front
  • Rear
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford Aerostar 1991
  • Front
  • Rear
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford Aerostar 1992
  • Front
  • Rear
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford Aerostar 1993
  • Front
  • Rear
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford Aerostar 1994
  • Front
  • Rear
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford Aerostar 1995
  • Front
  • Rear
  • 4L V6 245CID
  • Cutting and Welding Required During Installation
Ford E-100 Econoline 1977
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-100 Econoline 1978
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford E-100 Econoline 1983
  • 4.9L L6 4917CC/300CID
  • without Air Tube
  • Cutting and Welding Required During Installation
Ford E-100 Econoline Club Wagon 1983
  • 4.9L L6 4917CC/300CID
  • without Air Tube
  • Cutting and Welding Required During Installation
Ford F-100 1980
  • 5L V8 302CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford F-100 1981
  • 5L V8 302CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford F-100 1982
  • 5L V8 302CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford F-100 1983
  • 5L V8 302CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford F-150 1980
  • 5L V8 302CID
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford F-150 1981
  • 5.8L V8 351CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford F-150 1982
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford F-150 1983
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford F-250 1980
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford F-250 1981
  • 5L V8 302CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford F-250 1982
  • 5L V8 302CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford F-250 1983
  • 5L V8 302CID
  • 4.9L L6 4917CC/300CID
  • Cutting and Welding Required During Installation
Ford Mustang 1981
  • Rear
  • 2.3L L4 140CID
  • without Air Tube
  • USA
  • Cutting and Welding Required During Installation
  • CAN
Ford Mustang 1982
  • Rear
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
  • USA
  • CAN
Ford Probe 1993
  • 2.5L V6 2497CC
  • 2L L4 1989CC/122CID
  • Cutting and Welding Required During Installation
Ford Probe 1994
  • 2.5L V6 2497CC
  • 2L L4 1989CC/122CID
  • Cutting and Welding Required During Installation
Ford Probe 1995
  • 2.5L V6 2497CC
  • 2L L4 1989CC/122CID
  • Cutting and Welding Required During Installation
Ford Ranger 1985
  • 2L L4 1989CC/122CID
  • 2.3L L4 140CID
  • without Air Tube
  • Cutting and Welding Required During Installation
Ford Ranger 1986
  • Standard
  • Automatic
  • 2L L4 1989CC/122CID
  • 2.3L L4 140CID
  • without Air Tube
  • Cutting and Welding Required During Installation
  • Split Date From: From 02/1986
  • Split Date To: To 12/1985
Ford Ranger 1995
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Ford Taurus 1989
  • Rear
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Ford Taurus 1990
  • Rear
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Geo Metro 1989
  • Standard
  • 1L L3 993CC/61cCID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Geo Metro 1990
  • Standard
  • 1L L3 993CC/61cCID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Geo Metro 1991
  • Standard
  • 1L L3 993CC/61cCID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Geo Metro 1992
  • Standard
  • 1L L3 993CC/61cCID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Geo Metro 1993
  • Standard
  • 1L L3 993CC/61cCID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Geo Metro 1994
  • Standard
  • 1L L3 993CC/61cCID
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
GMC S15 Jimmy 1983
  • 2L L4 122CID
  • 1.9L L4 119CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
GMC S15 Jimmy 1984
  • 2L L4 122CID
  • 1.9L L4 119CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
GMC S15 Jimmy 1985
  • 2.5L L4 2474CC/151CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
GMC S15 Jimmy 1986
  • 2.5L L4 2474CC/151CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
GMC S15 Jimmy 1987
  • 2.5L L4 2474CC/151CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
GMC S15 Jimmy 1988
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
GMC S15 1982
