100% CANADIAN BASED 100% CANADIAN
NO DUTIES OR CUSTOMS FEES NO CUSTOMS FEES
AUTHORIZED DEALER AUTH. DEALER
30-DAY HASSLE-FREE RETURNS 30-DAY RETURNS

ReibungPerformance Black Cross Drilled Brake Rotors with Carbon Pads Kit

AUTHORIZED DEALER

BRPCRD622198-BC-K

Manufacturer Part Number
*Images are for illustrative purpose only. Actual Product may differ.
SKU: REI-BRPCRD622198-BC-K
Please select a vehicle to verify fitment.

Please Select a Vehicle

This will be used to show you compatible parts.

Auto Parts Finder

This product doesn't fit your selection!

The product shown on this page is not compatible with the selected vehicle

!
To ensure proper parts fitment, please browse compatible products or change your selection.


Change Current Selection
FREE Shipping*
Standard Warranty

This brake kit contains:

  • 2 brake rotors (2 wheels)
  • 4 brake pads (2 wheels)
  • Brake pad hardware (where applicable)
CA $1,128.00  MSRP
CA $620.40  PRICE
Manufactured
1-3 Weeks
CA $496.32
56%
SAVINGS
Performance Black Cross Drilled Brake Rotors with Carbon Pads Kit is available to buy in increments of 1
AUTHORIZED DEALER

BRPCRD622198-BC-K

Manufacturer Part Number

Mill Balanced

Delivering a virtually perfect balance for better stability, smoother stopping and minimal vibration.

Countersunk Holes

Promote heat distribution by increasing the external surface area of each holes.

Symmetric Vane Castings*

Providing higher thermal efficiency while resulting in better rotor stability, superior braking power and improved safety.

Double Disc Ground

A near perfect DTV and taper free non-directional friction surface finish is obtained, ensuring parallelism and minimizing vibrations while providing better initial bite and more effective pad/rotor break-in.

Strategic Holes Placement

Cross drilled in-between vanes under close tolerances to allow for better cooling without affecting the disc structural integrity.

Corrosion Resistant Coating

Long lasting corrosion protection is ensured by either the E-Coat™ electro powdercoating or the Z-Coat™ zinc electroplating process.

Machined Finishes*

Hats and other external surfaces are entirely machined to provide better rotor balance while creating a smooth surface finish.

*Application Specific
Generic image for illustrative purposes only, actual product may differ.

Equals or Surpasses OEM

Reibung™ Premium rotors are manufactured to equal or surpass OEM part specifications. Each rotor was carefully engineered and crafted according to the original equipment specifications ensuring that all clearances and tolerances are respected for a perfect fitment. This allows for OE equivalent or better performance while resulting in a quick and easy installation.

Corrosion Resistance

Long lasting corrosion protection is ensured by either the E-Coat™ electro powdercoating or the Z-Coat™ zinc electroplating process. Both providing a smooth and appealing finish designed to withstand 400 hours of salt water exposure.1 Most rotors on the market still come uncoated or use standard phosphate finishes which only provide minimal protection against the elements as they were conceived to protect the rotors for the transportation and storage. As soon as installed on the vehicle, the heat and moisture render these finishes much less effective resulting in immediate corrosion. Reibung™ Premium coated rotors are a more durable alternative for a better peace of mind while adding value to the vehicle.

High Carbon Metallurgy

Reibung™ High Carbon brake rotors are also offered for certain vehicle applications. High Carbon, Chromium, and Molybdenum alloy resists cracking when subject to high heat, increases strength and friction couple which improves stopping performance. The advanced metallurgy behind the High Carbon rotors combined with high friction European style brake pads also greatly reduce the possibility of pad squeal.

Machined Finishes2

Reibung™ Premium rotors hats and other external surfaces are entirely machined. Compared to uneven bare cast iron, this additional process provides better rotor balance while creating a clean and smooth surface finish.

Double Disc Ground

Reibung™ Premium rotors friction surface area is double disc ground to minimize thickness variations and vibrations. A near perfect disc thickness variation (DTV) is obtained by double disc grinding which ensures parallelism and eliminates run out providing quieter and smoother stops. This taper free finish leaves a non-directional finish which results in better initial bite and in more effective pad/rotor break-in. RMS = 64.3 or Ra = 1.6 micro-meters (63 micro-inches) is the nominal production standard for surface Roughness.