  • 1.9L L4 119CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
GMC S15 1983
  • 2L L4 122CID
  • 1.9L L4 119CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
GMC S15 1984
  • 2L L4 122CID
  • 1.9L L4 119CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
GMC S15 1985
  • 2.5L L4 2474CC/151CID
  • 1.9L L4 119CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
GMC S15 1986
  • 2.5L L4 2474CC/151CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
GMC S15 1987
  • 2.5L L4 2474CC/151CID
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
GMC S15 1988
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
GMC S15 1989
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
GMC S15 1990
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
GMC Sonoma 1991
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
GMC Sonoma 1992
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
GMC Sonoma 1993
  • 2.5L L4 2474CC/151CID
  • Cutting and Welding Required During Installation
Honda Passport 1994
  • Rear
  • 2.6L L4 2559CC
  • Cutting and Welding Required During Installation
Honda Passport 1995
  • Rear
  • 2.6L L4 2559CC
  • Cutting and Welding Required During Installation
Jeep Cherokee 1986
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep Cherokee 1987
  • 4L L6 242CID
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep Cherokee 1988
  • 4L L6 242CID
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep Cherokee 1989
  • 4L L6 242CID
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep Cherokee 1990
  • 4L L6 242CID
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep Cherokee 1991
  • 4L L6 242CID
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep Cherokee 1992
  • 4L L6 242CID
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep Cherokee 1993
  • 4L L6 242CID
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep Cherokee 1994
  • 4L L6 242CID
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep Cherokee 1995
  • 4L L6 242CID
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep CJ6 1975
  • 3.8L L6 232CID
  • 4.2L L6 258CID
  • 5L V8 304CID
  • Cutting and Welding Required During Installation
Jeep CJ7 1976
  • 5L V8 304CID
  • Cutting and Welding Required During Installation
Jeep CJ7 1977
  • 5L V8 304CID
  • Cutting and Welding Required During Installation
Jeep Comanche 1986
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep Comanche 1987
  • 4L L6 242CID
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep Comanche 1988
  • 4L L6 242CID
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep Comanche 1989
  • 4L L6 242CID
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep Comanche 1990
  • 4L L6 242CID
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep Comanche 1991
  • 4L L6 242CID
  • Cutting and Welding Required During Installation
Jeep Comanche 1992
  • 4L L6 242CID
  • Cutting and Welding Required During Installation
Jeep J10 1978
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Jeep J20 1978
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Jeep Wagoneer 1986
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep Wagoneer 1987
  • 4L L6 242CID
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep Wagoneer 1988
  • 4L L6 242CID
  • Cutting and Welding Required During Installation
Jeep Wagoneer 1989
  • 4L L6 242CID
  • Cutting and Welding Required During Installation
Jeep Wagoneer 1990
  • 4L L6 242CID
  • Cutting and Welding Required During Installation
Jeep Wrangler 1987
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep Wrangler 1988
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep Wrangler 1989
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep Wrangler 1990
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep Wrangler 1992
  • 4L L6 242CID
  • Cutting and Welding Required During Installation
Jeep Wrangler 1993
  • 4L L6 242CID
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep Wrangler 1994
  • 4L L6 242CID
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Jeep Wrangler 1995
  • 4L L6 242CID
  • 2.5L L4 150CID
  • Cutting and Welding Required During Installation
Lexus ES300 1995
  • 3L V6 2995CC
  • Cutting and Welding Required During Installation
Lexus GS300 1993
  • Rear
  • 3L L6 2997CC
  • Cutting and Welding Required During Installation
Lexus GS300 1994
  • Rear
  • 3L L6 2997CC
  • Cutting and Welding Required During Installation
Lexus GS300 1995
  • Rear
  • 3L L6 2997CC
  • Cutting and Welding Required During Installation
Lexus LS400 1990
  • Front Right
  • Front Left
  • 4L V8 3969CC
  • Cutting and Welding Required During Installation
Lexus LS400 1991
  • Front Right
  • Front Left
  • Rear
  • 4L V8 3969CC
  • Cutting and Welding Required During Installation
Lexus LS400 1992
  • Front Right
  • Front Left
  • Rear
  • 4L V8 3969CC
  • Cutting and Welding Required During Installation
Lexus LS400 1993
  • Front Right
  • Front Left
  • Rear
  • 4L V8 3969CC
  • Cutting and Welding Required During Installation
Lexus LS400 1994
  • Front Right
  • Front Left
  • Rear
  • 4L V8 3969CC
  • Cutting and Welding Required During Installation
Lexus LS400 1995
  • Rear
  • 4L V8 3969CC
  • Cutting and Welding Required During Installation
Lexus SC300 1992
  • Rear
  • 3L L6 2997CC
  • Cutting and Welding Required During Installation
Lexus SC300 1993
  • Rear
  • 3L L6 2997CC
  • Cutting and Welding Required During Installation
Lexus SC300 1994
  • Rear
  • 3L L6 2997CC
  • Cutting and Welding Required During Installation
Lexus SC300 1995
  • Rear
  • 3L L6 2997CC
  • Cutting and Welding Required During Installation
Lexus SC400 1992
  • Rear
  • 4L V8 3969CC
  • Cutting and Welding Required During Installation
Lexus SC400 1993
  • Rear
  • 4L V8 3969CC
  • Cutting and Welding Required During Installation
Lexus SC400 1994
  • Rear
  • 4L V8 3969CC
  • Cutting and Welding Required During Installation
Lexus SC400 1995
  • Rear
  • 4L V8 3969CC
  • Cutting and Welding Required During Installation
Lincoln Continental 1988
  • Rear
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Lincoln Continental 1989
  • Rear
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Lincoln Continental 1990
  • Rear
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Mazda 626 1993
  • Standard
  • 2.5L V6 2497CC
  • 2L L4 1991CC
  • Cutting and Welding Required During Installation
  • Federal Emissions Equipped
Mazda 626 1994
  • Rear
  • Standard
  • 2.5L V6 2497CC
  • 2L L4 1991CC
  • Cutting and Welding Required During Installation
  • Federal Emissions Equipped
Mazda 626 1995
  • 2.5L V6 2497CC
  • 2L L4 1991CC
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
  • California Emissions Equipped Vehicles Registered Outside Of California
Mazda B2200 1990
  • 2.2L L4 2184CC
  • FI
  • Cutting and Welding Required During Installation
Mazda B2200 1991
  • 2.2L L4 2184CC
  • FI
  • Cutting and Welding Required During Installation
Mazda B2200 1992
  • 2.2L L4 2184CC
  • FI
  • Cutting and Welding Required During Installation
Mazda B2200 1993
  • 2.2L L4 2184CC
  • FI
  • Cutting and Welding Required During Installation
Mazda B2600 1991
  • 2.6L L4 2606CC
  • Cutting and Welding Required During Installation
Mazda B2600 1992
  • 2.6L L4 2606CC
  • Cutting and Welding Required During Installation
Mazda B2600 1993
  • 2.6L L4 2606CC
  • Cutting and Welding Required During Installation
Mazda Miata 1994
  • 1.8L L4 1839CC
  • Cutting and Welding Required During Installation
Mazda Miata 1995
  • 1.8L L4 1839CC
  • Cutting and Welding Required During Installation
Mazda MPV 1989
  • 3L V6 2954CC/180CID
  • 2.6L L4 2606CC
  • Cutting and Welding Required During Installation
Mazda MPV 1990
  • 3L V6 2954CC/180CID
  • 2.6L L4 2606CC
  • Cutting and Welding Required During Installation
Mazda MPV 1991
  • 2.6L L4 2606CC
  • 3L V6 2954CC/180CID
  • Cutting and Welding Required During Installation
Mazda MPV 1992
  • 2.6L L4 2606CC
  • 3L V6 2954CC/180CID
  • Cutting and Welding Required During Installation
Mazda MPV 1993
  • 3L V6 2954CC/180CID
  • 2.6L L4 2606CC
  • Cutting and Welding Required During Installation
Mazda MPV 1994
  • 2.6L L4 2606CC
  • Cutting and Welding Required During Installation
Mazda MX-6 1993
  • Standard
  • 2.5L V6 2497CC
  • 2L L4 1991CC
  • Cutting and Welding Required During Installation
  • Federal Emissions Equipped
Mazda MX-6 1994
  • Standard
  • 2.5L V6 2497CC
  • 2L L4 1991CC
  • Cutting and Welding Required During Installation
  • Federal Emissions Equipped
Mazda MX-6 1995
  • 2.5L V6 2497CC
  • 2L L4 1991CC
  • Cutting and Welding Required During Installation