Mill Balanced

Mill balanced to a tolerance of less than 2oz.inch, Reibung™ Premium rotors deliver a virtually perfect balance for better stability, smoother stopping and minimal vibration.

Symmetric Vane Castings2

Proper heat transfer and thermal efficiency of center-split core casting results in better rotor stability, superior braking power and improved safety.2

OE Vane Structure Design

Specific rotors vane structure has been engineered to match the original equipment design specifications. This ensures the rotors will behave as the original part was intended to.2

Direct Fitment Application

Reibung™ Premium rotors are designed for direct OEM replacement. They are guaranteed to fit the original equipment with respect to all dimensional clearances. This allows for standard easy installation process as no modifications are required.

Reduced Noise & Dust

Formulated to provide better noise abatement while reducing dust resulting in a more pleasant ride with cleaner wheels and contributing to the proper functioning of the brake components without sacrificing performance.

High Performance

Premium vehicle specific carbon-metallic/ceramic friction compound formulations are delivering the best overall braking performances. Designed, engineered and manufactured to exceed OEM standards, these are providing a high friction level and temperature fade resistance.

100% Asbestos-Free

Reibung brake pad formulas are all 100% asbestos-free. Although still used in the brake industry, asbestos fibers are recognized as highly toxic and are extremely hazardous to human health.

Shimmed*

Precision cut/shaved backing plates and mechanically attached shims ensure proper fitment with the caliper while dampening vibrations and eliminating noise.

Positive Mold Technology

Manufactured using the same positive molding process utilized by OEM to provide consistent fade-free performance and predictable braking.

Chamfered*

Improving pad/rotor engagement significantly reducing vibrations and noise while preventing "edge lifting".

Post Cured & Scorched

Ensuring consistent performance throughout the brake pad service life and speeding up the bedding in process by pre-burning off gases and excess resins.

Slotted*

Adds flexibility to the pad preventing heat expansion cracks while promoting water and friction debris evacuation.

*Application Specific
Generic image for illustrative purposes only, actual product may differ.


CANADIAN OWNED & OPERATED

Reibung™ is known as a leading independently owned and managed Canadian manufacturer and distributor of premium and performance brake components. Most rotors are manufactured in ISO9002 / QS9000 / TUV World Standards compliant factories located in the provinces of Quebec and Ontario, Canada.