  • Federal Emissions Equipped
Mercury Capri 1982
  • Rear
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
  • CAN
Mercury Sable 1989
  • Rear
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Mercury Sable 1990
  • Rear
  • 3.8L V6 232CID
  • Cutting and Welding Required During Installation
Merkur XR4Ti 1985
  • 2.3L L4 140CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Merkur XR4Ti 1986
  • 2.3L L4 140CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Merkur XR4Ti 1987
  • 2.3L L4 140CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Merkur XR4Ti 1988
  • 2.3L L4 140CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Merkur XR4Ti 1989
  • 2.3L L4 140CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Mitsubishi 3000GT 1991
  • Right
  • 3L V6 2972CC/181CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Mitsubishi 3000GT 1992
  • Right
  • 3L V6 2972CC/181CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Mitsubishi 3000GT 1993
  • Right
  • 3L V6 2972CC/181CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Mitsubishi 3000GT 1994
  • Rear
  • Right
  • 3L V6 2972CC/181CID
  • Naturally Aspirated
  • Turbocharged
  • Cutting and Welding Required During Installation
Mitsubishi 3000GT 1995
  • Rear
  • Right
  • 3L V6 2972CC/181CID
  • Naturally Aspirated
  • Turbocharged
  • Cutting and Welding Required During Installation
Mitsubishi Diamante 1993
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Mitsubishi Diamante 1994
  • Rear
  • Wagon
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Mitsubishi Diamante 1995
  • Rear
  • Wagon
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Mitsubishi Expo 1992
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Mitsubishi Expo 1993
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Mitsubishi Expo 1994
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Mitsubishi Expo LRV 1992
  • 1.8L L4 1834CC/112CID
  • Cutting and Welding Required During Installation
Mitsubishi Expo LRV 1993
  • 2.4L L4 2351CC
  • 1.8L L4 1834CC/112CID
  • Cutting and Welding Required During Installation
Mitsubishi Expo LRV 1994
  • 2.4L L4 2351CC
  • 1.8L L4 1834CC/112CID
  • Cutting and Welding Required During Installation
Mitsubishi Galant 1994
  • 2.4L L4 2351CC
  • Cutting and Welding Required During Installation
Nissan 720 1981
  • 2.2L L4 2164CC
  • Cutting and Welding Required During Installation
Nissan 720 1982
  • 2.2L L4 2164CC
  • Cutting and Welding Required During Installation
Nissan 720 1983
  • 2.2L L4 2164CC
  • Cutting and Welding Required During Installation
Nissan Stanza 1990
  • 2.4L L4 2389CC
  • Cutting and Welding Required During Installation
Nissan Stanza 1991
  • 2.4L L4 2389CC
  • Cutting and Welding Required During Installation
Nissan Stanza 1992
  • 2.4L L4 2389CC
  • Cutting and Welding Required During Installation
Oldsmobile 98 1980
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Oldsmobile 98 1986
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Oldsmobile 98 1987
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Oldsmobile 98 1988
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Oldsmobile 98 1989
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Oldsmobile 98 1990
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Oldsmobile Achieva 1992
  • 3.3L V6 204CID
  • Cutting and Welding Required During Installation
Oldsmobile Achieva 1993
  • 3.3L V6 204CID
  • Cutting and Welding Required During Installation
Oldsmobile Calais 1987
  • 2.3L L4 138CID
  • Cutting and Welding Required During Installation
Oldsmobile Custom Cruiser 1980
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Calais 1988
  • 2.3L L4 138CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Calais 1989
  • 2.3L L4 138CID
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Calais 1990
  • 3.3L V6 204CID
  • 2.3L L4 138CID
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Calais 1991
  • 3.3L V6 204CID
  • 2.3L L4 138CID
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Ciera 1989
  • 3.3L V6 204CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Ciera 1990
  • 3.3L V6 204CID
  • 3.3L V6 3340CC/204CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Ciera 1991
  • 3.3L V6 204CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Ciera 1992
  • 3.3L V6 204CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Ciera 1993
  • 3.3L V6 204CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Cruiser 1989
  • 3.3L V6 204CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Cruiser 1990
  • 3.3L V6 204CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Cruiser 1991
  • 3.3L V6 204CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Cruiser 1992
  • 3.3L V6 204CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Cruiser 1993
  • 3.3L V6 204CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Supreme 1990
  • 2.3L L4 138CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Supreme 1991
  • Base
  • 3.1L V6 189CID
  • with Single Exhaust
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Supreme 1992
  • Base
  • 3.1L V6 189CID
  • with Single Exhaust
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Supreme 1994
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Oldsmobile Cutlass Supreme 1995
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Oldsmobile Delta 88 1980
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Oldsmobile Delta 88 1986
  • 3.8L V6 3800CC/231CID
  • 3L V6 181CID
  • Cutting and Welding Required During Installation
Oldsmobile Delta 88 1987
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Oldsmobile Delta 88 1988
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Oldsmobile Delta 88 1989
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Oldsmobile Delta 88 1990
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Oldsmobile Delta 88 1991
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Oldsmobile Silhouette 1990
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Oldsmobile Silhouette 1991
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Oldsmobile Silhouette 1993
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Oldsmobile Silhouette 1994
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Oldsmobile Silhouette 1995
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Oldsmobile Starfire 1975
  • 3.8L V6 231CID
  • Cutting and Welding Required During Installation
Oldsmobile Starfire 1979
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Oldsmobile Toronado 1980
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Oldsmobile Toronado 1986
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Oldsmobile Toronado 1987
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Oldsmobile Toronado 1988
  • 3.8L V6 3800CC/231CID
  • without Air Tube
  • Cutting and Welding Required During Installation
Plymouth Acclaim 1992
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Plymouth Acclaim 1993
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Plymouth Acclaim 1994
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Plymouth Acclaim 1995
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Plymouth Caravelle 1985
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Plymouth Caravelle 1986
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Plymouth Caravelle 1987
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Plymouth Caravelle 1988
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Plymouth Duster 1975
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Plymouth Fury 1977
  • 5.2L V8 5211CC/318CID
  • 5.9L V8 360CID
  • Cutting and Welding Required During Installation
Plymouth Fury 1978
  • 3.7L L6 3687CC/225CID
  • Cutting and Welding Required During Installation
Plymouth Grand Voyager 1988
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Plymouth Grand Voyager 1989
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Plymouth Grand Voyager 1990
  • 3.3L V6 3301CC/201CID
  • Cutting and Welding Required During Installation
Plymouth Grand Voyager 1992
  • FWD
  • 3.3L V6 3301CC/201CID
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Plymouth Grand Voyager 1993
  • FWD
  • 3.3L V6 3301CC/201CID
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Plymouth Grand Voyager 1994
  • FWD
  • 3.3L V6 3301CC/201CID
  • 3.8L V6 3778CC/231CID
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Plymouth Grand Voyager 1995
  • FWD
  • 3.3L V6 3301CC/201CID
  • 3.8L V6 3778CC/231CID
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Plymouth PB100 1980
  • 3.7L L6 3687CC/225CID
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