1Based on independent laboratory tests.
2Fitment specific
More Information
Manufacturer Reibung
Manufacturer Part Number BRPCRD622198-BC-K
Manufacturer's Suggested Retail Price (MSRP) 1,128.00
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
This table represents all the 25 compatible vehicles for this part:
MakeModelYear
Application Notes
PositionSubmodelAdditional Information
BMW
540i2020
  • Rear
  • 345mm Rear Discs
  • M Sports Brakes
  • Full Cast Replacement Discs
  • 2-Piece Factory Discs
  • Qty per Vehicle: 1
BMW
540i2021
  • Rear
  • 345mm Rear Discs
  • M Sports Brakes
  • Full Cast Replacement Discs
  • 2-Piece Factory Discs
  • Qty per Vehicle: 1
BMW
540i2022
  • Rear
  • 345mm Rear Discs
  • M Sports Brakes
  • Full Cast Replacement Discs
  • 2-Piece Factory Discs
  • Qty per Vehicle: 1
BMW
540i2023
  • Rear
  • 345mm Rear Discs
  • M Sports Brakes
  • Full Cast Replacement Discs
  • 2-Piece Factory Discs
  • Qty per Vehicle: 1
BMW
740i2021
  • Rear
  • 345mm Rear Discs
  • M Sports Brakes
  • Full Cast Replacement Discs
  • 2-Piece Factory Discs
  • Qty per Vehicle: 1
BMW
740i2022
  • Rear
  • 345mm Rear Discs
  • M Sports Brakes
  • Full Cast Replacement Discs
  • 2-Piece Factory Discs
  • Qty per Vehicle: 1
BMW
740i xDrive2021
  • Rear
  • 345mm Rear Discs
  • M Sports Brakes
  • Full Cast Replacement Discs
  • 2-Piece Factory Discs
  • Qty per Vehicle: 1
BMW
740i xDrive2022
  • Rear
  • 345mm Rear Discs
  • M Sports Brakes
  • Full Cast Replacement Discs
  • 2-Piece Factory Discs
  • Qty per Vehicle: 1
BMW
M550i xDrive2020
  • Rear
  • 345mm Rear Discs
  • Full Cast Replacement Discs
  • 2-Piece Factory Discs
  • Qty per Vehicle: 1
BMW
M550i xDrive2021
  • Rear
  • 345mm Rear Discs
  • Full Cast Replacement Discs
  • 2-Piece Factory Discs
  • Qty per Vehicle: 1
BMW
M550i xDrive2022
  • Rear
  • 345mm Rear Discs
  • Full Cast Replacement Discs
  • 2-Piece Factory Discs
  • Qty per Vehicle: 1
BMW
M550i xDrive2023
  • Rear
  • 345mm Rear Discs
  • Full Cast Replacement Discs
  • 2-Piece Factory Discs
  • Qty per Vehicle: 1
BMW
X52019
  • Rear
  • xDrive40i
  • 345mm Rear Discs
  • M Sports Brakes
  • Full Cast Replacement Discs
  • 2-Piece Factory Discs
  • Qty per Vehicle: 1
BMW
X52022
  • Rear
  • xDrive45e
  • M50i
  • 345mm Rear Discs
  • M Sports Brakes
  • Standard Brakes
  • Full Cast Replacement Discs
  • 2-Piece Factory Discs
  • Qty per Vehicle: 1
BMW
X52023
  • Rear
  • xDrive45e
  • M50i
  • 345mm Rear Discs
  • M Sports Brakes
  • Standard Brakes
  • Full Cast Replacement Discs
  • 2-Piece Factory Discs
  • Qty per Vehicle: 1
BMW
X62020
  • Rear
  • xDrive40i
  • xDrive50i
  • 345mm Rear Discs
  • M Sports Brakes
  • Full Cast Replacement Discs
  • 2-Piece Factory Discs
  • Qty per Vehicle: 1
BMW
X62021
  • Rear
  • xDrive40i
  • 345mm Rear Discs
  • M Sports Brakes
  • Full Cast Replacement Discs
  • 2-Piece Factory Discs
  • Qty per Vehicle: 1
BMW
X62022
  • Rear
  • xDrive40i
  • 345mm Rear Discs
  • M Sports Brakes
  • Full Cast Replacement Discs
  • 2-Piece Factory Discs
  • Qty per Vehicle: 1
BMW
X62023
  • Rear
  • xDrive40i
  • 345mm Rear Discs
  • M Sports Brakes
  • Full Cast Replacement Discs
  • 2-Piece Factory Discs
  • Qty per Vehicle: 1
BMW
X72019
  • Rear
  • xDrive40i
  • 345mm Rear Discs
  • Standard Brakes
  • Without M Sports Brakes
  • Full Cast Replacement Discs
  • 2-Piece Factory Discs
  • Qty per Vehicle: 1
BMW
X72020
  • Rear
  • xDrive40i
  • xDrive50i
  • 345mm Rear Discs
  • Standard Brakes
  • Without M Sports Brakes
  • Full Cast Replacement Discs
  • 2-Piece Factory Discs
  • Qty per Vehicle: 1
BMW
X72021
  • Rear
  • xDrive40i
  • 345mm Rear Discs
  • Standard Brakes
  • Without M Sports Brakes
  • Full Cast Replacement Discs
  • 2-Piece Factory Discs
  • Qty per Vehicle: 1
BMW
X72022
  • Rear
  • xDrive40i
  • 345mm Rear Discs
  • Standard Brakes
  • Without M Sports Brakes
  • Full Cast Replacement Discs
  • 2-Piece Factory Discs
  • Qty per Vehicle: 1
BMW
X72023
  • Rear
  • xDrive40i
  • 345mm Rear Discs
  • Standard Brakes
  • Without M Sports Brakes
  • Full Cast Replacement Discs
  • 2-Piece Factory Discs
  • Qty per Vehicle: 1
BMW
X72024
  • Rear
  • xDrive40i
  • 345mm Rear Discs
  • Standard Brakes
  • Without M Sports Brakes
  • Full Cast Replacement Discs
  • 2-Piece Factory Discs
  • Qty per Vehicle: 1