  • without Air Tube
Plymouth PB150 1981
  • 3.7L L6 3687CC/225CID
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
  • without Air Tube
Plymouth Scamp 1975
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Plymouth Scamp 1976
  • 5.2L V8 5211CC/318CID
  • Cutting and Welding Required During Installation
Plymouth Sundance 1987
  • 2.2L L4 135CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Plymouth Sundance 1989
  • 2.5L L4 2507CC/153CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Plymouth Sundance 1990
  • 2.5L L4 2507CC/153CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Plymouth Sundance 1991
  • 2.5L L4 2507CC/153CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Plymouth Sundance 1992
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Plymouth Sundance 1993
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Plymouth Sundance 1994
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Plymouth Voyager 1987
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Plymouth Voyager 1988
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Plymouth Voyager 1989
  • 2.5L L4 2507CC/153CID
  • 3L V6 2972CC/181CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Plymouth Voyager 1990
  • 2.5L L4 2507CC/153CID
  • 3L V6 2972CC/181CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Plymouth Voyager 1991
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Plymouth Voyager 1992
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Plymouth Voyager 1993
  • FWD
  • 3.3L V6 3301CC/201CID
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Plymouth Voyager 1994
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Plymouth Voyager 1995
  • 3.3L V6 3301CC/201CID
  • 3L V6 2972CC/181CID
  • Cutting and Welding Required During Installation
Pontiac Bonneville 1987
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Pontiac Bonneville 1988
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Pontiac Bonneville 1989
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Pontiac Bonneville 1990
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Pontiac Bonneville 1991
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Pontiac Catalina 1981
  • 3.8L V6 3800CC/231CID
  • without Air Tube
  • Cutting and Welding Required During Installation
Pontiac Firebird 1978
  • 5.7L V8 350CID
  • Cutting and Welding Required During Installation
Pontiac Firebird 1985
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Pontiac Firebird 1986
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Pontiac Firebird 1987
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Pontiac Firebird 1988
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Pontiac Firebird 1989
  • 2.8L V6 173CID
  • Cutting and Welding Required During Installation
Pontiac Grand Am 1988
  • 2.3L L4 138CID
  • Cutting and Welding Required During Installation
Pontiac Grand Am 1989
  • 2.3L L4 138CID
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Pontiac Grand Am 1990
  • 2.3L L4 138CID
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Pontiac Grand Am 1991
  • 2.3L L4 138CID
  • 2.3L L4 140CID
  • Cutting and Welding Required During Installation
Pontiac Grand Am 1992
  • 3.3L V6 204CID
  • Cutting and Welding Required During Installation
Pontiac Grand Am 1993
  • 3.3L V6 204CID
  • Cutting and Welding Required During Installation
Pontiac Grand Prix 1990
  • 3.1L V6 189CID
  • 2.3L L4 138CID
  • Dual Exhaust
  • Cutting and Welding Required During Installation
Pontiac Grand Prix 1991
  • 3.1L V6 189CID
  • 2.3L L4 138CID
  • Dual Exhaust
  • Cutting and Welding Required During Installation
Pontiac Grand Prix 1992
  • 3.1L V6 189CID
  • Dual Exhaust
  • Cutting and Welding Required During Installation
Pontiac Grand Prix 1993
  • 3.1L V6 189CID
  • Dual Exhaust
  • Cutting and Welding Required During Installation
Pontiac Grand Prix 1994
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
  • Dual Exhaust
Pontiac Grand Prix 1995
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
  • Dual Exhaust
Pontiac Laurentian 1981
  • 3.8L V6 231CID
  • without Air Tube
  • CAN
  • Cutting and Welding Required During Installation
Pontiac Sunbird 1987
  • 2L L4 122CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Pontiac Sunbird 1988
  • 2L L4 122CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Pontiac Sunbird 1989
  • 2L L4 122CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Pontiac Sunbird 1990
  • 2L L4 122CID
  • Turbocharged
  • Cutting and Welding Required During Installation
Pontiac Trans Sport 1991
  • 3.1L V6 189CID
  • Cutting and Welding Required During Installation
Pontiac Trans Sport 1993
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Pontiac Trans Sport 1994
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Pontiac Trans Sport 1995
  • 3.8L V6 3800CC/231CID
  • Cutting and Welding Required During Installation
Porsche 911 1978
  • 3L H6 2999CC
  • Cutting and Welding Required During Installation
Porsche 911 1980
  • 3L H6 2999CC
  • Cutting and Welding Required During Installation
Porsche 911 1981
  • 3L H6 2999CC
  • 3.3L H6 3294CC
  • Cutting and Welding Required During Installation
  • CAN
Porsche 911 1982
  • 3L H6 2999CC
  • 3.3L H6 3294CC
  • Cutting and Welding Required During Installation
  • CAN
Porsche 911 1983
  • 3L H6 2999CC
  • 3.3L H6 3294CC
  • Cutting and Welding Required During Installation
  • CAN
Porsche 911 1984
  • 3.3L H6 3294CC
  • 3.2L H6 3163CC
  • Cutting and Welding Required During Installation
  • CAN
  • without Air Tube
  • USA
Porsche 911 1985
  • 3.3L H6 3294CC
  • 3.2L H6 3163CC
  • Cutting and Welding Required During Installation
  • CAN
  • without Air Tube
  • USA
Porsche 911 1986
  • 3.2L H6 3163CC
  • 3.3L H6 3294CC
  • Cutting and Welding Required During Installation
Porsche 911 1987
  • 3.2L H6 3163CC
  • 3.3L H6 3294CC
  • Cutting and Welding Required During Installation
Porsche 911 1988
  • 3.2L H6 3163CC
  • 3.3L H6 3294CC
  • Cutting and Welding Required During Installation
Porsche 911 1989
  • 3.2L H6 3163CC
  • 3.3L H6 3294CC
  • Cutting and Welding Required During Installation
Porsche 911 1990
  • 3.6L H6 3606CC
  • Cutting and Welding Required During Installation
Porsche 911 1991
  • 3.6L H6 3606CC
  • 3.3L H6 3294CC
  • Cutting and Welding Required During Installation
Porsche 911 1992
  • 3.6L H6 3606CC
  • 3.3L H6 3294CC
  • Cutting and Welding Required During Installation
Porsche 911 1993
  • 3.6L H6 3606CC
  • Cutting and Welding Required During Installation
Porsche 911 1994
  • 3.6L H6 3606CC
  • Cutting and Welding Required During Installation
Porsche 911 1995
  • 3.6L H6 3606CC
  • Cutting and Welding Required During Installation
Porsche 924 1980
  • 2L L4 1983CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Porsche 924 1981
  • 2L L4 1983CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Porsche 924 1982
  • 2L L4 1983CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Porsche 944 1989
  • 3L L4 2999CC
  • Cutting and Welding Required During Installation
Porsche 944 1990
  • 3L L4 2983CC
  • Cutting and Welding Required During Installation
  • USA
  • CAN
Porsche 944 1991
  • 3L L4 2983CC
  • Cutting and Welding Required During Installation
Renault Fuego 1982
  • 1.6L L4 1565CC/96cCID
  • Turbocharged
  • Cutting and Welding Required During Installation
Renault Fuego 1983
  • 1.6L L4 1565CC/96cCID
  • Turbocharged
  • Cutting and Welding Required During Installation
Renault Fuego 1984
  • 1.6L L4 1565CC/96cCID
  • Cutting and Welding Required During Installation
Saab 9000 1986
  • 2L L4 1985CC
  • Cutting and Welding Required During Installation
Saab 9000 1987
  • 2L L4 1985CC
  • Cutting and Welding Required During Installation
Saab 9000 1988
  • 2L L4 1985CC
  • Cutting and Welding Required During Installation
Saab 9000 1989
  • 2L L4 1985CC
  • Cutting and Welding Required During Installation
  • USA
Saab 9000 1990
  • 2L L4 1985CC
  • 2.3L L4 2290CC/140CID
  • Cutting and Welding Required During Installation
  • USA
Saab 9000 1991
  • 2.3L L4 2290CC
  • 2.3L L4 2290CC/140CID
  • Cutting and Welding Required During Installation
Saab 9000 1992
  • 2.3L L4 2290CC
  • 2.3L L4 2290CC/140CID
  • Cutting and Welding Required During Installation
Saab 9000 1993
  • 2.3L L4 2290CC/140CID
  • 2.3L L4 2290CC
  • Naturally Aspirated
  • Turbocharged
  • Cutting and Welding Required During Installation
Saab 9000 1994
  • 2.3L L4 2290CC
  • 2.3L L4 2290CC/140CID
  • Turbocharged
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Saab 9000 1995
  • 3L V6 2961CC/181CID
  • Cutting and Welding Required During Installation
Saturn SC 1991
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SC 1992
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SC1 1993
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SC1 1994
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SC1 1995
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SL 1991
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SL 1992
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SL 1993
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SL 1994
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SL 1995
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SL1 1991
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SL1 1992
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SL1 1993
  • 1.9L L4 116CID
  • SOHC
  • Cutting and Welding Required During Installation
Saturn SL1 1994
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SL1 1995
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SL2 1991
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SL2 1992
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SW1 1993
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SW1 1994
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Saturn SW1 1995
  • 1.9L L4 116CID
  • Cutting and Welding Required During Installation
Suzuki Sidekick 1993
  • 1.6L L4 1590CC/97cCID
  • 4
  • Cutting and Welding Required During Installation
Suzuki Sidekick 1994
  • 1.6L L4 1590CC/97cCID
  • Cutting and Welding Required During Installation
Suzuki Sidekick 1995
  • 1.6L L4 1590CC/97cCID
  • Cutting and Welding Required During Installation
Toyota Avalon 1995
  • 3L V6 2995CC
  • Cutting and Welding Required During Installation
Toyota Camry 1988
  • 2.5L V6 2508CC
  • without Air Tube
  • Cutting and Welding Required During Installation
Toyota Camry 1989
  • 2.5L V6 2508CC
  • without Air Tube
  • Cutting and Welding Required During Installation
Toyota Camry 1990
  • 2.5L V6 2508CC
  • without Air Tube
  • Cutting and Welding Required During Installation
Toyota Camry 1991
  • 2.5L V6 2508CC
  • without Air Tube
  • Cutting and Welding Required During Installation
Toyota Camry 1995
  • 3L V6 2995CC
  • Cutting and Welding Required During Installation
Toyota Celica 1990
  • Rear
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Toyota Celica 1991
  • Rear
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Toyota Celica 1992
  • Rear
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Toyota Celica 1993
  • Rear
  • 2L L4 1998CC/122CID
  • Cutting and Welding Required During Installation
Toyota Cressida 1981
  • Rear
  • 2.8L L6 2759CC
  • Cutting and Welding Required During Installation
Toyota Cressida 1982
  • Rear
  • 2.8L L6 2759CC
  • Cutting and Welding Required During Installation
Toyota Previa 1991
  • 2.4L L4 2438CC
  • Cutting and Welding Required During Installation
Toyota Previa 1992
  • 2.4L L4 2438CC
  • Cutting and Welding Required During Installation
Toyota Previa 1993
  • 2.4L L4 2438CC
  • Cutting and Welding Required During Installation
Toyota Previa 1994
  • 2.4L L4 2438CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Toyota Previa 1995
  • 2.4L L4 2438CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Toyota Supra 1987
  • Rear
  • 3L L6 2954CC
  • Naturally Aspirated
  • Cutting and Welding Required During Installation
Toyota Supra 1988
  • Rear
  • 3L L6 2954CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Toyota Supra 1989
  • Rear
  • 3L L6 2954CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Toyota Supra 1990
  • Rear
  • 3L L6 2954CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Toyota Supra 1991
  • Rear
  • 3L L6 2954CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Toyota Supra 1992
  • Rear
  • 3L L6 2954CC
  • Turbocharged
  • Cutting and Welding Required During Installation
Toyota Van 1988
  • RWD
  • 2.2L L4 2237CC
  • Cutting and Welding Required During Installation
Toyota Van 1989
  • RWD
  • 2.2L L4 2237CC
  • Cutting and Welding Required During Installation
Volvo 780 1989
  • 2.3L L4 2316CC
  • Cutting and Welding Required During Installation
Volvo 780 1990
  • 2.3L L4 2316CC
  • Cutting and Welding Required During Installation
Volvo 780 1991
  • 2.3L L4 2316CC
  • Cutting and Welding Required During Installation